215 modeli
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
amp housing for one ZK-1001U amp, designed to use 2 m3 heat-set inserts for mounting. run wires through the bottom opening of the housing. Then complete the connections to the amp, and slide the amp into the case with pulling slack out of…
update nov 2023 Free my models 3434692caa8da9f19a those who are having trouble finding id size they use slicer measuring tool extenstion to scale the stl up or down as per there required pipe fittings i did same for mine my pvc pipe were…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
For my printer enclosure I needed something with screw holes so I added some. Also I designed a clamp for the PTFE tubes so they won't get sucked in. Just use a M3 10mm screw and a hex nut (there should be enough in the MMU2 spare parts…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
All printable parts to convert your existing Original Prusa MMU3 (for MK4S) to Original Prusa MMU3 Enclosed (for Core One). Before you start printing please read the instructions carefully! You need to source additional parts listed in…
This model is open source and available on OnShape, link here - I created it because I needed an enclosed TP dispenser, otherwise my menace of a cat would destroy all the TP rolls. All parts have a flat side that can be used to print…
An enclosed version of the fidget switch.
I really wanted to like the armor plates but the layer lines look terrible and it's hard to print without all sorts of issues. The pegboard plates look much nicer printed because the outer face has the bed texture and prints more easily…
Hi all, I've been looking for a solution for my K1 Max's top. Taking it off, putting it on, the bloody thing should have come with Hinges or something. Anyway long story short, I looked all over the internet and couldn't find anything…
This is a followup to: Lack Attack#3: Koppla the Lack: https://www.prusaprinters.org/prints/15919-lack-attack-3-koppla-the-lack-aka-power-the-lack-s without further adieu.... Attack 4: ENCLOSE THE LACK Its been a while since my last…
This model is not my design, I just added horizontal supports for more stable printing. As long as your printer can bridge you shouldn't need any vertical supports. I do not like the way the armor modplates look when printed, with the…
Used a old DVD drive to model this. Hold 8 2.5" by 7mm drives and fit in 1 5.25 drive bay
I really liked the toothpaste squeezer but found the body to be uncomfortable to hold and prone to cracking if squeezed too hard. This body is more enclosed, making it much stiffer and comfortable. It is also about 1mm taller for better…
This is a case designed for the Sofle RGB split keyboard. The case consists of 1 upper body part and one flat bottom plate, the plate should be cut with clear acrylic or similar to let the LED shine through. You'll need the following…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
A fully enclosed tenting case for Silakka54 split keyboard. Fit nicely around the USB port and the jack connector, has slim edges. Keyboard is press fitted and the electronics cover is screwed from the bottom. Left side file provided,…
So Yosuke's filament guid e is awesome, but his spool holder does not work with the stock Lack connectors (his are thinner wall). He also presumes you will use the Bear 2020 Spool Holder which, okay, but that means you're buying two…
These are the 3D printed parts for the adventure 5m DIY enclosers before printing make sure you bought the kit from amazon or other websites to get the class , screws, magnets, and other stuff.
ASSEMBLY: The shorter slides has to be on the outside. The longer one with the dot showing to the middle The rail has to be mounted in the cover while rotating it into the press fit. The big radius is the top. No screws or glue needed. In…
This model is a functional protective case for standard circular NFC tags (stickers or discs up to 25mm in diameter). The keychain is designed for embedding the tag during the 3D printing process, ensuring it is fully sealed, waterproof,…
This model is compatible with the lego system.
My Tarmo5 gearbox was filling up with dirt and grass so I tried to close up some of the openings. My first version vibrated enough to loosen the motor screws. So I added a bearing and at the suggestion of “Liouma”, I added a flexible…
Remix of the nice LTT Cable Management Clips. New: With enclosed NeoDym magnets. Thanks for this great design. Especially your aspect looks abslutely nice. I did not want to have the magnets exposed to run risk of falling out or messing…
Enclosed Z-Chain Guide Supports Z-Chain from both sides and keeps it from sliding around, especially for taller builds. Installation Requires: M5 x 10mm BHCS (Count 2) M5 x T-Nut (Count 2) Clearance: Clears conventional toolhead…
This model is compatible with the lego system.
