Wyniki wyszukiwania: standoffs

Sortowanie

165 modeli

P
PrintablesDr.Enchanted

Drone Back Up Camera for 32mm Standoffs with 120Degrees of Movement

I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
2
Ocena
0
P
PrintableseCrowne

4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required

This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…

Pobrania
3977
Polubienia
589
Ocena
5
P
PrintablesCrosslink

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Pobrania
3173
Polubienia
843
Ocena
4,67
P
Printablesbw3dp

Parametric, stackable PCB standoffs (M2-M14 holes)

These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…

Pobrania
2349
Polubienia
1123
Ocena
4,91

Snap-in motherboard feet (standoffs) for desktop use

Modified version with snap-in friction fit. No screws or threading required. The fit is a little bit tight to make sure that the feet doesn´t come lose by accident. Update: The locking tabs were a bit too tight for modern motherboards…

Pobrania
2067
Polubienia
373
Ocena
4,8
P
PrintablesZofo

Thunder Laser honeycomb flashback standoffs

These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if…

Pobrania
1097
Polubienia
98
Ocena
4,33
P
Printablesscruss

PCB Feet/Standoffs for M3

Basic "I don't want my protoboard shorting or gouging holes in my desk" feet/standoffs for M3-drilled 1.6 mm thick PCBs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Filament:…

Pobrania
1003
Polubienia
198
Ocena
5
P
Printablesmuckypops

12 mm PCB Standoffs With Nuts and Bolts, M3x0.5 thread

PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful. 12 mm standoffs with M3x0.5 threads. 3-10-19 -…

Pobrania
850
Polubienia
46
Ocena
0
P
PrintablesEcwag

Ikea Skadis With Standoffs

A remix of IKEA Skadis designs so the pegboard and standoffs don't have to be printed separately.

Pobrania
580
Polubienia
52
Ocena
5
P
Printablespjbutler

Painter's Pyramid Stackable Workpiece Standoffs

Painter's Pyramids (aka Painter's Tripods) securely elevate your project off the work surface with minimal contact, allowing painted, stained or glued projects to be completed in one session with less mess and great results. The tabs…

Pobrania
479
Polubienia
77
Ocena
5
P
PrintablesAnnTOnnn

Ubiquiti Unifi UAP-AC-LR UAP-AC-LITE UAP-nanoHD twist off mounting plate with standoffs

I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…

Pobrania
448
Polubienia
32
Ocena
4,83
P
PrintablesZach

Pegboard Wall Standoffs

I am adding some pegboards to my workshop area and I realized I needed some standoffs to give them consistent space off of my walls. What's more, the mounting screws I have were just a bit too small to work through the holes of the board…

Pobrania
318
Polubienia
39
Ocena
0
P
PrintablesArmand

M2 PCB Standoffs

I found that there are many people that posts M3 standoffs , but I could not find M2 standoffs for small circuit boards that I use in my Arduino Projects. So I whipped up a set of standard M2 standoffs in Fusion 360 in lengths that I…

Pobrania
313
Polubienia
23
Ocena
0
P
PrintablesFriger_Heleneto

RC car feet / standoffs

I designed these to secure my 10th scale race buggies in their box on the way to the track. Simply put some adhesive velcro underneath the printed feet and inside the box you want to use. Simple, easy to handle and the car doesnt go…

Pobrania
296
Polubienia
91
Ocena
5
P
Printablesspuder

m3 standoffs

A collection of m3 standoffs commonly used in FPV racing drones Category: Parts

Pobrania
274
Polubienia
15
Ocena
5
P
PrintablesGix

Toolless motherboard standoffs with clip-on retaining washers

ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components. I made these standoffs while designing a 10 inch rack…

Pobrania
259
Polubienia
70
Ocena
5
P
PrintablesFlorian W

Lily58 Case with 7mm standoffs

Lily58 Case with 7mm standoffs Print instructions 4 layers top 4 layers bottom 20% gyroid infill support as you wish

Pobrania
257
Polubienia
16
Ocena
0
P
PrintablesBasementLAB

Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10

Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…

Pobrania
245
Polubienia
7
Ocena
5
P
PrintablesBrandonN

NVIDIA Jetson Nano Mount & Standoffs

A small combination mounting bracket and standoffs for an NVIDIA Jetson Nano developer kit. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.

