Wyniki wyszukiwania: sv07

Sortowanie

186 modeli

P
PrintablesChristian Vick

CV's OrcaSlicer Presets V1.5.5 for SV07/Plus & klipperized SV06/Plus

Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…

Pobrania
7238
Polubienia
455
Ocena
4,81
P
Printablesjoescalon

SV07 Plus Slicer Additions

Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…

Pobrania
2624
Polubienia
109
Ocena
5
P
PrintablesJoshii_H

SOVOL SV07 PLA print profile (PrusaSlicer)

You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…

Pobrania
1817
Polubienia
54
Ocena
5
P
Printablesbassamanator

SV06/SV07/Plus Profiles SuperSlicer PrusaSlicer

🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…

Pobrania
1677
Polubienia
83
Ocena
0
P
PrintablesMartijn

SV06 Plus and SV07 plus Z Axis leveling tool

Fast Check if your Z axis is stil level with the bed on your Sovol SV06 Plus. I remixed these from the SV06 ones because after homing the SV06 Plus has a different gantry heigt. After homing the printer head and turning off the…

Pobrania
996
Polubienia
111
Ocena
5
P
Printables3DPrintDemon

SOVOL SV07 Extruder Ribbon Cable Support Extension

…Please be sure to hit like & post a make, I'd love to see your prints! Print on its flat EDGE as this will provide the strength you need in this orientation, that's important! Don't print too fast or you could pull it off the bed, use a…

Pobrania
983
Polubienia
81
Ocena
5
P
PrintablesKryby

Conversion kit for the Spine cable chain for the SV07 & SV07 Plus [Fixed]

Updated 01/28/2024, 28/01/2024 for the rest of the world. I saw a few comments stating that the mounting/starting chain link was causing collision issues with the side of the printer. I went ahead and made some minor changes to the model…

Pobrania
780
Polubienia
86
Ocena
4
P
PrintablesBen Witten

Sovol sv07 led bracket

Didn't like the giant printhead housing on my sv07+ but I still wanted to use the factory led for it so I whipped up this bracket on tinkercad real quick to try out, at least until someone comes up with a better one lol added a 2nd model…

Pobrania
742
Polubienia
91
Ocena
4,86
P
PrintablesDrR00T90

Sovol SV07 - ISO Webcam Mount with Screws

Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…

Pobrania
602
Polubienia
45
Ocena
4,75
P
PrintablesChristian Vick

Sovol SV07 Spool Spacer

Avoids the unwinding of the filament from the spool, by holding the spool to the middle of the filament sensor. Please don't forget to like - I want my Prusameters! 😄

Pobrania
473
Polubienia
85
Ocena
4,8
P
Printablesjoescalon

SV07 plus "Cable Buckle"

A few people asked for the model that Sovol provided with the SV07 plus. Has to be printed with supports. It wraps around the ribbon cable where the sticker is then slides onto the X gantry cable mount area, which makes the cable stay…

Pobrania
422
Polubienia
34
Ocena
5
P
PrintablesCory Isakson

SOVOL SV07 PLUS Extruder Cable Bracket

Simple bracket to help angle the extruder cable upward and away from the cooling fan.

Pobrania
373
Polubienia
30
Ocena
5
P
PrintablesGarry H

Sovol SV07 & SV07 Plus LED Bracket

I'm not sure what the difference is between the Extruder and LEDs on the SV07 and the SV07 Plus, or even if there is one but I think this should fit the SV07 too. But if you want to remove the extruder cover to get a better view of the…

Pobrania
335
Polubienia
41
Ocena
4,88
P
PrintablesIceparrot

Sovol SV07 Plus Webcam Mount

Side webcam mount for the SV07 Plus. Mount attaches to the right (touchscreen side) attachment point of the Z-axis rails, using the existing M5 bolts. Printed in PLA with 4 walls and 40% infill to improve stiffness due to the cantilever…

