Wyniki wyszukiwania: cx1

Sortowanie

Liczymy pasujące modele…

P
PrintablesBradW

Axial SCX10III Early Bronco Seat Back

I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.

Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
3
Ocena
0
P
Printablesdaver18qc

1/10 Scale Bumper Jack SCX10

* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…

Pobrania
1320
Polubienia
315
Ocena
4,89
P
Printablespolymech3D

Armadillo Off-Road Truck 1/10 body for SCX10 III

Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…

Pobrania
849
Polubienia
246
Ocena
5
P
Printablesxboxsniper22

SCX10 Pro Frame

It's very close to the original and can be used as a template to create other parts.

Pobrania
750
Polubienia
62
Ocena
0
P
PrintablesRobert Posey

Scx10 chassis

Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…

Pobrania
683
Polubienia
62
Ocena
0
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Pobrania
586
Polubienia
55
Ocena
0
P
Printablesahead_RC

SCX10 iii Gladiator Flatbed

Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…

Pobrania
470
Polubienia
96
Ocena
5
P
PrintablesRevellio

Custom Crawler Chassis based on SCX10 Carbon Rails

General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…

Pobrania
455
Polubienia
73
Ocena
0
P
PrintablesNie9001

FCX18-1/18 Scale RC Toolbox

I made this toolbox specifically to fit the FCX18 FMS LC90 roof rack. Toolbox should be good for all 18 scale RC.

Pobrania
446
Polubienia
71
Ocena
5
P
PrintablesJohn Doe

FCX18 Wheel Wells and Shock keys

Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…

Pobrania
443
Polubienia
17
Ocena
0
P
PrintablesRevellio

AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts

Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…

Pobrania
411
Polubienia
53
Ocena
0
P
Printablesjt001sk

FMS FCX18 LC80 inner fenders

FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…

Pobrania
358
Polubienia
23
Ocena
0
P
PrintablesRMTCTRL

Cantilever Suspension for Axial SCX10

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…

Pobrania
353
Polubienia
97
Ocena
0
P
PrintablesZanthrax

Hinged body mount for Axial SCX10III Early Bronco

Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…

Pobrania
351
Polubienia
30
Ocena
5
P
PrintablesBrainanator

SCX10 Skid Plate. High Clearance, Flat Bottom

Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…

Pobrania
312
Polubienia
18
Ocena
0
P
PrintablesTebonr

FCX18 Suspension Mod

Description: I designed these “Flex Blade” arms to get more travel out of the stock suspension when using the stock shocks. I have Treal 4 link arms installed, but it should work the same with the stock links. The mounting for the flex…

Pobrania
309
Polubienia
35
Ocena
0
P
PrintablesDasumocat

Axial SCX10ii 1/10 scale Jeep front bumper

I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…

Pobrania
287
Polubienia
42
Ocena
0
P
PrintablesRobert Posey

SCX10 Hotrod body

This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…

Pobrania
279
Polubienia
39
Ocena
0
P
PrintablesJimjo

SCX10 III - High Clearance Bumper

High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…

Pobrania
260
Polubienia
24
Ocena
0
P
PrintablesCosmos Darkstar

SCX10 II comp rock sliders

These sliders were perfect but they were too wide for the comp truck body so I made them smaller.

Pobrania
232
Polubienia
14
Ocena
0
P
Printablestaeraeyttaejae

Axial SCX10II front chassis front bumper mount

Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…

Pobrania
215
Polubienia
15
Ocena
0

SCX10.2 to RC4WD Xtra Cab body mounts

Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…

Pobrania
211
Polubienia
22
Ocena
0
P
PrintablesCatch222

FCX18 K10 Frontbumper IB Style

Normaly the bumper can print with the standard nozzle 0.4. But for good faces , you have to place it on the build plate in a angle from 39.50° . The tube was cutted in two part and print with a 0.2 nozzle. For the frontlight pls print…

Pobrania
210
Polubienia
13
Ocena
0
P
PrintablesTeamK

Axial Capra and SCX10.3 - Mini-T Spring Perches

If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…

Pobrania
205
Polubienia
20
Ocena
0
P

FMS FCX18 LC80 Shock keys

The stepfile is only the left side. Just mirror the side for the other. printed without support.

