Wyniki wyszukiwania: lgx

Sortowanie

390 modeli

P
PrintablesTechSoft

Voron LGX and Hartk's Stealthburner PCB Adapter

Parts to assemble the HartK PCB in the Bondtech LGX extruder, and adapted for use on chains. Only you need 4 screws M3x12 and 2 head inserts M3xD5xL4 (Voron Standard) Aliexpress links: Head inserts:…

Pobrania
62
Polubienia
6
Ocena
0
P
Printableshumebeam

Icarus 2 - QIDI X-Max / X-Plus / I-Mate / X-Maker Carriage (Orbiter, Sherpa Mini, LGX Lite)

Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…

Pobrania
2498
Polubienia
226
Ocena
5
P
PrintablesSIVIS

LGX lite Extruder FDM case

I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…

Pobrania
2230
Polubienia
338
Ocena
4,64
P
Printablesgareth.ky

Stealthburner / LGX Lite / EBB 2209 & 2240 - Remix

The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…

Pobrania
1159
Polubienia
133
Ocena
4,5
P
PrintablesDWO

Voron Stealthburner - Ender 3 - LGX Lite - 4020 Fan - BLTouch

This is a modification to the original ender 3 (not v2) to allow for it to mount the Stealthburner fan shroud created by the Voron team. It also comes with a small adapter to be able to mount an LGX Lite as its extruder. With how the…

Pobrania
935
Polubienia
171
Ocena
5
P
Printablesmmuellerphoto

BTT EBB42 Mount - Eva 3.x - Orbiter 2.x & LGX Lite & Sherpa Mini

This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…

Pobrania
906
Polubienia
109
Ocena
5
P
PrintablesEmbrace Making

CR-10 Smart and CR6-SE Direct Drive Upgrade to Bondtech LGX Lite

In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…

Pobrania
803
Polubienia
62
Ocena
5
P
PrintablesEmbrace Making

Creality Ender 7 Direct Drive LGX Lite and Mosquito Magnum

In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…

Pobrania
737
Polubienia
50
Ocena
5
P
PrintablesPierre

Voron 2.4 - Stealthburner with 3DO nozzle cam & LGX lite & BTT SB2209 & umbilical mod

Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…

Pobrania
654
Polubienia
103
Ocena
5
P
PrintablesMLoeko

Voron Stealthburner LGX Lite Mellow SB2040

As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…

Pobrania
624
Polubienia
85
Ocena
4,67
P
PrintablesFractal

BTT EBB42 Toolboard BondTech LGX Lightweight Direct Mount

Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…

Pobrania
584
Polubienia
66
Ocena
4,67
P
PrintablesBrynD

Make-It-Fit Creality K1 LGX Extruder Housing for Bondtech LGX Lite Internals. Threaded Insert version.

Update: 09.06.24. Installation guide added. Update: Also see my new Libra & Trigger Extruders that uses Orbiter internals. By popular request, new threaded insert mounting version. Also see original version here:…

Pobrania
548
Polubienia
127
Ocena
5
P
Printablesjmillerfo

Voron 2.4 LGX Lite Extruder Mod

Overview: This Voron modification to the Stealthburner option supports the Bondtech LGX Lite extruder, ERCF Filament Sensor, and the Hartk 2 Piece Toolhead PCB. I purchased the Bondtech LGX Lite extruder hoping that it would provide a…

Pobrania
511
Polubienia
53
Ocena
0
P
Printables6d6178

Toolhead Spacer for Voron V0.1 with LGX Lite and Umbilical PCB

This is a toolhead spacer with strain relief for the Voron V0.1 that makes the Bondtech LGX Lite extruder mod work together with the Umbilical PCB mod by timmit99 . BOM Qty Description Sourcing 4 M3x6 BHCS Aliexpress 2 M3x30 BHCS…

Pobrania
502
Polubienia
63
Ocena
5
P
Printablestommorox234

LGX lite stealthburner filament cutter

this is a mash up between a few different lgx lite mounts as well as the filametrix toolhead knife to allow for cutting of filament rather than tuning tips. i realised i would need this when tuning pla tips on a high flow hotend like the…

