1779 modeli
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Youtooz released a model of the Purple Guy Sprite from FNAF a while ago, and I kinda wanted to try to recreate it. So I recreated it, and it looks pretty good. The eyes are off, but I think its ok. Please don't sell this, as it basically…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena jednego wariantu
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Soot Sprites (in the style of the Barrel of Monkeys game) Characters seen in Studio Ghibli's Spirited Away as well as My Neighbor Totoro Double-sided (eyes on both sides) These can be played with like Barrel of Monkeys, or used as…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
A No face mask from Spirited away movie. 3 parts
Wydruk około 24,63 €–30,11 € nettoWstępna wycena jednego wariantu
Pyrite-like pen holder or vase or whatever you want. Easy to size. Print instructions I printed it from Pla, without support, but there is a small point on it where it is a bit overhang, not dangerous, it can be easily repaired with a…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
Wydruk około 4,69 €–5,73 € nettoWstępna wycena jednego wariantu
I love the closed version but it wasn't working very well for me mainly because the curve of the filament was causing a jam and the clip wasn't moving freely. I have removed a part of the closed section and this allows the filament to…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Color order: Dk Green, White, Lime Green. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move…
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena jednego wariantu
Here is a version of the larger pyrites: https://www.prusaprinters.org/prints/62186-pyrite-circle-penholder-big-pyrite Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena jednego wariantu
This model comprises two parts that can be printed together. The g_code is from my Creality Ender S1 with default settings. If you want more control slice your own from the two .stl files. I used standard PLA filament The two parts will…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
You need the following 2x M2.5x4.0x4.6 Brass Heat Inserts 5x M3x4.0x5.0 Brass Heat Inserts 6x M3x6.0 Screws (And maybe 2x M3 Washers between probe mount and the extruder motor) 2x 2.5mm Cable tie (For cable management) Fan Duct:…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wasn't quite satisfied with the original version of this clip, when I downloaded and tested it a few years ago. One of them broke, and I found the filament to not be held tight enough. Yet it seemed to have much more potential than all…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I remodeled the glide from the linked model. The original glide has a cutout and ramp to more easily allow the drawer to be installed. There's a bump in the track on the drawer that presses down on the glide. The ramp makes the drawer…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This file only contains the number row keys and doesn't currently include the backspace. I do have plans to eventually put together a full set of keycaps, but learning everything all at once (3D printing, drafting, outputting files,…
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Sailrite sells and awesome thread burner for cutting off synthetic threads on sewing projects, but it doesn't come with a cap. There are threads for a screw on cap on the tool, and so I tried to figure out the thread and make a cap that…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
Organize your workspace with this Ikea Skadis storage solution for Grandma's Favorite Filament Clips by Extrutim. The original holds up to 8 filament clips , and if you need more, there's an XL version that can hold up to 12 clips . It's…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Creality CR-M4 sprite extruder plate. During shipping of my printer from a friend, the plate got damaged and bent. Since I can't find where to just buy it, I made it taking into consideration the original one. Left space for airflow. Can…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
set of 4x, 100x160mm signs; reading "Aberrantly Alliterative, Obstinately Obfuscatory, Serially Sesquipedalian, Persiflage Perpetrator". Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena jednego wariantu
Over time, the dial markings on Fritel fryers can wear off and vanish. Therefore, I have created a part to substitute the painted dial with a durable 3D-printed one. Instructions: Print in two colors to ensure the markings are visible.…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…
The Zero Point Sprite from Fortnite. This is my first actual handmade model sculpted and everything so hopefully you guys like it and yeah thank you for the support. Portions of the materials used are trademarks and/or copyrighted works…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Creality Sprite Extruder Model
This cute water sprite is small and hand held. I tried to make an air sprite but I just can't get it correct but I feel like if you print this in white it would work. The eyes can be painted or done with an MMU I personally used paint. If…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
Bracket for the free screw hole on the right Side. Only mounted with one screw. For the G-Sensor of the Sonicpad
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
In a galaxy not so far away, the classic Benchy got a serious upgrade. The Benchy Star Destroyer combines the familiar curves of everyone’s favorite 3D printer test boat with the angular might of a Star Destroyer. It’s the perfect blend…
Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Spiral vase: On Supports: None Post Process Not necessary
This took a while, but I believe it's done now, A complete Spine Chain Kit for Ender 3 V2, with a sprite pro upgrade. There are multiple variants for the link's, and mounts, depending on how much movement you want. Be reminded that if you…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
Update : 28-04-'24: Tighter version of the blade holder added. Remix of the Scraperite handle by Genghis. I like Genghis' design, nicely done with the curved shape and knurling; but the part for holding the blade didn't work very well for…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Check out also my Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder To silence the fan even more, print my Snap-On 5015 Blower Silencer Design: I have created this model with the following considerations:…
Seen that people complained about thin wall on original design so I have added strenghtening wall increasing layers to 3 instead of 1 that could be faulty. Printed this with 0.4 nozzle and 100% infill
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
I made a water sprite and I wanted him to have a buddy.
