Wyniki wyszukiwania: newer

Sortowanie

89 modeli

P
PrintablesSpekkie3D

1U rackmount for HP Elitedesk G3 mini and newer

This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…

Pobrania
3745
Polubienia
282
Ocena
5
P
PrintablesXXCoder

Pinda Adjustment pad (newer S Pinda, 1.5mm)

It helps you offset pinda and nozzle far easier than paper and ziptie method. Note: It is for newer S Pinda 1.5mm only. For 0.8 older version, you could open freecad file and decrease pad from 1.5mm to 0.8mm, then export stl file. Steps:…

Pobrania
460
Polubienia
31
Ocena
4,86
P
PrintablesEthelder

Fiberflex 40D printing profile. (for MK3S, but might work on newer too)

Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…

Pobrania
418
Polubienia
20
Ocena
5
P
Printablesstrafer

MacBook (Air M2 and newer) and iPad vertical stand.

This model is a remix to fit different MacBook models. MacBook slot is designed to fit all the models with M2 Air form (M2 models and newer), also it has extra space if you use cover case with your Mac. iPad slot fits iPad Pro 11'' with…

Pobrania
390
Polubienia
32
Ocena
4
P
PrintablesSeth

Intel NUC 8 or newer "Slim" SSD extender

This is an Intel NUC 8 or later extender to give "Slim" models an SSD mounting plate. I used M2.5 heat set inserts on the top of the plate to interface with the existing NUC bottom plate, and M3 heat set inserts on the side for the plate…

Pobrania
343
Polubienia
29
Ocena
5
P
PrintablesScoott

Philips Sonicare 4100 Travel Case (for newer smaller models)

This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…

Pobrania
314
Polubienia
40
Ocena
5
P
PrintablesOnemoredave

Bambu Lab AMS light stand (newer version)

A combined AMS riser and light bar in one. This remix is a pretty big departure from the original, completely new gluing sytem and has been adjusted to suit the newer (?) AMS units with the front feet closer together than the rear. My AMS…

Pobrania
291
Polubienia
85
Ocena
5
P
PrintablesRudi

Zipper bag funnel fit on Dyson V10 and newer

I created a funnel to suck the air out of the filament zipper bags. It fits on Dyson V10 or newer vacuum cleaner. The release mechanism is a little bit stiff. I think this will be better than a lax fit. Happy printing ;-) Print…

Pobrania
280
Polubienia
43
Ocena
4,83
P
PrintablesMecky1963

Holder for newer Shelly's

Made a holder for newer Shelly switches. Hope it's useful for you. You can print it with every available filament, except FLEX/TPU. Layer 0.2 mm PLA from DasFilament…

Pobrania
263
Polubienia
13
Ocena
4
P
PrintablesBrandon Herndon

Stern Shooter Lane Protector (newer Stern)

Stern shooter lane protector. Print vertically with "v".s pointed up.

Pobrania
257
Polubienia
9
Ocena
0
P
PrintablesMike D

Chapstick holder for newer Stanley 40oz

This is for the newer(rounder) style handle. Build in PETG. Depending on the brand of chapstick and label thickness, there may be some tearing or catching of the label. *The fit is tight, you will have to turn it 90 degrees and press onto…

Pobrania
243
Polubienia
37
Ocena
0
P
PrintablesGuido

Sunshield TomTom rider (Made for 400, should fit any newer model since form factor isn't changed)

This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!

Pobrania
241
Polubienia
16
Ocena
0
P
Printables05WEL

Makita Battery to Bosch Green Tool adaptor - Newer Bosch batteries

Cordless tool battery adapter. Makita Battery to Bosch Green tools - this emulates the battery pictured Extra hardware 9.5mm male spade terminals (https://www.aliexpress.com/item/4001062653078.html) wire fuse terminals M3 x 25mm bolt bolt…

Pobrania
207
Polubienia
28
Ocena
0
P
Printablestimobp

AMS Wall Mount - HSW (for AMS 03/2024 and newer)

This Version is for AMS ordered (March/2024) and later/newer. With 3 large chambers / slots. If you want to try it first, you can print just a few layers, stop the print and make a fitting test.

