P
PrintablesBraxen
Tomte (Gnome/Santa)
A small gnome with his nose out. Modelled after a gnome found on Åhlens.
- Pobrania
- 512
- Polubienia
- 103
- Ocena
- 5
Wyniki wyszukiwania: omt
Liczymy pasujące modele…
P
PrintablesModcre8tor
Fiat 500 TomTom Phone Stand
This insert goes into the TomTom port on your dash, if equipped. Most 2013+ models had the tomtom port (for the OEM navigation). I ordered an automatic closing Cell phone holder from amazon, link below and simply mounted the end of it to…
- Pobrania
- 510
- Polubienia
- 13
- Ocena
- 5
P
PrintablesMaut
Tomte (Gnome/Santa) keychain
I remodeled this gnome to have a hole in it so you can use it as a keychain. I printed it at 80% as that is the size of a normal key. EDIT: added a file with a smaller hole, when scaling the original file the top of the print was too…
- Pobrania
- 471
- Polubienia
- 94
- Ocena
- 5
P
PrintablesSarge013
Omtech Polar Exhaust Fan Shroud
A simple duct/shroud to guide airflow after removing the stock fan, which if using the inline fan provided only causes an airflow restriction. Bolts into place exactly where the original fan went using the same hardware. I would advise…
- Pobrania
- 375
- Polubienia
- 26
- Ocena
- 5
P
Printables3dPeter
Tomtom sunscreen
sunscreen found on Tingiverse for my motorbuddy.
- Pobrania
- 359
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMr_Tantrum
OMTech Polar Fixed Riser
This is a fixed height riser for the OMTech Polar. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine to the maximum height for engraving cylinders with…
- Pobrania
- 359
- Polubienia
- 26
- Ocena
- 5
P
PrintablesJurgen
TomTom Rider raincover
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3105036 . This remixed version is sturdier and made…
- Pobrania
- 344
- Polubienia
- 7
- Ocena
- 5
P
PrintablesLasercat
Material pin for omtech polar 350
Material hold down pin for lasercutting. Hex size is 7mm to fit the honeycomb that comes with the omtech polar 350
- Pobrania
- 319
- Polubienia
- 16
- Ocena
- 5
P
PrintablesFidreus
Wall holder for IKEA OMTÄNKSAM shoehorn
Three versions, one that makes is touch the wall and two deeper one that makes the shoehorn hang 5mm or 10mm further out from the wall.
- Pobrania
- 313
- Polubienia
- 29
- Ocena
- 4,67
P
PrintablesFrankWL
Schutzkappe fuer TomTom Rider 4xx
ReadMe.txt Schutzkappe fuer TomTom Rider 4xx Anwendung: Regenschutz für Ladehalter der TomTom Rider 4xx Serie Dank an: JordanAltena https://www.thingiverse.com/thing:2819259 Stueckliste: 1 Stueck Schutzkappe V04 Einschraenkung: keine…
- Pobrania
- 290
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPaw85
Reverse Alignment Tool for Co2 Laser, Omtech
This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…
- Pobrania
- 283
- Polubienia
- 35
- Ocena
- 5
P
PrintablesGuido
Sunshield TomTom rider (Made for 400, should fit any newer model since form factor isn't changed)
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
- Pobrania
- 241
- Polubienia
- 16
- Ocena
- 0
P
Printablesfunprints4ever
Tomtom rider power button
So I bought TomTom Rider 400 and had it sent to me. When I received it, I noticed that the power button is broken
- Pobrania
- 211
- Polubienia
- 1
- Ocena
- 0
P
Printablestmorris9
2 Line laser mount for CO2 laser (Chinese Omtech)
You will need M3 heat set inserts, 2 M3 set screws (grub screws) and 2 line laser modules. I am posting this per request so I am not going to do a step by step but just set up as you see in the photos. Adjust the lasers with the end caps…
- Pobrania
- 210
- Polubienia
- 23
- Ocena
- 5
P
PrintablesDJMitch117
Replacement Battery Cover for 3M™ PELTOR™ ComTac Headsets