Pobrania
322
Polubienia
34
Ocena
4,25
P
Printablesnixkor

Sovol SV07/SV06 Hypnotic Optical Illusion Extruder Visualizer

The back piece should press fit into the back of the stock stepper motor. The front piece goes on the shaft. I have not tested this with the extruder housing installed since I run modified cooling. Printed in PETG at 0.2mm layer height.…

Pobrania
315
Polubienia
46
Ocena
5
P
PrintablesAdam Pěcha

Cable holder SV07

It's not very pretty but it's functional :) Material: PLA and 2x3mm nut

Pobrania
297
Polubienia
30
Ocena
5
P
PrintablesPorpoise Hork

SOVOL SV07 and SV07 Plus 120mm Curtain Fan

Are you tired of your SV07 and SV07 Plus sounding like that old Eureka vacuum that Grandma had? Would you like to be able to actually sit in the same room as your printer for more than 5 minutes without your ears bleeding or going deaf?…

Pobrania
294
Polubienia
30
Ocena
5
P
Printables3DPrintDemon

Sovol SV07 Screen Pi Cooler! Cool your Screen from 60ºc Down to 36ºc!!

…Please be sure to hit like & post a make, I'd love to see your prints! SV07 pi cooler! The sv07 will run at 60°c at room temperature & over 80°c in a 30-40°c enclosure! This Pi Cooler will take those numbers down 36°c & 54°c…

Pobrania
293
Polubienia
49
Ocena
5
P
Printablesvasyl83

Sovol SV07 anti vibration feet - TPU

I noticed that my Sovol vibrated way too much while printing at 100 mm/s or more so I decided to make TPU feet to reduce the vibration. This model once printed will fit snugly on top of the original feet. Made with Fusion360 and sliced…

Pobrania
293
Polubienia
48
Ocena
4,5
P
Printablesnixkor

Sovol SV07/SV07+ 5015 Part Fan Duct

A 5015 part fan duct for the Sovol SV07/SV07+ that should work with the SV06+. This duct mounts on the front of the extruder stepper motor and will not interfere with the auxiliary cooling fan on the back of the gantry. It also has a…

Pobrania
286
Polubienia
49
Ocena
5
P
PrintablesRadzio

Sovol SV07 Plus screen holder

If you are using your printer sideways, its for ya :P

Pobrania
281
Polubienia
34
Ocena
5
P
PrintablesTubs

SV07 Tuned Profiles

SV07 Profiles and calibration guide. Black Friday is coming up, and the SV07 is the printer recommendation for those that can't afford a MK4 (yet!). With Klipper and a volcano hotend, it can print much faster than other bed-slingers at…

Pobrania
279
Polubienia
28
Ocena
5
P
PrintablesSavageLau

SV07 Y Axis End Stop

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Pobrania
277
Polubienia
28
Ocena
5
P
Printablesnixkor

Sovol SV07 Extruder LED bracket

Bracket to mount the stock LEDs on the extruder with the stock housing removed. Prints without support. Requires: 3x M3x6mm screw 3x M3 nut 2x M3x20mm screw (longer than stock stepper screws) 1x M2.5x4mm screw (reuse the original screw)

Pobrania
258
Polubienia
41
Ocena
5
P
PrintablesFatmann Makes

Sovol SV07 ribbon cable bracket

Bracket for securing the extruder ribbon cable use 2 m3x8 screws to secure

Pobrania
250
Polubienia
30
Ocena
5
P
PrintablesKappa

SV07 Orcaslicer Plate Model

This is the plate model for the SV07, made for Orcaslicer. I do not know if this format works for other slicers but I have used it successfully with Orca. To import it in Orca, unzip "SV07 220x220 Texture.zip", open your printer settings,…

Pobrania
250
Polubienia
16
Ocena
5
P
Printablesnixkor

Sovol SV07 Extruder Assembly STEP files

Sovol SV07 Extruder Assembly STEP files SV07 extruder assembly based off of publicly available Sovol SV06 parts files. SV07 extruder LED board (original model) included!

Pobrania
246
Polubienia
29
Ocena
5
P
Printables3DPrintDemon

The Vortex GEMINI High Speed Curtain Fan System X Gantry Mounted For SV07 & MANY More!