Pobrania
186
Polubienia
32
Ocena
5
P
Printablesk1-801

K1 Max Riser corner piece for newer revisions

UPD 27.08.2024: Uploaded a version with a tighter fit. The original is now marked “Clearance”.

Pobrania
176
Polubienia
12
Ocena
0
P
PrintablesKriva3D

1U rackmount for HP Elitedesk G3 mini and newer left blank powerbrick version

Huge thanks to Spekkie3D for providing me with the STEP file. I have remixed he's left blank to be able to mount the powerbrick of the HP Elitedesk. Hopefully it's usefull to someone.

Pobrania
176
Polubienia
19
Ocena
4
P
PrintablesSG Newb Rider

Ikea Alex Handle Economy (inc handle for newer Alexes)

I removed part of the handle from the original to save on material and printing time. Does not affect functionality or cosmetic look of the original. No support needed Old handle no longer fits newer Alexes, had to modify the old handle.…

Pobrania
158
Polubienia
31
Ocena
5
P
PrintablesKen226

DeWalt 20V XR wall mount battery holder, newer version.

This version uses two, vertically oriented screw holes. This will allow you to mount it to wall studs behind drywall. I also added the DeWalt 20v XR text to the sides, and changed the upper gusset reinforcements to allow for the upper…

Pobrania
146
Polubienia
29
Ocena
5

Dyson Nosko adapter (newer Dyson versions)

Adapter for easier usage of Nosko, kid's nasal respirator

Pobrania
142
Polubienia
12
Ocena
5
P
Printablesthisiskeithb

Creality Ender-3 Y-Axis MGN12H Linear Rail Mod (Newer Style)

Note: This is for the newer Ender-3 printers with the U-shaped front Y idler bracket. Here's the mod for the older style with the flat/z-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…

Pobrania
142
Polubienia
33
Ocena
5
P
PrintablesJohn D'oh

JEEP Compass console bin 2022 and newer

Bin for the console, fits other years with the same console as well as the Dodge Hornet.

Pobrania
141
Polubienia
21
Ocena
5
P
Printables3DesignsCH

Bambu Lab Spoolholder Extension for newer Revisions & AMS

Bambu Lab Spoolholder Extension for AMS to use wide spools without removing the tube or cable of the AMS. Its compatible with the new spoolholder revision. Print instructions: 4 perimeters/walls 5 top/bottom layers 40% infil no supports…

Pobrania
140
Polubienia
23
Ocena
4,67
P
PrintablesSlendrick

Fork lift for Duplo excavator (newer style)

Adjustable fork for the newer Duplo excavator arms links. I recommend not printing it too heavy, since the excavator will tip over. I did 5 walls (0.4 width x 0.2 height) 20% infill and it was a little too heavy.

Pobrania
139
Polubienia
23
Ocena
4
P
PrintablesAgainRobot

Dyson adapter narrow suction for newer Dysons eg V10 V11

This is an accessory for newer model Dyson handheld vacuum cleaners. It has a short length and a 13.75 mm OD tip. Before printing verify the connection onto your Dyson model. For example it should include the two guiding rails on the side…

Pobrania
139
Polubienia
8
Ocena
4
P
PrintablesMike

CT90K1 Carb to Air Filter Holder Boot - For Newer 2 Screw Carbs w/32mm Intake Opening

This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw carb with an intake opening of approximately 32mm. This has been printed with TPU which provides enough flexibility to…

Pobrania
125
Polubienia
8
Ocena
0
P
PrintablesQuadView

Ronix Surf Skim Board Fin 2018 and Newer

This was a design for my brother. He goes wake surfing often and due to having a lot of people on the boat and new people learning, the fins get broken often. Being very expensive to replace we decided to try to make them. This is my go…