Replacement Battery Cover for 3M™ PELTOR™ ComTac Headsets. Printed in flexible TPU with my Creality CR-6 SE. It can be tricky to print this without any layer/wall separation (using the cheap filament that I use anyway). I print these…
- Pobrania
- 180
- Polubienia
- 11
- Ocena
- 0
P
Printablespwmodder1027
OMTECH / Chinese Laser Triangle Key - REMIX
Remix of Shinobi82's triangle key for OMTech / Chinese Laser engravers. The original was a little thin for where you grab it. I just made it thicker. The original works great so nothing more was needed other than a little more surface…
- Pobrania
- 159
- Polubienia
- 19
- Ocena
- 5
P
PrintablesMeierme176
Chuck Jaw Blanks for Omtech Rotary (K11-80 Chuck)
These are chuck jaw blanks designed for the K11-80 3-jaw chuck included with Omtech’s rotary attachment: https://omtechlaser.com/products/rotary-axis-lra-kp58-00 The blanks are intended as a starting point for users who want to create…
- Pobrania
- 150
- Polubienia
- 15
- Ocena
- 5
P
PrintablesFrank Wiebenga
OMTech Polar Adjustable Feet
Flip the screw so the top is face down and put support there, no support anywhere else. 4 external walls. Some sanding may be required. 35mm to 60mm work area for screw.
- Pobrania
- 144
- Polubienia
- 14
- Ocena
- 0
P
PrintablesAnachronist
TomTom GPS ball-joint socket adapter plate (customizable)
This is a ball/socket mounting plate for a TomTom GPS. It was designed to be compatible with most TomTom GPS products. There are two types of mounts: A ball mount, for mounting your TomTom into a ball socket. A threaded socket mount with…
- Pobrania
- 140
- Polubienia
- 8
- Ocena
- 5
P
Printablesgeorgewoodall82
Tomtom Start and Via 52 17mm Ball Mount
Clips onto the back of the following tomtom models: START 42, START 52, START 62, VIA 52, VIA 53, VIA 62 The model obviously just provides 4 screw holes and not a ball mount, this is because you also need to print this model…
- Pobrania
- 139
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRetro Realistic Hobbies
Omtech Polar Honeycomb Locking Wedges
Omtech Polar Honeycomb Locking Wedges Small screws needed to tighten them up.
- Pobrania
- 135
- Polubienia
- 10
- Ocena
- 4
P
Printableslivius
TomTom Go ball mount
For TomTom with ball mount e.g. TomTom Go 500 etc. If your suction cup no longer holds onto the windshield (my situation), you can use this. Much more durable and cheaper :) Depend of the mounting place use appropriate model. 3mf file…
- Pobrania
- 132
- Polubienia
- 11
- Ocena
- 5
P
PrintablesTBX
Mounting Bracket TomTom Rider 400/500 series KTM 990 SMR/SMT/Adventure
TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....
- Pobrania
- 128
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMr_Tantrum
OMTech Polar Manual Focus Block
There are two ways to focus your OMTech Polar: Subtract the width of your material in mm from 17mm, then set a z-axis offset in LightBurn while making sure you home the laser lens before each print - WHAT A PAIN! Install an external Ruida…
- Pobrania
- 120
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJurgen
TomTom Rider raincover (DO NOT TOUCH)
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3428080 I have adjusted this version so that it is…
- Pobrania
- 116
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJohnM
Garmin Zumo XT XT2 TomTom sat-nav mount adaptor for BMW GS screen brace
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
- Pobrania
- 116
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPeter H
TOMTOM 620 ANTI-GLARE HOOD
A friend had a bit of cardboard taped over the top of his GPS unit to stop the glare from his steeply sloping windscreen. I figured there had to be a better way! This cover slips nicely on top of the TomTom device and all buttons and…
- Pobrania
- 104
