Wyniki wyszukiwania: eris

Sortowanie

279 modeli

P
PrintablesJan

Peristaltic Pump (simple & working) for an automated fertilizer

Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…

Wydruk około 1,98 €–2,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
399
Polubienia
98
Ocena
4,5
P

Cabbage Moth Butterfly Scarecrow Decoy (Pieris rapae)

Meet your new butterfly army. Print this guy out and then print some more (he'd appreciate a few friends), suspend them above your precious vegetables and they will protect them from the scourge of the evil caterpillar horde. Learn about…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
287
Polubienia
27
Ocena
5
P
PrintablesMadeinSwabia

Bayerisch-Schwäbische Brezel

Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. By the way, there are several types of "Brezen”. This is the “bayerisch-schwäbische Brezel” You can find it in Schwaben, in the west of Bavaria…

Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
93
Polubienia
2
Ocena
0
P
Printablesjonlives

Parameterised Drawer Organiser

Remix of yaras' excellent drawer organiser to add a parameterised Fusion file for the main piece of the organiser since I wanted to use it in a different dimension drawer than the original, and a fix for the 4-leg connector to size it…

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
18
Ocena
0
P
PrintablesSDA

Wall mount for loudspeaker PreSonus Eris 3.5 Gen 2

The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…

Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
73
Polubienia
12
Ocena
5
P
PrintablesEPL

Drill bit stand - parameterised

A parameterised drill bit stand that can be mounted on a tool board. Features include with mounting holes to screw it to a tool board. with a label to print and stick on the front. that can be changed to hold your set of bits. that can be…

Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
18
Ocena
0
P
Printablesiczfirz

FIFA World Cup Trophy (No Infill Verison)

This is a further remix for noinfill. I printed it with 2walls only. Here you go the timelapse. Don't forget to subscribe my YouTube channel.

Pobrania
10 519
Polubienia
565
Ocena
4,89

V2 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…

Pobrania
1903
Polubienia
1488
Ocena
3,83
P
PrintablesJohn Phillips

Parameterised Under Desk Cable Management Tray

A fully parameterised cable management tray / cable holder for mounting under a desk. Includes screw holes or you can attach it using double sided tape. 40 and 75mm wide versions included (both 100mm long) along with the 3mf file if you…

Pobrania
1029
Polubienia
120
Ocena
4,75

V1 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…

Pobrania
1018
Polubienia
422
Ocena
4,2
P
PrintablesH3dSprint

Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar

All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…

Pobrania
1014
Polubienia
236
Ocena
4
P
PrintablesTate S

Drill Powered Peristaltic Pump, Gear Oil Transfer Pump

Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…

Pobrania
936
Polubienia
429
Ocena
5
P
PrintablesDaniel

Mini peristaltic pump for 28BYJ-48 stepper motor

This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…

Pobrania
840
Polubienia
124
Ocena
4
P
PrintablesGosga365

Cherish Ball Nintendo Switch Game Holder

A Nintendo Switch game cart holder. Designed for all the colored parts to be printed separately. If anyone wants to give it a shot in the MMU2, let me know and I can revise the files to align properly for that. Print instructions Print…

Pobrania
559
Polubienia
124
Ocena
3,33
P
PrintablesHaru_Creavita

Robot Hero - Animal Crossing Serise

Model Name : Robot Hero - Animal Crossing Serise Size : 190 mm Level : ★★★☆☆ Color Required : White, Black, Red, Yellow, Dark Gray, Silver, Cyan Designer : @Bread_Ryu 1) This model is based on an FDM 3D printer that must support TPU…

Pobrania
548
Polubienia
294
Ocena
0
P
PrintablesUppfinnarAXEL

Peristaltic Pump Simple

3d print a simple waterpump! This is a peristaltic waterpump with high pressure and low waterflow. I used it in a small automatic greenhouse where it connected to a spray nozzle. Hardware required: Yellow TT-motor (ideally low rpm and…

Pobrania
530
Polubienia
72
Ocena
4
P

Mirror of Erised picture frame, Harry Potter (no supports)

We revamped our Harry Potter Mirror of Erised, now its a beautiful picture frame that prints with no supports. Just in time for the holidays, hope you enjoy them as much as we have & all those we have already given them out to as gifts…

