Liczymy pasujące modele…
Case for a DPS5005 (or other variant) power supply module with power button, 4mm banana jacks and DC barrel jack input. Unfortunately the closing mechanism was somewhat of an afterthought and therefore requires 4 of the hooks to be…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…
This is a type-c powered ''lab bench power supply'' if I can call it that. It uses the following components: RD DPS5020 Constant Voltage current DC DC Step-down Mounted with heat-set inserts and m3 screws 1PCS/5PCS/10PCS USB-C PD Trigger…
This is a type-c powered ''lab bench power supply'' if I can call it that. It uses the following components: RD DPS5020 Constant Voltage current DC DC Step-down Mounted with heat-set inserts and m3 screws 1PCS/5PCS/10PCS USB-C PD Trigger…
other modifications……. https://note.com/newspeak/n/na6e293d8471e
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
Einfaches und schnell druckbares Gehäuse für das DPS 5005 auf Basis des Modells von zsoltm. BOM: 1 pcs DPS 5005 4 pcs 3x8mm selbstfurchende Gewindeschrauben 4 pcs Bananenbuchse 4mm
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
I designed a simple transport case for a FNIRSI DPS-150 mobile power supply. I wanted to protect it from scratches when i transport it in my bag. On the back side i left a bit space to the wall of the case because i use a magnetic USB…
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
A housing for two HP-DPS 1200FB power supply units. The enclosure was designed so that two voltmeters / ammeters have space and the whole thing can be mounted under a table, for example. In the top part there is also space for four 4mm…
DPS Lumbar Support Replacement Part ===================================== April 23, 2025 - Version 2 is now available! Adjustments were made to the original model based on user suggestions and comments, changes include: Changed dimensions…
Only a small cookie cutter I created for our scouts. If you like to, check out my other designs too!
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
Housing 270x120x120 mm for a programmable laboratory power supply. Built in: Switching power supply Meanwell RS-150-15, 199x98x38 mm Controller DPS3012 (others will probably also fit) Axial fan 40x40x10 24 V Power switch Laboratory…
DIN rail mount case for DPS/RK power supply or WEL electronic load modules. Uses 12mm openings for button, safety 4mm lab sockets and power input (e.g. my panel mount USB-C PD trigger holder ) The back attaches via M3x8 counter sink…
TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…
Customized version of https://www.thingiverse.com/thing:266400 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=266400 Instructions Using the following options: focus = 1000 aperture = 200 outer_Diameter…
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
The HP DPS-1200FB power supply is quite heavy, so it makes a good base for an electronics prototype jig. The rest of the prototype is built up around a vertical 2020 rail. BOM Only if printing the magnet varient, 4x 30x10x2mm magnets dab…
I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…
Сompact сase for DPS module 5005 or 3606 includes AC-DC power supply, DPS modul and 3 types of output interface XT-60, DC 5.5-2.5, DC-jack. Model containing maine body and cover For assy need: Screw M3*6 x4 Insert's M3 x4 DC 5.5-2.5…
3D tištěná PCBite sonda na DPS / 3D printed PCBite testing probe for PCB English version below 3D tištěná sonda s pogo piny kompatibilní s PCBite (SP10). Navrhl jsem 3D tištěnou sondu kompatibilní s PCBite flexibilním ramenem. Co je…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
Case for FNIRSI® DPS-150 Programmable Mini Portable DC Power Supply. Buttom and top is clipped with 8x Ø 6mm x 3mm magnets together. The power supply can be used to store DPS-150 and all necessary cables. During operation, the DPS-150 can…
Designed this keychain hope you enjoy i added also the Inventor file (iges) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: ka PLA Category: 3D Printing
Power supply housing should also fit DPS5005 DPS5015 DPS5020 SK120 SK60. Printed with Prusament PETG Orange. Organic supports for front panel outlet only. The feet needed to be printed 4 times and are glued to the bottom part. Additional…
Lost my original sag indicator so decided to make a new one from recalling what it looked like. Mounts onto Fox DPS/DPX2 with zip tie and allows you to measure the shock sag. I've place 1mm marks from 5mm to 18mm with heavier marks at…
A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…
Simple gridfinity tray to store your FNIRSI DPS-150 DC power supply. The power supply fits snuggly halfway down in the tray and can be lifted up with no problems. You can store the alligator clips and other accessiories in another box,…
Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.
Cookie cutter for the logo "DPSG Lilie" at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Cookie cutter for the logo of the "Biber" (a beaver) at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Cookie cutter for the logo of the "Pfadis" (a palm) at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
Cookie cutter for the logo of the "Wölflinge" at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: PLA
other modifications……. https://note.com/newspeak/n/na6e293d8471e
I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
FR Boitier en quatre parties pour une alimentation de serveur : HP HSTNS-PD41 DPS-800AB-11 A 723600-001 un bloc troué pour un poser un interrupteur, un bloc qui s'emboite dans le premier pour stabiliser et servir de pied un bloc a…
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
Seven revisions and two stupid mistakes later... This is a semi-open hardcase for the Fnirsi DPS-150 power supply. The PSU be used in one position, or turned around in order to protect the screen. (I am using a custom glass screen…
PLA, 0.4mm nozzle, 0.2mm layer height 3 walls, 3 top and bottom layers. 10-20% infill, gyroid infill is the go to for my gridfinity organizers.