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTrekking
ZoomThrow Lever - Primary Arms 3-9x40mm Scope/Vortex Sonora
Edited April 2, 2024 This ring also fits the Vortex Sonora 4-12x44mm scope. Sonora is the Crossfire II 4-12x44mm branded for sale to dealers. Two of the stubs don't quite line up but close enough to work without alteration. Original Post:…
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJohnM
TomTom Rider mount adaptor | Power your phone from a sat-nav bracket
While the TomTom Rider is an excellent sat-nav on my bike, I've been increasingly using Calimoto for rides when I just want to enjoy myself and discover new roads (it's a great app and it's free to try). This adaptor is available with or…
- Pobrania
- 93
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCh3vr0n
Tomtom Rider 500/550 Backplate & ram mount
Tomtom Rider 500/550 GPS adapter for phone holder
- Pobrania
- 92
- Polubienia
- 5
- Ocena
- 0
P
Printablesmartin
Ikea OMTÄNKSAM shoehorn holder
Wall mount holder for IKEA OMTÄNKSAM shoehorn spoon and many other similar shoehorns Easy mount using only one screw Screw 4,5x55 (or 4x50) for best fit v2 - screw cap added for better look
- Pobrania
- 90
- Polubienia
- 12
- Ocena
- 0
P
Printablesstone
Ikea Omtänksam shoehorn wall hanger
Ikea's metallic shoehorn was always falling down or hidden in the closet, so I made a little and simple wall mount for it that prints quickly and is mounted to the wall with just one skrew. Can be customized by adding text in prusa slicer…
- Pobrania
- 89
- Polubienia
- 7
- Ocena
- 5
P
Printablessongdawgdesigns
Dual Business Card Laser Engraving Jig – Fiber & CO₂ Alignment Fixture for xTool, OMTech, Epilog
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
- Pobrania
- 82
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMorten Haglund
Shoehorn holder for omtänksam
This is a holder for the Ikea omtänksam shoehorn, its with and without screw mounting The screw is a normal wood-screw with 8mm head. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .3 Infill: 10% Filament: Clash…
- Pobrania
- 82
- Polubienia
- 5
- Ocena
- 0
P
Printableskernelpanic
TomTom Rider 500 Full Motorcycle RAM Mount
Since I now have my third motorcycle and didn't want to buy another ridiculously overpriced mount from TomTom, I simply searched what 3D models are already available. The mount is attached to my Royal Enfield Himalayan and holds…
- Pobrania
- 80
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAndAug
TomTom Rider 4.xx - Remix
Basically the same as the original, but with a long mould for not pushing onto the contacts, when cap ist on.... and maybe a bit thicker, to sink a TomTom Logo 0.5mm deep into the bottom. ;) TomTom Logo can be taken from Wikipedias TomTom…
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 5
P
Printablesrobarm74
TomTom Rider 550 Stand
Another TomTom Rider stand . I have made it for my TomTom Rider 550. I think it can be used also for 4xx model. This model is a work in progress. I want add 2 pin (pogopin?) for power up. Category: Other
- Pobrania
- 78
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAdrian
Steam Comtroller Holder / Wall mount
A simple design which securely holds the controller with a low profile. It mounts with 3mm screws Category: Video Games
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 4,5
P
Printablesmoranski
Tom By TomTom car mount
This is a two-part 3D-printable holder that accepts the original TomTom magnetic car mount (the small magnetic plate that comes with the Tom device) and clamps onto a car air vent. It lets you avoid sticking the magnetic base to your…
- Pobrania
- 65
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGoogle_Bhrome
Peltor Comtac Gel Cup Protector.
