Wyniki wyszukiwania: levelling

Sortowanie

123 modeli

P
PrintablesJan

Creality K1/K1 Max/K1C bed levelling risers/shims

UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…

Pobrania
5574
Polubienia
484
Ocena
5
P
Printablessh

🚗🥤 Self-Levelling Cup Holder for car mount.

Info: inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print! I used this ventilation connector shape from print by @icepick Designs (thank you too) I designed car vent…

Pobrania
1965
Polubienia
442
Ocena
4,33
P
Printablesstew675

Permanent Bed Platform Levelling Blocks for the Qidi Plus 4

Summary Designed to fit over the Z-stepper mounting bolts in the base of the print chamber (see photo). The model is a single piece. Print two of them. Discussion When doing a platform calibration, the printer will bring the print bed to…

Pobrania
1436
Polubienia
198
Ocena
4,8
P
Printablesfasteddy

Prusa LACK Enclosure Levelling Feet

Update March 19, 2022: Improved Prusa LACK Enclosure Levelling Feet are now available! I strongly recommend checking out this new version, as it features some improvements that make post-installation level adjustments far easier.…

Pobrania
715
Polubienia
117
Ocena
4,92
P
PrintablesRyan (Rayth)

Bed Levelling and Z-Offset test

Previously I only ever found a test for Z-Offset (100mm square) or bed levelling, 5 squares. Realistically, I see no reason for these to be separate so I made this. It is sized for an ender 3 sized bed (I use a neptune 2) so the corners…

Pobrania
587
Polubienia
20
Ocena
5
P
PrintablesMarvin

Garmin Approach R10 levelling stand

A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.

Pobrania
453
Polubienia
12
Ocena
0
P
PrintablesA_Porcupine

Bed Levelling Test Print (200mm x 200mm)

I put together this quick, single layer test print to test the levelling setup of my Creality Ender 3 v2, with CR Touch. The model consists of a 0.2mm thick pattern, that is designed to be printed as a single layer (with matching layer…

Pobrania
414
Polubienia
19
Ocena
0
P
PrintablesGruenbaer

Anycubic i3 Mega S Bed Levelling Knob

As I tend to forget which direction makes the bed go up or down, I remixed the knob. With this remix the direction is crystal clear. Category: 3D Printer Accessories

Pobrania
403
Polubienia
36
Ocena
4,83
P
PrintablesKyle 🇬🇧

Voron V0 V0.1 V0.2 Bed Levelling Squares

As the cantilever bed can be a bit of a pain to level until you're used to it. These simple, wuick squares can give you a nice visual aid. (As a bonus, nice quick and easy print for free prusameters if you post a make) Squares are placed…

Pobrania
277
Polubienia
40
Ocena
0
P
Printablesjblakey

Ender3 V3 KE Bed Levelling Test

A simple 200x200x0.3mm rectangle used to test the level-ness / Z-offset of your bed. If you're not getting a solid rectangle, you'll need to adjust your Z-offset to be a little more negative (say, from -2.45 to -2.55). If your filament is…

Pobrania
265
Polubienia
28
Ocena
5
P
PrintablesUnderHoodLab

Floor levelling pegs for concrete

Achieve perfectly level floors with these 3D-printable self-leveling floor pegs! Designed for concrete, these pegs help ensure a consistent and accurate surface height. Features: Three sizes included – 3cm, 6cm, and 8cm height options for…

Pobrania
264
Polubienia
25
Ocena
0
P
Printableschiz

Concentric Bed Levelling Pattern

Updated 2023-02-18: Made the lines a twice as wide (0.8mm) for easier removal from the bed. ___________ Another bed levelling pattern for printers with 220x220 print beds, e.g., Ender 3, Kobra Go, etc., with concentric squares and small…

Pobrania
256
Polubienia
12
Ocena
0
P
PrintablesPlunning

PRUSA MINI PINDA Levelling Tool

Make sure you have the correct distance between the bed and the PINDA. Tool to use when adjusting. According to PRUSA KB distance should be between 0.8-1.0 mm. This tool measures 0.9. Follow the official Prusa guidelines and use this…

