30 781 modeli
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
simple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary. Print instructions You will need 4 for a stable stack. I print was done in PET-G, 0,2mm layer on a MK3s. Print works well without support. Update…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter to use mini vacuum accessories with a Dyson Vacuum. It snaps in nicely, just as any other Dyson accessory. I also made a mini crevice tool posted separately. https://www.prusaprinters.org/prints/150050-mini-crevice-tool
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am using the Sunlu Dryer for storing and using my filament. But the simple hole for letting the filament out is not enought. To fix this I designed an adapter to connect a pc4m10 or pc6m10 (conical) pneumatic connection. The hole being…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Airsoft Adapter from M12 CCW to M14 CCW
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Out of AA batteries but have AAA's? Country in lockdown or you don't want to risk getting COVID-19 going to the store? Well, I've created a AAA to AA adapter. All you need is a 3d printer, a AAA battery and some tin foil/pop can. Print…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
This is a 3D printable 1/4" to 3/8" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 3/8" to 1/4” adapter here. Important Update: I’ve created a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Arctis Nova Pro uses a different ear cup mounting mechanism than past headset versions, preventing the use of existing replacement ear cups. Along with the availability of compatible replacements only using faux leather (hot and…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Standard 1:10 RC car wheel adapters. Print instructions 3D printed tires weren't cutting it for us on our OpenRC F1 cars. I made these adapters so we could mount cheap, standard 1:10 RC street tires and wheels on them. We've only just…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Thule Chariot and Urban Glide cup holder adapter for the Bugaboo cup holder (https://www.bugaboo.com/us-en/accessories/holders-and-trays/bugaboo-cup-holder-MI001906.html). The adapter is designed to fit the Bugaboo cup holder, but can…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
Wydruk około 4,42 €–5,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple and quick print. Prints in-place, no need for any supports. Print it with 4 perimeters and 100% infill, to be a bit stronger/heavier. After printing make sure to work it out a bit manually so it moves freely. Mounting instructions…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Wydruk około 7,15 €–8,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model to utilize spare mason jars around the house. The watering spike keeps the water coming out at a slow enough pace to where you can set, forget, and not have to worry about watering your indoor plants for a *period of…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena jednego wariantu
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
“Milspec” Bug A Salt 3.0 Stock Adapter In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter is made so it's possible to fit an larger coffee cup in the front drink holders of a Skoda Enyaq. Not recommended to use PLA due the possible heat in the cabin in the sun.
Wydruk około 4,57 €–5,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Adapter for connecting a 6mm PTFE hose to a 4mm reverse bowden PTFE tube. The holes are 4.1mm or 6.05mm in diameter and approx. 10mm deep. They therefore form a friction fit after contraction during printing. A conical area is provided…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Air pump adapter to fit between a standard SUP-hand-pump hose and Ryobi ONE+ R18MI-0's low pressure, high flow side. (SUP = Stand Up Paddle Board). Pump hose side has a double sided thread, outer D=27.75 mm (1.09 inch), d=24.4 mm).…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was wondering if Quest 2 straps could be made compatible to the Quest 1. Indeed, it is possible. I liked the design of @sekazi (https://www.thingiverse.com/thing:4624192), but the adapter is movable, so I decided to make it 2mm longer…
Wydruk około 1,95 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
No pockets? No worries! If you like wearing leggins (or other clothes), you might find the absence of pockets rather frustrating. Do you own a quadlock phone case? This backpack (anything) strap adapter can hold your quadlock equipped…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite . It has 2 tabs for better attachment to the spool. No print support needed with this model. Print with 15% infill. It…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vacuum adapter that fits Ryobi orbital sander output to Ridgid shop vac Printed in PLA at 20%, worked pretty well so far for me. Designed from: https://www.thingiverse.com/thing:1246651
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
I've missplaced my original pool drain cap to garden hose adapter so I created one that may not look like the original… but it works. from what I've read online.. its the same as a few others.. like coleman
Wydruk około 2,74 €–3,34 € nettoWstępna wycena jednego wariantu
The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created the case to have the module ("EBUS to WiFi adapter module" by Daniel Kucera) protected from dust. You may buy the module here: https://lectronz.com/products/54 In the correct orientation all the parts can be printed without…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bike bottle cage/holder adapter to lower/raise cage mount. Use m5*12 screw, longer screw can damage your bike frame , always first try to install cage to adapter and see if screw does not stick out. Cage mounting holes are 64mm apart…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Adapter for 250g Spools: Sunlu, Jayo, Tinmorry, Eryone Designed for 250g spools from Sunlu, Jayo (plastic), Tinmorry, and Eryone (cardboard). Sunlu and Jayo share plastic spools, Tinmorry and Eryone share cardboard ones. Remixed from…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted to use teslapunk's Flexible Segmented Vacuum hose with my Festool CT MIDI I so I remixed etinen's adapter to be merged into the original DN40 part from the Flexible Segmented Vacuum Hose. Update: Didn't like how tall the original…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter enables mounting of the G4 Instant in a corner. The original mount is attached to the adapter using 2 pcs of thread-forming screws with dimension B3x10. There is space behind the adapter for cable routing. Print the model…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Wydruk około 4,40 €–5,37 € nettoWstępna wycena jednego wariantu
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This adapter is usefull if you want to use the Gravity Spoolholder for single filament Prints without the noisy clonk sound 😏 Print instructions…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount for a pen plotter for the MK3s. Designed to snugly cover the Extruder motor, and can hold a pen of diameter up to 12mm. Will take 2x M3 Bolts/Square Nuts to lock the pen in place, and 2x M3 bolts/square nuts to hold the cover to…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is 61mm x 40mm
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This is a remix, the original model was made for ~35mm nozzles and didn't fit my 32mm ones, so I decided to create my own version of it. The diameter of the tip is 31.4mm and it increases to 32.2mm , it friction fits very nicely any 32mm…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
I no longer use my Minolta Maxxum 7000 because it's a film camera. If you are like me and have a substantial investment in AF lenses that you want to put back into service for your newer Canon that uses EF lenses, this is an awesome and…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Banish the clutter of electric toothbrush cords from your bathroom countertop with this sleek solution! If your spouse has been nudging you to tidy up and you own an Oral-B IO Series 6/7/8/9 toothbrush (the models sans a display charging…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this specifically for a 26.4 mm diameter stanchion dropper post for 1" straps, and later added a version for a 22 mm stanchion dropper post, both for 1" and 2" straps based on the requests of others. I had earlier purchased a…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ever needed to drain your washing machine because the pump got jammed? Yeah me too. Twice. In one month. Kids… Gotta love 'em! What I don't love is siphoning off a whole machine 1 liter at a time using buckets, so I decided to make this…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I (accidentally) printed this cup holder https://www.printables.com/cs/model/130989-cybex-cup-holder with this adaptor https://www.printables.com/cs/model/204281-thule-stroller-cup-holder-adapter and it does not fit each other at all.…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 04.April.2020: I uploaded the Fusion 360 file so that you can remix the design to better fit your own door handle or to adjust the text that is shown on the handle, if you want. Description: I wanted to print something that helps…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…
Wydruk około 4,02 €–4,92 € nettoWstępna wycena jednego wariantu
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
The stock fan on the M5 is a 30mm (24v) fan. Mine died after just a few days I replaced it with a larger WINSINN 40mm (24v) ball bearing fan WINSIN 40mm 24v Fan - Amazon This is the same brand as the stock 30mm fan WINSIN 30mm 24v Fan -…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This handy adapter let you use the SP-Connect sleeves with all kinds of GoPro accessories.
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
