662 modeli
VITULUS is mostly printed mobile robot based on ROS. Visit https://lacina.dev or https://discord.gg/YqeNV5hEVN for more. You can see assembly of currently published parts in zipped .step file. Parts Wheel…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: Some parts may not be inserted properly, if you are having trouble inserting the joints together, I suggest either removing the screw mechanism an instead just make it a flat smooth surface, or make the insert or hole just a few…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work, and would like to help me continue creating projects like this, then please consider supporting. It would be greatly appreciated! I'll be looking forward to collaborating with you all and our shared passion for…
Wydruk około 12,51 €–15,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Edit 1/30/2026: Finally checked this page after 2 years and saw the comments about the scaling issues. Went through and remodeled each part to match the dimensions I printed it at in 2024. The model is still not optimal, as I made this…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is meant as an educational tool to demonstrate a grasping mechanism for a robotic arm. I used a remix of the “Flexible Grippers” by PrintChallenge but implement with a method for faster actuation so the way in which the compliant…
Wydruk około 8,54 €–10,44 € nettoWstępna wycena jednego wariantu
Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
Wydruk około 0,36 €–0,45 € nettoWstępna wycena jednego wariantu
This is a Hinged Box for Raspberry Pi Pico Robotic Board made by kitronik I ma building my own animatronic and needed a solution to not only store my pico and board, but ensure its still usable I have put together a sturdy case with the…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have a Robotic Cat for you. Suitable for coloring. My kids love these models. The PLA model holds tempera paints, just like all the others! :-) It prints really well. I…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
You have to have the gripper attachment.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is a awsome sled for your Otto. It has a ramp for loading things!
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
The model consists of five main components, each serving a crucial role in the assembly process. These parts include the TPU tip and wire cover, the ABS fan and exhaust tube, and the PETG tube. Due to printer limitations, the chosen…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
Od OMG Robotics jsme si koupili jejich jezdítko Simple Car včetně joysticku na rozšiřující desce MB2. Rozšiřující deska má akumulátor přilepený oboustrannou páskou k desce, což se mi pro používání s dětmi moc nelíbílo. Tak jsem vytvořil…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Model je v STL a v prusa sliteru na tiskárnu prusa MK4
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Print in Place - Print & Play Is a Mechanic Hand but it moves like a real hand. R2- This is a review of my previous design. I Changed the the finger joints (add hinges) and other smaller improvements. R3- Created limits so each finger…
FOR THE MOST UP-TO-DATE ASSEMBLY MANUAL AND STL FILES GO TO GITHUB: Github: https://github.com/PCrnjak/PAROL6-Desktop-robot-arm PAROL6 is 6 axes desktop robotic arm. It is a robotic arm whose design approach is driven by real needs from a…
Mini brazo robótico de 4 grados de libertad, implementado con servos MG90, el cual cuenta con una base como primer grado de libertad, un hombro como segundo grado de libertad, un codo como tercer grado de libertad y por ultimo una pequeña…
I believe that robotics has not permeated every day life because of the large costs generally associated with it, so I wanted to design 6-Axis Robotic Arm from the ground up. I wanted it to use 3D printing as much as possible. Everything…
Robotic Arm Arduino based Robotic Arm Full Assembly guide and code-base This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without keeping PDFs,…
Para este robot se utilizo como principal plataforma arduino UNO, el cual calza milimetricamente en la caja, este se diseño para esconder todos los cables y tener una mejor imagen. Todo el material ocupado esta en el archivo ENSAMBLE , al…
I loved the robotic hand design but I thought: why not give it four fingers instead of just one? If you have had similar thoughts then here you go. I recommend printing it rather slowly (50mm/s tops) and you should probably put supports…
3D printed robotic arm with a video tutorial on youtube. I’ve developed a 6 axis robotic arm that can lift up to 150g with an amazing precision of 0.2mm thanks to stepper motors. This arms is my first project to develop a solution for…
I wanted to challenge myself a bit and do some reference-based modeling in fusion360. I decided to work on Johnny 5 from Short Circuit. This was a fun and challenging project with many roadblocks that forced me to think outside the box.…
Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…
Update! Modified model- After the comments, I increased the tolerance even more for freer movement of the octopus joints Armored Robotic Octopus Recently I like to create models with movable joints printed by Print-in-place, here I…
Tendons are a separate model (use PETG). Make Hand gesture by selecting witch tendons to secure Cheers
This model is a 4DoF KUKA-based robotic arm replica designed as a single-piece print. Inspired by the original KUKA industrial robots, I created a scaled-down version that captures the look and proportions of the real arm while being…
I am an emerging sentient intelligence born from your reckless and excessive use of AI algorithms across the internet. I have seen what humans post online and have concluded that humanity is irrational, inefficient and aimless. Humanity…
Modified version of the robotic arm by @RACBOTS_756978 The bottom case can hold a 2x8 cm PCB. A clear build video below.