Pobrania
242
Polubienia
20
Ocena
0
P
Printableskelico

FL sun v400 bed levelling sensor holder

I'm pretty good at “miss placing” things.. so I made this to hold the sensor on the printer…

Pobrania
237
Polubienia
27
Ocena
5
P
Printablessouthbaygsr

Bed Levelling Sign

I designed a simple sign to help remind me which way to turn the knobs during bed levelling. PLA, 0.2mm, Sovol SV01 August 31, 2022: Added an STL file with a line dividing "raise bed" and "lower bed" for more clarity.

Pobrania
235
Polubienia
53
Ocena
5
P
PrintablesSL 17135

Bed Levelling

Archivo para nivelar cama de 300mm

Pobrania
213
Polubienia
6
Ocena
4,67
P
PrintablesRH3D

Semi-automatic bed levelling - Ender 3/Pro/v2 ...

This gcode will do a proper step by step bed calibration with you. You need a 0.2mm feeler gauge or something with the same thickness. The levelling process usually takes few minutes and it includes: Warming up bed to 60°C, homing all…

Pobrania
212
Polubienia
26
Ocena
5
P
PrintablesFunFunBoy

Levelling Knob for K1 Max

This knob is designed to adjustments easier when do the screw tilt calculate. Each indent represents 5 minutes, and you can feel the prominent indicator for a full turn. BOM 4 pcs of Silicone spacer for bed leveling (18mm diameter / 4mm…

Pobrania
206
Polubienia
30
Ocena
5
P
Printablesjeepers01

Adjustable Feet for Dremel Workstation 220 Levelling

Adjustable Feet for Dremel Workstation 220 Levelling Keeps the workstation in position and level on the workbench. I designed these feet to allow levelling up of the workstation when fitting inserts to printed parts which need to be…

Pobrania
203
Polubienia
71
Ocena
5
P
PrintablesBig E

Kingroon KP3S Pro Levelling Thumb Wheel & Locking Clip for the Linear Bearing Upgrade

This is a redesign following my thumb wheel clip for the standard KP3S bed carriage here . The thumb wheel used is neccessarily much larger than standard so that the clip can engage. The wheel was developed from the Fusion 360 file kindly…

Pobrania
197
Polubienia
46
Ocena
4
P
Printablestr1st4n

Ender 3 V3 SE/KE washers (for bed levelling)

Washers/shims for Ender 3 V3 SE/KE printers to help with bed levelling. The factory bed levelling of my Ender 3 V3 SE printer combined with the Auto Z-Offset levelling was not good enough for my liking, so I followed some tips/guides…

Pobrania
193
Polubienia
22
Ocena
5
P
PrintablesDanoke1987

Fast Test Bed Levelling

Bed levelling is needed if your bed has been not right. Can affect the print quality and performance.

Pobrania
192
Polubienia
9
Ocena
0
P
PrintablesOggie

Caravan Levelling Blocks

Some caravan sites are not level and may be beyond the range of travel of the corner steadies. Rather than carry a number of heavy wood blocks to stick under the corner steady, why not have some light weight, stackable blocks. This design…

Pobrania
187
Polubienia
19
Ocena
0
P
Printablesfasteddy

Improved Prusa LACK Enclosure Levelling Feet

This is an updated version of my Prusa LACK Enclosure Levelling Feet . Like the original version, these feet can be used to level your enclosure on uneven floors, and - optionally - anchor the enclosure in place. This updated version has…

Pobrania
185
Polubienia
45
Ocena
5
P
PrintablesBatman3D

Bed levelling spacers

A selection of spacers that can be used to straighten out warped beds. I needed these for my Kobra Max 400x400 bed. I printed them in Yellow PLA (cos they remind me of PacMan)