Pobrania
122
Polubienia
7
Ocena
0
P
Printablesxls38

Photo Keeper Game Caddy FIX for newer 4x6 photo storage containers

This is a negative volume model to use with all the great models for game inserts that were built for older 4x6 photo keeper cases. Easy to apply within the PrusaSlicer and 3D-Builder. As of 2024, all the available photo storage…

Pobrania
120
Polubienia
19
Ocena
0
P
PrintablesRetro Frog

NeoSaveKeepa - Magnetic storage case for your NeoSaveMasta memory card (2016 and newer) for Neo Geo

If you are looking for a safe storage solution for your NeoSaveMasta memory card for your Neo Geo, look no further! The NeoSaveKeepa was specifically designed to securely hold the NSM in place. The NeoSaveKeepa is ONLY compatible with…

Pobrania
112
Polubienia
12
Ocena
0
P
Printablesihlamur

Macbook Apple Silicon Camera Notch Cover (Newer versions)

fits to macbook apple silicon models, newer ones with a tick screen and notch on top, the ones that have M1/M2 model cpus.

Pobrania
110
Polubienia
8
Ocena
0
P
PrintablesSuperleggera

Sapphire Pro E3D V6 mount with BLTouch (newer Pro batches)

Update, I have made a new version with an integrated holder for a bltouch inspired by Humanity_co, if you have already printed out the previous version then you will only need to print out the fan shroud clamp and a small adjustable mount…

Pobrania
97
Polubienia
18
Ocena
0
P
Printablesbobbach

Centauri Carbon runout sensor hinge adjusted for newer Centauri Carbons

Updated it to work on newer Centauri Carbon sensor mount design.

Pobrania
95
Polubienia
9
Ocena
5
P
PrintablesC1RCU1T

Headset Holder (newer version in description)

One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this design to attach to my adjustable Husky table for my…

Pobrania
93
Polubienia
9
Ocena
5
P
PrintablesSean Roach

Newer Propane bottle plug

Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…

Pobrania
93
Polubienia
10
Ocena
0
P
PrintablesDZC

Nozzle for Dyson V8 and Newer Models

Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…

Pobrania
92
Polubienia
8
Ocena
0
P
Printablesfluetke

Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]

IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…

Pobrania
90
Polubienia
9
Ocena
5
P
PrintablesFalling Entropy

Disney Newer Model MagicBand+ Rubber Keychain Holder

This keychain holder is designed to fit the MagicBand+ which is the newer model that works with the sculptures at the Disney theme parks. Attach it to a keyring. For a really convenient option, attach the keyring to one of those…

Pobrania
86
Polubienia
19
Ocena
0
P
PrintablesRogerM

Ring Doorbell 20° Wedge mount for 2025 / Newer Gen models (Pro, Wired gen 2, Plus)

The mount that comes with the doorbell screws into this wedge mount, and you can use the same Ring screws (although maybe they might need trimmed a bit). However, I used the Ring doorbell screws to attach the wedge to the wall, then used…

Pobrania
86
Polubienia
6
Ocena
0
P
PrintablesDavid Shideler

AMS Cardboard Spool Adapter for Polymaker (newer spool design)

This is a simple lightweight spool adapter for Polymaker cardboard spools, specifically the newer kind that has the holes spaced 120 degrees apart. It slots into the holes to provide a bit of a better fit. I've got a few variations…

Pobrania
85
Polubienia
13
Ocena
5
P
PrintablesEric Le

Adjustable Spool Holder for Silica Gel / Spool Weight (Newer Sunlu Spool Adaptor)

Created some adaptors for Sunlu's Newer Filament Spools which have an inner diameter of 62mm.

