Liczymy pasujące modele…
Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…
Beefy Fortnite Pete Riding A Surf Board.
We held a friendly office competition that we began to refer to as "Sharkvivor". After looking around for a bit and stumbling upon the Beefy Shark ( https://www.thingiverse.com/thing:229538 ) model, I knew what I had to do; scale it up,…
Kept breaking the legs on the original model, this one is reinforced and child-proof.
beefygrip.com Purchase a high quality ABS print (with felt lining installed!) from me, the designer to support this project. (US and International shipping!) This is comfy contoured console style grip for the Analogue Pocket handheld. It…
Print with 0 top and bottom layers, 4 perimeters. I think 25% honeycomb infill was overkill, will likely look better at ~10-15% PLA is fine, (snug) supports required This is remixed from: https://www.thingiverse.com/thing:5207720…
Here is a design for a larger sized dab tool holder. This one wont tip over so easily.
Ever wanted a bath-time buddy that could beat up the biggest guy in the prison yard? now you can with the beefy duck! easy print, enable supports (with approx. 20' overhang threshold) (very easy to remove) Do post your makes to the "I…
I saw this cool body cap that Codiac2600 made for their Sony Alpha camera. Sadly this camera has an E-mount and the Minolta Alpha 9 I just got uses the slightly larger A-mount. Since the model was modular I decided to take the actual…
Added some parts with contours and extra features. 6x - M3 x 20mm CS
This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…
Simple but strong center finder 75 and 150 mm maximum width Also cool-looking First layer may be difficult to print, so uploaded an easier version with smaller chamfers for greater bed adhesion.
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…
BEEFY DIN RAIL MOUNTS These are Completely Overbuilt! They Require 1 purchased part - Link Below I made these mounts to solve the below issues from the Voron 2.4 r1. BOM STL files Will work on any 35mm Din Rail Mounted Setup These are…
Big & beefy laptop stand that has the same height as my screen. Print without top & bottom layers and honeycomb infill to get the result from the pictures. I used 18% infill and 0.6mm width
🐱💪 Beefy Cat - The Swole Feline You Didn’t Know You Needed Move over housecats — Beefy Cat is here to flex his way into your heart and your display shelf. This unapologetically muscular kitty is the ultimate mix of cute and comically…
A re-doing of the idea by ebrown54 ( https://www.thingiverse.com/thing:2882312 ) making the cap a little bigger and more robust. Overall, a cap is a big improvement in the comfort of using the stakes, totally worth it. I use (and…
This encases the entire bottom and side of the Raspberry Pi 4 board with an opening on the bottom for easy removal of the microSD card. Utilizes two low profile DIN rail mounting brackets for a sturdier and secure installation of the Pi 4…
We present the first anatomically correct Muscle Marvins with Beefy Arms! The BIG versions are at 150% scale and they print better. Use support for all models. Print instructions Category: Sculptures Print Settings Printer Brand: LulzBot…
One of the first things I created when I got my AnkerMake M5C was the HexScraper. I liked how thick it was, but its plastic edge did not hold up. I found the orange plastic blades and printed the Plastic Scraper Blade Hex Holder, but it…
The lever arm is longer, providing additional leverage The lever's width is wider, providing more material around the fulcrum (a weaker part of the original design) After about 1000 cuts it would break. Widened holes on lever for screw at…
Print twice and you'll need M3x10mm screws to replace the original screws on the sides of the unit.
Widened the opening to fit a larger light bulb/socket.
