Liczymy pasujące modele…
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu
Saint Martha Crushing The Local Dragon Underfoot. Added UV Displacment for small details.
Wydruk około 7,46 €–9,11 € nettoWstępna wycena jednego wariantu
I needed more shelf space to put three printers, but the screen made the printer take up too much space width wise. So, I designed this mount to move the screen on top of the printer and right next to the build plate. I made sure the hot…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
I needed to move my extruder because the filament was coming from above in my enclosure. I printed it with minimal support on the base part
Wydruk około 4,20 €–5,14 € nettoWstępna wycena jednego wariantu
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
more compact form / rigid 15%infil+ the better 3 layers 0.2 lay flat and add supports on the back of the screen holes
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
If you've ever thought of upgrading your printer to dual Z drive, you've probably run into the problem that the power supply is in a very bad place. This simple little model will help you move the power supply under the heated bed. It…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
Brackets to lower the front crossbar on the Ender 5 (or similar), to make it easier to see what's printing. Buy me a coffee No additional fixings are required - just use the 3 bolts which secure the original corner brackets and crossbar.…
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…
This is a bracket to relocate the front crossbar of the Ender 5 Plus to get a better view of the build plate. You may locate the crossbar at any height you find suitable for your setup. Also consider printing the End Covers that protects…
Update ---2023/08/11--- A model with a straight tail type is now available. -- 2024/02/27 -- I am very pleased to have this model featured in Loyal Moses' Monday Makes. I am very honored that so many people have 3D printed the…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…
I liked Peter Mastren's idea of relocating the filament sensor as a pass through. Used his layout with the remixed K1 Max Riser I made and came up with this. I also added the cutout to make it easier to remove/reset the lock washer.…
This is a bracket that centers the filament sensor when running a dual spool setup. features a clip on each side to retain your cut filament. Relocates filament sensor to be centered between spools Clips to top of printer. I use this for…
A Mod for relocating the Endstop-Y in Voron 2.4. You do not loose an Y print range. You need 3 x M3 heatinserts, 2 longer M3 screws for attaching the A motor. The bumper distance is adjustable.
It is not easy to locate the bed on a 420x420 machine. I have designed this locator to fit the Anycubic Kobra 2 Max. Note: 2 models the difference is the clearance on the side to the gantry/motor. Some machines require a narrow model…
For more info about this project, please have a look at my blog post .
This model remixes the right rear riser from the original “ JC-Creality K1 Lid Riser ” by Joe Cooper which must be printed for this to be useful. The rear mounted filament spool holder on the Creality K1 is inconvenient if not downright…
j'ai constaté , que la tige filetée de l'axe Z ,pouvait bouger en la soulevant et avoir un jeu en hauteur , environ 1 mm . il suffit d'imprimer cette pièce , 2 vis de 3x12 ! de la graisse à déposer entre le roulement et la pièce de…
I called it HIT FM Hold It Tight Filament Mount :) ... again am running out of names . Its it is annoying to have so much filament wasted with the flimzy mounted filament sensor all the way to the top , I never liked it, it looks like it…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…
Simple Bracket to relocate your X-Gantry Cable. Solve problem with cable being in the way. Allows better travel of the cable. You will need to reroute existing cable from underneath the printer to use this bracket. I have included several…
This is a 3D-printable and open-source stand designed to hold 96-well-plates at a 30-degree angle and is capable of highlighting well numbers. Using this stand, you can locate the well and be able to pipette more quickly and accurately,…
Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…
Few people have said that the fit is snug, I would suggest scaling everything to 102% should make it a bit less snug. Currently i'm working 72hr weeks and don't have the time to get around to fixing this. DISCLAIMER: You will have to trim…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…
This model allows you to move the filament reel and the filament sensor lower down the side of the printer. It reduces the issue with the reel uncontrollably unspooling the filament, and reduces the overall height and width of the…
Based on the Wolf Tooth B-RAD system which allows users to relocate their bottle/cargo cages & accommodates additional cages as necessary. There are 2, 3, & 4 set-of-hole variants. The 2 & 3 hole configurations are part of the same SLDPRT…
Description: My Voron 2.4 uses a Nighthawk SB toolhead board with an upper umbilical mount at the vent location. Due to the cable thickness and exit direction from the board, the loop from the board to the lower strain relief mount either…
I downloaded this cam relocator from Makerworld and printed it. Significant improvement of the camera position and view! Thanks to the originator " mlodybuk "! You did a great job! Following instructions have been done on my Bambu Lab A1,…
An end cover for the Ender 5 Plus to cover the sharp edges of the exposed beams when relocating the crossbar. You can find the crossbar relocator here: https://www.prusaprinters.org/prints/116582-ender-5-plus-crossbar-variable-relocator…