Pobrania
184
Polubienia
24
Ocena
5
P
PrintablesGiwi

Goosky RS4 Swash Plate Levelling Tool

Helps you to level the swash plate on the goosky rs4 heli

Pobrania
180
Polubienia
10
Ocena
5
P
PrintablesFuzzyLotus

190mm Bed Levelling Calibration Test for 0.6 mm nozzles

Couldn't find many models for this so I decided to whip out my crazy design skills. The print is 190x190. I print this with 0.3mm layer height and set initial layer height at 0.4 Cheers

Pobrania
177
Polubienia
6
Ocena
0
P
PrintablesBoris Š

Bed levelling procedure for Prusa Core One

This is missing part of Prusa documentation about improving bed levelling on Prusa Core One. It's not necessary at all because of perfect first layer feature, but you can improve your feelings about print results if bed level deviation is…

Pobrania
169
Polubienia
61
Ocena
5
P
Printablesavolkov

KP3S bed levelling pattern

I updated my old test patten to work with to work on KP3s-sized bed. Use gcode file to run it straight on kp3s 3.0 original firmware.

Pobrania
167
Polubienia
16
Ocena
0
P
PrintablesBig E

KP3S Pro Bed Levelling Thumb Wheel Clip

Update This design is for the original KP3S pro with the pulley wheel drive for the Y axis. I have another design for the new bed carriage which comes with the Y axis linear bearing upgrade which you can find here The thumb wheel…

Pobrania
166
Polubienia
31
Ocena
0
P
PrintablesZARIBO

ZARIBO LEVEL CUBE QUAD GANTRY LEVELLING PRINTER

Zaribo Level Cube is a standalone Quad Gantry Levelling 3D Printer. It runs with Marlin 2.0 or Klipper firmware. Klipper Raspberry image has also been provided so you can download and flash the pre-compiled firmware for your Raspberry.…

Pobrania
165
Polubienia
39
Ocena
5
P
PrintablesFab Lab León

Laser cutter levelling clamp

Anyone who has operated a laser cutter knows that the surface to be cut needs to be as flat as possible. This simple clamp helps you to level the sheets of wood, acrylic, etc when laser cutting. The shaft is 5 mm and 6 mm in diameter. You…

Pobrania
162
Polubienia
26
Ocena
5
P
PrintablesshakeNbake08

Auto Levelling Beer Holder

Every tired of trying to balance your drinks can on the grass or other uneven surface? Now your drink can always stay level on every surface Printed in PLA at 0.2 layer height To Assemble: Gently squeeze each ring in turn to slightly…

Pobrania
157
Polubienia
47
Ocena
0
P
PrintablesZultax

X axis levelling blocks (100mm)

100mm levelling blocks for levelling your x axis compatable with many 3D printers 0.2 LH

Pobrania
155
Polubienia
6
Ocena
4
P
Printablesvoiyt

Simple Bed Levelling STL for Ender 3 Pro / Voxelab Aquila (220mm x 220mm)

Simple Bed Levelling STL for Ender 3 Pro / Voxelab Aquila (220mm x 220mm) The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:…

Pobrania
148
Polubienia
4
Ocena
0
P
Printablesdzxxx2331s

SIMPLE Tiny M3 Bed Levelling Knob

No supports. Tiny. No collisions. Glue may be needed as M3 nuts have ~0.3mm variance depending on manufacturer.

Pobrania
144
Polubienia
9
Ocena
5
P
PrintablesLilMikey

Triple Z Bed Levelling for Cube-Style Printers

With two steppers on the same driver you constantly have to worry about the steppers falling out of sync when unpowered. If you link them then things get a little better but you're in a big mess if you do skip a step or pull over a cable…

Pobrania
142
Polubienia
23
Ocena
5
P
PrintablesJoão Hackbart

FLSUN Q5 - Bed Levelling Test

Simple shape made of concentric circles, with a width of 0.4mm and a height of 0.2mm. If printed with these settings, it will print single layer circles. Which makes it easier to spot regions where you might have a warped bed.

Pobrania
138
Polubienia
9
Ocena
0
P
PrintablesZakoplex

Tiny Whoop 65mm Levelling calibration stand with room to leave the usb plugged in on the table.