Remixed the original author's step files in Fusion adding Sony Alpha logos for multicolor printing. The original versions required printing two separate objects and gluing together, this way they are merged as a single object with…
I didn't like any of the options I could find online, so I drew up my own side rails for the TYT TH-9800. The radio is centered, and the rails extend far enough in the back to protect your antenna connection. Works great on a desk,…
A remix of "The Gridfinity USB charger stand" for bigger chargers and 1x2 gridfinity squares
These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…
R2 is a much more solid and beefier and rigid version of zaribo geared extruder body in a tradeoff 16g extra weight (if printed from ASA) still superlight but no flexing, everything else is the same, see bellow official guide…
Here This is based off the latest 0.4 Beefy lulzbot Idler variant (which compared to 1.4c is basically 2.0 anyways), licensing is Creative Commons Open Source Attribution as usual. Please feel free to use this part in any manner you see…
I expected this model would already exist, but couldn't find it. I needed a funny model for Thanksgiving. I take no credit for the turkey model or the arms from Meshmixer. Category: Animals
Bugsy doesn’t do “what’s up, doc?” anymore. Now he just grunts and swings a bat. He chews Marlboro and stares down pit bulls without blinking. He got kicked out of PetSmart for "intimidating the hamsters." We tried giving him a plush toy…
Heads-up: I kept tolerances quite low, so no guarantees that this will fit your machine. Pause at the beginning of layer 12 to insert magnets, or use the ‘no_magnets’ version with double sided tape. I inserted 20 magnets, which is a bit…
Brace Details: The braces are designed to support the corners of the concrete paver embedded into a Lack table. The screw holes on the braces are positioned strategically to ensure they thread into the structural areas of the table legs.…
More of a taller and heavy duty version of the lack enclosure. Features adjustable bearing mounted barrel hinges for easy door removal along with magnetic latches, integrated filament mount, side walls are attached with magnets for easy…
This are beefy door hinges to attach a 2020 doomcube style fridge door. This is an improvement on my first design where I borrowed heavily from WhoppingPochards clicky clacky door hinges. It is designed to use the following hardware based…
I suggest this combo: -Screw Clamp.stl (Hex or not, your choice) -Insert1mm8.5mm.stl -Clamp Nut3.5mm.stl (Hex or not, your choice) (The original was "Insert1mm8.2mm"-"Clamp Nut1.5mm") STEP OR SOLIDWORKS FILES:…
This is a two piece desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket. This STL is released as free for non-commercial purposes. If you would like to purchase a high quality ABS print of this thing…
Printed body at 60% triangle pattern, carrier at 100%, .3mm layers with .6mm nozzle Hardware: 8x 30mm M5 BHCS for bodies 8x 45-50mm M5 SHCS/BHCS for carriers 4x 20mm pins 4x 9mm gt2 pulleys 8x 0.8mm-1.0mm M5 washers pullies should spin…
Printed at 100mm tall, customized for the business office! Print instructions Category: Sculptures
The standard Daylight mounts dont work with Clee's Beefy Z Idlers. (BZI) so I made up a quick replacement.
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Chee's Beefy Front Idlers , carrier part for Voron Trident, version for M5x16 screw instead of 5mm pin -- remixed to fit the slightly larger head of button head cap screws (BHCS) currently provided in LDO kits.
The width of the part allows you to butt it right up against the wall to get the right distance It has been beefed up for 3D printing and it has a cutout to allow the spools to get very close to the wall to not waste space
Strong Groot wishing you good health! Print instructions Category: Sculptures
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's…
This is a simple jig used to cut the 5mm rod required for the pins mod found here: GitHub - clee/VoronBFI: Beefy Front Idlers (for Vorons) This jig will produce: -22mm (4 required)
I was having issues with the original Tanq-S mount for the 04 stock antennas being too thing and ripping. So I made a beefy version of it! Still works with the ELRS antenna mount as well as the 04 air unit mount ( which I also remixed to…
Loved the original model but needed some more space to use the Daylight on a stick-Mod too. So I removed one “ear”. The file contains a full set of 4 pieces. Nothing special but maybe someone need that extra space too.
After trying to print the draw latch that was put out/modified by Matereo , I decided to design my own using Matereo's design as inspiration. I wanted something that I could use M4 hardware to assemble, and standard drywall screws to hold…
Aftey a year my mount snapped so I decided to make a beefier version that is 1 mm larger on the 3 sides.