I keep dropping those small locator buttons on my Dillon XL 650 reloading press... This tap/handle is making my reloading life a lot easier. Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time. >>…
Hi everyone! I designed a Cover for my Ender 3 V3 SE and redesigned a fan relocation bracket found on printables. Both of them replace the original extruder/hotend housing for a lighter and sleeker design. You also need Vent Ring found…
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
Note: You have to press it with some force down on the rail in order to fit. I had to use a wrench. Screen ribbon cable was too short for me. Had to remove cablestrains in order to fit. Orderer a new cable on AliExpress. Category: 3D…
Remix from Kraftwork47 (https://www.thingiverse.com/thing:6248552) This mount relocates the filament runout sensor from the back of the machine to the right side. It offsets the sensor 45mm to line up with a feeder/dryer or side spool. A…
Esta rueda loca ha sido diseñada para ser compatible con canicas de 15 a 16 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…
MASSIVE VISUAL UPGRADE FOR ENDER 3 PRINTERS POWERSUPPLY RELOCATION UNDER THE BED (IN TESTING) (Is not usable for PRO and V2) SUPPORT ME BY PAYPAL!!!: https://paypal.me/zltncsk If you woul like to see new upgrades for 3D printers, and…
New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a…
This is an updated version V1.2 Previous V1.1: https://www.thingiverse.com/thing:4820250 V1.2 fixes: Larger holes for easier screw insertion, Now compatible with camera mounting solutions like these:…
I didn't like the filament runout sensor location, leaves too much unusable filament, so I created a way to mount it on the hotend. I included left and right guide mounts, so you can move the spool to either side of the printer if you…
this mount is basically a copy of the original one, just made one because I had lost my old one. dont change the orientation as it will be weaker pointing any other way Made for the Eufy solocam s340
The original spool holder extends the printers footprint to where it won't fit in most benches or will take up most of the space. There are solutions to relocate over the printer but this adds additional weight to the top of the printer…
This is a remix of ThatGuy @ThatGuy_613397 Please check out his Blog https://tristam.ie/2024/1126/?utm_source=printables_esp32-s3-esphome-voice-assistant-with-local-wake-word
Didn't want the DD extruder to hit the mount at max height and the fit is also more snug than the original model.
This remixed model allows you to move the filament reel and the filament sensor lower down the side of the printer. It reduces the overall height and width of the printer. It uses the stock spool mounting parts plus one 10mm wood-screw to…
bracket to relocate filament sensor on kobra s1 to allow for use of y splitter Pairs great with my External Spool holder here's the Y Splitter I use Category: 3D Printer Accessories
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Wykorzystałem oryginalny model obudowy…
No print support needed! I know this is not the first model for this purpose, this one uses heat inserts (M3, 4mm long, 4.6mm or 5mm OD) Also added a bunch of additional mounting point (meant to use heat inserts M3, 4mm long, 4.6mm or 5mm…
3D reconstruction of an Anomalocaris. I recommend printing it at a finer layer height or using a resin printer. There are two different size variations. One small and one large. These are based off of size estimates of Anomalocaris I…
Below will progress through in this order: left vertical line front horizontal line right vertical line back horizontal line if the print is within 10 of all 4 sides it doesn't do a prime line
Odd Cambrian arthropod, known as an early predatory animal.
This bracket relocates the filament sensor on the Anycubic Kobra S1 combo, designed specifically to address friction and positioning limitations I encountered with other solutions. Key features include: Repositions the sensor straight…
Simply place in outlet box and put your drywall over the top. Marker will push through the sheet-rock. Then Router or cut out your box. You will need supports for the tip. Recommend printing in ASA or better. This is V1 Leave feedback for…
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Visual upgrade for Ender 3 Pro Printers Is not usable for Ender 3 and not tested on Ender 3 V2 (feel free to try it out for the V2) Support me by covering a coffee to get/keep me going! Venmo: @dannyjvj SUMMARY: After upgrading my PSU fan…
BONUS MOD FOR THE TINKERERS: I have added a bigger compression ring for the Tangle Detection. The bigger ring increases tension required for the Tangle Detection to trip in return allowing more friction to be permitted through the system.…
Lovecraftian location connectors for linking location cards in Arkham Horror LCG. One two-way arrow and two different one-way arrows in the same style. Print instructions The thin walls are sized for 0.1mm layers. I printed in Prusament…
I received the updated spools for the AD5x and they work fantastic except that they raise the center of the spool upwards so some of my cardboard spools would rub the IFS with channel 1 and 4 spools. I made this adapter bracket to lift…
I like the simplicity of this model and the reviews of the fitment were correct. This model fits into the top of the Elegoo Centauri Carbon with almost a snap fit. I removed the rear rim so the top plate can be slid backward for venting.…
Esta rueda loca ha sido diseñada para ser compatible con canicas de 21 a 22 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…
This kit removes the bulky spool holder handing off the side of the Anycubic Kobra Plus and relocates it opposite the LCD screen. I have my printer on a sliding tray under my workbench, so I couldn't use the top-mounted spool holders. An…
This is a local pub around our way for N Guage Model Railway