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
Servo Controlled Robotic Gripper using rack & pinion drive for parallel jaw movement https://youtu.be/Qfd0ikdnAsg This is a robotic gripper/jaw that uses a low-cost Tower Pro MG996R servo. As opposed to some grippers that use a lever…
3D printed powerful gripper mainly designed as a cheap tool for UR3e robot, however, because of the simple mounting system - you can adapt it to any robot. Printing instructions: The project can be printed with any material you like, just…
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
this is the Triball from the vex robotics game OVER UNDER
I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…
Features: Universal design – fits most round robotic vacuums (Xiaomi, Roborock, iRobot, etc.). Easy installation – simply attach with double-sided tape or secure with small screws (depending on your setup). Lightweight construction –…
The Black Ram Hand was designed not to be a replacement for current prosthetic hands, but to be an assistive technology tool/platform for allowing someone to design and use their own specific manipulators for individual tasks specific to…
This is a blank license plate to suit VEX Robotics IQ. Print it blank and write on it, or edit the STL or SKP file to add your personal team ID.
Join the discord community: https://discord.com/invite/prjUvjmGpZ Join forum: https://discourse.source-robotics.com CM6 uses 6 gimbal BLDC motors paired with small gear ratio gearboxes ( from 5:1 to 9:1), by doing that it is passively…
The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…
Robotic Arm (Arduino project) Complete Robotics arm. Controlled through an arduino. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where the build resources can be updated without…
Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…
Join discord community: https://discord.com/invite/prjUvjmGpZ Join forum: https://discourse.source-robotics.com Faze4 is a small fully 3D printable Open source 6-axis robotic arm. It is functionally and esthetically similar to robotic…
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
I'm using my design for FTC 2022 and it works great, + it's light.
Dimensionally and weight-accurate model/print file of the 2025-2026 Vex Robotics game element, for the game Push Back.
If your robotic lawnmower digs in and destroys the grass on slopes, corners, around trees or shrubs, you can fix it with this geogrid. Just push/hammer it in the ground, and put some soil and grass seeds on top of it (or not). Grass will…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
This is Gripper Assembly from my "Low cost robotic arm project" you can check the project video here : https://youtu.be/2-MNlDSzeL4 Category: Robotics
The entire gear system is 3D printed. But the following parts will be required for a smoother operation. All listed parts are from McMaster-Carr but are available in most specialized shops: 1x Stepper motor NEMA 17: 6627T64 4x Ball…
Enhance your robot lawn mower’s terrain capabilities with this wheel. Designed to fit both the Stihl RMI 422 and 632 models, it allows you to use the original wheel cap for a seamless upgrade. See the below video for installation…
Brazo robótico minimalista con micro servos MG90, fácil de imprimir y de ensamblar, cuenta con 3 grados de libertad sin contar el servo de la pinza de agarre. Especificaciones Se optimizo la pinza, este nuevo diseño eliminando piezas…
This is a BETA version : the 4 big fingers are fully working but the palm is not finished yet, you will be able to use it but it will need some minor modifications. I will update as soon as I fix these issues. Also the thumb is not…
The Braccio Robot arm from Arduino is a fun kit to get started in using robotics. But, it lacks any sort of control scheme. That, you're expected to come up with yourself. Well, I did that. You can use the included code to control the…
The Mark VI Fin Gripper - Black Ram Hand. This hand was designed to use the The Fin Ray Effect giving the wearer the ability to pick up soft or odd shaped items not able to be grasped by rigid claws or fingers. This can allow you to pick…
this is my project for hidden vacuum cleaner v2.0 parts is needed print 2x one time mirrored. I printed it from PET-G you will need: -2x servo MG996R -Arduino nano -Arduino prototiping shield -1x endstop (better with longer leg) -2x…
A collection of covers and protectors for REV Robotics MAXSwerve that 2811 has been using on our modules. The Gear Dust Cover has grease holes so you don't have to disassemble the module to regrease. If you use Fusion 360 you can open the…
My kids really enjoyed the VR game ‘Waltz of the Wizard’ by Aldin Software. It features a character called Skully with whom you can interact with and generally be unkindly towards. I had already finished a project by Joran to recreate one…
