2535 modeli
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
Wydruk około 5,14 €–6,29 € nettoWstępna wycena jednego wariantu
Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Da ich keine passenden Muttern für die Gewindestange (für eine DIY FilamentBox) hatte, hab ich mal kurz selbst welche entworfen. Am Anfang gehen die Muttern etwas schwerfällig aber wenn sie einmal drauf sind, kann man sie gut drehen. Ich…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
NEU: 10.06.2024: Die Dokumentation Issue 1 ist fertig. Auch als als zweisprachige formatierte offline PDF Dokumentation (WORD basiert) zum Downloaden This documentation is available for download here as bilingual formatted offline PDF…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Klíč k napínání strun při jejich výměně. Makes the job of changing strings easy. I added a little glue to make it strong
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Edit (2025-10-14): All models have been re-uploaded in their proper print orientations as V2. _________________________________________________________________________________________________________________________________ This is not a…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
This versatile antenna winder is ideal for a variety of uses, such as guy lines, counterpoise wires, antenna wires, or even the whole antenna by adding a BNC connector to one of the accessory holes. The winder is a staple in my amateur…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom filament spool holder for Artillery Sidewinder X1, perfect fit with existing ball bearings.
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
With this spool winder you can quickly wind your cords on a spool. Included are a spool and a bit, which are joined together and then connected to a cordless screwdriver. The use of the spool winder is shown in the following video: The…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is a remix of the spring used in VincentGroenhuis' awesome Universal Auto-Rewind Spool Holder. I use 5 of these on my Prusa i3 mk3s MMU2.0 setup as a replacement for the prusa fiber buffer. They reliably rewind fiber onto the spools…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein druckbarer Gabelkopf für kleine RC-Modelle. Möglich wird dieser Druck durch die neuen Organischen Stützstrukturen ab Prusa Slicer 2.6. Wichtig ist, dass er in der skizzierten Lage (Bilder, Code) ausgedruckt wird. PETG ist als Filment…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an old design I no longer recommend. Instead I suggest this design . Why is it discontinued? Here are the main problems with rewinders of any kind: Very difficult to tune to keep working A new spool is heavier and requires more…
Wydruk około 9,70 €–11,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reduzierstück für eine Klimaanlage/Abluftschlauch von 150er Abluft auf 125er Flansch -kann aufgeschraubt werden -Meine Klimaanlage ist von COSTWAY ……gedruckt mit PLA im Quality Mode….. ……Organische Stützen…..
Wydruk około 14,87 €–18,18 € nettoWstępna wycena jednego wariantu
This is a remix between three different styles of Spool Auto Rewinders. There are multiple options for the side brackets depending on your needs/preference. Changes: Updated Shana 's sidebracket.stl to support the slightly larger axle in…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This takes the design of the K6ARK winders (which in my opinion are the best antenna wires that exist) and turns it into an X shape for use with antennas with a female BNC connectors. I made them to support my line of End fed antennas…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was designed to work with this winder: I use the yarn winder in the highest cone position and fix it with a small tap. The other cones I used before were a little bit too small for this winder and had trouble to fit 100g of yarn.…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Here's some Star Wars day fun. Add a little style with a Millenium Falcon inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out the X-Wing Style Rack Stand too! Bill of Materials…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added a modifier to make the top see-thru. Adds no functionality, but it's more fun to look at.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Contenedor para apilar los Portable Cable Organizer / Winder de @squinn . Añado el archivo de proyecto de fusion360 por si se quiere modificar, solo he hecho un modelo para almacenar 2 uds.…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This version of the top plate increases the space to pass swatches in the top plate and moves the position of the top open yarn hole. The old position caused the yarn to get hooked onto the wheel screws if the tension was a little lower.…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Here's some Star Wars day fun. Add a little style with an X-Wing inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out our Millenium Falcon version of this stand too! Bill of…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the next revision of the K6ARK antenna winder for the female BNC connector version. Adam showed off his new design in a livestream and I used that to create this version. This was designed using the FreeCAD Link Stage Branch. I…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
Adam, K6ARK has designed an ultra-compact matching unit kit for portable Ham radio operation. One of his winder design ( https://www.thingiverse.com/thing:5385215 ) integrates a clip for a Male BNC connector. Seeing that, I designed an…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Print the complete kit, including the box, Hinge together with some filament. You can also just print the crank or the handle with a winding tool. Your choice as usual. NEW! Print-in-place Box