Gel Cups typically squish and lose a good seal when compressed for a long time, this will prevent that while in storage. Might work for other brands, leave a comment if it does! should fit all these models plus Peltors comtacs WorkTunes…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 5
P
PrintablesBookaroo
Telepromter Build for Frank's 3D Shop Youtube Channel
This is from my Youtube channel video https://youtu.be/GS3796X_zcM about the build of my Teleprompter. When I speak to you in front of the camera now, I am reading a text I have written. It helps me concentrate on other things, body…
- Pobrania
- 64
- Polubienia
- 8
- Ocena
- 0
P
Printablesjacknife1962
support for tomtom or phone
support for tomtom xl, with module to use as an alternative also any type of mobile phone, designed and printed for a friend with a Bmw GS motorcycle but I think it can also go for other motorcycles that have a tubular between 11 and 13…
- Pobrania
- 64
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSamAlfano
Omtech Polar laser Ruida controller shelf
For those using the outboard Ruida controller on the Omtech Polar laser, and who have printed the case for it, this shelf will allow the controller to hang off the side for a better viewing angle. The shelf is two files - the base and the…
- Pobrania
- 63
- Polubienia
- 12
- Ocena
- 0
P
PrintablesModcre8tor
Fiat 500 TomTom Port Garage Door Opener
This is a little stand that goes in the original TomTom port of 2013+ era Fiat 500's. I designed this to better place my small garage door opener since I lost the clip for it. It fits a chamberlain/liftmaster 3-button remote and if you…
- Pobrania
- 57
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLukaszemko
Ram mount for tomtom rider 550
Single part with standard RAM ball and tomtom handle on the opposite side
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMr_Tantrum
OMTech Polar Replacement Lens Cover
UPDATE 2023.12.02 I replaced my nozzle with an aftermarket one, and the sizing is different so the original cover no longer fits correctly. In response, I've modified the design and posted as v2. Version 2 of the cover will work both with…
- Pobrania
- 56
- Polubienia
- 6
- Ocena
- 5
P
PrintableseZ EcLiiPsE
Mammomtion Luba RTK Halter, für z.B. Flachdächer
Moin, ich habe gestern auch meine Luba erhalten und nach der besten RTK-Positionierung geguckt, diese war auf dem Flacdach, jedoch nicht mithilfe des beiliegenden Zubehörs montierbar. Jetzt bewegt sie sich dank der verschraubten…
- Pobrania
- 56
- Polubienia
- 8
- Ocena
- 0
P
PrintablesCh3vr0n
Backplate for Tomtom Rider 500/550 screw & collar
My dad needed an adapter plate so he could use his TomTom Rider 500 motorcycle GPS in the car. This thing was almost perfect. Designed to fit a phone holder i had lying around that had a 17.2mm ball instead of the 17mm of the original.…
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 0
P
Printablesreichi
TomTom Go Adapter M5 Screw
Attach your TomTom GO using this and a M5 Screw. There's a 25mm thread long M5 thread in the adapter, try to use a screw that uses most of it, to massively decrease the chance of failure. Tested with TomTomGo Expert Camper Max and Start…
- Pobrania
- 52
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChristopher Löwenstein
Holder for ikea shoehorn OMTÄNKSAM
printed at 20% infill PLA supports required fits M4 Screws
- Pobrania
- 51
- Polubienia
- 8
- Ocena
- 5
P
PrintablesSol_3
IKEA Metal Shoe Horn Holder - OMTÄNKSAM - w/6x2 Magnets
I really enjoyed finding and printing the model from @Stas911_1556451 But I only had 6x2 Magnets!
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
P
PrintablesStrankler
Hygromter/Temperature/Voltage Display Case
When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 5
P
Printablesschlotzz
TomTom Rider bracket mounting adapter
A compact solution for fastening a TomTom Rider active base to a common 22mm diameter bracket on my wife's Honda Transalp XL 750. Note: Due to size limitations the base is rotated by 90°. It hasn't been any problem, because the mount…
- Pobrania
- 49
- Polubienia
- 5
- Ocena
- 0
P
PrintablesA P
OMTech Polar rotary tensioner
This is a tensioner for the OMTech Polar stock rotary system, which helps keep tumblers pressed against the rotary wheels and prevents slipping and wandering. Tested with the "small diameter" rotary and an Rtic 20oz tumbler. Parts needed:…
- Pobrania
- 47
- Polubienia
- 5
- Ocena
- 0
P
Printables3design
Adaptador de soporte de navegación por satélite Garmin Zumo XT XT2 TomTom para BMW GS
no a la venta Adaptador para BMW R1200 R1250GS se agradece que dejen un comentario con fotos y se añada a me gusta.
