6925 modeli
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion. Print instructions…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
This 4 Roll Tape Holder is a convenient storage solution designed to hold four rolls of packaging tape, keeping your workspace tidy and tape easily accessible. I personally use it for various types of tape, but it’s sized perfectly to…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
I was inspired by the 50mm Tape Dispenser Cutter. But it didn't work to my liking I drew it to my liking.
This is a fully 3D printed catapult capable of launching projectiles over 80 feet. The spring is attached to the arm using a hexagon, so you can add more tension by rotating the spring a little more before attaching it to the arm and to…
Has mundane office work left you in a dire need of excitement? Inject some dark thrill to your desk with this latest invention, Guillotape: The Guillotine Tape Dispenser. Imagine the Addams Family meeting the French Revolution in the…
Info: original-size casssette case with realistic tape lookalike design drawn on the case Print info: can be printed in place or separately, because as everybody knows - cassete cases can be dismantled and this in not an exception (with…
Here is an infinite tape organiser and dispenser with two measure, 55mm and 30mm. All the pieces are 3d printed. I recommande you to not use the printer files it just an exemple to show an idee of time and mass that will use for this…
Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom Update 2nd July 2023:…
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
This is a wall-mounted quilt hanger, based on a wooden design I've seen. It's simple, requires no supports, does no damage to the hanged item and looks great! All pegs can be used with all versions. V1 Simpler, and does not include hole…
TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.
I couldn't find my tapestry needle to finish my fair isle knitted project, so I made my own. I print it in 0.20 speed, 20% infill and no supports and it comes out great. Sand the tip to make it sharp. A bit of sanding overall is…
Introduction: A print-in-place beer tap handle! The threads print fine on my Prusa Mini, so there's no need to fiddle with inserts or tapping threads into the handle. Print it, use it! It's that easy! Threads are 3/8" UNC. From some quick…
V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch
I use to have a zip-lock bag of rolls of copper foil for doing stained glass. The rolls would stick together, pick up dirt, and get tangled up. When I pulled off foil to wrap around stained glass pieces, it would get twisted because the…
The classic tape dispenser for use with rolls of scotch tape or equivalent, but designed for 3D printing! Thanks to some interesting internal chamfers, this can be simply printed-in-place. In addition, the tape core included here uses a…
I'd recommend usage of the print or .3mf file, since otherwise auto generated supports will go wild on this design, and support is really only needed over the extended “tongue” feature. I also recommend that you glue or tape a razor blade…
Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar. Organisiere dein Alltag und bringe ordnung in dein Leben. Es werden zum Beispiel solche Schrauben benötigt: https://amzn.to/41Z0I4K --------------- ENGLISH -------------- Storage…
Gridfinity Tape measure holder
After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…
I made this rubber band based catapul which can shoot up to twenty meters without any problems. It is very easy and fast to print and build. You just need to find a rubber band… Have fun!
Handle for small thread taps. Useful whenever normal tap wrenches are too bulky. For taps with 3.5 mm shaft diameter and 2.7 mm square head. Tight fit when the handle comes off from the printer. But after little usage the fit is perfect.…
After making the 3-in-one Matchfit jig, following their plans, I needed to make the tapering jig stops. Now, I'm a beginner woodworker and don't currently possess the preferred tools or skills to make something that small and exact. What…
I have designed this tape hanger because I have lots of rolls of different types tapes and have a limited space left in my desk drawers, so it came to my mind to design a solution and this is what I came up with, I am using these for a…
Several plastic parts and a pair of seals are needed for the construction. You can see how the valve works in the video . The valve is primarily designed for plastic canisters 10l,15l.... Lid for canister is currently not modeled, and is…
This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.…
After designing and printing the insert (See https://www.printables.com/model/211394-3d-print-of-an-insert-for-garden-hose-connection ) and the compression nut (See…
Needing boxes for my homemade taps, I searched for a simple solution, but ended up making a new design. The box is two part - bottom and lit with simple hinge and lock. The shown boxes is printed in PETG but other filaments can be used.…
This 2 Roll Tape Holder is a compact storage solution, designed to hold two rolls of packaging tape to keep your workspace tidy and your tape easily accessible. I personally use it for my fragile package label tape, but it’s sized…
There are 2 GCODEs included. One of them irons the top of the print to give it a smooth and gapless finish, but it is almost 25 minutes longer…
Casette Tape Print Big. Add wall hang in back.