I used https://www.printables.com/model/140094-monster-tail-rainbow-loom as an inspiration This remix just has stronger thicker loom pins, as my kids kept breaking them Printed at .16mm layer height with a .4mm nozzle and .6mm line width…
This is a quick and dirty remix that will work for a dell 710/720/730 server that mounts it horizontally to the wall
Customized version of http://www.thingiverse.com/thing:1063761 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1063761 Instructions Using the following options: baseWidth = 90 line_2 = of the year! line_1…
This is a beefed up version of the Stealthburner toolhead rear for Crazy Dragon (UHF mini), with a Tap compatible version (untested). The Crazy Dragon (UHF mini) printhead of eamars works great, but the printhead for the SF/HF Dragon is…
More robust version of the standard bedstop to avoid long-term deformation, compatible with LDO kit bed spacers
Printed PLA, 60 mms, 6 walls, 6 top and bottom, printed with Beefy name down.
Do you have that kind of friend who asks you for a headphone hanger and calls you week later to tell you he brake it? Well now you can gift him a one that is basically on steroids There is two models one has a tolerance of .1mm for the…
This is a rebuild of my original Quarter Pounder ( https://www.thingiverse.com/thing:4830422 ). I found that the handle was a little wimpy and would break off the head. This is a stronger (extra beefy) version. The head can be filled with…
Modified version of the DragonBrick cowl . I slightly increased the wall thickness around the screws that hold the printhead in the dock for MadMax Toolchanger The overall geometry and compatibility with the original design are unchanged.…
This is a mod for the Ender 3 Pro (and probably also V2) to improve Y axis performance using: 9mm GT2 belt Longer stepper – up to 60mm Double-shear bearing to support the stepper motor shaft (optional) BOM and assembly notes: 16T GT2…
Just a small and a more beefy version of an S Hook that can be used for many things.
I also did a little bit of a interference analysis and rounded a few corners that might have been a bit of a stress. printed in asa 0.1 layer height
This remix allows the user to have even more clearance in the Z direction, you will gain anywhere from 10-20 mm of Z height due to conflicting geometry being moved out of the way. To combat flex some areas have been beefed up even more.…
I didn't feel like the vase mode print of the spacer for the RackStand was sturdy enough so I drew up a simple spacer that prints flat on the bed. The STL is for the 100mm arbor on the original model, but I've attached the f3d file to set…
Uses an extruder spring, i didnt have any filametrix springs and i haad heaps of these, so i modified the files to adopt.
Will require slightly longer than stock screws. This piece is not a replacement for properly setting your steering endpoints, a common cause of this piece breaking. i Printed it using the 3dsets settings with supports as its sits in the…
Super Beefy Rhino Arms for http://www.thingiverse.com/thing:761744 Category: Animals
A simple yet effective solution for anyone who has lost or wants an upgraded version of the classic game pieces. These pickup sticks are designed to be more substantial than the flimsy modern ones, offering a better feel and improved game…
Yeah... Lady Liberty works out. This is my original design. It is not reuploaded from another website; however, is was originally posted to Thingiverse: https://www.thingiverse.com/thing:219006
These are replacement front idlers carriers for BFI 2.4. Check both to see which has the better fit Two Files: BFI-carrier-big-x2: Increases all the head screw dimensions by .5mm bfi-carrier-head-height-.4mm-higher: Increases only the…
I had the original motor mount break after a few years of use. So I made a stronger motor mount. I use a37D eccentric Motor and a Sonic hub with a 6mm D shaft. I used M4 headsets and bolts. NOTE: You may need to mirror this parts…
The original's original was aimed wrong, and @Mark579 make it the correct angle. I used it for several months, and LOVED it. But, because I'm stupid and made it out of PLA instead of something more moisture resistant like PETG or ABS, the…
I thought I'd take one of my all time favorite demo prints and throw a big beefy arm on it. This is also the first model I've "designed" (I'm using that term loosely) and uploaded during a flight. The future is awesome. I attempted to…
A beefier version of idler holder for V400. See original model for more details
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