Pobrania
460
Polubienia
92
Ocena
5
P
PrintablesfbeauKmi

PUG holder for CW2 / LGX Lite

Nice feature No need to disassemble the wire harness to install this gland. Bill of Materials Category Qty Description Notes Hardware 3 M3 heat insert Voron BOM Hardware 2 M3x10 SHCS

Pobrania
434
Polubienia
40
Ocena
5
P
PrintablesSIVIS

LGX lite Extruder MJF case

I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…

Pobrania
422
Polubienia
78
Ocena
5
P
Printablesxp1ratex

Umbilical for EBB42 with LGX on Voron stealthburner

Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…

Pobrania
377
Polubienia
53
Ocena
5
P
PrintablesMC

Voron 0.2 mini stealthburner remix for LGX light extruder

Voron 0.2 mini stealthburner cowling for LGX light extruder there are files for the standard strain reliever and for the tool head pcb

Pobrania
375
Polubienia
45
Ocena
5
P
PrintablesBrynD

Make-It-Fit Creality K1 LGX Extruder Housing for Bondtech LGX Lite Internals.

Update: Also see my new Libra & Trigger Extruders that use Orbiter internals. There is now a threaded insert mount version in addition to this one, see link:…

Pobrania
364
Polubienia
87
Ocena
5
P
PrintablesBrynD

Thunder 7, Ender 7 Toolhead (Ender7, LGX Lite, Bambu Lab hotend, CR touch)

Original Bambulab hotend & CR touch z probe version. There is also BIQU Microprobe & E3D Revo CR remix versions now. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic…

Pobrania
359
Polubienia
45
Ocena
5
P
Printablesjphalip

Stealthburner mod for CPAP, LGX Lite and SB2040

This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…

Pobrania
354
Polubienia
74
Ocena
0
P
PrintablesSzwalkiewicz

Bondtech Lgx Lite

This is a solid Model of the Lgx lite extruder. The model comes from the bondtech's websight but I converted the file from .step to .obj to save others some time if they want to to a quick & dirty mock-up for there printer Category: 3D…

Pobrania
336
Polubienia
20
Ocena
5
P
PrintablesMaverick Ng

Voron 2.4r2/Switchwire EBB36 CanBus LGX lite for cable chain remix

Mixing using EBB36 and LGX lite with cable chain hook.

Pobrania
333
Polubienia
34
Ocena
4
P
PrintablesKepleRPL

Back enclosure for Stealthburner with LGX Lite, EBB36 and PG7 umbilical

A mod focused on fitting all hardware of LGX Lite extruder, BTT EBB36 (V1.2) board and umbilical PG7 mount in one fully enclosed and ventilated case. Used parts of toolhead from: - Eytecz's LGX Lite mount - Voron's repo including…

Pobrania
333
Polubienia
45
Ocena
4
P
PrintablesMaverick Ng

Voron Stealthburner LGX lite ERCF EBB36 v1.1 or 1.0 cover

A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30

Pobrania
326
Polubienia
32
Ocena
0
P
PrintablesMaarten Vlug

FLSUN V400 E3D Revo Micro (High Flow) + Bondtech LGX Lite extruder conversion

As I really loved the E3D Revo hotend on my Ender and they recently came with a High Flow version, I decided to make a conversion kit for the V400. I admit, it is not cheap and it does not print much better than a Volcano, but it is very…

Pobrania
321
Polubienia
34
Ocena
5
P
Printables3Dthat

Filament Cutter for LGX Lite and Sherpa Mini

This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it. If you are using the LGX Lite mount…

Pobrania
321
Polubienia
100
Ocena
5
P
Printables6d6178

EVA 3 EBB36 Mount for LGX Lite Extruder

This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…

Pobrania
319
Polubienia
33
Ocena
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Pobrania
312
Polubienia
36
Ocena
0
P
Printableskaragoal

Mellow SB2040 LGX Lite PCB Mount

The original mount did not work for me so I designed this one which works great on mine. The original mod is here: https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 Needs to be printed with supports.

Pobrania
296
Polubienia
28
Ocena
0
P
PrintablesDaniel Hastings

Stealthburner LGX lite mount for SB2209, filament sensor and filametrix.

use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main

Pobrania
274
Polubienia
33
Ocena
0
P
PrintablesEcu3D

Voron SB + LGX Lite + Knomi V2 + SB2209

Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.

