Wyniki wyszukiwania: fnirsi

Sortowanie

166 modeli

P
PrintablesTokolozi

Fnirsi HS-01 Storage Box

My Fnirsi HS-01 Kit came without a storage box. After briefly looking online, none seemed to fit my complete set including power adapter and several tips. So, I designed my own. This is case can fit: HS-01 Soldering Iron 7 Additional…

Pobrania
688
Polubienia
115
Ocena
4,67
P
PrintablesViktor von Due

Rugged Box for Fnirsi HS-02A Soldering Iron

A Rugged Box with the matching insert for a Fnirsi HS-02A Soldering Iron and all the included accesories. I had to change the shape of the holder for the power supply from the original Makita insert , as mine was different. So you might…

Pobrania
679
Polubienia
85
Ocena
5
P
PrintablesHubczix

Rugged box soldering iron FNIRSI HS-01

Rugged box for soldering iron FNIRSI HS-01 printed in Ender PLA+, Creality Silk PLA, seal printed in TPU/TPE 20D. To assemble it you need 6 screws M2x16 The use of a TPU seal does not provide 100% waterproofness. 3D PRINTING SETTINGS:…

Pobrania
593
Polubienia
122
Ocena
4,73
P
PrintablesTobias Stanzel

Fnirsi HS-02A / HS-02B Stand

Simple stand for the HS-02A/B from Fnirsi. New design but based on this: https://www.printables.com/model/585253-improved-hs-01-stand Like the original, prints without supports. ASA or ABS recommended. I only have a HS-02A, so not tested…

Pobrania
553
Polubienia
86
Ocena
5
P
Printablesmrusse

FNIRSI 2C23T Rugged Case

Rugged case for the FNIRSI 2C23T oscilloscope. Holds both multimeter probes and the one probe it comes with for the oscilloscope (as well as the main unit). Uses six M3x20 screws. No supports needed.

Pobrania
456
Polubienia
176
Ocena
5
P
PrintablesElJefeSpido

FNIRSI FNB58 USB Tester Storage Case

This storage case fits the FNIRSI FNB58 USB multi-meter/tester. The only extra hardware required are four 5x3mm magnets (which measured closer to 5x2.7mm for me). The holes are oversized enough that they will need a dot of superglue to…

Pobrania
368
Polubienia
64
Ocena
5
P
Printablesxvilla
Pobrania
336
Polubienia
30
Ocena
4,8
P
Printableslupos

FNIRSI HS-02A tip holder

Recently purchased a FNIRSI HS-02A and wanted a way to store all 6 included tips in the included carrying case. I'd recommend turning on “avoid crossing perimeters” in your slicer to keep any stringing out of the holes as the tolerance…

Pobrania
300
Polubienia
55
Ocena
5
P
PrintablesFlintyk

Fnirsi HS-02a Soldering Iron Storage Insert for Makita MAKPAC Mini Size 1

Fnirsi HS-02a Soldering Iron Storage Insert for Makita MAKPAC Mini Size 1

Pobrania
263
Polubienia
47
Ocena
5
P
Printablesschreinerman

FNIRSI DPS-150 Power Supply Case

Case for FNIRSI® DPS-150 Programmable Mini Portable DC Power Supply. Buttom and top is clipped with 8x Ø 6mm x 3mm magnets together. The power supply can be used to store DPS-150 and all necessary cables. During operation, the DPS-150 can…

Pobrania
234
Polubienia
54
Ocena
5

Fnirsi SWM-10

Rugged-box modification to store fnirsi spot welder. Added printed clamps on the lid to hold welding cables. Welder fits loosely, so i added fabric cable tape to prevent scratches and dents.

Pobrania
222
Polubienia
35
Ocena
5
P
Printablesticat

Rugged Box - Fnirsi HS-01 Storage Box / Kaiweets KETS02 lid compartment addon

Printer: Prusa MK4S + MMU3 Filament: Prusament PETG Notes: Print-in-place top side down The complete lid can then simply be glued into the upper part of the box.