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSkulbl4k4
TomTom Rider 400 Box
Simple TomTom RIder 400 box Category: Tool Holders & Boxes
- Pobrania
- 44
- Polubienia
- 6
- Ocena
- 5
P
PrintablesLucas
TomTom Ball joint repair
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again. Print with the open side down in a…
- Pobrania
- 44
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTHINGS 4 LIVE
Ackerman Steering Geomtery
¡Absolutamente! Aquí tienes algunas opciones para tu maqueta de geometría de Ackermann: Título: Maqueta de Geometría de Ackermann 3D Visualiza el Ackermann: Maqueta Imprimible en 3D Comprende el Ackermann: Modelo Físico Interactivo…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRambo
TomTom Ride GPS Mount (for motorcycle, fits at least Ducati MTS GT 2020))
My bike is Ducati MTS GT 2020, I'm 185cm tall, this is relevant to the parts where I talk about seeing the instruments and gps displays, your experience will vary based on your bike and height, download the Fusion project and adjust to…
- Pobrania
- 42
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDrksky
OMTech Triangle Key Knob
This was modeled in two snap-together parts to allow for the insertion of an 8x2mm round magnet to hold the knob in place on the triangle. It's designed to be more or less a friction fit, but there was some variability in the fit on all…
- Pobrania
- 41
- Polubienia
- 1
- Ocena
- 0
P
PrintablesA P
OMTech Polar Front Vent Cover
This is a front vent cover for the OMTech Polar. It helps to keep the “burning smell” down when you're not using the machine by slowing any backdraft that might push air from the machine into the room. It's not a complete solution because…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEl_ThoRo
Omtech laser Z-Axis 1/4 inch adapter
This adapter can be pushed onto the existing Z-Axis knob to raise or lower the bed using a power drill or another tool with a ¼ inch bit holder. The screw to remove the entire knob is left open intentionally.
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPapyjo
Support GPS Garmin TomTom GO61 rotule 16mm pour allume cigare Peugeot 208
Impression en PETG avec supports pour surplombs >45°; Remplissage 30%; coque épaisseur mini 2mm; Parois verticales 5. Un petit coup de papier de verre pour quelques imperfections, de la patience… Je joins le fichier F3D pour vos…
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTimotej Mierva
3axis joystick 3DOF joystick (OMTER TYXN)
An accurate model of cheap hobby 3D joystick. For mounting use 3mm thick board with 40mm hole in it. (that video is not
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJulien Mairy
Edmond Dantès - Comte de Monte-Cristo Buste
The Count of Monte Cristo – Edmond Dantès - Comte de Monte-Cristo Buste Français Cette interprétation sculpturale d’Edmond Dantès, plus connu sous le nom du Comte de Monte-Cristo, propose une vision noble, intense et intemporelle du…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
Printablessourx
Magnetic IKEA OMTÄNKSAM Shoe Horn Holder by Bernhard - Mounting Plate remixed
This remix contains a screwless mounting plate for tape mounting as well as one with a smaller M4 hole
- Pobrania
- 34
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMichaël C.
TomTom Rider 400 support for handlebars Ø12
Description Use Case I remixed this GPS support model so that it holds on a Ø12 mm tube. Be careful to take a break during printing to slide the nuts that will be held in place during tightening. Hardware need: 2 Vis CHC M8x25 2 M8 brake…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMr_Tantrum
OMTech Polar Replacement Button Protector
This is a button protector for the OMTech Polar 350. On occasion when using my Polar, I've accidentally hit the button with my arm, thus interrupting operations. This protector/cover is the perfect solution to prevent that from happening.…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFlashL
Shoehorn OMTÄNKSAM mount
Wallmount for the best shoehorn from IKEA.
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMagig_I3Prusa
Snailraider Starwars TomTOM style
starwars like snile kangaru hybrid HORSE Have Fun
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFlyingFrog
TomTom Rider Ständer / TomTom Rider Stand
Ständer für TomTom Rider 4x0 / 5x0 Ich habe diesen Ständer entworfen, um mein TomTom Rider 400 bequem am Schreibtisch nutzen zu können – beim Planen von Routen, bei System-Updates oder einfach zum Laden. Wichtig war mir dabei, dass das…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMaurice Günther
TomTom Rider 500/550
Halterung für TomTom Rider 500/550 an einer Tenere XT 660 Z. Durchmesser 16 mm Stangen.