…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex series grows with Gemini! Print faster with crisper cleaner looking prints! These lightweight mirrored modular pods each carry a powerful 24v 6020 fan that…

Pobrania
229
Polubienia
76
Ocena
5
P
Printables3DwasNun

Sovol SV07 filament sensor holder

There are 4 models. With M3 fusible nut and for screwing onto M3. The sensor now has more play.

Pobrania
212
Polubienia
39
Ocena
5
P
Printablesfgjhdfjzjsg

Sovol SV07 Ribbon Cable Holder z-Axis

This cable guide is mounted to the z-axis and avoids collsions of the cable with other parts (e.g. with the large part cooling fan mounted to the x-axis). No additional cable guide (e.g. at the extruder) is needed to avoid any collisions.…

Pobrania
211
Polubienia
24
Ocena
4,8
P
Printablescjourdan87

Sovol SV07 Plus Flat Cable Holder Remix

This is a remix of this file: Flexible flat cable holder Ender 3 S1 Pro by ExpertBG - Thingiverse This bracket holds the extruder/x axis cable in place as it goes up and down the Z Axis. I found the original to work extremely well for my…

Pobrania
196
Polubienia
24
Ocena
4,6
P
PrintablesNozzleOzze

Sovol SV07 (Plus) / SV06 (Plus) Hotend 5015 Fan Upgrade

Here is my other Upgrade for the Sovol SV07 (Plus) and maybe the SV06 (Plus). This time it's an upgrade for the Hotend. The Fanduct is built in three pieces with easy assembly and connects to the original end piece → so you can print it…

Pobrania
193
Polubienia
33
Ocena
0
P
PrintablesBrubava

Sovol SV07 Texture Plate Template

Template for factoring table for Sovol SV07 printer. Get a better idea of the size and positioning of your pieces when slicing. With this template you will have more precision and accuracy when printing. Model tested on PrusaSlicer and…

Pobrania
190
Polubienia
14
Ocena
5
P
Printablesjoseph james

Accelerometer mounts for Sv07/+

Mounts for Sv07/+ accelerometer to make changing its location easier and faster. Tips and info Both mounts use the same locations and orientations as they would without the box. would recommend printing the “BOTH” file and printing the…

Pobrania
182
Polubienia
31
Ocena
4,6
P
Printablesjoescalon

SV07 Spool Holder

This is a prototype mod to move the heavy filament spool off the top of the SV07 printer, which should improve input shaping results and allow compatibility with using filament driers while printing. This has only been tested on the…

Pobrania
180
Polubienia
33
Ocena
0
P
PrintablesPremier

Sovol SV07 Klipper screen cooler

This is a cooler for Sovol Klipper Screen on Sovol SV07 Plus. I dont have any personal experience with non plus SV07 but I do believe the screen and the mount is the same. This model uses the original mount and is connected to the fan…

Pobrania
178
Polubienia
33
Ocena
5
P
PrintablesRextruction

SV07 Filament Sensor Relocating Bracket

I have my SV07 in an enclosure and thus have the filament spool mounted elsewhere that caused some excessive drag in the filament path as it passed through the runout sensor. So I made this little bracket that moves the filament runout…

Pobrania
169
Polubienia
29
Ocena
4,5
P
PrintablesBastian

Sovol SV07 - Webcam holder for Microsoft LiveCam 3000 HD

This bracket mounts a Microsoft LiveCam 3000 HD webcam to the base of a Sovol SV07. It uses existing screw holes and screws. Except for the webcam and some cable-ties, no additional materials are needed. Printing print laying on its side…

Pobrania
163
Polubienia
14
Ocena
0
P
Printableszzzy

SV07 /07+ Camera Mount ESP32CAM

A mount for the ESP32-CAM module case thing:6295703 that slides onto the Y rail tensioner. 12-5-23: added design for SV07+ based on feedback from a maker -thanks! Note: use this camera screw adapter (1/4" 20 tpi) if you have a web cam…