Pobrania
203
Polubienia
17
Ocena
0
P

Axial SCX10 III Portal AR45P Axelstand Rc Crawler

Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…

Pobrania
196
Polubienia
27
Ocena
5
P
PrintablesCatch222

FCX18 K10 Rearbumper IB style

Normaly the bumper can print with the standard nozzle 0.4. Support is recommended.

Pobrania
184
Polubienia
16
Ocena
0
P
Printablesbricoletout

Bumper AXIAL SCX10 II (2) (AX31392 and AX31393 substitute)

Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…

Pobrania
182
Polubienia
24
Ocena
5
P
PrintablesOzzy

80mm Wide Drop Hitch Mount For RC Crawlers / Scx10 / custom

-uses m3 screws -can be flipped upside down so the text is not visible -The pintle hitch mount is for this pintle hitch!! https://www.printables.com/model/279936-18-scale-110-scale-pintle-and-pintle-ball-combo-tr/files

Pobrania
171
Polubienia
38
Ocena
0
P
PrintablesDoom_Gloom

FMS FCX18 Shock tower/keys

Drew these up myself for ease of printing. STL is left and right. Same file is compatible with front and back. May require 180degree rotation in slicer to make it easier to print. Enjoy.

Pobrania
168
Polubienia
13
Ocena
0
P
Printablesjt001sk

FMS FCX10 bumpers with integrated mount

FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…

Pobrania
166
Polubienia
20
Ocena
5
P
PrintablesBen

Axial SCX10 iii Basecamp Rock Rails

These are rock sliders that can be installed on the Axial SCX10 iii Basecamp. I printed these from Prusament PLA as a prototype and have yet to break them. If they break, I plan to use some Prusament PC blend CF. You will need two M3x10…

Pobrania
166
Polubienia
24
Ocena
0

SCX10.2 Flat Skid for Vanquish VFD(original) transmission

Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…

Pobrania
153
Polubienia
10
Ocena
0
P

Roof Rack For AXIAL SCX10 III JEEP JLU WRANGLER Rc Crawler

Scale accessory for Axial SCX10 III Jeep JLU Wrangler. Roof rack that can be mounted in the front, middle, or rear of the roof. There are two mounting options: either using double-sided adhesive tape or by screwing it directly through the…

Pobrania
151
Polubienia
23
Ocena
0
P
PrintablesBen

SCX10 III Basecamp Front Bumper -- Pinched

This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…

Pobrania
150
Polubienia
17
Ocena
5
P
PrintablesDr.Jeckyl

SCX10.2 3 gear transmission wedge for GSpeed skid and rails

A wedge to raise the motor up away from the rails when using a HobbyWing Fusion with GSpeed skid plate and chassis rails. The opo named files tilt the transmission side to side while the other files tilt the transmission front to back.…

Pobrania
148
Polubienia
11
Ocena
0
P
PrintablesC4 Designs

SCX10 SawHorse Stand

PLA for indoor use. 2 or 3 walls depending on nozzle diameter, 20% to 24% your favorite infill. No Supports Required (4ea Required) Saw Horse Stand Vertical Piece (2ea Required) Saw Horse Stand Horizontal Piece (8ea Required) 3mm x 10mm…

Pobrania
147
Polubienia
24
Ocena
0
P
PrintablesDuaneL

Refined Jeep Wrangler front bumper with Bull Bar for SCX10

I tweaked the original so it would line up better on the SCX10 II, then replaced the stinger with a bull bar and tweaked the bumper to fit the frame more closely and allow better approach angle. TinkerCAD for front bumper:…

Pobrania
138
Polubienia
22
Ocena
0
P
Printableshrafengrim

SCX10-scx24 Pro Frame conversion

downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.

Pobrania
137
Polubienia
32
Ocena
0
P
PrintablesCatch222

FCX18 K10 Rollbar

So this is my first part for the FCX18 K10. In this case there will follow some more.