Pobrania
218
Polubienia
6
Ocena
0
P
Printableszielandy
Pobrania
203
Polubienia
23
Ocena
0
P
PrintablesCyKoore

Laser cutter standoffs/anchors for 1mm-7mm material (with strong 25x5mm magnet)

A compact magnetic riser designed to hold thin materials flat on a laser cutter honeycomb bed. The block contains a 25×5mm magnet that securely attaches to the steel honeycomb surface, keeping the riser firmly in place during cutting or…

Pobrania
201
Polubienia
38
Ocena
5
P
Printablesradicalreel

Insulation plate and standoffs for BTT Piggyback36

Insulation plate and standoffs for Bigtreetech Piggyback36, for extruders like Orbiter, Sherpa ect. https://paypal.me/radicalreel Use heat inserts for the standoffs The 1mm gap between stepper and insulation plate is intentionally to get…

Pobrania
193
Polubienia
19
Ocena
0
P
Printablescontrapuntal

M3 T-Nut for Ikea Skadis Pegboard using brass standoffs

These are M3 T-nuts for IKEA Skadis using M3 brass standoffs/spacers. On Amazon, you can search for "brass m3 spacer standoff female" and you should find kits of these. The sets will come with female-female and female-male. The…

Pobrania
192
Polubienia
42
Ocena
5

VW Beetle Type 1 Decklid Standoffs

My take on the classic Empi deckled standoffs Designed to use your original deckled mounting brackets these accept 3 M6 nuts per bracket and bolt onto the original location of your car to space out the top of the deckled to improve…

Pobrania
169
Polubienia
22
Ocena
0
P
PrintablesMakerMylo

LDO Orbiter2 / Sherpa Mini Nitehawk36 Mount with Standoffs for NH36

Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…

Pobrania
166
Polubienia
17
Ocena
0
P
PrintablesChris Borge

FIXIT bamboo standoffs.

Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…

Pobrania
156
Polubienia
44
Ocena
0

OpenBuilds BlackBox panel mounts/standoffs

These are mounts/standoffs to mount the OpenBuilds BlackBox on a panel. The distance between the BlackBox and the panel will be 15mm to allow airflow on all sides. To complete the build, you'll need 4 M3 thread inserts that can be…

Pobrania
148
Polubienia
8
Ocena
5
P
PrintablesDJ

Model Railroad N Scale Standoffs

I designed these Standoffs from 5mm to 60mm to support N-Scale Railbed Pieces

Pobrania
139
Polubienia
17
Ocena
0
P
PrintablesRue_Mohr

M3 standoffs

The design files for these allow for making standoffs for use with 4-40, M3 and 6-32 screws. I have included various sizes for M3 screws. These are sized such that the screws should self-thread. The hex profile fits a ¼" wrench nicely.

Pobrania
136
Polubienia
19
Ocena
0
P
Printablesjustnolimit

Walksnail 20mm to 25mm Mounting Adapter with 10mm standoffs

Mounting bracket for walksnail avatar vtx, specially designed for mamba f722 wing fc but can be used with any 20mm mounting holes. Designed with 10m standoffs to make room for servo connectors.

Pobrania
132
Polubienia
4
Ocena
0
P
PrintablesMajor Hack

M3 Heatset Standoffs 10mm-30mm

Use one M3x4x5 heatset insert on each side. Prints fine on it's side without supports. Feel free to comment if you want a different size, or make it yourself using the OnShape CAD files

Pobrania
131
Polubienia
9
Ocena
0
P
Printablesracerethan

Printed M3 Hex Standoffs For SPAMF

Printed 20mm and 12mm hex standoffs for the SPAMF homemade nerf blaster. I have not physically printed this yet, but I have used the same M3 hole dimension as my metric printed standoffs for the caliburn. I think it should be fine. I also…

Pobrania
127
Polubienia
19
Ocena
0
P
PrintablesT-MAN

SPAMF M3 STANDOFFS

Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the…

Pobrania
123
Polubienia
35
Ocena
5
P
Printablesmorf

Walksnail avatar antennas mount fpv drone copter standoffs

This is a mount/holder for walksnail antennas to fit standoffs that have 20mm distance between each other. There's a bunch of models that are available online but none of them fitted. I decided to create my own from scratch. It fits…