Pobrania
159
Polubienia
11
Ocena
4,5
P
Printableskn100

Sovol SV07 Gantry Camera Mount

This is a very simple webcam mount that makes use of the already existing dust cover on the X axis stepper motor to provide a surprisingly stable mount for any webcam that has a tripod screw. See photos for assembly instructions. It is…

Pobrania
157
Polubienia
18
Ocena
0
P
PrintablesPgain88

SV07+ Camera Mount

This here is a great camera holder! This fits the SV07+ and maybe the SV07 non + variant. This is similar the the one I tried originally but it has so many little issues I decied to just design this one from the ground up. This model will…

Pobrania
156
Polubienia
17
Ocena
4,75
P
PrintablesZanonia

Sovol SV07 adjustable magnetic probe holder

The original magnetic probe holder for Sovol SV07 and SV07+ printers does not allow the height of the probe to be changed. I've therefore designed a replacement part that allows this height to be adjusted, so that longer hotend assemblies…

Pobrania
153
Polubienia
18
Ocena
5
P
Printablesbogdankecman

sovol sv07 plus aux part cooling fan duct

very loud aux/part cooling fan on sv07plus covers only center of the bed... I made a wider one that accepts 2x 120mm fan so you can use 24V 120mm fan from sunon or noctua and have much higher cooling power with way less sound than…

Pobrania
152
Polubienia
28
Ocena
4,6
P

Sovol SV07/Plus extruder wheel

Modelled in Solid Edge 2022. I'm printed it with my Sovol SV07 plus. Fast, 16 min long print with orca slicer and 0,2 layer height.

Pobrania
151
Polubienia
25
Ocena
5
P
Printablesage age

Sovol SV07 plus part cooling bracket

Bauteilkühler für den Sovol SV07plus.

Pobrania
142
Polubienia
14
Ocena
5
P
PrintablesNozzleOzze

5015 Fan Duct Sovol SV07 / SV07Plus / SV06

This is my own, simple creation of heat sink Fan Duct. It's an upgrade from the stock 4010 blower to a 5015 blower, to prevent heat creep on Sovol SV07/SV07Plus and maybe SV06/SV06Plus. I printed the duct in ABS, but PETG or maybe PLA…

Pobrania
141
Polubienia
18
Ocena
0
P
PrintablesLouisCYUL

Sovol SV06 Plus / SV07 series 5020 Blower Fan Upgrade

What is this? These printed parts let you install Prusa's MK4S 5020 blower part cooling fan shroud - a slightly modified version, that is - on the Sovol Planetary tool head “high flow” variant as shipped on the SV06 Plus and SV07 series.…

Pobrania
127
Polubienia
30
Ocena
5
P
PrintablesShadowza

Drawer Organizer For Sovol SV07 / SV07 Plus

Sick of messing with the annoying foam inserts to organize the SV07 & SV07 plus drawers? Use this drawer insert to neatly store the tools that come with the printer! It even holds up to 10 extruder nozzles. Don't like the layout I chose?…

Pobrania
124
Polubienia
23
Ocena
5
P
PrintablesNavist

SV07+ Bed Texture/Model

Fixed author's misalignment issue with SV07+ OrcaSlicer users.

Pobrania
124
Polubienia
7
Ocena
0
P
PrintablesGlenn Thörn

Sovol-Sv06-Sv07-leveling.

Guide with pictures can be found here on my Github: https://github.com/GTreaper/Sovol-Sv06-Sv07-leveling Sovol-Sv06-Sv07-leveling. A guide on how i have achieved great first layers on the Sv06+ and Sv07+. Never try to: Home the printer…

Pobrania
123
Polubienia
66
Ocena
0
P
PrintablesGlenn Thörn

BTT SFS V2.0 For Sovol SV07/SV07+

Update(#2) 2024-01-04: Filament guide to be mounted on top near spool holder added. Made and tested by Tomas Olsson. ---------------------------------------------------------------------------------------------------------------- Update…

Pobrania
122
Polubienia
30
Ocena
4
P
PrintablesBastian

Spare nozzle holder for the Sovol SV07 drawer

This small nozzle storage holds 12 spare nozzles. It fits perfectly into the back of the small drawer of the Sovol SV07. Some thoughts which went into this: placement in the back of the drawer is sensible, since nozzle changes are not…

Pobrania
119
Polubienia
16
Ocena
5
P
Printables55ps

Sovol SV07 Printhead Cable Mount

I created a small Printhead Cable Mount for the Sovol SV07 which does not require any additional screws. Just 2 small cable ties are needed. Quick print. Works fine for me so far so I wanted to share it.