Pobrania
84
Polubienia
15
Ocena
4,5
P
Printablessjc115

Elegoo Centauri Carbon Riser V2 (mid rise) for newer models with good LED's (w/ sliding top)

Mid Rise top with NO provisions for an LED cable. Split into sections so it can be printed on the CC. I also made the pins slightly larger and tightened up the tolerances so that no gluing is required. STEP files are attached so that you…

Pobrania
80
Polubienia
7
Ocena
0
P
Printableswerkstrom

Minimalistic encloseure for newer Shelly line of products V1.1

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…

Pobrania
80
Polubienia
12
Ocena
0
P
Printablessjc115

Centauri Carbon Riser (low rise) for newer models with good LED's (with or w/o sliding top)

Low Rise top with NO provisions for an LED cable. Split into sections so it can be printed on the CC. STEP files are attached so that you can modify to your liking. Two sets of rear corners. One is ‘closed’ for a stationary top, and the…

Pobrania
79
Polubienia
13
Ocena
5
P
Printablespyrho // 25.wf

Dyson Crevice Tool (for V7 and newer)

A crevice tool for your Dyson. A short (126mm total height) and a long version (216mm total height) are provided. The OnShape model is available to copy & modify over here , it's almost fully parametric using variables so you can edit…

Pobrania
70
Polubienia
7
Ocena
0

EliteDesk 800 G3 Mini (and newer) 10 Inch Rack mount Adapter

I would recommend using PETG since I designed it for needing as little filament as possible. You need to print it twice, because it needs to be mounted on the front and the back of the rack. It's designed for racks with a depth of 200mm,…

Pobrania
65
Polubienia
17
Ocena
0
P
PrintablesNirvash

Lidl Powerfix pegboard tape holder for newer models

At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and the square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made…

Pobrania
64
Polubienia
9
Ocena
0
P
PrintablesMDZ_3D

Compact Travel Case for Philips Norelco Series 7000 & Newer

Hello Everyone, I hope you are all doing well! I am happy to share with you all the complete model assembly of this sleek and compact travel case for your Philips Norelco Series 7000 and newer. This case will allow the user to store the…

Pobrania
63
Polubienia
23
Ocena
0
P
PrintablesC1RCU1T

Headset Holder V2 (newer version in description)

This is the second version of my headset holder. One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this…

Pobrania
59
Polubienia
5
Ocena
5
P
PrintablesGouldshaw

1U Rackmount for HP Elitedesk G3 Mini and Newer Left HDD Mount

Modified the blank to include a 3.5 HDD caddy on the same rail, also incorporated a keystone slot for the HP G3 mini so an ethernet port can be on the front of the rack.

Pobrania
53
Polubienia
9
Ocena
0
P
Printableswildstallion

Newer R3 XL side filament sensor with reduced force (magnetic)

Newer R3 XL side filament sensor with reduced force (magnetic).

Pobrania
52
Polubienia
6
Ocena
5
P
PrintablesKfury

White Crew Box to fit newer editions

This remix adds a tiny cutout to the space for one of the dragon's feet. Some version of Wondrous Creatures have a slightly changed White Dragon that won't fit in the original Crew Box so I made a tiny change so both the old and new…

Pobrania
51
Polubienia
1
Ocena
0
P
Printableswerkstrom

Minimalistic encloseure for newer Shelly line of products

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.

Pobrania
46
Polubienia
7
Ocena
5
P
PrintablesboB

Monorail Beam for Disney Model - 500 mm radius ***older design, use the newer ones***

5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesKnowKontrol

P1P Portal AMS Feet Remix For Newer AMS

The AMS portal Feet did not fit my AMS, so I resized parts to fit. It is an easy fit now. It is loose now, I may update it soon for a tighter fit, but it works perfect.

Pobrania
43
Polubienia
7
Ocena
0
P
PrintablesErkHal

Ikea Ledberg Sockets - newer design

I did this remix because the design for the Ledberg sockets has changed a little bit. The fit is just right with this scale, however the male side leads might require some tinning or bending to make a proper contact with the leads on the…

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesAstrochimp

14-18 silverado phone holder that fits newer phones

tpu is best but anything except pla would be fine for heat resistance pla will melt in the hot cab during summer

Pobrania
38
Polubienia
6
Ocena
0
P
PrintablesBrian Steiner

Akro bin holder for newer style Lee pro 1000

I use a inline fabrication mount for my old(red base) and new Lee Pro 1000 presses. With the old style the mount came with a bracket to catch the finished rounds in a bin. With the new(silver base) pro 1000's they are lower and that same…