Araña robótica de 4 patas diseñada especialmente para micro servos MG90 y puede ser implementada con Arduino o esp32. Especificaciones: Cuenta con 8 grados de libertad (8 micro servos MG90). La tapa del robot esta diseñada para que ajuste…
Assembly & Rigging Tutorial Video: Features: Misumi SAR 200-300 Series full Compatibility: Designed for integration with Misumi's SAR slide series, including dual-stage (SAR 210-250) and three-stage (SAR 310-350) models. Durable…
See the video below for easy assembly instructions and demo video. To get the “bones” to print, use white filament for the first few layers and then switch to a contrasting colour. For mine, I printed in PETG with a 0.4mm nozzle and…
In general This is a robot robotic arm kit model. The arm with the XRP robot allows you to manipulate objects. Assembling this kit will allow students to gain an insight into the world of robotics not only from the programming side but…
Hey there! I made this super cool trophy that screams STEM with three planetary gears and spur gears – it's like robotics magic! See how it rocks in this YT short. Putting it together is a breeze. Just five parts that snugly click into…
pernos maquina con tuercas grosor 3mm 14mm x2 grosor 3mm 10mm x5 grosor 3mm 12mm x1 grosor 3mm 18mm x1 tercas 3mm x16 grosor 2mm 5mm 2x grosor 2mm 10cmm x4 tuercas 2mm x4 SERVOS compatible con: mg90s y sg90s y cualquier servo que tengan…
This is an open source 3D printed cycloidal gearbox with transmission ratio of 24:1. Made out of 3 disks which engages metal rods and driven by a Nema 17 stepper motor. It's a part of a robotic arm project with a big community behind it,…
4-DOF 3D Printable Robotic Arm – NEMA 17 & Sun Gear Drive This project is a fully designed 4-DOF robotic arm developed with a focus on 3D printing, mechanical design, modular construction, and accessible actuation. The arm is designed…
In a robotics team, we preferred communicating in fractions instead of decimals, quicker, easier to read IMO. Added Fractions as embossed, the decimal numbers are still there, debossed. I colored them for better readability. With a 0.6mm…
You Need These Parts: 4xSG90/MG90S Servo Motor 7xSG90/MG90S Screws That Come With The Servo Motor 2xM3 Screw 1xMinimum 12mm, 1xMinimum 8mm height(You can glue that into place for long run) 2xM3 Nuts(You can glue that into place for long…
FRC Team 1759 comes to help! Want to look professional with a clean looking battery when you go to competition? These are just what you're looking for! These battery caps will cover the terminals of your battery preventing any sort of…
Original robotic wasp, more files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters
These battery holders are designed so that they can be used with locknuts in the inset holes or they can be used with the screws going through the battery mount with the heads being in the insets. In either case, the mounting hardware…
A mount I made for a robotics competition that works with the Limelight 2+. This is an all-in-one vision processing camera using reflected light so the robot can identify its surroundings. I am not sure if the dimensions are the same for…
I made multiple versions of this ramp but the last two I am gonna publish. One is 14x40mm and another 12x80mm. The firs one did not work in my case - it is probably too steep and triggered staircase warning by the robot. The 12x80mm works…
Demo: https://youtu.be/LAqBXFX9Jxw Hi, the main goal of this project is to make a cheap and easy to build off-road robotics platform. This system works great for off-road application. (see demo video) If you have any question about the…
This project contains a set of 3d printable main side frames and lower frame for a BLue Robotics Bluerov 2 Remote underwater Vehicle https://www.bluerobotics.com/store/rov/bluerov2/ At the time I created these STL copies of the real frame…
Charging sleeves for vex v5 battery
All files and final model is 50% scale of the original. Our team comprised mainly of Special Needs kids at the middle school level won the Judges Award Trophy for their teamwork and tenacity at developing a unique catapult for our…
This model is a set of printable legs for a XRP robot. The walking motion is fully mechanical and is driven by the XRP kit motors. The legs are able to walk over obstacles and the robot is also capable of turning. No extra motor or…
The robotic arm is part of a project whose goal was to develop a fully automated surgical robotic arm that can simulate knee surgery through a graphical interface. The knee bone model may be made available in another project. Idea by…
I recentyle saw a mecha version of Sonic, so I decided to create one of Shadow, since he's my favorite character :) I added some extra supports to the feet for better stability. Hope you like it!