Pobrania
169
Polubienia
32
Ocena
0
P
Printablesmarcolongol

FNIRSI HS-02A Soldering Iron Mount for Stealth Press 1S

A custom 3D-printable mount/insert designed to securely hold the FNIRSI HS-02A soldering iron on a Stealth Press 1 platform. The mount aligns the iron tip through the mounting bushing so that it is centered for heat-insert pressing…

Pobrania
156
Polubienia
27
Ocena
5
P
PrintablesMarcin

DSO152 FNIRSI oscilloscope box (120x200)

Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…

Pobrania
148
Polubienia
31
Ocena
5
P
PrintablesArno

SKÅDIS mount for Fnirsi DPS-150

This model allows you to mount a Fnirsi DPS-150 to your IKEA SKÅDIS board, using the T-Clip System by @LineArcLine . To create this, I also made use of the Skadis T-Clip negative hole by @capze_178225 . You will need to print two of the…

Pobrania
140
Polubienia
30
Ocena
5
P
PrintablesKuba

FNIRSI HS-01 Soldering Iron Case with Electric Screwdriver

Just a case to carry my soldering iron , electric screwdriver , some hex bits and some tips for the iron that also works as a stand for the soldering iron. Anything with the following dimensions will be able to fix in the screwdriver…

Pobrania
138
Polubienia
25
Ocena
0
P
PrintablesSMACKMAX_

Skadis FNIRSI HS-02 Soldering iron Holder

Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Quick Skadis vs FNIRSI HS-02 Soldering iron holder Use supports

Pobrania
131
Polubienia
21
Ocena
5
P
Printablesraketqueen

FNIRSI LCR-P1 - Tester Case remix from xvilla

This case is a remix from @xvilla_2875915 FNIRSI LCR-P1 Transistor and Capacitor tester parametric rugged case. Nothing special in the print parameters of this design for the remix is the added logo and details of the tester information…

Pobrania
131
Polubienia
14
Ocena
5
P
PrintablesBubble O Bill

FNIRSI 1013D Oscilloscope Cover

Front screen cover for the FNIRSI 1013D Oscilloscope to protect the touch screen while in your backpack or tool bag. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15 Filament: PolyMaker PLA Notes:…

Pobrania
126
Polubienia
12
Ocena
0
P
Printablesseanmurf

FNIRSI oscilloscope case (138-pro)

This case attaches with slightly longer bolts in the rear of the oscilloscope. Keeps all pcb layers, just added to rear and provides side covering. Much easier to use and hold now.

Pobrania
120
Polubienia
5
Ocena
5
P
PrintablesSlegnor

FNIRSI 2C23T Probe Storage

Remix of YasiekPL's Voltometer probes hanger to fit the FNIRSI 2C23T multimeter. Update DEC 2024 : 2nd version with enclosed probe area added. Attach with good double sided adhesive (3M Core etc) Print standing up using tree supports or…

Pobrania
117
Polubienia
21
Ocena
0
P
PrintablesJozio

Box for FNIRSI HS-01

Looking through the models on this site, I found this one. But, alas, I don't have exactly such a power supply and + there is no file to edit, so I decided to recreate the bike. BUT this time I will leave the file so that everyone can…

Pobrania
112
Polubienia
23
Ocena
0
P
PrintablesProtoncek

FNIRSI DSO-TC3 box

A box for DSO-TC3. I used original foam insert, I only added some to the top part, too (1cm thick to protect the top). I have cables stored separately, but i guess that you can squeeze test cables inside, if desired - just put them at the…

Pobrania
111
Polubienia
12
Ocena
0
P
PrintablesWerkRaum

Kaiweets KETS02 / Fnirsi HS−01 Soldering Pen Case (UK Plug)

Case to hold the KETS02 with all accessories. In order to keep it compact, the cap is placed into a space under the pen. The soldering tips have their own holder that can be placed below the USB cable. The soldering tips are released by…

Pobrania
108
Polubienia
10
Ocena
0
P
Printablestrohn_javolta
Pobrania
107
Polubienia
20
Ocena
0
P
Printablesdjc

Multimeter FNIRSI DMT-99 And Lead Holder For Honeycomb Storage Wall

This design to be used with FNIRSI DMT-99 Multimeter. It could be used with other multimeters. Inside diameter for multimeter is roughly 75t x 79w x 28d mm. The lead holder is detachable from the main body by 3 magnets. They are roughly…

Pobrania
98
Polubienia
11
Ocena
0
P
Printablesondrahlavac

Gridfinity tray for FNIRSI DPS-150

Simple gridfinity tray to store your FNIRSI DPS-150 DC power supply. The power supply fits snuggly halfway down in the tray and can be lifted up with no problems. You can store the alligator clips and other accessiories in another box,…