Pobrania
133
Polubienia
12
Ocena
0
P
PrintablesAlesna33
Pobrania
127
Polubienia
17
Ocena
5
P
Printables3DFreeman

Atari CX10 CX40 Joystick - STL VERSION! - Using Arcade Parts

STL VERSION RELEASED! - It is time (after 2+ years) for this model to be freed from my Patreon I grouped the three handle versions together because I couldn't stop them from laying on their side in the slicing software and it's a pain to…

Pobrania
125
Polubienia
27
Ocena
0
P
PrintablesRobert Posey

SCX10 Kit transmission

Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…

Pobrania
124
Polubienia
17
Ocena
0
P
Printablesmichbart

Adjustable Battery Tray for Axial SCX10 III Coyote

Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…

Pobrania
112
Polubienia
14
Ocena
5
P

Roof Rack For AXIAL SCX10 III Jeep JLU Wrangler v2 Rc Crawler

This is a new roof rack that uses the same mounts as my previous model. The idea is that you can replace the roof rack without having to modify the mounts if you have drilled and screwed them into the car body. Link to previous model:…

Pobrania
109
Polubienia
17
Ocena
0
P
PrintablesCatch222

FCX18 K10 Toolbox

Here is my version of a simple toolbox for the fcx18 K10. Printed with a 0.4mm nozzle,heights of 0.16 or 0.12. Filament could be a silver silk one. Top parts must be glued.

Pobrania
107
Polubienia
14
Ocena
0
P
PrintablesKXNT

Bead lock ring for Axial SCX10

Fits Axial 1.9 bead lock wheels. Category: R/C Vehicles

Pobrania
106
Polubienia
14
Ocena
5
P
PrintablesRandom Letter

FCX18 K10 Front Bumper

This model is a front bumper for the FCX18 K10 and can be installed using the original hardware. I printed it in PETG-CF, but any material should work. I used a 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, and 15% infill. There are…

Pobrania
104
Polubienia
4
Ocena
5
P
PrintablesSebastian p

Rockslider SCX10 Jeep Cherokee

Habe mir zwei Rock Slider erstellt. Abgestimmt auf den Jeep Cherokee von Axial (SCX10). Vorteil: man kann die Karosserie in den Rock Slider klemmen und die Seitenschweller in der Breite einstellen. Karo klappert nicht so, einstellbare…

Pobrania
103
Polubienia
15
Ocena
0
P
PrintablesMercys Artworks

Self designed body for Axial SCX10 313mm

I play a little with the thinkercat and designed a body for an Axial SCX10

Pobrania
99
Polubienia
12
Ocena
0
P
PrintablesCaiben

SCX10 Front Bumper

A simple front bumper for a SCX10, have not tried it on a SCX10-2 as of now. You can print it without supports but it may not be optimal for the end quality. There are also holes for 2x 5mm leds.

Pobrania
99
Polubienia
8
Ocena
5
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 XD Style

Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for R/C car 12mm hex

Pobrania
98
Polubienia
23
Ocena
0

Axial SCX10 Front battery tray

Secure mount for a battery in the front of the SCX10. Uses 4x M3 screws. Sized for a 5000mAh box LiPo. I can alter the size for different batteries, just shoot me a message. The Basecamp body still fits in this configuration but I can't…

Pobrania
96
Polubienia
22
Ocena
0
P
PrintablesAndoo

Mojave cab on SCX10 ii

This is a full back of cab for a RC4WD Mojave body and Skids that will work on an SCX10 ii or similar to mound the cab using screws there are optional brackets to mount the back using screws or you can just glue in place.

Pobrania
92
Polubienia
12
Ocena
0
P
PrintablesMaxxDesigns

Scx10 ii Servo and Servo Winch Mount for Forward Trans Flip

I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis. Steering servo in stock position and a servo winch flat and as low as can fit up front on the chassis. You may have to space your servo up depending…

Pobrania
91
Polubienia
13
Ocena
0
P
PrintablesSherkmake

AXIAL SCX10 Ball Joint

AXIAL SCX10 Ball Joint nozzle 0.25 or smaller

Pobrania
88
Polubienia
21
Ocena
5
P
PrintablesSuperKushGod

FMS FCX18 Lc80 trailer hitch/tow ball

Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.