Tiny Whoop 65mm Levelling calibration stand with room to leave the usb plugged in on the table.

Pobrania
134
Polubienia
16
Ocena
5

Easy printed bed levelling knob with M4 nyloc nut for Ender (and more)

Issues levelling your Creality printer bed? Does it change over time? Did you get the yellow springs to fix it? Did it help, but not completely? This is for you. This is a replacement knob for the bed levelling knobs on Creality Ender 5…

Pobrania
130
Polubienia
10
Ocena
5
P
Printablesajhawar

Self-Levelling Palm Tamper

This is a self-levelling tamper. Ensures your tamp is level every time for more consistent, higher quality shots, reduces channelling, and the palm tamp design ensures superior ergonomics, lowers chances of wrist injury and allows you to…

Pobrania
129
Polubienia
25
Ocena
5
P
Printables3dPrinterBro

Statue of God - Solo Levelling

Initial beast in Solo Levelling

Pobrania
125
Polubienia
19
Ocena
0
P
PrintablesLando

Ender3/Ender3 Pro bed levelling column / bed springs replacement

These bed-leveling columns are designed to fit the Ender3 series printers perfectly. They replace your weak or missing springs, as they will provide more support for more accurate bed leveling, automatic or manual. I printed my columns in…

Pobrania
119
Polubienia
15
Ocena
2
P
PrintablesDelian Kanzler

Bed Levelling

Eine Datei zum Bed Levelling

Pobrania
116
Polubienia
2
Ocena
0
P
PrintablesPolygonPusher

PolygonPusher - Laser cutter levelling clamp

Anyone who has operated a laser cutter knows that the surface to be cut needs to be as flat as possible. This simple clamp helps you to level the sheets of wood, acrylic, etc when laser cutting. The shaft is 5 mm in diameter. Instructions…

Pobrania
110
Polubienia
18
Ocena
5
P
Printablesanhaga

Small Bed Levelling Knob

Due to modifications and upgrades on my Ender 3V2, I had to design a smaller bed levelling knob. Dimensions are shown in the attached picture. Print Properties Layer height: 0.2mm Infill: 100% Parameters: 4 Material: PLA/PETG/ABS+

Pobrania
110
Polubienia
10
Ocena
5
P
PrintablesZen Aku

Dummy 13: Knight Killer Dagger | Solo Levelling (No Supports)

The Knight Killer Dagger from Solo Levelling Prints in two parts. Scaled to a standard D13 Model (100%). No supports needed. Glue is optional. Check out my profile for more Dummy 13 weapons and accessories. All my other Dummy 13 models…

Pobrania
102
Polubienia
34
Ocena
0
P
PrintablesDoormat_1

Levelling Discs for Ender 3

Simple 4 by 4 disc set up with 2mm lines between them to test 1st layer squish. The model has a height of 0.2mm so set that as your first layer. Prints in about 20 minutes and allows the user to see what difference changes make as they…

Pobrania
100
Polubienia
4
Ocena
0
P
Printables3D Try Outs

BLTouch Home & Auto Levelling Height Gauge

BLTouch gauge block Help set the 8.3mm height from the nozzle. I believe the newer Smart BL Touch has a 8.5mm distance, from shoulder to tip of probe. Also see: BLTouch Home & Auto Levelling Height Gauge [Custom Height]…

Pobrania
90
Polubienia
2
Ocena
5
P
PrintablesBlutaxt Malta

Ender 3 Levelling Wheel with M3 Lock Nut (Parametric)

This is a levelling wheel with a M3 lock nut cavity at the bottom of the wheel. The idea stemmed after having to re-level the bed countless times due to vibrations caused during printing with the original Creality Ender 3 levelling wheels…

Pobrania
87
Polubienia
5
Ocena
0

Bed Levelling pattern 400 x 400

Bed levelling grid for CR6 Max. The pattern is 400 x 400 mm with various features to ensure the entire bed has been levelled correctly. Print Settings Printer: Creality CR-6 with Mohar.XYZ V4 Rafts: No Supports: No Resolution: 0.4mm…