Pobrania
98
Polubienia
13
Ocena
4
P
Printablesdspearl

Rugged Box for Fnirsi HS-02A Soldering Iron (US Power supply remix)

https://www.printables.com/model/258431-rugged-box-parametric

Pobrania
92
Polubienia
23
Ocena
5
P
Printablesseed49

Fnirsi DSO-TC2 or DSO-TC3 Gridfinity 3x3 Box Mini Digital Oscilloscope Transistor tester

Gridfinity box for Fnirsi DSO-TC2/TC3 Mini Digital Oscilloscope 2 Storage for USB-C Cable / 3x test Hook / crocodile clip 1 Storage for BNC adapter Gridfinity 3x3 size

Pobrania
91
Polubienia
16
Ocena
5
P
PrintablesGeorge42rus

Stand Fnirsi HS-01

Print settings: ABS material, 30% infill, 0.5 mm nozzle, 0.1 mm layer height. Additional parts needed: 1 - bearing: 23*8*14 mm; 2 - M3 bolt and nut.

Pobrania
87
Polubienia
35
Ocena
5
P
PrintablesStarcom

FNIRSI Spotwelder stand/holder

I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to look at. The stand provides much more stability for the spotwelder and when you are done you can place the electrodes…

Pobrania
87
Polubienia
19
Ocena
0
P
PrintablesJF53

FNIRSI DSO-152/153 Cover

Simple cover for FNIRSI DSO-152 and DSO-153 (they have the same case just different color). Designed so that the charging port and rear kickstand are completely accessible with the cover on. Since it is a somewhat thin model, I used 100%…

Pobrania
82
Polubienia
16
Ocena
4,67
P
PrintablesLil_Aal

Gridfinity Fnirsi HS-01 tray 5x1x4u

A quick model for gridfinity 5x1 tray of Fnirsi HS-01 soldering Iron. Gridfinity hight is 4u. there are two versions available: with magnets holes (6x2mm) no magnets

Pobrania
82
Polubienia
15
Ocena
5
P
PrintablesDmytro

FNIRSI DPOX180H Oscilloscope Rugged Box

This inserts should be use with Rugged Box Parametric V2 model made by @Whity You will need the original packaging to use it as an oscilloscope holder in the box. Rugged Box Parametric V2 parameters: InnerBoxDepth 185 mm InnerBoxWidth…

Pobrania
78
Polubienia
5
Ocena
5
P
PrintablesMarMed

fNIRSi FNB58 Cover

A cover for the USB Type-A connector for the fNIRSi FNB58

Pobrania
77
Polubienia
14
Ocena
4,5
P
Printablesjesus78976

Fnirsi HS02 Soldering Iron Gridfinity Holder With Magnets. 3x5x5u

Extra space for holding solder, wick etc. I have changed the design a bit from the one in the picture. added a notch for easier removal of the soldering iron, made the tips holder a bit tighter as some of mine were lose. Also removed the…

Pobrania
73
Polubienia
24
Ocena
0
P
PrintablesRainer

Transport case for FNIRSI 2D15P

I designed a simple transport case for a FNIRSI 2D15P mobile multimeter and oscilloscope. I wanted to protect it from scratches when i transport it in my bag. On one of the photos i experimented with a descriptive text on top which i…

Pobrania
73
Polubienia
10
Ocena
0
P
Printables100prudnov

Fnirsi HS-01 soldering iron mount for Stealth Press 1S

Fnirsi HS-01 soldering iron mount for Stealth Press 1S

Pobrania
69
Polubienia
7
Ocena
0
P
PrintablesPaul D

Fnirsi SWM-20 Storage Case

Just a simple case for the Fnirsi SWM-20 Battery Spot Welder. I used the excellent parametric Rugged Box by Whity and adjusted the measurements in Fusion. Then I created an insert to hold the tool and accessories. The Leads and extra tips…

Pobrania
68
Polubienia
11
Ocena
5
P
Printablesredthemesetup

Multiboard FNIRSI DSO-152 Holder

A quick and easy to print mount for your portable oscilloscope needs. Requires 2 of these flatheaded bolts to mount: 9MM small thread T bolt prints in orientation provided in file, no supports, standard multiboard settings.