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
A weak spot of the original model is the window holding the spring end, whose borders may break if the spring is under high tension. In this remix I increased the wall thickness at these places by slightly reducing the window size. It…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
The Zwinder stand, crossmembers, and axel are remixes of several parts towards accomdating an MMU filament spool rewind assembly. This combination allows for a better fit within the Repkord RepBox2. Print in PETG or PLA, at .20 layer…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was created to add to my Clock 45 from Brian Law's Wooden Clocks. It needed a winder so here you go. The square key hole on the winder is 4.6mm wide and 11.75mm deep. Total print time is about 2:30 Filament: PLA A raft is recommended…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
DE: Durchmesser Loch: 55mm für UV Schutz in PETG oder ASA drucken EN: hole diameter: 55mm Print in UV resistance material like PETG or ASA
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cover plate for belt winders (roller shutter). The screw distance is 136mm. Print a new one when the original has got a bad color change due to sunlight. The available colors dont fit, print it yourself in your desired color.…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
A tool to make loading your RepWinders , with a pretensioned rewind spring, into your RepBox much easier. Pretensioning your RepWinder rewind spring/axle before placing it in your RepBox allows the filament spool to retract/rewind right…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dadurch, dass ich auf beiden Seiten eine QS Kupplung habe, kann ich sowohl den Drucker im Gehäuse schnell lösen, als auch die Materialien von meiner Filamentbox schnell anschließen. Ich habe folgende Druckeinstellungen gewählt um die…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Only base was changed to size of prusa mini bed. R2 and R3 from original model. Both file and Fusion 360 file can be downloaded from file page.
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
English: I've always wondered why the spool winders are always so big. I don't have that much space. So I thought about the following: I already have a spool holder for the printer. What I need is a holder to be able to wind a spool. It…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
Hi this is a webbing reel to speed up your roll ups. I got the idea for the design from the image above. A drill is needed or alternatively you can design a simple handle to fit the 6mm hex shaft. The shaft and the main body is designed…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Engish below Deutsch: Ich habe eine Desinfektionsmittelflasche auf der ich einem größeren Sprühkopf montiert habe, Mein original Gewindeadapter ist aber leider nach und nach gebrochen. Natürlich wäre es wahrscheinlich einfacher eine neue…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ive been staring at my Zomei Q11 tripod for almost a year and currently am recovering from a car accident so have lots of time just sitting. So i decided to tackle this project. And it turned out near perfect on my first try. I had to…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a very simple (and almost undoubtedly overbuilt) tool for aligning the geared springs included in many filament auto-rewind systems. The measurements and sizing for the tool were explicitly based on this model but are likely to…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for…
Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated. Spools should be a minimum of 30mm wide with an axle…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “STAND” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY…
Based on the experience with my previous remixed Advanced Stackable Print-in-Place USB Cable Winder , I found out central winding not to be optimal when it comes to thicker cables, especially modern high-quality USB-C cables. Thus, here…
This is a redesign of the famous Print-in-place Stackable Cable Winder . The original design has a weak spot: The walls of the core are rather thin and tend to break easily. This redesign has a different core with thicker walls, better…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
This is a Remix “Winder Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 BEFORE STARTING THE PROJECT, YOU SHOULD CALIBRATE THE PRINTER AND FILAMENT AND PRINT THE…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…
This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
Stackable Cable/Cord Winder Organizer These stackable cable organizers let you wind up your phone and device cables easily for storage or portability. Coming in at multiple sizes depending on the cable thickness and length you have. Keep…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Wanting to use different sources for filament, often with cardboard spools (or refills) I decided early on that I needed a filament rewinder. Not fully satisfied with existing offerings, I made my own. I didn’t want to power it by hand or…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Update 2023-01-13: Addition of Hexa, Triangles, Circles, Plain patterns in addition to the original Voronoi Slight redesign of the overall assembly to limit the friction Other versions Regular charging cable : Same patterns, but for…
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…
This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…
I created this remix because I have a lot of old spools that are relatively narrow (Wanhao maybe?) . Some are 48mm and some are 50mmm wide and I wanted to use the winder for them as well. While I was editing the parts I also modified the…
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