Pobrania
87
Polubienia
15
Ocena
0
P
PrintablesZanthrax

SCX10II mount for RC4WD 4Runner body

Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…

Pobrania
87
Polubienia
21
Ocena
0
P
PrintablesRoboRay

FCX18 LC80 V2 Body Wheel Wells and Shock keys

Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…

Pobrania
86
Polubienia
7
Ocena
0
P
PrintablesMaxxDesigns

Scx10 Transmission Motor Flip Mount

Motor flip mount for the original scx10 transmission, A little bit thicker in design then my 10.2 style flip mount but otherwise a similar design. Should also fit 10-14 pinion, maybe a bit more and a bit less. I also mirrored my trans…

Pobrania
84
Polubienia
11
Ocena
0
P
PrintablesKXNT

1:10 Scale RC Toolbox 2 Craftyman Axial SCX10

Simple 1:10 Toolbox for scale RCs. Category: R/C Vehicles

Pobrania
84
Polubienia
18
Ocena
0
P
PrintablesMaxxDesigns

Scx10 ii Transmission and Motor Flip Mounts

Flip your 10 ii kit transmission and motor forwards for the best cg! The motor flip mount fits a good range of pinions, 10-14 at least, maybe a bit lower and higher. The motor mount is pretty solid as long as you print it pretty thick, 5+…

Pobrania
81
Polubienia
19
Ocena
0
P
PrintablesTurboTaco2JZ

Long travel shock mounts for Axial SCX10 2

Remix of SCX10.2 shock front hoops by justicedspencer This is the V1.0 of shock hoops for the SCX10 2 that allows for near 1:1 motion ratio and scale angle shocks (straight up and down, not angled) and allows for long shock travel while…

Pobrania
81
Polubienia
13
Ocena
0
P
PrintablesBoggz Crawler

FMS FCX18 / FCX24 LC80 Wall Mount

FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…

Pobrania
78
Polubienia
14
Ocena
5
P
PrintablesBoiledtea

Ikea Skadis Scx24/fcx24m/trx4m/ascent18/fcx18/fcx24 Holder

Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…

Pobrania
76
Polubienia
17
Ocena
0
P
PrintablesRevellio

Custom Trail Finder 2 Chassis based on SCX10 Carbon Rails / Wheelbase 11,2" (284mm)

general description The chassis geometry is 100% identical to the original RC4WD Trailfinder 2 (11.2"). All mounting points, bumper mounts, body mounts, shock mounts, and leaf spring hangers are 100% RC4WD compatible. The Gearbox. Only…

Pobrania
73
Polubienia
13
Ocena
0
P
PrintablesWildManMakes

3S Battery tray for SCX10/ SCX10ii/ SCX10iii

Battery tray to take the big hard case 5200mah 3S lipo batteries, mounts to the original tray mounting points on the right hand side, made it as low as possible without cutting original splash guard, 3mm walls, print with supports.

Pobrania
73
Polubienia
8
Ocena
0
P
PrintablesBradW

China JK Magnet Body Mount GCM Skeleton SCX10 Axial

Add magnets to your GCM Racing J2 Skeleton Chassis with China JK body for quick and easy removal. Holds great. I also added an area for the on/off switch to go. Can be trimmed if not needed. You will need to drill 4 holes in your chassis…

Pobrania
71
Polubienia
9
Ocena
0
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 All XD series style

Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for 12mm hex R/C vehicle.