Pobrania
65
Polubienia
4
Ocena
0
P
PrintablesDadoVodaLAB

FNIRSI HS-02A Soldering Iron Stand – Compact Desk Holder

NIRSI HS-02A Soldering Iron Stand This is a compact desktop stand designed specifically for the FNIRSI HS-02A soldering iron . I designed this model from scratch, taking inspiration from the excellent work by jabdoa_4397802 : Gridfinity…

Pobrania
63
Polubienia
3
Ocena
5
P
Printablesraketqueen

FNIRSI SWM-10 REMIX from Kostyantyn Polischuk

This is a remix design from Kostyantyn Polischuk @KostyantynPol_996395 of the FNIRSI SWM-10 portable spot welding machine rugged case. What I improved on this design is the logo and detailed information of the FNIRSI SWM-10 . (as seen in…

Pobrania
62
Polubienia
14
Ocena
0
P
PrintablesUjang Karnadi

Pine64 Pinecil adapter/spacer for FNIRSI HS-01 /GVDA GD300/T85 solder tip

Why I was doing this? the original pinecil/t100 solder tip is expensive in my country so I was searching for cheaper pinecil tip alternative and found out that a cheap $2 hakko T12 soldering tip is compatible, but I find it too long and…

Pobrania
62
Polubienia
17
Ocena
0
P
Printablesnich

Fnirsi FNB38 USB Tester Shell/Casing

Shell/Casing for the FNIRSI FNB38 USB Tester This tester doesn't come with a shell, and can get uncomfortable to use after a while. There's also the risk of nearby wire or metal getting into the tester and shorting it out, so I designed…

Pobrania
62
Polubienia
8
Ocena
0
P
PrintablesKrzysztofGW

Dremel Workstation - Heat Set Insert Adapter for FNIRSI HS-02

This is a remix. I needed to make it fit with my FNIRSI HS-02A soldering iron with CNC Kitchen C245 Installation Tip Adapter . I can highly recommend this set! :) Made for M3 x 20 and M3 nut. I printed the v8 with PA612-CF and it requires…

Pobrania
61
Polubienia
20
Ocena
5
P
Printablesaxxel39

Rugged box soldering iron FNIRSI HS-01 bottom part.

Slightly redesign bottom part of Rugged Box, created by Hubczix, to fit newer cable (shorter & wider than old one).

Pobrania
61
Polubienia
7
Ocena
0
P
PrintablesGalin Petrov

Holder for FNIRSI 2C53T - stand

Holder for FNIRSI 2C53T - stand FUSION360 and SOLIDWORKS files

Pobrania
60
Polubienia
8
Ocena
5
P
PrintablesMichael Baisch

FNIRSI DMC-100 Holder and Probe Attachment

This is a holder for the FNIRSI DMC-100 digital multimeter, including a convenient way to attach its probes. The probe attachment piece snaps satisfyingly onto both the multimeter and the two probes. Behind the multimeter, there is a bit…

Pobrania
60
Polubienia
12
Ocena
5
P
Printablesmrfixit

Fnirsi 2C53T 3-in-1 case.

This is a case for the Fnirsi 2C53T and 2C23T 3-in-1 multimeter, oscilloscope, signal generator. It will protect it from bumping and hopefully dropping. It allows full access to all ports and the stand can still be opened.

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesGalin Petrov

FNIRSI SWD10 - STAND

FNIRSI SWD10 - STANDFNIRSI SWD10 - STAND

Pobrania
54
Polubienia
12
Ocena
0
P
PrintablesWiseone

Fnirsi 1013D CRO Probes Holder

Probes attached to my portable oscilloscope can get untidy. The problem gets worse when I move my oscilloscope around. The probes dangle and can get caught and break. To help reduce this dangle problem (but not eliminate), I came up with…

Pobrania
51
Polubienia
9
Ocena
5
P
Printablesjabdoa

Gridfinity Soldering Iron Stand for Fnirsi HS-02A

1x3x6 Gridfinity Stand for the Fnirsi HS-02A. If you remove the holder it can be stacked with normal bins. I recommend printing the holder in PETG or something even more temperature resistant. It does not touch the tip but it will still…

Pobrania
50
Polubienia
12
Ocena
5

FNIRSI DPS-150 Rugged box

This is a remix of the popular Rugged Box (Parametric) , specifically adapted for storing and transporting the FNIRSI DPS-150 portable smart power supply. Key Modifications Custom Insert: Features a dedicated tray tailored to the exact…