Pobrania
273
Polubienia
25
Ocena
5
P
PrintablesTD1 3D

Voron Mellow FLY-SHT42 Holder LGX/Nema17 Canbus Cable holder

FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…

Pobrania
269
Polubienia
36
Ocena
5
P
Printables3dBearnicorn

CR10/Ender3 StealthBurner LGX Mount w/ BL Touch and PINDA

I needed a way to mount the Stealthburner with an original Bondtech LGX to my CR10 S5. I found this Afterburner adapter on thingiverse and remixed it to fit my needs ( https://www.thingiverse.com/thing:4638150 ). The LGX adapter came from…

Pobrania
268
Polubienia
66
Ocena
0
P
PrintablesVC Design

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch)

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…

Pobrania
268
Polubienia
45
Ocena
0
P
PrintablesSputnikOC3D

LGX Lite & WWG2 - Mello Fly SHT-36 Max V3 / EBB36 Style Toolboard Mount - Voron Stealthchanger

Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…

Pobrania
265
Polubienia
28
Ocena
0
P
Printablesbullitt168

Stealthburner LGX lite Mount with SB2209 (RB2040), Filament Sensor + Filametrix

I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…

Pobrania
263
Polubienia
38
Ocena
0
P
PrintablesChris Taylor

Ebb42 eva 3 mount for bondtech lgx extruder

This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…

Pobrania
259
Polubienia
20
Ocena
5
P
Printablesrene hellemons

Bondtech LGX Lite Adapter Flsun V400

i want to have the Bondtech LGX Lite on my V400, so a did a design and make it on my V400 now already is on my Printer and works great i am share it to other people who want the Bondtech LGX Lite on his or hers V400 Printer they are free…

Pobrania
258
Polubienia
45
Ocena
5
P
Printablesboothyboothy

BTT Knomi Display V1 & V2 for LGX Lite Extruder

Update: 13\10\24 I have uploaded a Knomi V2 version. The V2 version is the same for both Generic & EVA3 mounts. 1. Due to the increased diameter of the V2 mount I have modified the EVA3 LGX Lite mount very slightly to accommodate. This…

Pobrania
254
Polubienia
35
Ocena
0

MK3S+ LGX Shortcut Compatible X-Axis Upgrade with Tensioner (Bear-Derived)

Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…

Pobrania
250
Polubienia
53
Ocena
5
P
PrintablesM.Kayed

MAK Vector Duct - LGX Lite V6 Volcano Creality/Ender 3 Mount

The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…

Pobrania
245
Polubienia
42
Ocena
5
P
PrintablesMcGybeer

Kobra Max Direct Drive Mod (Bondtech LGX Lite)

Direct drive mod for the Anycubic Kobra Max using the Bondtech LGX Lite extruder (https://www.bondtech.se/product/lgx-lite-large-gears-extruder/). This mod aims to be as simple as possible, keeping the original hotend case and the…

Pobrania
239
Polubienia
61
Ocena
5
P
PrintablesMax Luck

LGX Lite - Filament Entry Sensor

Simple Sensor that allows you to detect filament entering the LGX-lite extruder. Useful when you are using a tool changer (Specifically the ERCF/ERCFv2 to detect the distance from the changer to the extruder. It is also extremely useful…

Pobrania
239
Polubienia
38
Ocena
4,5

Mellow SHT-36 v3 - LGX Lite mount

Mount for Mellow SHT-36 v3 on Bondtech LGX lite

Pobrania
235
Polubienia
19
Ocena
5
P
PrintablesMichael Whitley

EBB 36 Mount for LGX Lite

Mounts a EBB36 toolboard to the back of a LGX Lite extruder. Use 18mm standoffs to position the mount directly behind the LGX Lite motor. When paired with 18mm standoffs, the mount will not touch the LGX Lite motor. Note: this mount does…

Pobrania
231
Polubienia
27
Ocena
0
P
PrintablesWissencat

Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile

Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile Parts Needed: M12x1,5 Strain Relief 2x M3x25 4x M3x30 2x M3 Inserts Location:

Pobrania
231
Polubienia
35
Ocena
0
P
Printableschrisseebee

Ender 3 Pro/V2 NEO LGX Lite Mount

Update 6/30/23. Added an experimental and untested version meant to be compatible with the Ender 3 V2 Neo. The holes relating to the extruder motor are moved 21mm to the side. Let me know if it works! Update 7/7/22. Added a beefier mount…

Pobrania
215
Polubienia
27
Ocena
4,75
P
PrintablesRoed

Voron Stealthburner with LGX Lite - Door and mount for BTT EBB36

I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked…

Pobrania
215
Polubienia
33
Ocena
0
P
PrintablessdJustin

Voron Stealthburner LGX Lite + EBB_22xx + Knomi

This lets you run a Voron Stealthburner + a Bondtech LGX Lite + a KNOMI + and EBB 2209/2240 I have it up and running on my printer so it's tested, sample size 1.

Pobrania
212
Polubienia
24
Ocena
0
P
Printablesxp1ratex

LGX adapter for VORON MGN12 X-carrige

Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament. Removed the e3d fastener in the bottom, removed the old AB ducts,…

Pobrania
208
Polubienia
23
Ocena
0
P

Bondtech LGX Shortcut Mosquito Fan Duct for Prusa MK3S/+

This STL was supplied to me by Bondtech since it is not available on the site, and the Bondtech SHORTCUT mosquitoExtruder/hotend Accessory Pack has not been available in the US for some reason. Also, the fan shroud is not sold separately…

Pobrania
207
Polubienia
28
Ocena
5
P

LGX Lite + CAN bus + PCB Fan for Stealthburner

If you have an original version of the strain relief, check out the reliability update at the end of the description. It is a quick and easy fix. When this project started, I wanted a CAN bus conversion for my Voron 2.4R2 but did not see…

Pobrania
201
Polubienia
39
Ocena
0
P
PrintablesM.Kayed

MAK Vector Duct - LGX Lite V6 Creality/Ender 3 Mount

The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…

Pobrania
190
Polubienia
28
Ocena
0
P
PrintablesMicael

Mount for toolboard Fly-SHT 42 or EBB 42 on a EVA 3.0 with LGX Lite

Replaces EVA 3.0 Cable Guide with a Fly SHT 42 / EBB 42 mount that also contains a minimalistic cable guide. It can be attached to the EVA 3.0 using the 3 screws same as the original Cable Guide, and for added support (or as an…

Pobrania
186
Polubienia
25
Ocena
0
P
PrintablesNadir @ CN3D

Spartacus LGX

April 2025 we made an update to Spartacus Family and we have moved the LED to the front of the toolhead and we have increased the part cooling ducts. we have bigger vents that flow much better than the previous ones! Later edit: 14…

Pobrania
186
Polubienia
37
Ocena
5
P
PrintablesMike Gin

Voron Mantis toolhead, CPAP, Rapido HF, LGX Lite with ARGB and ADXL

Remix of the Mantis toolhead to keep some of the features I liked from the SB

Pobrania
185
Polubienia
36
Ocena
0
P
Printableswill665123

Stealthburner LGX with EBB42 and filament sensor

This uses mostly hardware that the voron 2.4 uses as well as hardware that the LGX comes with. You will need an additional limit switch, 7mm ball bearing and 3010 blower fan. Some supports needed Print with voron print settings The…

Pobrania
169
Polubienia
26
Ocena
4
P
PrintablesDanny with 3D's

LGX lite MiniSB for Voron v0.2

So you've got an LGX lite and wanna show it, or other cowlings are not your style? Try this one! I remixed the official version for the bowden version of the v0.2, making it suitable to be used with the LGX lite. This model also works for…

Pobrania
166
Polubienia
30
Ocena
5
P
PrintablesMLoeko

voron sb2040 lgx lite hexagon holes cover

modified to fit with lgx lite

Pobrania
164
Polubienia
25
Ocena
5
P
Printableshumebeam

Icarus 2 - QIDI I-Mate / X-Maker / X-Smart Carriage (Orbiter, Sherpa Mini, LGX Lite)

Update October 27, 2022 The latest version is now included in the main Icarus 2 package (zip file on top of the page): https://www.printables.com/model/130789-icarus-2-qidi-x-max-x-plus-i-mate-x-maker-carriage Update July 5, 2022 The…

Pobrania
160
Polubienia
27
Ocena
5
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Creality Spider V3 Pro Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
158
Polubienia
24
Ocena
5
P
PrintablesJordanJ

SB2209/2240 LGX lite mount

I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.