Pobrania
119
Polubienia
8
Ocena
0
P
PrintablesJustinL42

*Updated* 06/06/24 Lowered screen mount for Sovol SV07 Plus

Printed as shown in the file, no supports necessary. Printed at 45° orientation on the bed for faster printing. Esun clear petg with 240° nozzle and 80° bed. Fits stock mounting holes perfectly and uses the same screws. *I have my printer…

Pobrania
118
Polubienia
19
Ocena
0
P
PrintablesNigel

Sovol SV07+ Part cooling fan replacement duct

I had a disaster where PETG balled up on the extruder and encased my hot-end. This melted the stock part cooling duct… so I needed a replacement. Printing without a duct I managed to print this. This is not tuned in any way other than to…

Pobrania
113
Polubienia
10
Ocena
0
P
Printableszzzy

part cooling fan mount for SV07 SV07+ SV06+

Mine broke in a printhead crash. Here's a minimalistic design done in FreeCAD. Airflow goes straight to the nozzle tip where it belongs. Print sideways as shown in the screenshot. Print in ABS/ASA or PETG. Reuse all original screws to…

Pobrania
113
Polubienia
20
Ocena
5
P
PrintablesEthanC

Sovol SV07 Cable Management

The cable management on the Sovol sv07 I got is very hard to deal with. More than once the massive taped-together cable has gotten stuck in the y-axis. To deal with this I recommend using an xacto knife to un-bind the z-axis cable and the…

Pobrania
108
Polubienia
17
Ocena
0
P
PrintablesFons Philips

Sovol SV07 & SV07 Plus webcam mount

easy to assemble and easy to print camera mount for the Logitech c270, c310, Brio100, c505. The current version fits the Sovol SV07 & SV07 Plus but can be modified for other printers. hardware requirements: 1x M5x45 (or longer)

Pobrania
107
Polubienia
16
Ocena
5
P
PrintablesImho_3D

Inverted Nebula x axis camera mount for Sv07

This is a remix that fits the sovol Sv07 and maybe the Sv07+ as well. Friction fit, but you can add a little bit of tape if you need it to hold better. It is inverted, so the image will be upside down, just change it in the…

Pobrania
104
Polubienia
15
Ocena
0
P
PrintablesMihkel Mägi

Sovol SV07 Plus LED lightbar

A simple LED mount for Sovol SV07 Plus. I used an 8mm wide 24V LED strip from Aliexpress and connected it to the aux fan connector because I don't use it. Added a picture of the lightbar connector schematic for redesigning.

Pobrania
102
Polubienia
15
Ocena
5
P
Printables3DwasNun

SOVOL SV07 Display Durst Cover

To cover the display when it is switched off, keep the dust away. November 21, 2025 – Update! A cover with an internal height of 10 mm, 1.2 mm walls, and a 0.6 mm base. I modified the model and printed it with a 0.6 nozzle.