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesLost_Brain

Skadis Fnirsi HS-01 soldering iron holder

Fnirsi HS-01 soldering iron holder in the same style with https://www.printables.com/model/832429-ikea-skadisskadis-accessories-pack

Pobrania
48
Polubienia
6
Ocena
4
P
PrintablesRossLH

FNIRSi Soldering Iron Accessory Case

2026/04/17 update: Please note that this is for the US model. It will not fit a European power brick. I got a new soldering iron as a gift, and it came with a case for the iron and some tips, but no case for the wall plug, charging cable,…

Pobrania
46
Polubienia
14
Ocena
0
P
PrintablesSebomasteR

Fnirsi hs-02A Heat Insert Holder

Simple holder for heat inserts. For original Fnirsi hs-02A box. Printed in Overture TPU with generic flex settings.

Pobrania
46
Polubienia
14
Ocena
0
P
PrintablesTiMake3D

Transistor-Tester Box für FNIRSi LCR-P1

Aufbewahrungsbox für FNIRSi LCR-P1 mit Zubehör und Anleitung

Pobrania
46
Polubienia
9
Ocena
0
P
Printablesfabse-hack

Fnirsi 1014D Wall Mount

Looking for an elegant and functional solution to securely mount your Fnirsi 1014D oscilloscope on the wall? This custom-designed wall mount offers the perfect combination of stability and aesthetics. Features: Perfect Fit: This mount is…

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesMarcio

Table Stand Fnirsi DMC-100 (Suporte de mesa para amperimetro multimetro Fnirsi DMC-100)

Table Stand Fnirsi DMC-100 (Suporte de mesa para amperimetro multimetro Fnirsi DMC-100)

Pobrania
45
Polubienia
7
Ocena
0
P
PrintablesMellow

Replacement Back Cover / organiser for Fnirsi-1014D

This is a replacement back cover for Fnirsi-1014D, so you can store your oscilloscope accessories with the oscilloscope.

Pobrania
44
Polubienia
14
Ocena
0
P
Printableslas

Multimeter Holder Fnirsi DMT-99 HSW with Multiconnect, Gridfinity

Holder for Fnirsi DMT-99 Multimeter, gridfinity size 2-1-9. Loose fit for the MM. Two slots for multiconnect on the backside to put it up an HSW. I glue my gridfinity feet on after printing the bins, you can also use the holder without…

Pobrania
42
Polubienia
7
Ocena
0
P
PrintablesWilcoK

FNIRSI DSO-TS4 cover / sleeve

The FNIRDSI DSO-TC4 is a multifunctional transistor oscilloscope, to protect its display I created a cover / sleeve. It is a snug fit, the lever of the transistor tester can be used to lock the cover. I printed the cover / sleeve with the…

Pobrania
41
Polubienia
5
Ocena
5
P
PrintablesTrekkie

FNIRSI DPS-150 Usable semi-open hardcase

Seven revisions and two stupid mistakes later... This is a semi-open hardcase for the Fnirsi DPS-150 power supply. The PSU be used in one position, or turned around in order to protect the screen. (I am using a custom glass screen…

Pobrania
40
Polubienia
5
Ocena
0
P
PrintablesHondzik

FNIRSI HS-02 Parkside battery adaptor

Meshup of Parkside battery adaptor and FNIRSI HS-02 stand with added wire cleaner. Check the instructions on original battery adaptor for pin soldering. ( link )

Pobrania
40
Polubienia
13
Ocena
0
P
Printablesfabse-hack

fnirsi 1014d holder version 2

Keep your workspace clean and your Fnirsi 1014D oscilloscope always within reach with this 3D-printed wall mount. Designed for a secure fit and easy access. It combines stability, durability, and a clean look to perfectly complement your…

Pobrania
39
Polubienia
6
Ocena
5
P
PrintablesKaipai

FNIRSI 2C53T HSW Mount

A HSW peg mount I originally designed for my FNRSI 2C53T. This design is parametric. Check out its main page here .