Pobrania
517
Polubienia
131
Ocena
4,75
P
PrintablesShane

Peristaltic Pump

This is a simple peristaltic pump I designed. It uses a 755 motor and 608 bearings that fits 3.2mm Bore Size Silicone tubing. The motor is mounted into the rear of the frame using M4 screws, The bearings and bearing mounts are friction…

Pobrania
464
Polubienia
101
Ocena
0
P
PrintablesZRNNN

Peristaltic Pump _ Nema 17 _ 608 Bearings

as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…

Pobrania
391
Polubienia
41
Ocena
0
P
Printablesxanoy

Periscope UA

Hi! We are from Ukraine!!! This is a low cost periscope for the Ukrainian army by Ukraine, to help Ukrainian soldiers. If you can and want to help us to print models for this device, please contact me (agree on quantity/time/delivery)!!!…

Pobrania
368
Polubienia
95
Ocena
5
P
Printablesmisan

Yet another peristaltic pump

To use together with a geared Nema17 stepper motor with a flanged 8mm output shaft like this one http://2.wlimg.com/product\_images/bc-full/dir\_37/1091420/geared-stepper-motor-1392929.jpg I am using 10mm OD surgical tubing. Action video…

Pobrania
338
Polubienia
28
Ocena
0
P
Printablestracejm

Low Profile Ceiling Register Air Deflector (F360 Parameterised)

A simple, low profile cover for a ceiling mounted HVAC register. Fusion 360 file (.f3d) provided so you can adjust parameters if required for your specific register. Model prints in two pieces if you only need one side; two pieces also…

Pobrania
316
Polubienia
44
Ocena
5
P
Printablesjpoles1

GrowFlow - NEMA 17 Peristaltic Pump

BOM: Note: incomplete, haven't had time to check exact fastener lengths: Bearing Assembly (Non-Print in Place Version): 1x M3 bolt + nut 3x M4 bolts + nuts 3x Needle Roller Bearings (4mm Bore Dia, 8mm OD, 8mm Width) Other: Silicone Tubing…

Pobrania
311
Polubienia
67
Ocena
3,5
P
PrintablesKilberisch

Parameterised Lista Trays

First of all, props to Lista optimized part trays von Marcel van der Boom which helped to inspire this Remix! The original model is a great solution for implementing a copy of the original trays sold for the Lista cabinets. I was missing…

Pobrania
298
Polubienia
24
Ocena
5
P
Printablesmilks

Glueless mini peristaltic pump

Based on off_grid_craft's design ( https://www.thingiverse.com/thing:3445927 ). These motors are small and cheap and will stall if the pump is run too fast. Produces a very slow, precise and reliable flow rate. I have mine operated by an…

Pobrania
295
Polubienia
68
Ocena
5
P
PrintablesiRaiFx

Honda Fuse Puller (Long verison)

I liked the Original design but i found out that it was short for my liking, so i extended it little bit and made the bottom flat so i don't use support or deal with overhangs. All right goes to Chienline for the Original design Category:…

Pobrania
289
Polubienia
22
Ocena
0
P
PrintablesJoerg_H

Speaker Stand for Monitor Speakers (here: PreSonus Eris E3.5)

Speaker Stand for Monitor Speakers The Problem: if Monitor Speakers sit flat on a tabletop, the sound is not directed towards the ears. My Solution: incline the speakers upwards so that they are pointing straight towards the head of the…

Pobrania
270
Polubienia
50
Ocena
5
P
PrintablesMr. Freeman

Emax Aeris 915 MHz TX Micro

Це приблизна модель модуля передавача Emax Aeris 915 МГц. Це допоможе зрозуміти приблизні розміри і на їх основі змоделювати аксесуари для спільної роботи з цим модулем.