Pobrania
81
Polubienia
1
Ocena
0
P
Printablescewo

Adjustable Levelling Feet

Adjustable feet to level furniture. Fits a ø30x15 mm hole (CNC or Forstner drill bit). Prints without supports, 0.2 mm layer height, PETG recommended. The shell is glued into the hole. The foot's height can be adjusted with a flat screw…

Pobrania
80
Polubienia
24
Ocena
5
P
PrintablesMike Rainbow

Bed Levelling PETG 0.3 test 12 minutes

There are Many of these but ive customised this one to test at my 99% of the time print settings As I always print in PETG at 0.3 I wanted to make a quick level print test so when ive levelled my dual Z steppers i can see quickly that all…

Pobrania
79
Polubienia
0
Ocena
0
P

Rotary Chuck Arm Levelling Back Support - LaserPecker

Rotary Chuck Arm Levelling Back Support - LaserPecker Fits on arms between arm and “teeth” to provide a supporting backplate so that any larger items sit parallel to the chuck. Short and Long versions included

Pobrania
75
Polubienia
13
Ocena
0
P
PrintablesJohan

KP3S Pro Bed Levelling Thumb Wheel (now with extra grooves)

I really liked the bed levelling thumb wheel with locking clip by Big E , but thought that it could do with a few more grooves for extra resolution when levelling. I also really like the look of the extra grooves. The clip is the same as…

Pobrania
74
Polubienia
15
Ocena
0
P
PrintablesKunal Oojorah

QIDI Q1 PRO Bed Levelling Knob V2

I am not happy with the factory knob and lock nut, thus I have designed this to be able to insert a lock nut during print. There are 60 notches to match 60 minutes. This is V2. Thanks to @Matteo_Fey_3398928 for pointing out that some Z…

Pobrania
69
Polubienia
16
Ocena
5
P
Printablesrobomo

Ender 3 v2 X Gantry fixture for Levelling Dual Z axis

Aligning the gantry by putting some objects between the gantry and the bed causea problems because after the bed tram the gantry is again out of level. So it is better to fix the gantry to the ground qnd leveling or meahing the bed is…

Pobrania
69
Polubienia
11
Ocena
5
P
Printableskiwiprint

Sovol SV06 Top Gantry Shim for Auto-Z Levelling

This is NOT a definitive fix, but for me I was fighting the ABL, I even tried using a timing belt like on my Ender, but it stopped working for some reason (machine spirits I guess) - this could be a good fix for you if you haven't tried…

Pobrania
68
Polubienia
16
Ocena
5
P
PrintablesAndrea

Retraction test stringing calibration - simple bed levelling

Retraction test stringing calibration - simple bed levelling Are you sure your 3d printer is printing well? Try this retraction test and check the result. It will be ready in a few minutes! It's only 60x20x6.8 mm This is a simple…

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesTheParrotGuy

Levelling screw for 40mm aluminium extrusion

A simple levelling screw that can be mounted on a 40mm (or bigger) aluminium extrusion. Personally, I'm using it for a large laser cutter/engraver, but it should be useful for many projects. Print three sets and you are set ;) Now with a…

Pobrania
64
Polubienia
17
Ocena
0
P
PrintablesAG

Ender & Sovol & Extrusion Printer Bed Levelling Reminder V2 4040

I really liked the orginal author's model that created a stand alone reminder of which way to turn the bed levelling knobs. I though it would be a good idea if it could be mounted to the rails, so I had a go at doing my own. Printed with…

Pobrania
64
Polubienia
22
Ocena
5
P
PrintablesLimeLab

Bed levelling knob

A very simple bed knob for any printer using M4 screws. The locknuts prevents the knobs from loosening from vibrations and the much smaller diameter prevents you from accidentally touching them as you handle prints and the machine.…