Pobrania
38
Polubienia
7
Ocena
0
P
PrintablesMiaoumi

Fnirsi HS-02A Tip Holder (C245 Tip Holder)

I couldn't find tip holders that actually gripped the tips themselves; the ones I found were either too loose or not what I wanted, so I made my own. I printed it in HS-PETG from Sunlu, but it should work fine in PLA and other materials.…

Pobrania
38
Polubienia
10
Ocena
0
P
Printablescabezacabra

Fnirsi HS-02A Soldering Iron Insert for @ViktorvonDue Rugged Box

This is a new insert for @ViktorvonDue Rugged Box, I made it from 0 based on his base insert model. The power adapter it is different from mine, as mine is a combined us/eu, with different shape, and i wanted more storage inside to store…

Pobrania
38
Polubienia
9
Ocena
0
P
PrintablesALD

Gridfiniy Holder For FNIRSI Spot Welder

A 2X2 Gridfinity holder for FNIRSI SWM-10 Spot Welder. Has room for push-fit magnets.

Pobrania
37
Polubienia
8
Ocena
0
P
PrintablesYeonStar

FNIRSI HS-02 Toolbox Soldering Wire Spool Replacement

This is a replacement reel for the soldering wire spool that comes with the FNIRSI HS-02 Intelligent Soldering Iron kit. If you've lost or damaged the original reel, or simply want a few spares with different wire types, this model is a…

Pobrania
37
Polubienia
6
Ocena
5
P
PrintablesSpinogrizz

FNIRSI S1 Skadis Mount

Allows FNIRSI S1 automatic multi-meter to be mounted on Skadis panels. Print with supports.

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesSirHaXalot

FNIRSI 1013D - Alternative shell

Full shell for FNIRSI 1013D because the original shell is boring infill over 25% recommended, 100& infill will make it feel really sturdy. You will need to find some extra screws, some of the original screws will work.

Pobrania
36
Polubienia
9
Ocena
0
P
Printablesrackjabbit_

Rugged Box for FNIRSI LCR Meter

I bought this transistor, capacitor, inductor (etc) tester from Amazon, and it didn't come with a case, so I made one. I used acrylic paint to color in the letters on the top of the box, and I used some 2mm-thick craft foam from Walmart…

Pobrania
34
Polubienia
7
Ocena
0

DSO152 FNIRSI oscilloscope box Latch Remix

Loved the original model, but the latches were too tall for the box. It looked like others had this issue, as well. Rather than having everyone have to solve this on their own, I just made one for the masses. I shortened them up a little.…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesPablo Fernandez

FNIRSI-1014D Osciloscope French Cleat Holder

This model is pretty big. The french cleat part is a separate body that needs to be screwed into the main body, so it's at least two parts. But since those parts are very long, I included both versions, one being a single body, and one…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesKrzysztofGW

PSU Holder for FNIRSI SAG-55 Hot Air Gun

PSU Holder to keep it in one place.

Pobrania
32
Polubienia
6
Ocena
0
P
PrintablesSkramstad

Dremel 220 - Fnirsi HS-02 mount

Remix to fit Fnirsi HS-02 soldering iron. Use M3 heat inserts. STEP files included.

Pobrania
32
Polubienia
15
Ocena
0
P
PrintablesIntrusionist

FNIRSI Multimeter Gridfinity

FNIRSI Multimeter Holder Gridfinity link : https://amzn.to/4sNFVOW

Pobrania
31
Polubienia
10
Ocena
4
P
PrintablesKonisuaw

HSW Fnirsi LCR-P1 holder

Another HSW storage stuff

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesHugo

Gridfinity FNIRSI HS-01 and cable 6x1x4u

Gridfinity trays for FNIRSI HS-01 soldering iron and cable. For the tips holder, I used this model: Gridfinity KETS02/HS-01 Soldering Iron Tips Holder

Pobrania
29
Polubienia
9
Ocena
0
P
PrintablesFCUK

Fnirsi GC-03 radiation detector storage box

Fits tight, Print in place, Uses 3x5mm magnets. https://www.fnirsi.com/products/gc-03

Pobrania
29
Polubienia
5
Ocena
5
P
Printablestoaster

FRAKS Mount for FNIRSI HS-02a

Simple snap-in mount for HS-02A. Might need a little bit of scaling +/- a few % depending on your printer. I'll make a more permanently retained variant if this winds up being problematic / I have more time.

Pobrania
27
Polubienia
2
Ocena
4
P
Printablesmasterfu

FNIRSI HS-02A Power Adapter Box

FNIRSI HS-02A Power Adapter Box

Pobrania
26
Polubienia
4
Ocena
5
P
PrintablesGoss42

FNIRSI soldering iron IKEA pegboard

This is soldering iron tray that can be hanged on IKEA pegboard. It required pegboard clip and threaded inserts M3. Tray is printed in PLA+ 0.2mm, no support. Clip needs support, print it so the holes are in horizontal orientation.