Print it using supports from bed. And you will need two extra screws and two T-slot nuts. In my picture it shows two unused holes on top, I figured out they are too close to the other ones on the same corner. So I covered them but I could…
This is a very simple, in line, Robot Arm extenders that fit onto the RobotGeek's V.2 Robotic Arm for the 2017 division C Science Olympiad. It should be fully rules complaint but check dimensions before using this design. The BeefyArm…
I found that the existing clip was too thin to grid the gantry plat well when installed, so I widened it in the X plane to give more material for grip, and to sit up closer to the gantry plate for a better hold Post-Printing Category: 3D…
Customized version of http://www.thingiverse.com/thing:1063761 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1063761 Instructions Using the following options: fontSize_2 = 6 fontSize_1 = 8 baseWidth =…
Literally added some extra mass so it would benefit more from extra walls with some more exotic material like PPA-CF. I noticed the original design still flopped around a bit even when printed from PC-PBT-GF20, but this one seems visibly…
Beefy replacement foot for my stepladder. I think It's quite a bit better than the original which was an extremely cheap and thin plastic cap which eventually just wore out. This foot has a 1-inch wide opening, but you could probably…
A reinforced Milan Coupler for the threaded rod Caliburn and TalonClaw. This is not as good as getting an AluMilan kit from Slug, but it is better than the default printed Milan Coupler. I recommend you print this at high infill…
My friend was looking for a gag to add to a add-and-pass trophy and asked about 3D printing something for it. I showed him the Beefy-Arms on Venus, bunnies and sharks. He countered with Alexander the Great. Now I can't see the sculpture…
I had troubles with original beefy depresor mount for Filamatrix https://github.com/IRTrail/G2E-Filametrix/tree/main/Beefy%20Depressor as it wasnt as beefy, so I beefed it up a bit more.
Beefy laptop stand I made for my engineering laptop at work. You will need to print 4 parts total: x2 Laptop_Stand_1, x2 Laptop_Stand_2 This was designed to fit a large Dell laptop, but since the two stands/clamps are separate you can…
A better power supply so Klipper would stop complaining about throttling. Print both parts with the flat face down and enable supports on buildplate only so the two screw holes can print without issue. Any filament material should work.…
Pretty solid the more perimeters that are used. Size limited by my Prusa Mini. I printed with ASA, but use whatever filament you like although TPU might not be ideal.
This is another modified Idler arm and latch for Lulzbot Mini, 2, Taz 5 printers. This is designed so you could open and close the idler with one hand. This incorporates the new beefy idler Arm & Latch. I use this so I can quickly hot…
The original Xol-Metrix easybladeswitch snapped on me after about two hundred filament swaps. This remixed arm has been thickened for strength. The arm should be printed solid for greater strength.
BOM (untested buy at your own risk ! (but it should work i'm the best cad'der in the world (false) )) : (2x) M3x12mm metal pins. that's it then figure out the bearing and shims yourself duh…
I had lost a couple of the dinky clear-plastic pegs, for holding the shelves on a few small cheap-particleboard shelving units, and a big bookshelf I own, So I took it as an opportunity to make bigger/sturdier ones to print and use…
I don't really have an excuse for this other than that I kept looking at other HSW to Gridfinity designs and they were optimized for printing and not for strength so instead of putting the Gridfinity base at the bottom of the mounting…
Beefy INDX Core One Toolhead Carriage Why does this exist? Why not? While doing some work on my pre-assembled Core One w/ Bondtech INDX, I noted how little material there was around the upper screw holes for the toolhead. Then while…
I beefed up the MK6 Spooler Back for a project i am working on. Added more supports to the main spool hub. This isn't needed for a standard MK6 Recreator3d.
Remixed to my selfsourced Voron Trident with 4020 profiles.
Umbilical holder on back beam of Voron 2.4 gantry. PUG and steel wire compatible
Original made by Rob Mitshi was for E3Dv5 Category: 3D Printer Accessories
Needed a knob for my 3d printer cabinet. Sized to fit a 4mm diameter screw. Prints quickly and is robust.
![[RobotGeek V.2] BeefyArm - Robot Arm Mod (2017 Science Olympiad)](https://media.printables.com/media/prints/219412/images/1998845_8d9dcac3-700a-4640-94c3-ad54b9e58640/d98898f287af5f5cf4b9cd00b4ad35d4_display_large_21.jpg)