Pobrania
243
Polubienia
7
Ocena
5
P
Printablesyoyothechicken

Pokeball Cherish Ball

A Cherish Ball, based on my original pokeball model. This model is listed as a remix because due to the new ring geometry and alignment pin locations, these lid and ring parts are not compatible with the originals. Misc. Info: The…

Pobrania
235
Polubienia
47
Ocena
5
P
PrintablesFy@TOWILab

Peristall-Wasserpumpe

Was man zum Zusammenbauen benötigt: Silikonschlauch (2mm innen und 4mm außen minimal 10cm) 4x Schrauben m3x20 3x Schrauben m2x12 3x Kugellager (11x4x4) Nema 17 Schrittmotor Kabelbinder gedruckten Teile Zusammenbau: Das Teil namens “Main”…

Pobrania
230
Polubienia
24
Ocena
0
P
PrintablesFabmaszter

The Gallerist Organizer (incl. expansions)

This is an insert for the boardgame The Gallerist and based on the great design by tvkili! I used most of his base measurements and adapted the boxes to fit everything including the KS expansion stuff. The boxes also fit into the wells so…

Pobrania
212
Polubienia
29
Ocena
3,5
P
PrintablesRich Thompson

3DVeristan Face Shield - Midsouth Makers Focus Version

This is the 3DVeristan Face Shield that Midsouth Makers is printing for local medical professionals. If a later version arrives we will update this repository after validating. If you are not working with Midsouth Makers, please don't…

Pobrania
211
Polubienia
0
Ocena
5
P
PrintablesMartin

Kids periscope

0,2 mm, no supports, 3 perimeters for more rigidity. Don't forget to mirror STLs for opposite handle before print. Remove built-in supports from body_L and body_R. You need 2 pcs of mirror: 50x50 mm thickness 3 mm. For example:…

Pobrania
209
Polubienia
115
Ocena
5

Presonus ERIS E5 Studio Monitor Stand

Hi! I've edited the original model to fit a bigger E5 version of Presonus speakers. There is also a smaller version if you want to. 0.20 Layer, 20% Infill, No supports, no brim,

Pobrania
197
Polubienia
16
Ocena
0
P
PrintablesMathew Lee

Gridfinity stackable base/lid combo (parameterisable)

Tested with PLA/PETG 0.4mm nozzle - use whatever works for your gridfinity prints. I've included a small range of sizes, anything else, open up the f3d file and edit the parameters nx and ny to change the grid.

Pobrania
189
Polubienia
22
Ocena
0
P
PrintablesLapjoint

"Feverish" Hook Boomerang

Hook shaped boomerang with a certain Boomerang Fever vibe. Flies a nice big circle. The first one I made so far felt a little heavy and required a pretty hard throw, so I added a widened version. There is a considerable difference between…

Pobrania
177
Polubienia
7
Ocena
5

Peristaltic Pump mount

A din rail mount for a Peristaltic Pump. The pump we used: https://a.co/d/fWMLnrs You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…

Pobrania
164
Polubienia
25
Ocena
5

Periscope

Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…

Pobrania
161
Polubienia
28
Ocena
0
P
Printablesmadeinoz

Small Parts Box - Parameterised (f360)

This is a parameterised (Fusion 360) small parts organisation box that can be customised to your needs and is based on the Assortment System Box by @chappel https://www.thingiverse.com/thing:4160638 I needed a flexible design that would…

Pobrania
161
Polubienia
46
Ocena
3

R2D2 Periscope Lift System

Retro Realistic Hobbies YouTube Channel https://www.youtube.com/@retrorealistichobbies I have been looking for a R2D2 Periscope lifting system that works for a while now and could never get any of the ones I have found to work correctly.…

Pobrania
160
Polubienia
20
Ocena
0
P
PrintablesMSBstudios

WaveRise pen organizer

the WaveRise pen organizer is a basic to print sturdy organizer featuring two smaller compartments for pens, pencils and markers, with the larger compartment perfect for larger items such as scissors, calculator, and pretty much…

Pobrania
156
Polubienia
29
Ocena
0
P
Printables3DWP

Goddess Taweret (Thoueris) Sculpture

This is a 3D scan of a Tawaret sculpture, I used plane cut for a flat base and oriented it upright. It's from the Harvard Museum of the Ancient Near East, more info: Faience Egypt (Thebes, tomb 34). Late Period, c. 664 - 332 BC Purchased…

Pobrania
156
Polubienia
39
Ocena
5
P
PrintablesMichel

Nema 17 Peristaltic Pump-608 Bearings-cooling water-engine oil-water

Parts: printed parts (see .stl) 5x 608 bearing hose silicon hose Ø6/4mm | length: min. 1m recommended fixing elements 3x cylinder screw M4x25 2x cylinder screw M4x15 5x hexagon nut M4 4x M3x10 Printing: Material PLA Infill 25% infill…