Made school id card holder for my kid. Shared the freeCAD file too, which can be modified according to your needs. Print it in PETG with 6-8 percent infill for the flexibility.
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
Source code - makerville-mini-racks/makerville-mini-racks.scad at main · Makerville/makerville-mini-racks My rack had some things on the side so the mounting is off-center. You can edit the openscad file above to make it more centered.
This model allows you to mount a Fnirsi DPS-150 to your IKEA SKÅDIS board, using the T-Clip System by @LineArcLine . To create this, I also made use of the Skadis T-Clip negative hole by @capze_178225 . You will need to print two of the…
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
This is a dps5005 based power supply with integrated 36v 3A Delta power brick and a 30mm fan. It probably does not fit for you but i include a fusion360 project file. Usb connection is also supported and the cooling is good enough for…
An adapter insert to adapt the 38mm mount to a 30mm pipe. Use outdoor rated material like ASA with 4 walls
Handle for a psu of a HP proliant DL 370 G6 server Category: Other
Vertical mount for the HP Server DPS Power Supplies Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament PETG Category: Other
Tisk - Ender 3 Teplota tisku - 205°C Bed - 50°C Vrstva - 0,3mm Modul LCD DPS3012 - odstranil jsem postranní packy pro zacvaknutí a díra v předním panelu je na modul bez nich. LCD jsem lepil a to samé je u vypínače taktéž v předním panelu.…
Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
I have unused 24v power supply laying around so I've made case for it so it can act as “lab” (big quotes here) power supply it uses DPS3005 dc dc module (or any with same form factor) and some other parts like power cord: 1x AC-17 250V…
Überabeitung des Gehäuse von zsoltm (ein großes Dankeschön an dieser Stelle) um mit den mir zur Verfügung stehenden Teilen arbeiten zu können. BOM (Vorschlag): 1 pcs DPS5020 1 pcs USB PCB 4 pcs M3x8mm Linsenkopfschrauben (Verschraubung…
Einfaches und schnell druckbares Gehäuse für das DPS 5005 auf Basis des Modells von zsoltm. BOM: 1 pcs DPS 5005 4 pcs 3x8mm selbstfurchende Gewindeschrauben 4 pcs Bananenbuchse 4mm
Case for the DPS3003 and USB-C PCB from China Category: Electronics
This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
A case for the Fnirsi DPS-150 PD power supply. With cable management. There are two versions of top cover—1 material or 2 material, where you can use TPU to make a soft cushion to avoid scratching the display screen. Instructions for…
I'm currently building a case that contains the PSUs and control boards and stuff to power up two 3D printers @24V. This is the stand to mount two 12V HP Power Supply units onto it so that we get a 24V 47A PSU. The stand is designed to…
I designed a simple transport case for a FNIRSI DPS-150 mobile power supply. I wanted to protect it from scratches when i transport it in my bag. On the back side i left a bit space to the wall of the case because i use a magnetic USB…
Case for the DPS5015 Power Supply Board and Display. DC Plug and USB-C board in the back for two different options of powering everything with a threeway switch to choose and turn on/off. There is enough Space for a two LM2596 Boards for…
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…
This is a remix of the popular Rugged Box (Parametric) , specifically adapted for storing and transporting the FNIRSI DPS-150 portable smart power supply. Key Modifications Custom Insert: Features a dedicated tray tailored to the exact…
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
Case for the DPS3005 programmable power supply. Created in OnShape.com - here's the source: https://cad.onshape.com/documents/a387dafa34ddb2b0b1734add/w/661b6e36556eeb673311f490/e/dcde09774cb5d0aa43c715d4 And here's the whole story:…
When Converting a DPS-1200FB power supply for hobby use, this cover will keep the 12 volt connections protected but still allowing ventilation of the unit. See the following article for how to do the conversion.…
I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…
This is a replacement handle for the back of a HP 1200w Server Switching Power Supply ( P/N438202-001). Freecad save included. Category: Computer
A case for the DPS5020 Power supply Module. It is designed so that you dont have to work precicely when removing the support. The screwholes for the lid are 2,5mm so M3 should work, however special plastic screws are better. For mounting…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
this is my work in progress wall mount for the pdpslim charging station for the PS4
This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.
Mounting Brackets for DPS-800GB_a PSU My PSU's have been Float Modded so they can be placed in Serie for 24V if needed. Due to this I have had to replace de screws that holds the board in the case with Nylon ones. I added some Cap Nuts to…
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
I designed this hex tile mural/puzzle to be community printed for Dayton 3D Printing Society (D3DPS) at the 2019 Make It Dayton Festival ( http://www.makeitdayton.org/ ). I used 3DMakerNoob's hex tile tutorial video to cut the tiles, and…
This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
This DPS30xx encoslure ist mountable to a desk or shelve and can be stacked on top on each other. I have utilized an Ender3 Stock PSU as an external power supply for tje DPS3005. I have printed PLA, rather fast with 0.6 nozzle; 0.18…
![[Updated] Costco DPS Chair Silicone Lumbar Support Replacement](https://media.printables.com/media/prints/01544801-02d9-419c-b485-22ec96633739/images/9577105_f75aedde-9e0b-40d4-9bea-eb2aeaa506a5_553758de-0120-4b01-a4f6-a43bbf2f3a26/screenshot-2025-04-23-010412.png)