Pobrania
36
Polubienia
2
Ocena
0

SV08 TapChanger 2020 extrusion bracket (See Newer Model)

See OTHER bracket for download Update: 2 files have been merged into 1 as of 5-21-24 SV08 2020 Top Rail Adapter Bracket (ToolChanger) https://www.printables.com/model/887692-sv08-2020-top-rail-adapter-bracket-toolchanger T his is built…

Pobrania
36
Polubienia
10
Ocena
0
P
PrintablesProwlerON

Creality CR-10S standalone mod newer boards

CR-10S Standalone Mod for motherboard enclosure/housing Original parts are Support_Melzi.STL and Capot__Melzi.STL from: https://www.printables.com/model/392160-cr10-mod-standalone-stlstp The original CR-10 came with Creality Melzi branded…

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesStonecold

Newer version of HD RBL replacement base to 3/4 PVC

I didn't like the normal green base to the Home Depot RBL lights and I wanted these to go to a 3/4" PVC for path lighting, so I designed this replacement base. This is for the lights that were sold this year at Home Depot, which are…

Pobrania
34
Polubienia
0
Ocena
0
P
Printablescmh

Hygrometer holder for newer PrintDry spool container

Holds a standard round hygrometer in the newer style PrintDry single spool container. Inspired by the original, but that doesn't fit the container that came with the latest PrintDry Pro system. Remodeled from scratch to need less in the…

Pobrania
32
Polubienia
5
Ocena
0
P
Printablesarminth

Case for Osoyoo 5" Touch screen, newer version

Accounts for latest design changes on osoyoo 5" DSI Touch for Raspberry Pi Just a quick fix made in Tinkercad. So STL-only! Thanks for the original creation! Please also ccheckout my mount for Ender 3 (or other 20xX profiles). Best…

Pobrania
31
Polubienia
0
Ocena
0
P
Printablespyrho // 25.wf

Dyson Accessory Base (V7 and newer)

This is a base model useful for creating new Dyson accessories (V7 and newer vacuums). It provides a compliant mechanism for unclipping the accessory from the vacuum, which is a sealed away from the airflow. It's meant to be printed…

Pobrania
26
Polubienia
3
Ocena
0
P
Printablesjdubya320

Permobil Retractable Joystick Mount Cover (Newer Style)

I designed this cover mainly due to how quickly the flat black color of the retractable mount became grungy looking. It’s also a fun way to add a little bit of color to the chair. This cover will work with the retractable joystick arm…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesJuce1991

Hazet Box 854, newer style

I made this box to replace the original Hazet boxes as they keep breaking at the latch and hinges. This is a toolset that is used by every technician in my field and most have broken with normal use. I made this box able to withstand…

Pobrania
24
Polubienia
4
Ocena
0
P
Printablesreavaa
Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesTheWortLord

Drill Guide for Lacrosse Ball Scuffer/Renewer

This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…

Pobrania
19
Polubienia
3
Ocena
0
P

ADIMLab Center Mount LCD Case for Newer Machines

Center Mount LCD Case for newer "white board" ADIMLab Gantry machines. Probably does not fit older "black board" machines, but don't have one to test. This case is useful when you desire to locate your LCD screen in the middle of the…

Pobrania
19
Polubienia
1
Ocena
5
P
PrintablesKisssys

Squirrelinator Daylight Door Newer version available

This would be good if scaled up for a automated pet door. Wifi and bluetooth are available on the board. You could easily set up a message to your phone are Nodered to notify of movement. I've had a Squirrelinator trap for about 6 months…

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesTimoglor

Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder

Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder. This is admittedly a large print and will use significant material. I have not optimized this print at all. Requirements: High Temp Materials. Rubber Bands. Using…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesPoliProto

Spacious cover fixed to work with older/newer stelathburner

Standard Voron PIF settings. I printed it with eSun ABS+.