Pobrania
153
Polubienia
17
Ocena
4
P
PrintablesMscottie

The Gallerist (Kickstarter Bundle) insert

NOTE: You will need a printer that can print at least 221mm in the X or Y direction to successfully make this insert. 2025-04-24 Update Another minor tweak, this time to player_box_x4.3mf / .stl , to make the pawn and meeple slots…

Pobrania
141
Polubienia
28
Ocena
5
P
PrintablesVinc01

Remote control protection box for "Verisure"

Which “Verisure” alarm remote control user has not made a mistake with their remote control? the original box having buttons that are too flush with the box, it often happens that when storing the remote control in a bag, for example, a…

Pobrania
141
Polubienia
5
Ocena
0
P
Printablesstraiki

PreSonus Eris 3.5 speaker stand

This 3D model is a custom-designed stand for the PreSonus Eris 3.5 speaker. It features an elevated structure that raises the speaker off the table, angling it for optimal sound projection and listener ergonomics. The stand also provides…

Pobrania
138
Polubienia
18
Ocena
0
P
PrintablesFloatingBoater

Wheelchair / Walker ramps for carpet doorway threshold (parameterised)

Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…

Pobrania
134
Polubienia
42
Ocena
0
P
Printablessh

Simple periscope for kids and other usage.

Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…

Pobrania
134
Polubienia
30
Ocena
0
P
PrintablesDalama

Laboratory Peristaltic Pump

This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…

Pobrania
125
Polubienia
39
Ocena
0
P
PrintablesKisssys

Peristaltic pump

This peristaltic pump has been made as small as possible to inject small quatities of test solution on command. It has been tested with this tubing.…

Pobrania
119
Polubienia
35
Ocena
0
P
PrintablesKiven

Parametric Peristaltic Pump With Mount

It prints as a single piece. The only non-printed part is the tubing. can be driven with a standard nut driver bit or a ¼ hex key this is a remix of this Parametric Peristaltic Pump which is a remix of this Gear Bearing

Pobrania
118
Polubienia
13
Ocena
5
P
PrintablesParker

DC Peristaltic Pump

I made this peristaltic pump to test water cooled parts, it uses 11, M3 screws, 3 small bearings, silicon tube, 1 DC motor and 3d printed parts. It can pump about 22 mL of water per second with a 4S battery. Motor (I used 12V 550rpm) -…

Pobrania
118
Polubienia
14
Ocena
0
P
PrintablesMalcolm

Peristaltic Pump - Variable Speed - Toggle on/off - Arduino & Easy Stepper

Developed for my PhD work. This is a peristaltic pump driven by a Nema-17 or alike motor using an Arduino (nano or alike) and EasyDriver. Files for the wiring layout and Arduino code are included. There is also a table that contains the…

Pobrania
115
Polubienia
23
Ocena
0
P
Printableshbfs

Laowa 24 Probe lens Periscope

Laowa 24 Probe lens Periscope, Gcode with support and some reinforcement case. Close the Periscope with a 20mm long and 3mm screw, heat an insert at the opposit side. Edit, V2 with better design and adjusted the mirror surface.

Pobrania
113
Polubienia
9
Ocena
0
P

Peristaltic Pump

This is a peristaltic pump designed around 4/6 mm silicone tubing and driven by a JK42HS48-1204 stepper motor. I printed the parts in PLA for testing — works fine so far, but long-term durability hasn’t been checked yet. BOM The model…

Pobrania
112
Polubienia
14
Ocena
0
P
PrintablesJohn Phillips

Raz's Desk Organizer - Shelf Remix - Fully Parameterised

A remix of the shelf for the excellent Raz's Desk Organizer design. I printed the original design, but I could not assemble it as the overhangs did not print properly, and there is no orientation which would avoid problematic…

Pobrania
111
Polubienia
25
Ocena
4

PreSonus Eris E3.5 wedge base

Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 147mm deep, with a 40mm incline in the front and a small lip in the back to prevent the speaker from sliding. Cutouts in the version with holes are 25mm in diameter and…