Pobrania
25
Polubienia
9
Ocena
0
P
PrintablesImpossible

FNIRSI FNB58 Shield

Previously I have damaged the screen on USB testers so I have created the following print that covers one half of the device. You are welcome to remix this item to fit your needs but please refer back to the source document. I have…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesMikeF

FNIRSI Test Probe shield

Test probe shield for the FNIRSI 2C53T DMM test leads. The probe it is very long and sharp, but if you are probing near other terminals, this cover will reduce the risk of shorting to something nearby. I used tree supports for the inside.

Pobrania
23
Polubienia
5
Ocena
0
P
Printablesjandras

FNIRSI HS-01 Tool Holder

Fnirsi HS-01 Tool holder

Pobrania
21
Polubienia
4
Ocena
0
P
Printablesc3dmax

Fnirsi HS-01 Storage Box Gridfinity

Converted Fnirsi HS-01 Storage Box by Tokolozi into a Gridfinity Container. Size is 3x5x6 or 3x5x7. Depending on whether you need a stacking lip.

Pobrania
20
Polubienia
5
Ocena
0
P
PrintablesThefirstmojo

FNIRSI Tollbox for 2D15P

Little Box on the Back of the 2D15P to Hold all Cables and Probes. two Scrows M4x6 or M4x10 are needed

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesTheParrotGuy

Carrying Case for the Fnirsi DPS-150 PD Power Supply

A case for the Fnirsi DPS-150 PD power supply. With cable management. There are two versions of top cover—1 material or 2 material, where you can use TPU to make a soft cushion to avoid scratching the display screen. Instructions for…

Pobrania
19
Polubienia
8
Ocena
5
P
Printablesxsytes

TPU Dust cap for FNIRSI DST-210 / DST-201 top connectors

A simple dust cap to cover the oscilloscope and signal generator connectors on FNIRSI DST-210 / DST-201 multimeters Protrudes slightly on the end, so you can easily grab it. Fits snugly enough to not fall out, but still easy to remove

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesDREnd59

FNIRSI DWS 200

rangement pour les pannes du DWS 200 de FNIRSI

Pobrania
15
Polubienia
1
Ocena
5
P
Printablesramellose

DSO-152 FNIRSI oscilloscope Skadis mount

Skadis mount for FNIRSI handheld oscilloscope. All buttons and ports are accessible so the oscilloscope does not need to be removed for use. However, the tolerances are quite large so the oscilloscope can be easily removed if needed.…

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesramellose

FNIRSI LCR-P1 transistor tester Skadis holder

Skadis holder for the FNIRSI LCR-P1 transistor tester. The device is press-fit into the holder but should be fairly easy to remove. The pegs fit a bit loosely, making it easy to grab the device from the board without having to remove it…

Pobrania
15
Polubienia
0
Ocena
0
P
Printablesfrostbit

Fnirsi HS-01 grip

Use TPU with fuzzy skin enabled in slicer (external wall only)

Pobrania
14
Polubienia
5
Ocena
0
P
PrintablesMGKitty

Soldering Iron Stand for FNIRSI HS-02

I liked the design of the HS-01 stand from Tobias so I used the design for this model. This model is adapted for the HS-02. It includes: Cap storage Iron storage Tip Storage Cleaning area Iron holder Rubber feet depressions Print…

Pobrania
14
Polubienia
7
Ocena
0
P
PrintablesJames Kirk

Fnirsi HS-01 wall mount

A wall mount for the Fnirsi HS-01 soldering iron, with a small spool for solder. The spool consists of two pieces which have to be glued together. The wall mount can be mounted with counter sunk screws or double sided adhesive tape.

Pobrania
13
Polubienia
2
Ocena
0

Fnirsi DPO350P Protection Corners

There are two versions: hard surfaced with some slots to the silicone pads (dampers) 8mm (diameter) x 2mm (height), (_pads postfix). tpu rubber version without silicone pad slots, because the whole corner will work as damper, (_rubber…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesTrekkie

Fnirsi Geiger GC-01 Hardcase

Literally just 5 minutes thrown together in Fusion360 😅, to replace storing the Geiger meter in it's slightly bulkier original packaging. Fairly thick sides to keep the device safe. Also inflated 1 mm in the screen-direction to fit a…

Pobrania
12
Polubienia
1
Ocena
0