I remixed this model in fusion to fit my Neptune 4 plus, I used some sound deadening foam for the walls but plan to use a different material in the future. The adjusted sizes should be labeled in each model stl file. I do apologize for…
Lid raiser for the Creality K1. Features: Has a Bubble for the Cable Chain to move into when printing on the left side of the build plate. Hinges so the lid can be opened for printing PLA etc. Handle for living the K1 Lid Extended right…
A modification of Gyoenastaader's useful spider cover with no hole over the spider collimation screws. Opening for the screws is about 34mm in diameter and extends up about 38mm before curving in. Printed with 0.4mm layer height with PLA…
Here's my design for a filament / PTFE tube cutter. It has been designed to be enclosed inorder to keep fingers away from the blade. There are two designs one with a window so that you can see any marks you have made to cut to and one…
Many models involving a GoPro mount use a screw embedded into a printed handle and then rely on a nut in the mount to screw in. Frank's Prusa Mk3s camera uses a different method which inspired this model here: embed a nut into the handle,…
SV08 Top Hat - Enclosed for MMU's ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel…
[Note : If you use OctoPrint, see special note below.] This print will create a knob with an embedded ¼" X 1" or M6 x 25mm hex bolt. Bolts of different length can be used with a simple modification explained below. This print is the…
Add a pause just before the roof of the Magnet enclosure top avoid gluing in the magnets.
With these parts you can close the Enclosed MMU3 top cover opening while allowing for easy removal of the MMU3 top cover. The sliding cover helps in controlling of the Core One enclosure temperature, but I also wanted to be able to easily…
Hi, have been working on a discrete power socket mount for the 100 v1.1. It has a fully enclosure in the rear and has a port to allow wires to run to the power supply. It is a 2 part construction that replaces the connector bar in the…
(This is under revision due to several issues a newer version is on the way ) A simple filament guild for the Snapmaker 2.0 also works with the enclosed Hardwear needed M4 x 8mm (2X) Print Settings Printer: Snapmaker 2.0 Rafts: Doesn't…
This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Enclosed version. Since the length of the…
Holder for use your (un)original drybox with you Core One with the MMU3 enclosed version. You still able to remove the lid. needed : 4 screws M3x8 4 screws M3x10 8 nuts M3
For 86x54x3mm card Printed with PETG 15-20%infill supports recommended the hinge was made with 0.2mm tolerance (it works with PLA too) To break free the piece use flat surface and bend up the part with the hexagon in it.
This mounting adapter allows clearance for the panels on enclosed Voron printers. It is a mashup of the “Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks” system and the mount used by the “Removable Doors” mod by…
This is a sleek window mount for the FasTrak Flex and Flex CAV with protruding passenger-count wheel. It is designed to work with (qty 3) 0.8" mini clear suction cups . Remove the velcro tape from your toll tag and then push the tag all…
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…
The main feature is that it's enclosed to reduce the noise leaking out from the big hole on the back where the poop comes out. It has a tray attached to the printer with two screws (M3x12mm) so the container can be over it without any…
A simple dust filter for the Core One top vent I made because I have a lot of dust around, lol. You can customize the hole size by simply changing the infill % or type on the “Filter” Part in the .3mf files (I use 64% to get a more or…
This is a modular electronics case for 3d printers which I have used successfully for my Eryone Thinker (located underneath) and on the side of a Ender 5+ The attached model files provide the outer wall and any bases required. In addition…
Modified Stealthburner toolhead board cover with 25x25x7mm enclosed fan and a place to mount the PCB for the 3DO Nozzle Camera.
Legs to mount the UltiMulti unit to the enclosed CoreONE. Mount using M3 screws.
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…
This is a 3D printable PSU cover for the Creality Ender-3 to also contains a Sonoff Basic R3 to command the power by WiFi. A good option is to flash the Sonoff to use Tasmota instead of the native software. Then you can shutdown the…
Note: Links to files and ongoing updates I'll eventually be uploading a 'finished' version of the files here to Thingiverse, but in the meantime please see my Github repository for parts files and models, and my build thread on the Duet…
Battery-less variants available for purchase at my shop if you're interested: https://bonzosretro.shop/products/3d-print-sanni-open-source-cart-reader?variant=45933636976918
The structure is made with 2020 aluminum profiles and polycarbonate panels , making it a cost-effective alternative to a typical four-slot filament dryer .