Pobrania
120
Polubienia
14
Ocena
0
P
PrintablesCableFPV

M2 and M3 Cylindrical FPV Standoffs

M2 and M3 standoffs for FPV drones in common sizes. Material Details: Supports: No Infill: 100% Filament brand: Hatchbox Filament material: PLA

Pobrania
111
Polubienia
5
Ocena
0
P
PrintablesLilMikey

Motherboard Standoffs

These simple little standoffs are good for attached and supporting electronic boards (including motherboards) to wood. They are designed so that standard motherboard mounting screws or #4 wood screws can be used to secure the motherboard…

Pobrania
110
Polubienia
18
Ocena
5
P
PrintablesTed Green

PCB Round Standoffs (centered)

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hYssL5E5sIt Category: 3D Printing

Pobrania
103
Polubienia
6
Ocena
0
P
PrintablesMateusz Tokarz

M2 Screw Spacers / Standoffs | 15 Sizes (3-25mm)

BOM: Printed with ROSA3D High Speed PLA Light Gray A must-have utility set for electronics, DIY projects, and RC hobbies! If you've ever needed to mount a PCB securely above a chassis, create a gap between components, or if your M2 screw…

Pobrania
101
Polubienia
10
Ocena
0
P
PrintablesEd Ivory

Raspberry Pi 3 UCtronics 5 Inch Touchscreen Standoffs UC-586/UC-595-

These standoffs were were made to solve the problem that the screen manufacturer didn't solve: acceptable mechanical fastening. I used the following parts. Screen: https://www.amazon.com/gp/product/B085MXM2M2 Standoffs:…

Pobrania
97
Polubienia
7
Ocena
0
P
PrintablesKristian

(Extra) Low-Level Heatbed Standoffs / Dampers / Leveling Colums / Spring Replacement for the ELEGOO Neptune Heatbed springs

The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…

Pobrania
91
Polubienia
16
Ocena
0
P
Printablesborschaddict

VIFLY Finder 2 Case | Standoffs Mount | It's FPV Era 5

UPDATE: v0.2 features a vertical side grill for easier print. This case is designed to mount VIFLY Finder 2 to the rear standoffs of the It’s FPV ERA 5" frame. It was modelled around the O4 version, with enough space for the dual-antenna…

Pobrania
87
Polubienia
14
Ocena
0
P
PrintablesGreasemonkey945

Unifi G4 Doorbell Standoffs

This is a set of Unifi G4 Doorbell standoffs that I have created. They are nothing special, but they are some of my first designs I have made from scratch. There are 2 special versions that are made for my use cases, but I have uploaded…

Pobrania
87
Polubienia
8
Ocena
0
P
PrintablesPaulGregg

Plant Pot Feet Standoffs Triangle 70mm x 56mm

Small plant pot feet/risers. Trivial to make whatever size you need by resizing/scaling X and Y axis in the slicer. I had a bunch of these from Amazon previously, so I recreated my own copy of them (original in photo). Can fit 15 on a…

Pobrania
85
Polubienia
6
Ocena
0
P
PrintablesInventorIan

Simple M4 Motherboard Desk Standoffs

Just a simple set of feet to use for keeping a motherboard [or something else] off the ground/a desk a little bit. Two varieties with a 12mm or 16mm deep hole, both with and without a little divot underneath (for use with those rubber…

Pobrania
85
Polubienia
7
Ocena
0
P
Printablesypatel9

Motherboard Standoffs

Simple standoffs used to mount a PCB to any surface. I used superglue on the flat side and any motherboard screw to self tap into the holes on this model. Print and screw these into a motherboard (or any PCB), then add glue and drop your…

Pobrania
84
Polubienia
10
Ocena
5
P
PrintablesThatJuicyLemon

Flywoo GPS GOKU GM10 Pro V3 holder 24mm standoffs

Holder for the GOKU GM10 Pro V3 GPS. It will fit on 24mm spaced standoffs. The holes are 6mm in diameter. Use the auto rotate in your slicer for best printing orientation. I recommend using auto tree supports only on buildplate.