A simple mount for relocation of the runout sensor on an Elegoo Centauri Carbon printer. The example in the photo is PETG. I recommend Elegoo Rapid PETG , particularly when printing functional printer parts on the Centauri Carbon. PETG…
There are three files. “ PS side bracket with 40x40 mount.stl ” adds a 40x40 extrusion endcap with a hole to the original Side bracket design to screw the bracket to the existing threaded holes in the lower frame extrusion. “ newPScase…
WARNING: You will lose the small amount of adjustability that Minsekt's endstop piece has (it can only be mounted fully forward).…
Meet the Anomalocaris! The Anomalocaris was a marine predator that lived during the Cambrian period around 530 million years ago. Growing up to a meter long. This ancient hunter primarily fed on soft-bodied prey in the early oceans,…
For installation, you have to remove the filament sensor cable from the aluminum extrusion. Pop off the top brace by removing the six screws on top, then remove the cable from the top brace. I removed the gantry from the base to pull out…
Why I created support? I wanted to be able to put my Magic Keyboard vertically on a support but I could not find any model, this in order to make room on my desk to be able to use the most space to be able to work. So I created my own…
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
Add a power switch to the front of your Creality K1 or K1C, if you don't feeling like reaching to the back of the machine…. i have no idea what screen the K1 max uses, but it might be the same screen. Does not use factory installed switch…
Achieve optimal camera angles and maximize your surveillance coverage! Transform your Eufy Solo Cam S340 into a versatile corner-mounted security device with this custom-designed 3D printed corner mount. Make sure to use filament that can…
ATTENTION: because of the cable length only being just long enough. arranging your cable like this will remove about 6cm of your build volume height, so your total volume would be 32x32x34 V2: Adjusted the fit so they hold together…
A cactus with articulated dangly legs. No supports necessary.
Organizer for Oathsworn tokens, coins and other things. Lids have names on them. Remix from https://www.thingiverse.com/thing:5446442
Organizador de cables para colocar debajo del escritorio. Fácil de instalar con un tornillo para madera M4 de 25mm, Imprimir en PTEG muy resistente.
UPDATE 1: I was asked if i could do a model without the switch. It is included now. I wanted to relocate the power switch to the front so I made a screen cover that has a lid with a place for a switch. I also added a spot to relocate the…
About the relocation; I got the idea from https://www.thingiverse.com/thing:3830464 . Moving the electronics out of the cube structure gets me one step closer to an enclosed printer. Also I will soon receive the new 32-bit 4.2.7 ARM-based…
If you're going with CANBUS and you want to relocate your Y endstop without printing new idlers.
This is a model I made after moving my printer to my current work station since the OEM filament spool holder was is too tall. This model functions to relocate the filament spool holder onto the Z-axis frame left corner lowering the…
Simple holder for laying the X-gantry cable. Solves the problem of the cable being in the way. Enables better cable routing. This modifaction is compatible with the other modifactions I have provided for the Kobra 2 Max.
NOTE 3MF is Required in this model as negative parts are used Pla or ASA or ABS, it is a little flimsy as PLA but it does work, one in photos is in pla This will work on EITHER the left panel screws or the rear panel Screws 2 M3 Nuts need…
With the option to place a second spool (thanks @Anthony ) at top of my Ender 3 S1 Plus, i also wanted to relocate the filament sensor in addition with the ability to fix the not-used filament. Thus, i first printed the already remixed…
I really liked the unibody style of riser and so I printed AP's remix of a K1 riser, but I found the distance between the corners was a bit too big resulting in the legs not fitting into the four corners of the printer. This has a…
This mod moves the light bar out to the front of the printer instead of directly above the X Gantry, reducing the shadows created by the original light bar placement. In the photos, my LED Diffuser mod is pictured, which can be found…
.2mm layer height, printed in PLA worked fine, extra walls is nice ~4 walls
I designed some Adapters to fit SC and LC Fiber Plugs on a Visual Fault Locator from Wish WARNING! don't use Pressure on screwing the Adaptors on the Laser. You can Brake your Laser Diod!!!
The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap…
This fits my MLOK cage and MLok rails I designed for my radios. It will relocate a digirig via mlok nuts. Links MLok Nuts - https://www.amazon.com/dp/B0B845WY3D?ref=fed_asin_title&th=1 Related Models Icom IC-2350H Cage -…
I just did a remix so if your cable is short just print this re locator .Fix it with the 1 original screw. Print head can stil reach max position. Use good infill i have printed at 65% for rigidity and if you use enclosure ABS or ASA …but…
A location card holder with movable control indicators. I made it shorter (in Z axis) and removed magnets sockets. See second version here https://www.printables.com/model/878107-harry-potter-howarts-battle-simpler-location-card —…
This mod is relocating stock spool holder to the right side, lowering printer height and mass center, which leads to significantly reducing print vibrations. Stock location of spool holder is shifting printer mass center toward rear top…
Keep your filament run-out sensor in the center and the standard spool holder to one side. This uses only hardware supplied in the box with a Creality Ender 3 S1 Pro. Thread the original run-out sensor screw directly into the small hole…