Pobrania
100
Polubienia
8
Ocena
0
P
PrintablesRoyMcNelly

Sovol SV07 BL Touch Mount

Print with supports. Very easy to print. Needs M3 screws and nuts. PLA it's just fine. [bltouch] sensor_pin: ^PD13 control_pin: PD12 x_offset: 29.5 y_offset: -28.5 #z_offset = 0.225 speed: 3 lift_speed: 20 samples: 2 sample_retract_dist:…

Pobrania
99
Polubienia
23
Ocena
4,75
P
PrintablesPslaughter

Sovol SV07 Plus Filament Sensor mount

Filament Sensor mount for the Sovol SV07 Plus. I am moving my printer to an enclosure and won't be using the spool holder, so I needed a mount for the filament sensor. Has a built-in printed spacer (as I dropped mine while changing it out…

Pobrania
97
Polubienia
10
Ocena
0
P
PrintablesNate Carlson

Remix of SV07 Cable Spine Adapter (Hot end side)

After seeing several mentions recently of the ribbon cable on the SV07 being damaged by rubbing against the auxiliary fan, I decided to print rogerquin's cable spine and the adapter for it for the SV07 by Kryby. Unfortunately, the hot end…

Pobrania
97
Polubienia
12
Ocena
5
P
Printableszzzy

Logitech C270 adapter for SV07 webcam mount

The C270 adapter works with the base, screw and nut from this mount design (thing: 6308788) . Print in the orientation shown in the print bed photo. Update 1-17-24: Revision 1 is slightly shorter in depth so the claw on the C270 can close…

Pobrania
95
Polubienia
10
Ocena
5
P
PrintablesRadzio

Sovol SV07 Plus screen holder with cooling

Sovol SV07 Plus screen holder with cooling. No need for any screws, or opening original klipper screen. No warranty void. Added a place for 5v 40mm fan (4010), pulling hot air out. Fan is connected by USB cable to klipper screen. Just…

Pobrania
94
Polubienia
19
Ocena
0
P
Printablesvasyl83

Linear rail upgrade for SV07 printed parts.

Parts needed to lift y axis 4020 extrusion in order to mount linear rails on the sides to use ender 3 upgrade kit . Print instructions: if the printer will be used with enclosure I suggest printing in PETG, ASA or ABS if the chamber temp…

Pobrania
94
Polubienia
23
Ocena
0
P
Printableszzzy

120 mm silent curtain fan upgrade for SV07 or 07+

The stock SV07/plus curtain fan sounds like a jet engine on the runway. It's also not very good at spreading the airflow uniformly. This is yet another attempt to fix that. I drew a lot of inspiration from u:Porpoise Hork 's fan duct…

Pobrania
86
Polubienia
13
Ocena
0
P
PrintablesPslaughter

Strengthened SV07 plus webcam mount

Remix to add material to sit flat against the side of the printer and two ribs to reduce flex. Print in the orientation of the second picture, no supports required. Printed with 40% infill although less may be fine with the changes made.

Pobrania
85
Polubienia
5
Ocena
5
P
PrintablesRadzio

Sovol SV07 screen holder v2

Sovol SV07 screen holder v2 non tested

Pobrania
84
Polubienia
9
Ocena
3,5
P
Printablesbutre

SV07 Plus Biqu Microprobe mount

includes optional cable clip, use as shown chop the two sets of wires they sent you with the microprobe to an appropriate length and solder them together or buy a cable with the appropriate microblade connectors. this plugs in where your…

Pobrania
83
Polubienia
12
Ocena
5
P
PrintablesJustinL42

Sovol SV07 Plus Screen mount *New 07/21/2024

Print in the orientation the file is saved in. I printed with Esun petg hs. 239 nozzle temp and 80 bed temp at 70mm/s. 2 walls and 20% infill and supports on to support the vent holes and the elongated hole for the side screw. It comes…

Pobrania
83
Polubienia
14
Ocena
0
P
PrintablesKaru990

Sovol Sv07+ filament sensor to extruder relocation + m10 PTFE fitting

When printing put small supports under the screw holes. For the relocation you can route the original sensor cable or you can make your own small adapter that uses the port on the extruder. I had only one JST XH 3pin connector but you…

Pobrania
81
Polubienia
12
Ocena
0
P
PrintablesHainsilma

Sovol SV07 Hot End Fan mount replacement

Sovol SV07 Hot End fan mount A replacement mount for the hotend / printhead fan mount on the Sovol SV07. The original fan duct crashes into the model easily & breaks itself and the model. As there is an auxiliary fan on the SV07 I did not…