Pobrania
109
Polubienia
14
Ocena
5
P
PrintablesWHerzog

Peristaltic Pump for NEMA17

This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…

Pobrania
103
Polubienia
18
Ocena
0
P
PrintablesGeorgeRaven

Parameterisable 1U Rackmount System

This parameterisable system is still a work in progress. Print Settings Matrix Part Infill Perimeters Infill Pattern Front Plate 5 2 Insignificant Back Plate 5 2 Insignificant Mount Left* 15 4 3D Honeycomb Mount Right* 15 4 3D Honeycomb…

Pobrania
100
Polubienia
29
Ocena
0
P
Printableskozmickid

Periscope

This was inspired by https://www.thingiverse.com/thing:1027744 This is designed for the mirror shown in the photo and available here: https://www.amazon.com/gp/product/B000RZQI68/ If you don't use this mirror, you may have to use a…

Pobrania
100
Polubienia
12
Ocena
0
P
PrintablesNewMakeIt

Peristaltic Pump

This is a complete re-engineering of the excellent design of Ralf's Perstaltic pump. I printed his pump and built it to his specs, but I found that the small stepper motors would not really run the pump consistently or with enough power.…

Pobrania
97
Polubienia
30
Ocena
0
P
PrintablesEebel

Chopper Advanced Periscope

This updated periscope module for Chopper is required to use the Advanced Head arms.

Pobrania
97
Polubienia
13
Ocena
5
P
Printableskrisztian96

W5 Glass Wipes Holder LIDL (Updated, fits current verison.)

I have fixed it, they have changed it like 3 times since i designed this, why they do this to me? I use this kind of glass cleaners. I did not like the box sitting on my table. It was ugly. So i designed a holder for it. RED one is PETG.…

Pobrania
95
Polubienia
23
Ocena
4,75
P
PrintablesMaxT

Low-Poly Heart for Valentine's Day - perfect gift for your partner, mom, or someone else you cherish in your life

https://www.buymeacoffee.com/maxt ---------------------- 4 versions in one package: Heart with no holes at all Heart including a hole to hang it, or scale it down and use as a pendant Heart including a place for the arrow Bonus: first 2…

Pobrania
93
Polubienia
16
Ocena
5
P
Printablestom

Marking aid for spirit level parameterisable - Markierhilfe für Wasserwaage parametrierbar

For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…

Pobrania
91
Polubienia
35
Ocena
5

Peacemaker Shield FREE verison

FREE version of my Peacemaker Shield models NOTE: free version have lower quality

Pobrania
91
Polubienia
7
Ocena
0
P
Printablesswoollard

PreSonus Eris 3.5 Stand Plate

I printed in PLA+ with 2 walls and 20% cubic infill and it seems plenty strong for these small lightweight speakers. It's also very slightly oversized front to back to allow felt pads in the front.

Pobrania
90
Polubienia
15
Ocena
5
P
PrintablesModal Prints

Peristaltic pump compatible with lego

Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego technic. I've been using it with 6mm silicone aquarium tubing to pump small amounts of citric acid into a baking soda…

Pobrania
90
Polubienia
7
Ocena
5
P
PrintablesMrCliveMrClive

Parameterised Gears (Fusion) V1

This model is my first version of parameterised gears in fusion. Built as part of my parameterisation of my herringbone roller bearing. The model includes both a spur gear and rack. Both can be adjusted to suit any module (tooth size),…

Pobrania
89
Polubienia
4
Ocena
0
P
PrintablesTelles0808

Project AERIS | The Floating Photo Display (No Supports)

The Concept I designed this stand because I wanted a clean way to display photos on my desk without the visual weight of a full frame. The goal was to mimic the look of bent lamination (bentwood), keeping the focus entirely on the image.…

Pobrania
88
Polubienia
45
Ocena
0
P
PrintablesDrakarah

Parameterisable (FreeCAD) Skadis mounts

As I was building my tool wall there were a lot of bits and bobs that didn't have a ready made Skadis model online yet and while there are some OpenSCAD models out there I didn't really like them so I threw together my own and the…

Pobrania
86
Polubienia
6
Ocena
0
P
Printablestacious

Eris 3.5 Stand - 15 Degree

Designed to point speakers at a 15 degree angle. Print 4, 2 per speaker, or 1 per speaker if you live life on the edge. Printed with all walls for a little extra rigidity. Added feet, not necessary, but I was testing out TPU.