Pobrania
84
Polubienia
5
Ocena
0
P
PrintablesYell

Trident R1 motor spacer / standoffs for leadscrew coupler V2

This one here is or Trident R1 only R2 is here This is a V2 of my first version which still runs fine in my trident but adds a couple of QoL improvements smaller Z height so there is room to route cables below, also fits nicer with the…

Pobrania
77
Polubienia
19
Ocena
5
P
PrintablesDrakorex

Corsair 570x Glass Standoffs - Remove Dust Filters

These are replacement standoffs for the 570x case. The short ones are used for inside of filters or the top front plastic. The long ones are used if you want to remove the filter and still use the glass. These use the original thumb…

Pobrania
74
Polubienia
0
Ocena
0
P
PrintablesViragored

Quick and Easy Spacers Standoffs Washers - Parametric customisable

This began in my earliest days with a 3D printer and OpenScad. I've updated the original code to Version 2 which does a better job of laying out the spacers on the print bed. They will also print a little faster than before because of the…

Pobrania
69
Polubienia
5
Ocena
0
P
PrintablesArea51

K40 40W Laser Table Disc Spacers/Standoffs M3/M4 Bolts

This is a remix with metric bolts, M3/M4. In my remix the disc is 20mm and and a bit thinner. STL model for both M3 and M4 screws (I use M3x30 screws). >> If you like it, please leave a like, rating or a tip... :) Print Settings 0.20mm…

Pobrania
65
Polubienia
16
Ocena
4
P
PrintablesTed Green

PCB Round Standoffs

I just had to create my own round standoffs for pcb boards. Use adhesive or 3M rounds to secure. I also have used gorilla hot glue, and it works too! Category: 3D Printing

Pobrania
64
Polubienia
5
Ocena
0
P
Printablesorotusso

Land Rover Discovery 2 "A" Pillar Standoffs

Replacement mounting standoffs for a Land Rover Discovery 2's “A” pillar. To use this part, you need to cleanup the mounting surface of the previous tab by filing down what remains of the original tab and its supporting fins. Then affix…

Pobrania
61
Polubienia
6
Ocena
5
P
Printablesthenicnet

Thick HDD Riser & Standoffs for Minisforum UM560/UM580

I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth. You will need longer M2.5 screws. I have texted M2.5x20mm…

Pobrania
59
Polubienia
7
Ocena
0

Ultimaker Original + Standoffs / Feet

Snap on these standoffs (or feet) to your Ultimaker to help keep your work surface and printer safe from scratches. They also provide enough height to mount the power supply to the bottom of the machine, reducing its overall footprint…

Pobrania
56
Polubienia
2
Ocena
5
P
PrintablesMiles L

Ender 3 V2 4020 Fan Cover, M3 standoffs

Remix of mplantain's original file, with modified standoffs for the hotend fan. I printed the original and wanted to use M3 bolts/heat inserts for all standoffs. The standoffs for the hot end fan were too small for me to set M3 heat set…

Pobrania
55
Polubienia
3
Ocena
0
P
PrintablesWolfgang Nagele
Pobrania
52
Polubienia
2
Ocena
0
P
PrintablesDocBandit

M2.5 and M3 Heat Set Insert Standoffs Mount/Foot

Simple M2.5 and M3 Standoff Feet designed for versatility and ease of use. These standoffs are compatible with M3 x 5 x 4 and M2.5 x 3.5 x 4 heat-set inserts, making them ideal for various electronic mounting applications. Once printed,…

Pobrania
50
Polubienia
4
Ocena
0

OpenBuilds power supply (PSU) panel mounts/standoffs

These are mounts/standoffs to mount the OpenBuilds power supply (PSU) on a panel. The distance between the PSU and the panel will be 15mm to allow airflow on all sides. To complete the build, you'll need 4 M3 thread inserts that can be…

Pobrania
49
Polubienia
2
Ocena
0
P
PrintablesEccentriclulz

SPAMF Printed Standoffs for 3M Bolt

12mm and 20mm 3m through bolt standoffs for use in the SPAMF. Two of each is required. Sand to fit as needed. Recommended to print all 4 upright on a raft simultaneously.