Pobrania
78
Polubienia
14
Ocena
0
P
PrintablesGlenn Thörn

SOVOL SV07 Led brackets

Printed in petg Walls/Perimeters: 3 Infill: Gyroid 10% Layer height: 0.3

Pobrania
77
Polubienia
6
Ocena
0
P
Printables3DwasNun

Sovol SV07 cable holder for the print head

Deutsch: Leider musste ich feststellen, dass das Druckkopfkabel bei der Grundposition des Druckers gegen die z-Achse auf der linken Seite schlägt. Mit der Zeit ist der Mantel des Kabels schon ein wenig weg gerieben. Um einem Kurzschluss…

Pobrania
73
Polubienia
4
Ocena
0
P
PrintablesHel3D

SV07 Nozzle part fan duct

This is a nozzle part fan duct that has more “ground clearance” than the original fan duct. Also, air flow has been more concentrated to the Nozzle tip. This is a drop in replacement for the original fan duct supplied by Sovol. I printed…

Pobrania
72
Polubienia
10
Ocena
0
P
PrintablesPslaughter

Sovol SV07 Plus extruder wheel winder

Requires 1 of each model and 1 m3x10 to attach the winding knob to the wheel. Hole in the knob is small enough to lock the bolt at the tightness needed for it to wind easily but not be floppy. Fit on the initial version of the wheel to…

Pobrania
72
Polubienia
13
Ocena
5
P
PrintablesJustinL42

Filament guide with bearings for Sovol SV07 Plus

I designed this as a filament guide for the Sovol SV07 Plus printer. The hole in the top friction fits pfte tube and then the filament exits the bottom and the bearings keep the filament pulling straight down. The filament exits directly…

Pobrania
71
Polubienia
20
Ocena
5
P
PrintablesBastian

Holder for the filament runout sensor on the Sovol SV07

WARNING: I currently use this setup, but it can cause too much friction, if the spool is on the same height as the printer and the filament has to go up to the sensor an then back down to the print-head. Be sure you know what you do, if…

Pobrania
71
Polubienia
10
Ocena
0
P

Sovol SV07 Plus Angled Screen Holder

This screen holder is an extended and angled remix of Radzio's screen holder. 2 parts- Glue together with superglue. It allows you to use PGain88's SV07 Plus camera mount while having a flash drive docked to the Klipper screen.

Pobrania
70
Polubienia
10
Ocena
0
P
PrintablesJ12345

Sovol SV07/SV07+ Extruder Cover

I didn't like how large the extruder cover is for the SV07 Plus but I wanted something to cover the fan and keep the wiring clean and protected. This is similar to the original cover but without the large overhanging part obstructing the…

Pobrania
68
Polubienia
14
Ocena
0
P
PrintablesDanielB

Sovol SV07 Logitech C270 Halter

Die Motorabdeckung der X Achse muss demontiert werden und mit einer längeren Schraube kann man den Halter am unteren freigewordenen Gewinde fixieren. Neuere Stabilere Version

Pobrania
65
Polubienia
5
Ocena
0
P
PrintablesKaru990

Sovol Sv07+ filament guide

Made the smaller filament guide first but it i wanted to add a LED bar from aliexpress and the smaller has limited movement freedom when doing high prints. Both can be used with the stock spool holder and feeding from a drybox. Filament…

Pobrania
64
Polubienia
15
Ocena
4
P
PrintablesPgain88

SV07+ Long Spool Spacer

Stops your small spools from moving around

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesTalkGeek

SV07 Blower Fan Shroud

I didn't like the way the extruder ribbon cable was being dragged across the blower fan when moving - seem like it could catch on Blower Fan especially when print head moving left to right. Easy print, no need for Supports, Brim etc..…

Pobrania
61
Polubienia
10
Ocena
4
P
PrintablesEule

Sovol SV07 Drawerorganizer

This is an organizer for the Sovol SV07 drawer.