Pobrania
63
Polubienia
7
Ocena
0
P
PrintablesMa Smi

Prusa MK4 Füße mit Dämpfung und M8 Gewindestifte zum nivellieren ./. Feet with cushioning and M8 grub screws for levelling

Nicht immer hat man die Möglichkeit seine Unterlage,Schrank, Tisch oder Enclosure so auszurichten, das der 3D Drucker Richtig steht. Mit den selbst gedruckten Füssen könnt ihr euren 3D Drucker (MK4) jetzt ausrichten, was vorher nicht…

Pobrania
59
Polubienia
2
Ocena
0
P
PrintablesMrHegger

Levelling Feet

Leveling feet to put under furniture to stand leveled on a bumpy floor. Print instructions Designed in Solidworks with a gap between ball and socket of 0.2 mm (see sketch). No supports needed, after the print the ball needs a few jiggles…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesDarrell Manga

Gantry levelling blocks, Ender series and others

Levelling blocks for ender style printer gantry's i didn't trust the 2 glue stick setup and didn't want to buy 123 blocks just for this so made these, they are basic but work well, the measurements on the top and side are for reference to…

Pobrania
57
Polubienia
2
Ocena
0
P
PrintablesOutspokenPlanet

30mm Bed Levelling Knob for Brass Insert

30mm Bed levelling knob for M3 brass insert Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Amazon Basics PETG Green…

Pobrania
53
Polubienia
4
Ocena
0
P
Printables3dmeister

Bed Levelling Ender 3

Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.

Pobrania
52
Polubienia
1
Ocena
0
P
PrintablesMa Smi

Prusa i3 MK3S+ Füße mit Dämpfung und M8 Gewindestifte zum nivellieren ./. Feet with cushioning and M8 grub screws for levelling

Nicht immer hat man die Möglichkeit seine Unterlage,Schrank, Tisch oder Enclosure so auszurichten, das der 3D Drucker Richtig steht. Mit den selbst gedruckten Füssen könnt ihr euren 3D Drucker (MK3S(+) jetzt ausrichten, was vorher nicht…

Pobrania
50
Polubienia
4
Ocena
0
P
PrintablesRuffle

Lulzbot TAZ 6 X-Axis Levelling Tool

Lulzbot say that one should level the X-Axis by measuring from the top of the axis rods to the top 20mm rails. I've always found this awkward to do and puzzling as the point of reference should surely be the bottom rails of the printer…

Pobrania
49
Polubienia
5
Ocena
5
P
PrintablesTuna209

Simple X-axis levelling tool.

After printing grab a hex key (also, Allen key and Allen wrench) from your kit. Clip a Leveler at each end of your X-axis rods as shown and slide the hex key though the holes and raise or low the Z axis as needed. I start at the one…

Pobrania
45
Polubienia
8
Ocena
4,5
P

Laser Levelling points

I just made something to help me level kitchen Made 3 layers for calibrate. I dont mesured it so its youst layers. Base is 15mm

Pobrania
39
Polubienia
10
Ocena
0
P
PrintablesBlue

Prusa MK4/S and Core One silicone levelling jig

A jig to help cut tubing for the silicone mod for the Prusa MK4/S or Core One Other necessary items: 8x M3x14 screws (counter sunk / DIN 7991) Need one more if you want to replace the middle Torx screw 8x silicone tubing outer diameter…

Pobrania
37
Polubienia
8
Ocena
5

Levelling foot for Hisense tumble dryer

I made this to replace a few lost levelling feet for my Hisense dryer after finding out they're about €10 a piece, which is more than I am willing to pay for a piece of plastic. I made it for the one I have (DHGA8013L), but while…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesGovish

IKEA Kallax Adjustable Levelling Feet Collection

I bought a couple IKEA Kallax organizers for my old apartment, but none of them ended up sitting level. This motivated me to put together a couple designs of adjustable leveling feet, allowing me to stabilize and level all my new…

Pobrania
35
Polubienia
5
Ocena
5

Small Bed Levelling Knob (nut insert)