Pobrania
71
Polubienia
14
Ocena
5

SCX10 shock mount extension

Shock extensions based on aluminum aftermarket ones. 3 files are included - the specific setup I have for front and rear, and a universal one for more adjustment options. You will need 2x M3x10 screws for each extension, so 8 total if…

Pobrania
68
Polubienia
15
Ocena
0
P
PrintablesKXNT

Axial SCX10 bead lock Spyder lock 1.9

Fits Axial's 1.9 bead lock wheel. PoisonSpyderRings_V2_1_fixed: recessed holes for screw heads, larger inner circle. PoisonSpyderRings_2: standard bead lock, smaller inner circle. Category: R/C Vehicles

Pobrania
67
Polubienia
12
Ocena
0
P
PrintablesMALPAN

Meile CX1 handle retaining clip

Being the sucker I am, I spent too much money on a vacuum to only have it break within a couple of weeks of owning it. This model replaces it with something that requires much less parts and has been more reliable. Print Parameters:…

Pobrania
67
Polubienia
4
Ocena
0

scx10 front lower links 120mm

this link works great with the ball bearing that you can find on printables if you type in scx10 all my links that are 1/10th uses them and in the hole with minimal filing. Printed in PLA then PETG 100% Enjoy! MRC

Pobrania
64
Polubienia
11
Ocena
5
P
PrintablesCrazytiti

SCX10 ting tong 14, 16, 20° C-HUB + 3 links mod

2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures. Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel. Use the v3 and the servo…

Pobrania
60
Polubienia
11
Ocena
0
P
PrintablesIonNight

Axial SCX10 center mount for CNC Aluminium 2:1 Transfer Case

Imported from my designs on Thingiverse. Original upload was 18.07.2019 (dd.mm.yyyy) I do most mechanical design. Can do easy basic patching. Mount/bracket for your "CNC Black Aluminium Transfer Case" with mostly 2:1 gear ratio. It has…

Pobrania
55
Polubienia
11
Ocena
0
P
PrintablesCatch222

FCX18 K10 Frontgrill Details

This parts are detail for FCX18 K10 frontgrill. Look at picture of the positioning. Parts will be print with a 0.2 mm nozzle. Parts must be glued in the original grill.

Pobrania
55
Polubienia
4
Ocena
0

scx10 Rear upper link 125mm Bent link

Easy to print may require a small amount of filing to fit the ball joint in. Have fun! MRC.

Pobrania
54
Polubienia
8
Ocena
0
P
Printablesjt001sk

FMS FCX18 LC80 inner fenders

FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesKXNT

1.9 bead lock wheel for Axial SCX10 or Wraith. 12mm Hex

WORK IN PROGRESS. Just want to share. 1.9 Bead Lock Wheel Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be…

Pobrania
53
Polubienia
9
Ocena
0
P
PrintablesSir Ged

Bumper Brackets for Axial SCX10 Rock Crawler

These are bumper brackets for the Axial SCX10. Made these so that I could extend both the front and back to fit a new body. Also added stabilizers to use towards the battery holder as I had to move mine to the front. The battery holders…

Pobrania
52
Polubienia
8
Ocena
0
P
PrintablesDasumocat

Axial SCX10 RC DC front bumper winch plate mount

This adapter will fit RC4WD 1/10 scale Warn winch to the RC DC front bumper for an Axial SCX10. I will download the RC DC front bumper file and give credit in a separate model profile.

Pobrania
52
Polubienia
13
Ocena
0
P
PrintablesKXNT

Beadlock Wheel 1.9 for SCX10 GMC All Terrain Style

1.9 Beadlock wheel 12mm hex. Uses Vanquish Products SLW style hub to mouth to hex. Modeled to match my Full size truck wheels. The file ending with BIS has a support structure already built up to support the print Category: R/C Vehicles

Pobrania
51
Polubienia
11
Ocena
0
P
PrintablesRevellio

RC Crawler Link Board / TRX4 / SCX10II / Building Tool for Crawler Links

general I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length. That's exactly what these tools are for. Currently only available for the TRX4…

Pobrania
49
Polubienia
5
Ocena
0
P
PrintablesRon Benecke

Beovox CX50 CX100 foam

Refoamhelp PLA 0.3

Pobrania
49
Polubienia
3
Ocena
0
P
PrintablesKXNT

Beadlock Wheel 1.9 8 hole for SCX10

8 hole beadlock wheel for 12mm hex RC vehicle. Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be found here:…