Pobrania
47
Polubienia
5
Ocena
0
P
Printablesjustnolimit

Walksnail 30mm to 25mm Mounting Adapter with 15mm standoffs

Walksnail 30mm to 25mm Mounting Adapter with 15mm standoffs

Pobrania
46
Polubienia
5
Ocena
0

PowerBook Duo 2300c Screen Standoffs

If the standoffs securing the display housing on your PowerBook Duo 2300c have finally crumbled, these replacements should get you sorted. You'll need to snip away what's left of the original ones, and keep the brass inserts. Sand down…

Pobrania
46
Polubienia
2
Ocena
0
P
PrintablesUoAoE3D

Pegboard Wall Standoffs / spacer

I have metal pegboard that has some space behind it. The original Wall Standoffs were shorter than what I needed so I increased the size to 1.7cm to accommodate the needed space. I've also add a space to hold a m3 nut in place so it can…

Pobrania
46
Polubienia
8
Ocena
0
P
PrintablesMartin Kessler

DJI Air Unit Camera Mount for 27mm Standoffs

I adjusted jlaszlo's DJI Camera holder of Standoffs with 27mm instead of 30.5mm Angle is 25° File is only for left side. For right side please mirror it in your Slicer, since that is much easier than doing it with a imported stl in Fusion…

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesWire

PCB stencil printer board standoffs

This is a set of standoffs to support 1.6mm and 0.62 mm thick boards. These were designed to work with the PCB stencil printer described here: https://dengler-mechatronik.de/?p=560 (not my design) The bottom of the prints has pockets for…

Pobrania
40
Polubienia
5
Ocena
0
P
Printablesphrogpilot73

Remixed MFG Crosswind Extended Wall Standoffs

The original extended wall spacers perfectly fit my Crosswind/desk setup. However, when printed with Inland PLA+, with 75% infill - there was still too much flex in them. I added horizontal bracing to reduce the flex, and a square…

Pobrania
40
Polubienia
3
Ocena
5
P
PrintablesSmika

KayouMini 2 Antenna BackPack 12mm Standoffs

Remix of the backpack for my two antennas, space for wires underneath and antennas up top.

Pobrania
38
Polubienia
5
Ocena
0
P
Printablespatshead

Knobs for M3 Brass Standoffs (for FlashForge Creator Glass Clips)

We've been using the Corner Glass Clips +3mm with our FlashForge Creator Pro printers at TheLab.ms Makerspace for quite a while now, and we're quite pleased with them. We've been using the spare wing nuts that shipping with the printers,…

Pobrania
38
Polubienia
4
Ocena
5
P
PrintablesJay Vee

Creality K1 SE Camera Mount - Stronger screw standoffs and tighter fit

In printing @OnkyTonk's model that this is based on, I had the screw posts break several times, twice it happened when just pulling it off the build plate. I'm not a fan of using glue for such small pieces, they tend to move before the…

Pobrania
37
Polubienia
2
Ocena
0
P
Printablesclintkolodziej

Capcom CPS3 Standoffs for Jasen's Customs/TR Fightstick Metal Cases

This model is a standoff for CPS3 mainboards in custom metal cases by Jasen's Customs or TR Fightstick. Placing standoffs on the bottom of the CPS3 mainboard prevents unnecessary flex when inserting the security cartridge, which is a…

Pobrania
37
Polubienia
1
Ocena
0

Skadis Panel Standoffs - 27.5 mm distance. For support and clearance of the back of a panel.

Standoffs for Skadis panels. Use with my panels, Ikea, or 3rd party panels. These standoffs set the panel face at 27.5 mm from the wall. Features a recessed bottom if you want to attach a 10 mm diameter felt pad. Example pads include…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesAltirix

T212 Coolermaster AM4 Mount Standoffs

Remixed from OGkush standoffs, kept having issues trying to use them myself. print sideways so holes for nuts are facing up. Changes From Original: use 2x square M3 nuts per stand-off, one for the backplate screws, the other holds cooler…

Pobrania
36
Polubienia
0
Ocena
0
P
PrintablesGoogliola

Differential Joints with standoffs for RC Cramer

Use M3x5x20 female to female hex standoffs. Brass standoffs are slimmer than nylon, so pick the right version (4.6mm vs 5.6mm). Use M3 x 6 screw to secure the standoffs on the gear side. I advise to replace the other small gears as well…

Pobrania
35
Polubienia
11
Ocena
0
P
PrintablesLimpfish

1/2" conduit standoffs for painting

I wanted my filament storage racks to not stand out so much against the white walls. Without much room for overspray or to suspend 5ft pieces of conduit, I opted for some feet to spray horizontally.