Pobrania
59
Polubienia
11
Ocena
5
P
PrintablesPaxurro

Bed Clip Sovol SV07

Imprimir con soportes y orientando la parte que sobresale cilíndrica tocando la cama. Encajan un poco justos, pero esto es buscado para que no se muevan.

Pobrania
59
Polubienia
8
Ocena
0
P
PrintablesOregonsquatter

Sovol SV07 plus rear parts fan block and baffle

Recently tried larger prints on wider areas of the bed. Discovered the differential cooling effects of the stock parts fan ducting. This is an insert that goes between the stock rear parts fan (on the X crossbar) and the crossbar. Two…

Pobrania
59
Polubienia
5
Ocena
2
P
PrintablesThiago Paim

Sovol SV07 Plus Bed Shape and Texture

Just donwload and go to you slicer config, then upload the files.

Pobrania
58
Polubienia
5
Ocena
5
P
PrintablesPorpoise Hork

SV07 and SV07+ 5015 Tri-Horn Parts Cooler

Not satisfied with the curtain fan on my SV07+, I had to come up with something that would actually work. The OEM curtain fan was too loud and caused me countless failed prints due to excessive cooling on the bed causing prints to warp…

Pobrania
57
Polubienia
16
Ocena
5

SOVOL SV07 Extruder flatcable holder

Since the holder for the flatcable is not really ideal in anyway for the sovol sv07(and possibly SV07+) - i made this design, which holds the flatcable coming from the base of the printer, and pushes the cable upwards to create a simple…

Pobrania
57
Polubienia
12
Ocena
0
P
PrintablesPgain88

SV07 Main Board Pins.

After extensive testing. I was able to find all available pins on the main board. I've updated this schematic I've seen floating around. Was not easy. If you are wondering why, well you can add more sensors, fans, physical buttons, custom…

Pobrania
55
Polubienia
31
Ocena
0
P
PrintablesAlanMG

Gantry filament guide and runout sensor mount - Sovol SV07 plus

Updated 26/4-25: New version V7 with sleeker design and threads for 6 mm PC4-M6 bowden couples as well as PC4-M10. Also slightly redesigned runout sensor mount to reduce sag. A little kit i put together to remove the spool of the gantry…

Pobrania
53
Polubienia
16
Ocena
4
P
Printablescjourdan87

Sovol SV07 Plus Filament Sensor Mount

***Update 1/24/24*** I updated the Top T-Nut channel design a bit due to clearance issues I was having with a filament sensor case I made. There is now a tab at the bottom for easier removal and the T-nut channel was moved up higher and…

Pobrania
53
Polubienia
9
Ocena
0
P
PrintablesPslaughter

Sovol SV07 Plus front panel

I am slowly replacing each blue plastic part on my printer. This is the front panel, there is no drawer. Uses the same 4 socket head screws as the factory part. I printed this with fewer bottom layers and honeycomb infill so you can…

Pobrania
53
Polubienia
9
Ocena
5
P
PrintablesLord Dreadfight

Sovol SV07 Part Fan redesign for 2 40mm fans

I created this model for my new Sovol, it is intended to work with any 40mm fan, i used two 12v fans and soldered them in series because the stock fan is pulling 24v.

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesCodeFuPanda

Accelerometer mounts for Sovol SV07 (Plus)

Remixed the Y-axis mount so the bottom rear of the extruder does not smash into it in the process of building a new mesh. I just replaced the screw attachment with a 30mm x 4mm slab. This would allow me to affix the mount with double…

Pobrania
51
Polubienia
6
Ocena
5
P
Printableszzzy

sv07 shelf clamp filament spool holder

Attach the existing bearing spool roller to an existing shelf with this clamp. STL's come in 3 shelf thickness options but I'm providing the FreeCAD design in case you need to create a custom design for a non standard shelf thickness. The…

Pobrania
50
Polubienia
12
Ocena
0
P
PrintablesPrint'osaurus

Profil d'imprimante Sovol SV07

Voici 3 profils d'impression pour utiliser Prusaslicer avec votre Sovol SV07

Pobrania
50
Polubienia
1
Ocena
0