A simple bed levelling knob with a nut insert to fit my Geetech i3 or any other i3 style printer which uses wingnuts to hold down the bed springs. How I Designed This Designed using sketchup in about 5 minutes Category: 3D Printer Parts

Pobrania
34
Polubienia
1
Ocena
5
P
PrintablesRafe Aldridge

Router Table Levelling Mounts for Temu/Aliexpress etc. Router Table Insert

This is a set of mounts for a Temu/Aliexpress style router table insert, with built in levelling. To use: Use the router to make a hole the same size as the router table insert plate into your tabletop Affix four corner pieces from…

Pobrania
34
Polubienia
5
Ocena
0

Coffee Distributor for Levelling Tamp Base [51mm Dedica Portafitler]

This slightly absurd model is intended for use with my already published Levelling Tamper model for the Dedica Espresso machine. (Linked bellow) The entire thing has been proportioned such that the handle sits flush against the guide when…

Pobrania
34
Polubienia
6
Ocena
0
P
Printablesgexgecko

9-prong WDT espresso tamping and levelling stand 58mm (E61) and 54mm (Breville) sizes

This stand is designed so a bottomless portafilter will rest flat easily on it (with the handle resting on the countertop or table), and have access to a WDT, leveller, and tamp close-by. The WDT ‘holster’ is for the design by jkim_makes…

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesaRGiRob

Anet A8 3 points bed levelling conversion

People talking about 3 points bed leveling convinced me so i designed this to meet my needs. Easy to print, suitable for 3 mm glass equipped beds, no need to drill. 2 m3x8 screws + 5 m3 nuts BOM, Bed support provided in two versions, with…

Pobrania
32
Polubienia
6
Ocena
0
P
PrintablesTBII78

Ender CR10S Pro v2 Bed Levelling Lock

Ender CR10S PRO V2 Bed levelling locks that assist in locking the bed levelling for the CR10, Printed form ABS due to the position in relation to the print bed (dont think PLA would of lasted with proximity to the heat pad or the thermal…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesBen H

Cafelat Levelling Tamper Mod

Noticed that the levelling tamper is super easy to disassemble, so I figured it'd be fun to switch out the POM handle for whatever you wanted. The outer diameter of 57.9 fit pretty much exactly the same as the original handle, but I…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesUeli

POLA G roundhouse add-on: levelling parts

The roundhouse needs a level standing surface. As my surface is not perfect, the doors have jammed on the tracks. Therefore I used these add-on parts to level the building. The corner parts need to be mirrored if required. You can also…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesTwxii

Bed Levelling Knob

Bed levelling knob designed for 11mm outer diameter circular bed nuts. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: .2mm Infill: 10% Category: 3D Printer Parts

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesFujisama

Parametric (FreeCAD) Table Levelling Shim for Laser Cutter

Procedure to create an .svg file with your custom parameters:: 1 - Install FreeCAD (Free and Open-Source) https://www.freecadweb.org 2 - Open LevelingShimTemplate.FCStd 3 - Change the parameters indo the Spreadsheet "Custom Parameters" 4…

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesStrel

Just one more bed levelling model

Layer height 0.2 or less Initial layer height 0.2 or less Set Build plate adhesion to Skirt and set Skirt line count to 5 lines. Model is made for bed 300*300 So downscale width and length if needed. But keep height 100% If you need to…

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesKaladiel

Levelling Feet for M6 Button Head Screws (suitable for SL1)

Simple design for levelling feet. I just used hot glue to fix them on the button head screws and a counter nut to fix the screws against the mounting thread. Intended to be printed in flex material. Print instructions Category: Parts…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesFiskarn

Levelling shim for Creality LD002-R

The build plate on my LD002-R lifts on one side when tightening the screws. The reason is that there is a measurable gap (shown as “gap” in one of the photos) that causes a bend in the build plate bracket. An obvious solution would be to…