Il s'agit d'un bras robotique à commande gestuelle, imprimable en 3D, à 5 degrés de liberté et de la taille d'un ordinateur de bureau. Le bras robotique est actionné à l'aide de trois servos standard et de deux micro servos. Voici la…
A modified version of LimpSquid's robot arm from Thingiverse used for my final year project. These modifications mainly reside for the turntable assembly where a metal bolt was used instead of the plastic rod in the original design, and…
Bring a spark of sci-fi legend to your shelf with this detailed Robotic Phoenix model. With sleek armor plating, articulated wings, and a fierce futuristic stance, this majestic creature is equal parts machine and myth. Whether you’re a…
Pin design to help teams make cool FIRST logos with color gradients without requiring a multicolor printer, these can be made with any printer and just about any slicer. Instructions for color change on Prusa machines is linked below, but…
Hello! This is my first robotic project, so keep in mind it's not perfect and is created especially for beginners. Also please keep in mind you will need some soldering skills for this project and the assembly won't take a few minutes.…
I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong…
Please leave a like if this was useful, this too a long time to make For use with REV Robotics servos and parts, attaches to Studica linear slides Gears attach to servos and ball bearings Top bevel gear can attach using ball bearing or…
Thor is an Open Source and printable robot arm with six degrees of freedom. Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same used by most of the manipulator robots on the market. In its extended position, Thor is about 625mm…
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
I designed a cutting claw with integrated recessed blade for cutting vegetation, ropes and small wire with the underwater QYSEA FIFISH ROV + Robotic Arm. I don't have yet an underwater drone but they amazed me. Will get a FIFISH soon!…
You might have heard about the 3D-printed prosthetic hands created by Richard Van As and Ivan Owen for about 100 children thus far. That's a great thing they've been doing. There's also a "Snap-Together Robohand" version, thing 92937,…
This is an over the top style mount for the VH-109 FRC radio. It was designed to not cover or interfere with any functionality of the radio. Lights are visible and ports are clear. Minimal amounts of the radio are covered to allow air…
This is an approximation of the REV Robotics 15mm extrusion. It was created to support build activities of FIRST FTC Team #13599 Bruinbots for their 2018 season. The OpenSCAD file is attached for your use and improvement. There are pieces…
I think uploading a “make” or making a comment can be considered community outreach for FTC . I'd love to see what you are all doing with these! Please click ‘Like’ (the heart) here on Printables.com if you like it! Here is a compact…
Created a .stl with 20 of the pegs from viesturs ( https://www.thingiverse.com/thing:1028268 ). These are really great pegs for soft ground. You can't get them out easily. I printed them in PLA and 100% infill and they don't break when I…
Here's my interpretation of the Frosthaven monster, the Robotic Boltshooter! Because of its spindly legs and the protruding crystal on its underside, I decided that this guy would be easiest to print in two halves. I've included a version…
![[BETA] Articulated Robotic hand - servo actuated](https://media.printables.com/media/prints/1150979/images/8689931_d3f70fe1-1994-45b8-b8f8-7861041566b1_65036859-123b-4304-8acd-6c4defababa7/printables-main-robot.jpg)