Pobrania
157
Polubienia
8
Ocena
0
P
PrintablesKejar31

EBB36 mounting bracket and strain relief for V0.2 with LGX lite

After buying an EBB36 can-board for my V0.2 tool-head, I re-worked the great design by KayosMaker to fit my personal needs.. Notice the strain relief veers off to the left and rear.. this is to keep the canbus cable from interfering with…

Pobrania
153
Polubienia
25
Ocena
0
P
PrintablesSupercoolbuilds

RatRig LGX Lite Tension Rocker

4 Perimeters 5 Top 3 Bottom layers 40% Infill

Pobrania
144
Polubienia
11
Ocena
5
P
PrintablesKarči Kočnár

Mini Stealthburner 0.2r1 LGX Lite Remix

Improved fanducts from updated MiniStealthburner Model from 0.2r1

Pobrania
144
Polubienia
25
Ocena
5
P
PrintablesEmbrace Making

Creality Ender 3 Max Direct Drive LGX Lite and Mosquito Magnum

In this video we will be upgrading the Creality Ender 3 MAX to make more efficient use of its large build volume. You can easily cut print times in half and this is a massive time saver when making use of the larger build volume. To do…

Pobrania
140
Polubienia
27
Ocena
5
P
PrintablesDaWingla

Voron Mini Stealthburner LGX Lite LDO Straintelief Remix Umbilical Picobilical

I have a Voron 0.2 with an LGX Lite and want to use it with an umbilical from Fystec. So i made an Remix of the brilliant design from LDO. I just added the mounting points for the LGX Lite extruder and and 2 distancepieces. Here shown in…

Pobrania
139
Polubienia
11
Ocena
0
P
PrintablesEvashape

Ultimaker 2 LGX lite Dragon toolhead

Parts required 1x LGX lite 1x Phateus Dragon SF/HF Hotend 1x Heater cartridge 24V ≥30W to suit Dragon 1x 40mm x 4mm OD PTFE tube for between extruder and hotend 4x M2.5x6 CSK screws for Dragon 4x M3x8 CSK screws for LGX 5x M3x35 Cap…

Pobrania
135
Polubienia
18
Ocena
5
P
Printables3DP-MAMSIH

Bondtech LGX lite / Dragon HE ! VORON ZERO

LGX Lite due Dragon hotend on V0 3d printer Bondtech lgx lite is the best extruder i never tested , it's light weight and compact and uses rounded pancake 36 stepper motor. which for me the best extruder can be done on the small printer…

Pobrania
132
Polubienia
31
Ocena
0
P
PrintablesKORSiRO

Bondtech LGX LITE Support FLSUN SR - M3 INSERTS (Guilouz Remix)

Salut les printeurs et printeuses ! J'ai modifié le fichier de Guilouz afin d'adapter le LGX Lite en Direct Drive sur la FLSUN Super Racer. Il s'imprime en une seule pièce et j'ai également modifié les perçages afin d'y ajouter des…

Pobrania
132
Polubienia
9
Ocena
0
P
PrintablesDaWingla

LGX Light LGXL Umbilical Mount for MiniStealthburner Voron V0.2

Adapterplate to Mount an Umbilical/ Picobilical at an Mini Stealthburner with an LGXL. Parts additional needed for mounting: 2x Heatinserts M3 2x m3x6

Pobrania
131
Polubienia
18
Ocena
4
P
Printablesprouting

Bambu A1 hotend FLSUN SR LGX lite direct drive with Effector House

Direct drive for FLSUN SR with the removable Bambu A1 hotend and LGX lite or HGX V2 extruder. Subject to changes! Original 4010 fans can be used Adapters for two 5015 fans Updated adapter for CPAP 3010 Fan for hotend heatsink Insert the…