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesThatJuicyLemon

Flywoo GPS GOKU GM10 Mini V3 holder 24mm standoffs

Holder for the GOKU GM10 Mini V3 GPS. It will fit on 24mm spaced standoffs. The holes are 6mm in diameter. Use the auto rotate in your slicer for best printing orientation. I recommend using auto tree supports only on buildplate.

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesStoat Roper

LG Fridge Door Handle Standoffs

For LG Model #LRTN22324TT from around 2004 but I've seen other models with the same type of handle standoff as well. This part is no longer available from LG. Top and bottom standoffs are included.

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesHarald Wagener

EBB36/MKSTHR36 mount adopted for nylon standoffs

Just a simple change I did so I would not need new standoffs.

Pobrania
34
Polubienia
1
Ocena
0

Ivar-Mount for Skadis-board with Standoffs

Simplified the shape to make it more symmetrical. Print the adapter twice and and orient the holes so they are closer to each other when attaching the top and bottom standoffs I had to drill down the holes for the Ivar-Pegs a bit, so…

Pobrania
34
Polubienia
10
Ocena
0
P
PrintablesPeterthinks

Pushup standoffs for 1" dumbbell bars

Two versions. Normal and extended for people using larger diameter weights. Turns your 1 inch dumbbell bars into push up bars. Also keeps your weights from rolling around which is nice. Mix up your workout. Category: Sport & Outdoors

Pobrania
33
Polubienia
9
Ocena
0
P
Printablesmariusbach

Ubiquiti Unifi USG Standoffs - low profile

Thought low profile is enough for my rather open setup of the USG and a TP-Link 8port low energy switch below. Works nicely, lets enough air through and supports the USG to sit comfortably. Thanks for the SketchUp files from wpns, but I…

Pobrania
33
Polubienia
1
Ocena
0
P
PrintablesRobert Miller

Belt clamps for printhead using hex standoffs

Updated design that just uses a 3d printed GT2 pulley and a clip that expands and holds the belt in place. This is designed for heads using hex standoffs.

Pobrania
33
Polubienia
8
Ocena
0
P
Printablesdgibson.pmp

Remix standoffs and connector for Modular staging base

I liked the overall design, but found the standoffs (or legs) not at all secure and very wobbly so I added additional surface area at the bottom so it had more stability. I also added some tabs at the top so there was 3 point of contact,…

Pobrania
33
Polubienia
3
Ocena
0
P
Printablesstefi01

cross fire standoffs 30mm high, 3mm inside diametre, 8mm outside dametre,fits 50mm x 4mm bolt

Customized version of http://www.thingiverse.com/thing:109744 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=109744 Instructions Using the following options: fragments_Outside = 12 build_plate_selector =…

Pobrania
32
Polubienia
0
Ocena
0
P
PrintablesCatGunStudio

Cooler Master Masterbox 5 Lite Front Panel Standoffs

I needed to solve the issue with overheating and lack of airflow on my sons' builds. So, I remixed this and altered the orientation for strength since they were smaller and more fragile. This is a remix from…

Pobrania
32
Polubienia
0
Ocena
0
P
Printablesspiggytech

standoffs for Fractal Meshify C Front Mesh

These are some quickly assembled standoffs to extend the Mesh section of the Fractal Design Meshify C. The intent is to give +/-25mm of space so that a longer GPU can be used in combination of a standard thickness radiator by placing the…

Pobrania
32
Polubienia
12
Ocena
0
P
PrintablesAntipode

WWG2 EBB36 PUG mount for 21mm standoffs

EB36 board comes with 21mm long brass standoffs. Using them results in the third point attachment leg not reaching the WWG2's body by 1.4mm. This remix simply adds 1.4mm to the length of that leg, so that you could use the 21mm standoffs…