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesRetroLabs_com

BitKit Arcade PCB enclosure (remix for newer red PCB)

BitKit Arcade PCB enclosure (remix for newer red PCB) This is based on the model by twistedsymphony, however he designed his enclosure for the older version of the BitKit (green PCB). The new version doesnt need a hole for USB and also…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesPearce

Modified version for newer model RN3000 lights

Modified JascnC's original file to work with newer light verisons where there is only 1 screw hole.

Pobrania
10
Polubienia
2
Ocena
0
P
Printablestlester1970

Yeti High/Tall Handle 30oz (Originally designed for newer Ford F-150 cupholder)

This is my first 3d stl design/remix I'm posting. Just bought a 2022 Ford F-150, and the front passenger cup holders prevented my current 3D printed Yeti handles from working because they were too long and prevented the cup from firmly…

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesagent462

Gilbert Engineering Candy Cane 5' Mount (newer 2025)

Note: GE has at least two versions of 5' canes. Canes I bought in 2025 are skinnier. These mounts are for the newer skinnier 5' Cane. I have another mount posted for the wider cane. The skinnier canes are about 167mm wide. A EMT mount for…

Pobrania
9
Polubienia
1
Ocena
0

Sieve Insert Gardol GLH-S-2800 "newer model"

I bought the GLH-S-2800 in summer 2025 but unfortunately, they changed the design slightly… Otherwise, I followed the instructions of the original by 3DTom I got a stainless steel sheet cut into dimensions and screws for €5 at pro kilo…

Pobrania
7
Polubienia
2
Ocena
0
P
Printableshamgolfer

Dash Mount for VW Golf Newer Models

Dash mount for portable devices for VW Golf. I have only tested it on my 2024 MK8 Golf R. I believe it will work for other recent models of VW Golf. It requires no gluing and is totally non destructive. I designed it for a swivel mount…

Pobrania
5
Polubienia
0
Ocena
0
P
Printableslyhong H.

Motion of the ocean - for the ender 3 v3 se newer model

the thing that connects to the motor will need you to push it in abit.

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesJEO

Older Sears Craftsman Vacuum Modification to use newer filters.

My vacuum is 40+ years old, so the filter supply is nearly obsolete and more costly when found. I adapted a newer VF400 / VF500 style 5-20 gallon filter. The printed part is very simple, just a spacer. I did this a long time ago and as I…

Pobrania
3
Polubienia
1
Ocena
0
P

Haughton Elevator Emblem (Newer Variant)

This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing…

Pobrania
2
Polubienia
0
Ocena
0
P
Printables

Monorail Beam for Disney Model - 500 mm radius ***older design, use the newer ones***

5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…

P
Printables

Nozzle for Dyson V8 and Newer Models

Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…

P
Printables

Drill Guide for Lacrosse Ball Scuffer/Renewer

This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…

P
Printables

Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder

Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder. This is admittedly a large print and will use significant material. I have not optimized this print at all. Requirements: High Temp Materials. Rubber Bands. Using…

P
Printables

Dash Mount for VW Golf Newer Models

Dash mount for portable devices for VW Golf. I have only tested it on my 2024 MK8 Golf R. I believe it will work for other recent models of VW Golf. It requires no gluing and is totally non destructive. I designed it for a swivel mount…

P
Printables

Haughton Elevator Emblem (Newer Variant)

This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing…

P
Printables

Ikea Alex Handle Economy (inc handle for newer Alexes)

I removed part of the handle from the original to save on material and printing time. Does not affect functionality or cosmetic look of the original. No support needed Old handle no longer fits newer Alexes, had to modify the old handle.…

P
Printables

Fiberflex 40D printing profile. (for MK3S, but might work on newer too)

Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…

P
Printables

SV226 M54 (Thinner/Newer) Filter Holder

I found out the hardway there are about 2-3 different versions of the SV226 Filter Drawer. This is for the newer ~2026 version that is designed specifically for M54. The thinner one is the one I remixed. Magnet hole is about 6mm x 1.7mm