Pobrania
131
Polubienia
27
Ocena
0
P
PrintablesMikko Taivainen

Voron Mini Stealthburner LGX Lite + PCB Klicky Mod

This modification for the Voron Mini Stealthburner involves replacing the original extruder mechanism with a mount for the Bondtech LGX Lite extruder. Additionally, one of the side cowlings has been adapted to accommodate a Klicky PCB…

Pobrania
125
Polubienia
23
Ocena
4
P
PrintablesEchidnaEnigma

Cable Bridge for Stealthburner / LGX Lite / SB2209/2240

I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…

Pobrania
124
Polubienia
6
Ocena
0
P
PrintablesCrashdown

Stealthburner CW2 LGX Lite Mellow SB2040V3

A mod of the Voron Design Stealthburner and Clockwork 2 extruder designed to suit the Bondtech LGX lite / LGX Lite V2 extruder and Mellow SB2040V3 Canbus board. The Mellow SB2040V3 is quite different to the V2 designs and uses a new…

Pobrania
123
Polubienia
15
Ocena
0
P
PrintablesBnackus

Bontech LGX to E3D V6 adapter Version 2

parts list 1 X lgx v6 adapter Mount v2 1 X lgx v6 adapter Clamp v2 2 X m3 screw 2 X m3 nut 1 X PTFE tube Additional notes parts are pre-oriented and should not need supports parts use "false floors" to ensure holes are consistent when…

Pobrania
121
Polubienia
11
Ocena
5
P
PrintablesTheSwedish

EVA 2.4 for LGX lite on MGN9 linear rail

This is an adaptation of MFBS "Fast-Swap series" to improve weigth while retaining rigidity for MGN9H rails. [20220714] New top mount design featuring integrated slots for endstop. Other compatibilities with original EVA 2.4 remain but…

Pobrania
121
Polubienia
13
Ocena
0
P
Printablesvorby

Ender-7 Mosquito Magnum/LGX Lite Hotend

Ender-7 Mosquito Magnum/LGX Lite Hotend Adapter Finally decided to upgrade my ender-7 stock hotend, the best flow rate i was getting before the flow started degrading was about 14mm^3/s (0.4 nozzle), so the best benchy time i had was just…

Pobrania
121
Polubienia
11
Ocena
0
P
Printablesgepigom2883

Orbital (V1.5 NOT 2.0)/LGX Lite/LGX Pro adapter for Creality K1/K1 Max

MARCH 23TH 2024 UPDATED VERSION Orbiter 1.5 fixed holes Alternative version to use with the Bondtech LGX Lite/Bondtech LGX Lite Pro YOU MUST HAD ROOTED THE K1/K1Max/K1C Rotation distance for Orbiter 1.5: 4.8 Rotation distance for Bondtech…

Pobrania
121
Polubienia
23
Ocena
0
P
Printablesdietmar101

EVA 3.0 LGX Lite EBB 42 toolboard mount

BigTreeTech EBB 42 toolboard mount for Bondtech LGX Lite extruder on a EVA 3.0 system but u can use it also on other toolheads than EVA 3.0. Everything is created for M3 socket head screws and hex nuts.

Pobrania
119
Polubienia
17
Ocena
0
P
PrintablesJamin Collins

BTT EBB42 Mount - Eva 3.x - LGX Lite - remix

Will need: 4x 3mm heat inserts 6x M3 6mm screws 3x M3 8mm screws 2x 20mm standoffs

Pobrania
118
Polubienia
23
Ocena
0

Stealthburner with LGX, EBB42 and filament sensor AH3364Q-P-B for ERCF

I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…

Pobrania
117
Polubienia
16
Ocena
0
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Bambulab A1 Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
116
Polubienia
22
Ocena
0
P
PrintablesSebazzz

Creality CR-10 Smart Bondtech LGX direct drive mount

This model allows you to mount a Bondtech LGX in a direct drive configuration on your Creality CR-10 Smart. This mount allows the strain gauge still to bend and allow leveling. Step file and Fusion 360 archive included. Please adhere to…

Pobrania
114
Polubienia
9
Ocena
0
P
Printablesatom

PG7 Strain Relief Mount for LGX and Clockwork 1

Includes two-piece and open variants so that the cable isn't trapped in the mount. Get the CAN board mount from the original model.