Pobrania
30
Polubienia
3
Ocena
0
P
Printableswikallen

c64 breadbin case standoffs

Motherboard standoffs to replace cracked, broken or missing standoffs in the bottom of the breadbin cases. I made them extra wide on the bottoms for enough glue to surface contact. Sand down what is left of the broken standoffs. Screw the…

Pobrania
30
Polubienia
5
Ocena
0
P
Printablesjmacz

PowerBook 160 Chassis Standoffs

This replaces broken plastic standoffs in the chassis of the Apple PowerBook 160. Will probably fit other same generation PowerBooks but only tested with the 160. Transfer the brass inserts from the stock standoffs. You can superglue or…

Pobrania
29
Polubienia
3
Ocena
0
P
Printablesthedsi

Octopus DIN rail mount voron heat insert and printed standoffs

Uses VORON stule heat inserts and include printed standoffs

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesAndrei Aldea

10x2mm Magnet PCB Standoffs - BeagleBone, Raspberry Pi & More (M2.5)

Make sure to add the pause in your Slicer of choice on layer 12 before printing so you can insert magnets!!!! These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets. The 3MF files have…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesYoufu

Apex EVO ELRS Antenna Mount round standoffs

My previous ELRS antenna mount was good but it was bulky and heavy so I redesigned a lighter version. Print in TPU without supports This mount only supports round standoffs and not hexagonal standoffs as I had switched out the stock ones…

Pobrania
28
Polubienia
2
Ocena
0
P
Printablesprestia

Oui-Spy Battery Standoffs

These are simple standoffs designed to hold a battery between Colonel Panic's Oui-Spy PCBs . One version is designed to accommodate an SMA antenna; the other does not. These are designed to be used with a 501646 lithium battery, like this…

Pobrania
27
Polubienia
3
Ocena
0
P
Printablessrbiceek

Goku GM10 mini v3 w/compass 18mm standoffs/ tbs source one v5 5inch mount

mount for the goku gm10 mini v3 w/compass for the back of your frame with 18mm standoffs so simmilar to tbs sorce one v5 5 inch print with print settings for your tpu/tpe for supports just look to the print file with your g/code viewer

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesOnewheeld25

Gemini Elrs Reciever Mount for 30mm spaced Standoffs

Holds a Gemini Elrs Reciever Snugly

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesJon H

Nissan Leaf Charger Standoffs

Needs 4 #8 trim head screws 2inch+ or #8 or #9 round head screw 2.5inch+

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesMonkichi57

37mm standoffs

Created 37mm standoffs/spacer to use with my MKS Monster8 cooling fan ( https://www.thingiverse.com/thing:5428059 ) and DIN mount ( https://www.thingiverse.com/thing:5428083 ). The hole is big enough to fit M3 screws. Print Settings…

Pobrania
24
Polubienia
2
Ocena
0
P
Printablesracerethan

Round and Hex Standoffs for U Series Caliburns

Printed hex and round standoffs for U caliburns and derivatives. Fit in standard u channel parts, not edited channel parts. Round standoffs are for grip assemblies and can be used in any grip. Should help people who needs standoffs but…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesMauxx91

Offset standoffs for Orbitool O2 for OrbiterV2 into Dragonburner v8 Stealthchanger v1.1 tool plate

I'm assembly a tool in the Stealth changer ecosystem, and i encountered an interference in the original mounting point that i solved with this offset standoffs. You can use this in case your building a tool with: Orbiter v2 Drangon burner…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesNahuel

v4 camera top for Micro 105 FPV Quadcopter - Nylon Standoffs

This is a simple mod that replaces the micro105-top-v4-top-camera part so you can use nylon stand offs. I thought of this to be used with this kind of standoffs , that are kind of a standard in diy drones. Why would you do that? Nylon…

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesColton Tabler

2020-2024 Ford Explorer ST ECU Cover standoffs

These standoffs are designed for ECU cover styles such as those from Fenfab and Huston Speed Freaks. They help prevent the cover from bending or warping during installation by providing proper spacing and support. The standoffs are…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesTechMagic3D

TRX-4 Assorted Slider Standoffs

I found an amazing design from chrismofer here ( https://www.thingiverse.com/thing:5358689 ) but the shims were a bit too high for my application as I'm using custom rock sliders, so I put the file in TinkerCAD and made some assorted…

Pobrania
21
Polubienia
2
Ocena
0