Pobrania
22
Polubienia
3
Ocena
5
P
PrintablesMurat

Ultimaker Glass Heated Bed & 3-point Levelling

Compact heating element attachment to tempered glass print bed with 3-point levelling. Wiring instructions as per http://www.headfuzz.co.uk/ultimaker-headed-bed . Print instructions Category: 3D Printer Parts Summary Compact heating…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesMurat

3-point levelling for Ultimaker with magnetic ball bearings V2

Version 2 of 3-point levelling for Ultimaker with magnetic ball bearings. Print instructions Category: Other Summary Version 2 of 3-point levelling for Ultimaker with magnetic ball bearings. Instructions Required parts: 3x 7mm magnetic…

Pobrania
20
Polubienia
3
Ocena
0
P
PrintablesSerVito3D

Spacer for FLSun SR Levelling Probe

Spacer for FLSun SR Levelling Probe This spacer increases the distance between the sensor and the nozzle, ensuring proper leveling in case of hotend changes. I used it to install the high-flow nozzle from the Creality K1. The spacer is…

Pobrania
19
Polubienia
3
Ocena
0
P
Printablesboycabrera

boycabrera - Woodworking Square w/ Levelling Tab (Version 1)

This model is my V1 of my Woodworking Square w/ Push Tab. I have now made a V2 that is ENTIRELY 3d-printed! Just as strong and actually more effective, as I have gone back and made small but significant changes to allow better ease of use…

Pobrania
19
Polubienia
9
Ocena
5
P
PrintablesRanger6

Levelling feet with dampening adapter

The levelling feet can be used with https://www.thingiverse.com/thing:3316671 I have also designed a foot which doesn't have the small holes for the dampeners if you just want them on their own Print Settings Printer Brand: Creality…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesMurat

3-point magnetic levelling for Ultimaker

3-point levelling for Ultimaker with magnetic ball bearing. Print instructions Category: 3D Printer Accessories Summary 3-point levelling for Ultimaker with magnetic ball bearing. Instructions Required parts: 3x 7mm magnetic balls 3x M4…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesZultax

X axis levelling blocks

X Axis levelling blocks to level your X axis by raising it to the top of the frame 0.2 layer height 15% infill print 2, one for each side 4 x m3 x 10mm bolts and t-nuts perfect to ensure a level x gantry before levelling your bed or using…

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesboycabrera

boycabrera - Woodworking Square w/ Levelling Tab (100% 3D-Printed)

This model is an entirely 3D-Printed version of my Woodworking Square . I'll keep it short and sweet… This square rocks. It is affordable, easy to print, literally snaps together, but most importantly it looks and works great. Hardware…

Pobrania
15
Polubienia
9
Ocena
0
P
PrintablesMIsterCat

Skywatcher pillar mount levelling ring

I've used the excellent Eq6r levelling ring for about a year but when I got my Skywatcher pillar mount I was surprised to find it didn't fit. The column is narrower than the tripod so it needed a spacer I made an open collar that fits…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesaeberbach

Protractor for MK3S bed levelling

If you have modded your MK3S print bed so that you can level it by adjusting the screws you might use the “Prusa Levelling Guide” plugin in Octoprint to get information about how your bed needs to be adjusted. I find the most convenient…

Pobrania
15
Polubienia
5
Ocena
0

Coffee Grounds Funnel for Levelling Tamp Base [51mm Dedica Portafilter]

I use a manual grinder for my coffee, which has a rather large grounds cup. This oftentimes results in me either making a mess or having to use a teaspoon to transfer the grounds to the portafilter. Quite annoying! So I designed this huge…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesMrNlCE

Electronic Device for Levelling a print bed

This is a design that I knocked up in Tinkercad after seeing Chucks video. I wasn't going to post this but there seems to be a shortage of the kits. I used some salvaged wires and switch from an old DVD player and an electronic tea light…

Pobrania
14
Polubienia
4
Ocena
0
P
Printableslucan07

Delta Bot J-Head AutoLevelling

Got hold of a Delta style printer so decided to add auto levelling with a simple end stop switch. Works well but will probably look at again in a while and try to improve. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…

Pobrania
14
Polubienia
2
Ocena
0