Pobrania
113
Polubienia
16
Ocena
0
P
PrintablesMaker64

Big Tree Tech EBB 36 Mount for LGX Lite / Orbiter 1.5 / 2

EBB 36 Mounts for LGX Lite / Orbiter A raided version for better clearance on the EVA 3 printhead is included. Strain relieved version will be available soon after testing.

Pobrania
112
Polubienia
13
Ocena
5
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Bambulab X1 Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
112
Polubienia
20
Ocena
0
P
Printablesprouting

FLSUN SR with Bambu and LGX Lite Extruder

FLSUN super racer with Bambu hotend and Bondtech LGX Lite extruder Updated Added grille exhaust for best air guide. The grille diverts air away from the bed, especially helping with enclosed prints. Added house fan3010 "David version"…

Pobrania
111
Polubienia
16
Ocena
0
P
PrintablesEsoterical

LGX Lite EBB36/NH36 PUG Mount

A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an LGX Lite extruder. The original PUG download page (for the gland itself) is at…

Pobrania
110
Polubienia
21
Ocena
0
P
Printablesvorby

Ender-7 Hotend v2 Mosquito Magnum/Lgx Lite Extruder

Ender-7 Hotend v2 Mosquito Magnum/Lgx Lite Extruder This version has a more modular design with the mounts for the fans and the adxl345 separated so the can be customized. It also enables better visibility of the hotend nozzle included…

Pobrania
110
Polubienia
9
Ocena
0
P
PrintablesCryd

Stealthburner LGX Cover

Just a little cover for the LGX (not light) Join our discord ;) https://discord.gg/2vEVdejeBZ Category: 3D Printer Parts

Pobrania
108
Polubienia
10
Ocena
5
P
PrintablesDanny with 3D's

Voron V0.1 LGX lite cable strain relief

Have you bought an LGX lite for your printer, or perhaps you changed the extruder and now use a sailfin instead of a sherpa mini? Either way, does your cables looks like they are gonna break the tiny and weak strain relief piece that you…

Pobrania
108
Polubienia
10
Ocena
0
P
PrintablesJordanJ

LGX lite SB PCB mounts

WIP. but should allow you to attach your Stealthburner PCB to the LGX lite. needs refinement but 100% works BOM: 4 M3x12 SHCS 2 M3 heat inserts 4 M3 washers ) 2 per screw to keep gab between LGX gear and PCB holder

Pobrania
108
Polubienia
12
Ocena
5
P
Printables3Ddude

LGX filament sensor V2

in this version you don't need the steel lever instead you can use some parts from the original prusa extruder which are :1- small magnet 2-filament sensor 3- 3mm steel hex nut 4-7mm OD washer (can be printed if you can't sort it )4-push…

Pobrania
106
Polubienia
16
Ocena
5
P
PrintablesEmbraceNext

Voron Revo LGX Lite V0 adapter

This is the adapter block for the Voron Revo LGX Lite echo system. https://www.bondtech.se/product/mini-after-lgx-lite-upgrade-kit-for-voron-v0/ You will need 4 M3x6 button head screws. There is a jig included to cut the PTFE tube to the…

Pobrania
105
Polubienia
31
Ocena
4,5
P
PrintablesEric

EBB36/SHT36 LGX Lite front mount plate with short cable strain relief

This is a remix of MaroonOut09's and KayosMaker's CAN toolhead board mount. It has the same cable strain relief height as KayosMaker's design, but with the mirrored mounting orientation of MaroonOut09's design, so that it can mount to the…

Pobrania
105
Polubienia
10
Ocena
0
P
PrintablesCyberDong

FLSUN SR housing - LGX Lite adapter

I really like TownDrunk's housing for the Super Racer (IMO it's the best one available for the printer - clamping extruder horizontally or using separate adapters for 5015 fans isn't great), but it was only available for the Orbiter or…

Pobrania
104
Polubienia
10
Ocena
5
P

LGX Lite to EBB 36/Picobilical Toolhead Board Adaptor - Voron V0.2

Skeletonized toolhead board adaptor for the LGX Lite. This will fit the EBB 36 and the Picobilical toolhead board. The spacer is 16mm long if you wanted to use metal threaded ones from amazon. I kinda recommend it although you can press…

Pobrania
104
Polubienia
10
Ocena
0