CrowPanel ESP32 2.8 Display Encloser Use M3x6mm for display Encloser Use M4x5mm for display holder with 2020 extrusion Firmware: https://github.com/MadRajib/CYD-Klipper-CrowPanel
Description This case is for Sweep Bling MX keyboard . Tested working for DSA and XDA keycap profile. BOM For the full build you'll need 8x M2: 6mm screws Building Instructions For the bottom part, you will need to print it bottom side…
While Forker45's Clip-On Tool Caddy for Ikea Lack Enclosure fits all of the original tool needs, it was still missing the one tool I use the most… a filament cutting tool. So I did a quick modification in tinkercad and here we are. The…
!Please read to the end! I'm continuing to work on upgrades for the printer. Updates will come if interest is there. There are two doors in the front to easily get to the Buildplate. The Top panel is removable with magnets [Printing Pla…
Want to keep your toolhead cooler than the chamber? use peltier cooling! now with 95% enclosed toolhead! Why are you here? why are you doing this? do you know what you're doing? what if your machine breaks? what if you start a fire? are…
This is the ducting adapter I used in my TwoTress TS3 Enclosed Laser Engraver video, it allows you to connect the stock 6mm ducting to another 120mm fan and 4" ducting to exhaust the smoke. Category: Parts
If you are not using the tps module, mirroring the left side should work fine. Same if you are using the tps module on the left side. Printed with the top of the case facing down the plate, supports for the tps cut and some of the holes…
The Coreboxx comes with a top panel that allows air to escape from the CoreOne. While this design works fine in general, it is not ideal for filaments that require a stable heated chamber (such as ABS, ASA, or Nylon). To solve this, I’ve…
Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.
Requirements: 80mm fan (designed for Noctua NF-A8 PWM ) JST GH 1.25mm 4pin male -> fan adapter (you will probably have to improve and create your own) 2x5.7mm M3 heat inserts (designed for CNC kitchen M3 x 5.7 , but deeper or shallower…
Update: works with Firmware Version 6.5.3, my impression is the autovent works a little smoother now. The testfile has to be renamed to .gcode and works for the CoreOne+ but is your own responsibility. The stock top cover of the enclosed…
Poop bucket for Qidi Q2 that is fully enclosed to reduce fumes when printing materials like ABS. it is not air tight (neither is the rest of the printer enclosure), but when used with the exhaust fan (and in my setup an in line booster…
remix of https://www.printables.com/model/920539-framework-laptop-expansion-card-hinged-case just enclosed the magnets
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.
* PRINT WITH PETG* This mount securely holds the FiTech handheld controller right on top of the steering column, giving you a convenient viewing position for monitoring your engine while driving. It uses four M4 screws and two M4 nuts…
SV08 Max Top Hat - Enclosed for MMU's ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…
SUAFT: Still Unnamed Air Filter Thing SUAFT is a combination activated carbon and HEPA filter for 3D printing. It uses 75x30mm radial fans to draw air first through a pair of activated carbon packs and then through a HEPA filter. This…
I really like and appreciate the models of JR Lomas and wanted to use them in my printer, but I found out that the lack of bottom mountings makes my toolhead unstable and shaky. That's why I designed my own mount, which is fully…
A detailed 3D model of a high-end contemporary residence featuring strong geometric volumes, a prominent upper-floor cantilever frame, and extensive glass openings. The layout includes a covered carport structure, integrated perimeter…
This are some brackets for a common kind of led strip that i can find locally , this bases are very versatile you can place one in different positions inside the machine to suit your needs The brackets have a cable routing channel to…
I changed the Top Case of Michael Fanta to have the ESP Cams as Corner Cams. ESP32_Cam_Case_Top_Part.stl Original Model I use two M3 heat inserts to assemble it to the Encloser Corners. The 02 Version i use for the Front Left Corner the…
Enclosed classic labyrinth design for earrings or pendant. Category: Earrings
Description This is a 'simple' (for assembly and use, at least) winder for embroider floss with a 4.421 : 1 ratio. That means that one crank of the handle gets you almost four and a half turns of the bobbin winding up your thread or…
The model allows to mount two enclosed 2.5" drives (HDD/SSD) on Ikea Skadis board. Designed for the UGREEN USB 3.1 Hard Dririve Enclosure. https://www.amazon.nl/-/en/dp/B07D2BHVBD
for NTAG or other NFC/RFID sticker with 26mm diameter space
This is an excuse for me to mess around. This is my 4th design… ever. I know I have a lot to learn. Got a printer in December '23 and have been mostly printing STL's. Upgraded printers and started designing during April '24. Parts…
Having tried a number of dual 5015 cooling ducts for the Sprite extruder, the Heartbreaker MK5 is far and away my favorite. It's an excellent design that moves a good volume of air and adds the option for a bore camera focused on the…
Die Temperatur im Tukkari liegt bei PLA und PETG eigentlich immer unter 40°. Auch das Netzteil war bisher maximal handwarm. Trotzdem habe ich einen 40mm USB-Lüfter angebracht, um bei höheren Temperaturen die PSU zusätzlich kühlen zu…
I remixed the walls of the bin to be more time efficient when printing at the cost of aesthetics. This print will save you about 1 hour printing time.