Pobrania
81
Polubienia
17
Ocena
5
P
Printablesemertonom

Hunter Douglas Applause LiteRise Blind Handle

A handle for raising and lowering Hunter-Douglas Applause LiteRise blinds. May work for other LiteRise blinds, I guess? I'm only really familiar with this particular set of blinds. This is one of the first models I ever designed, and as…

Pobrania
79
Polubienia
4
Ocena
0

Cherish Ball (Auto-Opening)

This Cherish Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké…

Pobrania
77
Polubienia
22
Ocena
0
P
Printablesjpoles1

NEMA 17 Planetary Peristaltic

This is a remix of the peristaltic planetary gear with lots of improvements baked in. Most notably, this pump mounts directly onto a NEMA 17 stepper motor. It also opens up using a hinge to allow the tubing to be easily loaded into the…

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesBubsBuilds

High Flow, 2 Channel Peristaltic Pump

Full build details here Peristaltic pump with two flow channels, each of which capable of flowing up to 5 liters per minute, although recommended continuous flow rate closer to 2 liters per minute. Initially designed to be used with an…

Pobrania
75
Polubienia
15
Ocena
0

Peristaltic pump (strong)

I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and a hose 8 mm (inner diameter) / 10 mm (outer diameter). I printed the pump from PLA because its elements do not come…

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesGatCode

Peristaltic Pump Controller Mount

This is a simple holder for a 5x7cm prototyping PCB with holes for a potentiometer and a LED. For the pump I used the design of silisand ( https://www.thingiverse.com/thing:1134817 ). The schematics of my circuit can be found in the…

Pobrania
73
Polubienia
26
Ocena
0
P
PrintablesBubsBuilds

Modular Peristaltic Pump Concept Tester

My first attempt at a 'budget' dosing peristaltic pump, mixing some design concepts together from some previous, related designs. You can find more info on the design, and I will be continuing to add related designs, here. One of the main…

Pobrania
71
Polubienia
21
Ocena
0
P
PrintablesBubsBuilds

Manual Peristaltic Pump

I made these pumps primarily to test something else where I wanted to use peristaltic pumps, but needed fine control...I also just was curious how hard it would be to make a printed peristaltic pump :) Turns out, not too bad! I used 3/8"…

Pobrania
70
Polubienia
17
Ocena
0
P
PrintablesMarkHez

Parameterised Over-Door double Coat Hook

A simple double coat hook that clips over the top of a door. Door thickness, space at the top of the door, and offset of the top hook (to stick out past something hung on the bottom hook) are adjustable in Fusion360 Parameters. Default…

Pobrania
68
Polubienia
2
Ocena
0
P
PrintablesBrian42

Cherish Ball

This is a Cherish Ball that I modeled completely in Onshape because I was a bit bored and had the urge to model something. I modeled this in around 2 hours and I think it came out pretty good.

Pobrania
68
Polubienia
3
Ocena
0
P
PrintablesFIB

Gryphon Meat Tenderiser Nose

I liked the Meat Tenderiser designed by Vent357 but I felt it needed a bit more oomph :) So I remade the piece and added the ability to insert a different coloured barrel to make it pop! This is technically a remix (even though I built it…

Pobrania
66
Polubienia
16
Ocena
0
P
Printablesthemakedomaker

Presonus Eris 3.5 Speaker Stand

I designed these for the PreSonus Eris 3.5 Studio Monitors, but they should work for any speaker. I included the Fusion360 file too, in case someone wants to modify for their own usage. Put some foam between the desk and the stand to…

Pobrania
65
Polubienia
5
Ocena
5
P
PrintablesErmonzo

Periscope corner body and mirror cover

Periscope corner body and mirror cover for 50 mm PCV pipe, mirror 74x52

Pobrania
65
Polubienia
8
Ocena
0
P
Printablessamywamy10

Gridfinity Drill Bit Holder 3x1 (2U Height) - Parameterised

This is a Gridfinity drill bit holder which can hold 5 drill bits in a 3x1 (2U height so they can stack) space. The .stl file is set up to hold five bits: 4mm wide x 48.5mm long bit 5mm wide x 60mm long bit 6mm wide x 73.6mm long bit 8mm…

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesHackjaz

Hextraction Mattress Asterisk Tile

Mattress Asterisk — because it’s fun to say! This is a purely aesthetic remix of Zack Freedman’s basic Asterisk Tile — now with an ultra-plush pillow top! Learn more about the free 3D printed board game Hextraction here . Print Settings…