This is a holder to organize your tapes. It is composed by: x2 3d printed mounts x3 plywood stick (for dimensions check the third picture) x4 M3 screws to hang it in the wall
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Had problems with the visible area in the picture of the camera. Had to tilt it a little bit down, that is what this stand is for. Has a bajonett like the original wallmount. Used PLA, supports needed for the bajonett.
For my use case, I needed a stand with a steep angle to see the floor in one of my rooms. It fits really snug, so depending on your printer and settings you might have to experiment with the step file a bit.
By now I've printed some hundred dice towers. They often have a castle like design and where there is a castle siege weapons probably aren't far away. Anyway, I felt compelled to build one. And here it is: The Dice Catapult. It's pretty…
Logitech charges about $150 for the metal wall mount plate for the Logitech TAP tablet for Teams Rooms. We couldn't wait that long so I designed one and its so good we're using them all around our buildings now (10 units). This alone paid…
wrench, for taps M24 aerator, tap strainer insert external thread, Tap / Faucet Aerator (Perlator) filter Tool
Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
Ryobi battery mount with option for electrical connections. Wall mountable with two flat head screws. Easily store spare batteries on your workbench, or connect them to other electronics (maybe a battery backup for your 3D printer ) See…
🇬🇧 Here is a Tapo C200 camera mount for the Ikea Skadis panel. Printed in 0,2mm with 20% infill (The camera isn't heavy). The hooks need supports to print. Fusion 360 file included if you want to make changes. 🇫🇷 Voici un support de…
Edit (2025-10-14): All models have been re-uploaded in their proper print orientations as V2. _________________________________________________________________________________________________________________________________ This is not a…
This simple clip allows you to take accurate measurements of inside corners with a tape measure. No more guessing what the length is inside the bend! Just slide the clip up to the corner, pull the tape back and read where the edge lines…
Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.
Designed a logo for for the Jagermeister 1 bottle Tap Machine top cover Size of the model: 195x44x2, but it can be scaled to your needs Printed with filament change at 1mm, 0.2 layer, 0.4mm nozzle ok MK3S in about 1h. Can be printed with…
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
Introducing our 3D printed hanging hooks for curtains and blinds with pleat curtain tape. Designed as an alternative to IKEA RIKTIG. Available in three different variants. Two variants allow for parallel or perpendicular hanging of…
Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…
Pretty basic idea: 6in Tapered Candle Mold. Just print both halves, bottom up with organic supports - to hopefully produce as smooth a mold as possible. Should produce a tapered candle about 6 inches long with a ¾ inch base. I'll post…
This is a guide for tapping an M5 thread into the end of I-type 2020 aluminum extrusions. These are the type with 5mm slot width. The model was inspired by existing designs like this one:…
This print does tend to peel up away from the edges towards the middle of the print. I suggest printing with a brim to help prevent excessive warping.
Key for outdoor water taps. Print instructions Licence: Creative Commons - Attribution - Share Alike Category: Tools
Component: 4x M3x15mm 1x M3x10mm 5x Brass Insert Nut Hot Melt M3 4,5mm compatible tool https://vi.aliexpress.com/item/1005006156284423.html?spm=a2g0o.order_list.order_list_main.41.511f1802aVhKKI&gatewayAdapt=glo2vnm
I prefer this kind of small and lightweight tap handle when cutting fine threads in small plastic parts. Much easier to tap correctly without loading the part with the weight of a traditional metal handle. I forgot to turn on the brim…
Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.
Print in the orientation from the .stl file. It is not a trivial task to get sharp points out of a 3D printer, so if yours come out a bit blunt you could use a nail file (or similar) to sharpen the teeth. Usage: stick it on your roll of…
edit 07/2024 : added STEP file for easier remixing. I designed this cute ElephCroc tape dispenser for a current design contest. Teeths are swappable - i recommend to print the teeth with stronger material (PETG, ABS, ASA etc.). Contains a…
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
This is a replacement roll for a Tesa tape dispenser. Tape roll inner diameter 26 mm / width 20 mm. Nominal axis diameter 4 mm / length 26.2 mm. The roll is assembled from 3 parts: 1 x roll, 2 x axis. Axle parts are tight press fitted…
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Dies ist eine einfache Halterung für alle Arten von Tapes. Für die Montage sind zwei Senklöcher mit einem Durchmesser von ø3.5mm vorgesehen.
I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Ce modèle est fait pour accrocher une caméra dans un angle de bâtiment. Pour accrocher le support de la caméra, j'ai utilisé des inserts M5 x 10 x 7. Les trous de fixation sont faits pour des vis M6.