Re use your old stock ender 3 spoolholder on your enclosed E3NG Attatch the spoolholder to the mount using 2x m5x8 and m5 heatset inserts from the E3NG bom Use 3x m3x10 and tnuts to attatch the mount to the printer. Use one of the top…
Guida per l'assemblaggio (scroll down for english version) Lo scopo di questo filtro è di abbattere fino al 99% le emissioni nocive prodotte dalle stampanti 3d, grazie a 2 filtri hepa in aggiunta a un filtro a carboni attivi. Costo totale…
This is a remix of @jonspaceharper's SUAFT air fiter. He encouraged me to make a modded version with magnets instead of screws for the AC packs, which worked rather nicely. The original model uses four screws to fix the activated carbon…
If your like me you've found that the hole left at the back of the enclosed MMU3 option for the Core One printer causes significant heat loss. This results in lower chamber temperatures and longer chamber heat up times. When I am not…
The factory solution for securing the side loading PTFE tube onto the extuder eventually causes the main cable to sag and become compressed between the extuder carriage and the X-Axis motor. This mod changes where the side loading PTFE…
This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do with it did not work out, so I will put it up here and come back and see if there's anything i can do with this later.…
The Prusa enclosure addon for the buffer uses their standard 20x6x2mm magnets, however this size is not readily available like the 20x5x2mm version that you can find all over Amazon. I modified the slots to accommodate two of these…
I lost some files between building this and now, and did not make a parts list when building. I have the key files included and can try to find specific missing models if requested. I posted this as there was enough work that went into…
This provides replaces the sides for Repwinder to use modified sides (inspired by RackStand). The sides are small enough that two will fit on the build plate (see 3mf - if using the STL split it into objects and rotate one side by 180…
I have a completely enclosed Ender 5 S1 (Creality official enclosure parts) running Klipper off a Pi 3. It is dark in there for a camera, and there are few useful mounting points to see the first layer without interfering with moving bits…
It's a white elephant gift box. What's inside? A hollow fur tree! Print this with a pause to insert said dollar bill(s) or other small objects. The purpose is to give it to someone that you want to see smash it up in order to get what's…
I wanted to mount some LED Stripes to my Printer for better illumination so i made these LED-Stripe Holders. I've got inspired by Bacon2002's design. https://www.printables.com/model/397097-ratrig-v-core-31-enclosure-v2-led-mount I didn't…
This mount is for the metal case enclosed Arducam OV5648. I used this one . It will only work on the Switchwire if it is the enclosure is not used. there is not room for the front panels. BOM: 1 x M3 heat set insert (3x5x4) 1 x M3 6mm…
I was disappointed that the encloser did not support the corner leds on the front. So I made this in tinkercad. Does not use the LDO led pcbs. Use bare led tape instead. Diffusers are super glued to the corners. Please note I have not yet…
This fully enclosed U.S. coin holder securely stores your pennies, nickels, dimes, and quarters. You can leave it upside down and vigorously shake it; your coins aren't going anywhere. This coin container and organizer has a screw-cap lid…
🇩🇪 Deutsch reSpeaker XVF3800 Gehäuse mit integriertem Lautsprecher: Voice-Satellit für Home Assistant Ein kompaktes, rundes Gehäuse für das reSpeaker XMOS XVF3800 4-Mic Array mit XIAO ESP32S3 von Seeed Studio. Es ist um einen…