Pobrania
49
Polubienia
8
Ocena
5
P
PrintablesDrexplotionpd

Axial SCX10.2 Tamiya body slider

I wanted to be able to mount a Tamiya f350 body on my axial based 6x6. So I came up with a factory ish option to be able to mount it. Bolts on just the same as axial sliders and has side screws for the Tamiya holes. You can also use long…

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesMacLemon

Axial SCX10 Shock Seals

Axial SCX10 Shock Seals The SCX10 factory shocks are well known for their terrible leaking. I've tried a very simple approach at fixing this issue by replacing the spacers beween the O-rings at the shock body bottom. After this simple…

Pobrania
47
Polubienia
9
Ocena
0
P
PrintablesTux Stang

FMS FCX10 LC80 exhaust

Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.

Pobrania
45
Polubienia
5
Ocena
0
P
PrintablesRobert Posey

Scx10 more universal body and bumper mounts

an upgrade to Ascender body mounts for SCX10 II https://www.thingiverse.com/thing:3210534 These should be more universal to different lengths of bodies. part A screws to part B, separated for strength. Bumpers can be found here…

Pobrania
39
Polubienia
8
Ocena
0
P
PrintablesSewad

SCX10 front center battery tray

battery tray mounted in the front and center I printed mine in ABS, but really anything would work. I printed it with the small closed end on the bed seems to work well. You will need longer m3 bolts

Pobrania
38
Polubienia
2
Ocena
0
P
Printablescarlosmakes1

SCX10 FRONT MOTOR AND TRANSFER CASE

Front motor mount for injora gearbox , others should fit. Needs M3 square nuts and m3 screws. Transfer case, use parts from the SCX10 gearbox ( bearings and gears ) . M3 x 30 screws and nylocks. Grease if you want. It slows the rig down…

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesTux Stang

FCX10 LC80 rear bumper mount

Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)

Pobrania
37
Polubienia
4
Ocena
5
P
PrintablesRobert Posey

SCX10 Hotrod Grill and Servo Mount

This is a front bumper / grill for an scx10 hot rod build. it includes a servo mount under the grill. I haven't printed it yet to know how well it fits, but it should be good. There is a pretty good remix of this over here…

Pobrania
37
Polubienia
13
Ocena
0
P
PrintablesGreenRanger090

Axial SCX10.3 CJ7 Windshield Frame

A roll cage style bar that sits inside of the lexan of the windshield on the Axial Scx10.3 CJ7. descrete and provides ample protection to keep your widnshield form getting caught on rocks and ripped off. made because my friend and i have…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesTux Stang

FMS FCX10 LC80 mudflaps

Print in TPU. Glue to the rear lip of the rear inner fenders.

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesSunfm

Bruder 5th wheel hitch adapter for Axial SCX10

My kids have a bunch of the Bruder brand toys including the big lowbed trailer. I thought it would be fun to tow it with my Axial SCX10 RC truck. I wanted something simple that bolted on easily. I found someone had already designed the…

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesItsJustJoe

SCX10 II Transmission Skid Plate - 3 Versions

SCX10 II style transmission skid plate available in three different versions. One has built in mounting tabs for the rear upper links which can conflict with some longer motors. The second has no tabs and will require the use of a nut to…

Pobrania
32
Polubienia
3
Ocena
3
P
Printablesdachnlk

Bumper mount for Remo Hobby Trophy/Axial scx10

Эту модель я сделал, чтобы переместить бампер ближе к кузову, так модель выглядит лучше, а также улучшает внедорожные качества. Для печати я использовал abs gf. Но вы также можете использовать abs/petg. Для большей прочности используйте…

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesTurboTaco2JZ

Body Mount Add-on for Long travel shock mounts for Axial SCX10 2

This is an add-on for body post/mounts if you printed my remixed long travel shock mounts/hoops ( https://www.printables.com/model/730892-long-travel-shock-mounts-for-axial-scx10-2 ) These just bolt onto the inside of the shock mount.…

Pobrania
28
Polubienia
3
Ocena
0