Ein stapelbarer Wachteleihalter (12St.). Schnelle Druckzeit, keine Stützen und nur wenig Material nötig. A stackable quail egg holder (12). Fast print time, no supports and only little material needed. Verbesserungsvorschläge sind…
This is a quick remix of crijnsjan's Skadis Tape Holder to allow for the storage of large width tapes, up to 10cm. I'm currently using this to store Gorilla Waterproof Patch & Seal Tape which is comes in 10cm wide rolls. Fusion design…
This tape dispenser is designed for a maximum width of tape rolls of 20mm. The inner diameter of the roll should ideally be about 26mm to keep the roll from coming off on its own and to still allow for easy installation of the tape roll…
A better tap for the Smoby rainwater tank. The original tap breaks of very easy (mine did). My design uses a more rigid knob. I only designed the inner part, you can remove the original inner part very easily: After you unwind the tree…
Tape cutting sleeve for 50mm (2") wide tape rolls. Read reviews of PLA only versions that didn't do a good job a cutting the tape, so designed one with a serrated blade. Material : PLA Layer height : 0.20mm Supports : No * *Printed mine…
Da die originalen Wasserhähne der Kanister teilweise undicht waren und das Wasser über einen längeren Zeitraum gespeichert werden muss, habe ich mich entschlossen, einen von Thingiverse heruntergeladenen Druck zu modifizieren:…
Compatible with both M2 and M2,5 hand taps with square DIN 10 end shanks, approx 2mm.
Die Schalen wurden passend für die Ikea Alex Schubladen erstellt und das sie kompatibel mit dem sliding-tray sind https://www.printables.com/de/model/886260-sliding-tray-for-ikea-alex-drawer
the TPU feet are optional and can be glued in. the design also has a recesses for the speaker and Uses M3x5 screws to be put together also included is the hole pattern DXF and the STEP file produced form fusion 360
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Just a simple box which can be stacked. Ideal for pens or small tools. Printed on a Prusa Mini. Simple Box die stapelbar ist. Ideal für Stifte oder kleines Werkzeug.
Since our little ones found out how to use our garden water tap, we needed to hide the original square key. Because it's quite inconvenient to store it in the house and we wanted to have it at hand when we quickly need it, I made this…
This model inspired by the beautiful Black + Blum One Handed Tape Dispenser (which is sadly no longer for sale as far as I can tell). This was quite challenging to recreate from the few reference photos I was able to find online, but I…
The core for my standard 3M tape dispenser broke, so I figured I'd create my own replacement. Turns out it's a common enough problem that these things are sold on Amazon… go figure. =) Will need support during printing given it's design,…
Keep your washi tape organized at your desk and on the go! FEATURES designed for washi tape rolls with 25mm diameter fits 4 rolls of 16mm width washi tape screw-on lid for compartment to keep small accessories -- great for additional…
Holder for the IKEA SKADIS wall system. Fits in the orinal holes. One holder is for one bin You can place it free on the skadis board
Ein Werkzeug welches ich Täglich in meinem Unternehmen verwende. Z-Höhe sollte 7mm betragen, um ordentliche schnitte setzen zu können. A tool that I use daily in my company. Z-height should be 7mm to be able to make proper cuts.
Dino ROAR! Dino eat tape! A dinosaur shaped tape dispenser for standard rolls of Scotch brand magic tape (¾ inch or 19mm). Printing; All parts were printed using a 0.4 nozzle. There isn't anything complicated here so I'm sure other…
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Simple and stylized model to hold a mask. Printing instructions Printed in PLA, you can print it in PETG OR ABS too I recommend printing at 0.2mm and the infill will depend on how strongly the item will be held or treated, but 20% infill…
Height: 20 mm 6 bays for standing: 16.5 x 4 - 28.2 x 2 6 bays for laying: 16.5 x 4 - 28.2 x 2 5 bays for standing: 16.4 x 3, 22.4 x 1, 28,4 x 1 6 bays for laying: 16.4 x 3, 22.4 x 1, 28.4 x 2 Which tape size fits which bay: 16.4: 6 mm, 9…
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
I made this model because I couldn't find andy clamp style mounts for my C200 IP Cam, in the hope that it wouldn't wobble as much as a top/wall mount. The only things I could find were wallmounts or smaller clamps for the c100, so I tried…
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
![Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]](https://media.printables.com/media/prints/455919/images/3780277_097a7147-9ad7-4712-9ca0-bcdb72af705a/img_20230423_122418783.jpg)