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) No supports needed Scale it as you like :)
(Keycaps for Cherry MX) If printing in the orientation that the file is originally in, supports may be necessary. Printing upside down should be the best way to print it. Dimensions of the entire file are 17.8x6.6cm which should fit on…
This design is an adapter for the ADXL345 Accelerometer to be mounted on the Creality Sprite Extruder of the Ender 3 S1. There are two versions of the adapter: The first version requires 4 M3 inserts, 2 for mounting the ADXL and 2 for…
An optimised part cooling duct for a Creality S1/Pro/Plus using the Creality Sprite extruder to maximise airflow and reduce back pressure on the 5015 fan. It is a remix of the hero me gen 7 single 5015 fan duct to make it fit for a…
Creality Ender 3 S1 Creality Ender 3 S1 Pro High Flow Modular 5015 cooling duct sprite extruder This a more refined version of the Ender 3 S1 Twin Jet 5015 Fan Duct that is a little easier to print (less supports). It also doesn't require…
This cable drag chain is a remix of various models listed in the “original models” section to fit the Sprite Pro's fat ribbon cable and heated bed cables on an Ender 3 V2. Here are the number of models that I've printed and used to manage…
Attention, this is just a joke, not for real use! Is a sudden revolution breaking out in your country? Or do hordes of zombies surround your house? Don't have any weapons, just a 3d printer? Don’t worry, you’ll be done in a two hours and…
The model supports the connection and rotation of the cable for the Creality Sprite Extruder Pro for use on an Ender 3 with a linear rail. Supports are required. If you would like to buy me a cup of coffee .
I wanted a way to keep the ribbon cable on the Sprite Pro extruder raised off the bed and pointing to toward the back of the printer so I slapped this together. Get your Prusameters… Post your Makes! If you like this project, please don't…
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
This mount goes onto the Sprite extruder, and makes the CR touch inline of the nozzle. I.e it makes the y offset of the probe 0. New offset is- (-55.5 , 0) You will have to update the firmware with the new offset values. Also, this model…
The ribbon twister should be printed with the cable entry side on the bed without supports. Cable clips will possibly need a raft.
The legendary boss sprite. I printed it in red and then painted the black and white sections. It can be printered multicolour but would take about 2 days if you print the same size as I did.
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
A new take on the ribbon cable strain relief for the Creality Sprite Extruder. ~6 grams in PETG. See it in action here: My print settings: PETG (print in the hotter range of your material for good layer adhesion, the overhangs are mild on…
No Face from the movie Spirited Away Default scale: 1:18 I recommend printing in PLA in 0.12mm layers. Also, the mask and mask parts should be printed very slowly. You can paint the mask parts as I show in the photo. I recommend flat…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer bottom surface: Print on a textured plate. For a nicer top surface: Change the Lift Z to 0.1 Top…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
A remix of the Ferux95 no face mask. whice allows for it to be printed larger.
A cute companion for your desk, hope you enjoy it, and thank you for stopping by TAICED's Profile! For more designs like this, visit our shop! Print instructions Category: Toy & Game Accessories Perfect for printing without supports!!
This is a replacement for the stock Sprite cable management that removes the stress and potential cable fatigue from the x-axis movement. Like the originals, it bends the cable to the left and routes it across and down the outside of the…
CREALITY SPRITE SONIC PAD ENDER 3 S1 S1 PRO X AND Y AXIS ADXL345 G-Sensor Mount remix X axis mount more rigid and mounted permanently, sensor screw holes enlarge to fit m3 screw. To mount on sprite extruder. may need slightly longer m3…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/259877-ender-s1-sprite-extruder-cr-touch-mount. Redesigned it for my Ender 3 V2 with sprite extruder. Reasons for remix An even slimmer verision of…
I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…
one day i searched for a haku dragon form model to print and i was surprised by the lack of choice. So i decided to make my own model. ps: it's my first avanced model for printing! please if this is impossible to print tell me. Enjoy.…
If you want to download and play the mod to know from where this character is, just click here , it should redirect you to the official FNF mod
the zero point sprite
I made a new fixture for the extruder and ABL sensor that fits the Ender 3 S1 Pro. The original 4010-part cooling fan is used to cool the cold end now. You have to adjust the ABL sensor offset before using this mod. X-axis offset: -47.7mm…
This is accurate enough for you to make mods for the sprite Mounting wheel spacing may be incorrect This file has was made starting with an extruder model ripped from one of the Ender 3 CAD files. The mounting wheels are from the same.
I was in need of adding a sprite extruder to my Ender 5 Plus. After looking at what everyone else did, I realized I can just simply add a back plate to hold the GT belts and remove the triangle piece that was coming from the left side of…