Pobrania
64
Polubienia
10
Ocena
0
P
Printablesbiscuitless

Peristaltic Pump Housing

This is a housing for a pump. I created this so I could move isopropyl alcohol from a container to a filter set-up This contains: 12V Barrel Jack DC Motor Controller Peristatic pump On/off Switch The switch is optional since the motor…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesHappyBlue

Vertical laptop holder parameterised

A simple model to hold 2 laptops and a tablet, I use it to hold the laptops of me and my partner as well as my reMarkable2 in the middle. I have included the original Fusion 360 file so that you can update the widths of the holders to…

Pobrania
61
Polubienia
3
Ocena
0
P
PrintablesJakub Kříž

Asterisk keychain

This isn't just an accessory, it's a statement. A statement that says, 'I'm not afraid to be different, and I might know the combination to the universe.' Support me "If you dig what I'm creating and want to support the journey, consider…

Pobrania
61
Polubienia
6
Ocena
4
P
PrintablesFloatingBoater

Garden solar light fence bracket (parameterised)

Generic solar LED garden lights are supplied with a plastic ground spike and a cylindrical pole which works, but puts then in conflict with lawn mowers and plant shadows. This is a simple openSCAD script with parameters to make it easy to…

Pobrania
60
Polubienia
20
Ocena
5
P
PrintablesCWCDesigns

The Hand of Eris 45 RPM Adapter Version 2

Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Chaos 45 RPM Adapter - https://www.thingiverse.com/thing:2847311 Chaos 45 RPM Adapter Version 2 -…

Pobrania
60
Polubienia
3
Ocena
5

Dual Peristaltic Pump mount with mixing stepper motor din rail mount

A din rail mount for two Peristaltic pumps and a stepper motor to drive a mixing padel. The pump we used: https://a.co/d/fWMLnrs The stepper motor is a standard NEMA 17. You will need to print two tabs for this design. They can be found…

Pobrania
56
Polubienia
12
Ocena
0
P
Printablesflohoff

Peristaltic pump mount

Needed a plate mount for a 12V peristaltic pump. In this case 48mm bore mount distance.

Pobrania
56
Polubienia
4
Ocena
0
P
PrintablesWobblyBonsai157

Left Handed Boomerang - "Feverish Hook" Remix By Lapjoint

Simple Remix for the left handed people out there :)) Sorry for the poor imagery, but there it is. (top one is left for comparison)

Pobrania
55
Polubienia
5
Ocena
0

FHW: DeRista Razor Hand Plane

Hey there tribe, i wanted to make a hand plane so I did. the blade is the DiResta Razor. -edit: sorry the nut was too big on the OD so i made a different one. nut v2. -edit 2: I made a v2 base with handles, figured I should add it. Here…

Pobrania
55
Polubienia
13
Ocena
0

Asterisk Pants Stud button

Either glue retainer pin into button face or use screw with pan head. The asterisk (/ˈæst(ə)rɪsk/ *), from Late Latin asteriscus, from Ancient Greek ἀστερίσκος, asteriskos, "little star", is a typographical symbol. It is used as “wild…

Pobrania
48
Polubienia
2
Ocena
5
P
PrintablesSapuSeven

Low-Poly Eristoff Ginger Wolf Head Shotglass

The Eristoff Ginger came with a beautiful low-poly shotglass in the shape of a wolf head. I really liked the design and decided to model it myself using Blender, so here's my copy as a printable 3d model. Notes: Use a support with…

Pobrania
48
Polubienia
3
Ocena
0

peristaltic pump Mount for the Yosoo 6v Dosing pump from amazon.

I designed this simple mounting system for the Yosoo 6v Dosing pump I got from Amazon .(https://www.amazon.com/gp/product/B00HLCOXFI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) I Printed With PETG and am truly amazed at how strong this…

Pobrania
48
Polubienia
5
Ocena
5
P
PrintablesFumo

Ser-Veresta (黒炉の魔剣) from Anime "The Asterisk War"

I made this model years ago, it's a low poly model of the Sword called Ser-Veresta from the Anime “The Asterisk War”. In the picture i colored it, but i guess if you have an AMS you can also do a multi-color print. I drew some supports on…

Pobrania
47
Polubienia
6
Ocena
0