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesIgloro
Shoehorn OMTÄNKSAM holder IKEA
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJay
OMTÄNKSAM - Shoehornholder
I designed this shoehorn stand because our shoehorn never seemed to have a dedicated place and was always ending up somewhere different. I wanted a simple solution that would keep it easily accessible right next to the front door. While…
- Pobrania
- 28
- Polubienia
- 12
- Ocena
- 0
P
PrintablesGiovanni1954
SUPPORTO GPS TOMTOM X MOTO
SUPPORTO GPS TOMTOM X MOTO Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 Nozzle: 0,8 Temperatura di Stampa: 205° Temperatura Piatto: 60° Riempimento: 20% Filamento: PLA XINGTONGZHILIAN
- Pobrania
- 28
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRoloando
Staender TOMTOM GO 5200, GO 6200
für TOMTOM GO 5200 und GO 6200 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBynio
Osłona przeciwsłoneczna do Tomtom 400-550
Jest to osłona słoneczna w pozycji pionowej
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEverythingGlows
Updated: TomTom Rider 400 active car Mount to RAM improved
Dieser Adapter ersetzt die originale Saugfußhalterung des TomTom Rider 400. Zusätzlich wird ein M4 Gewindeeinsatz zum einschmelzen sowie eine flache Schraube benötigt. Das Bauteilmuss gegebenenfalls so nachbearbeitet werden, dass das es…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRambo
TomTom Rider GPS mount and GoPro mount for it
2023.04 update: the holes for the gopro mount apparently created a stress-riser or something and the mount snapped off, I'm pretty sure glueing it on would work (and will likely repair mine with glue unless I decide to mount the gopro…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKarsten
TomTom Rider mount adaptor Remix
I liked the original idea and make of this adapter - but did not want to have my phone sit on top of the adapter itself. I have a quad lock mounted beside the Tomtom rider connector; therefore I just wanted the USB connection to be…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFabian Haensch
OMTech 8B69 C02 Laser 900x600 passthrough cover
This is a laser cut pass-through cover fitting for OMTech 60x90cm 8B69 The laser has 2 openings for fitting large pieces, which is quite dangerous. With this cover, you can close the machine and make it save. The cover is mounted with…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJohnM
BMW R1200 & R1250GS Garmin to TomTom mount converter plate
Use this plate to easily mount a TomTom in place of a Garmin on your BMW R1200GS or R1250GS. Will likely also work on the BMW S1000XR and other motorcycles with the sat-nav mounted in the same way.
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablesinjectx
Cover for TomTom Rider 4xx w. CFMoto logo
Model already oriented for printing You can add a color to the logo layer just like I did
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJavafuel B
Omtech Polar 350 Front Exhaust System
A front exhaust system for Omtech Polar 350, it further minimizes concinnated air from the front vents. See my blog for details and assembly instruction.
- Pobrania
- 24
- Polubienia
- 7
- Ocena
- 2
P
PrintablesVladimir Zavediaev
Ikea shoehorn holder (OMTÄNKSAM on double TJUSIG)
A shoehorn holder for owners of OMTÄNKSAM shoehorn and TWO (2) TJUSIG shoe racks (one on top of another). Print requires supports.
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJoerg Ehrhardt
KTM SMC-R mount for TomTom Rider
Every now and then I ride with Navi (TomTom Rider 550) on my KTM SMC-R (2019) Unfortunately, the original TomTom mount looks really shitty and is also very high. I'm also too lazy to unmount them completely every time I drive without the…
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesStefan666
22mm TomTom Rider 40 mount kit Honda Varadero
22mm TomTom Rider 40 mount kit If your RAM mount comes to far up your face on your Honda Varadero This allow you to flat-mount a regular 30x38 pattern tomtom ( Rider ) 40 on any bar. ( i use a piece of 22mm pipe , as i am to cheap to buy…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAce_Archer
Parametric Laser Focus Gauge Block, 0-6mm Heights for Setting cutting and engraving depths - for OMTech K40/K40+, Cloudray, Thunder Laser, Etc.
This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers. It supports material thicknesses from 0mm (for engraving) to 6mm (~¼"), with each height labeled on the block. the…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRoloando
TomTom GO5200_full
TomTom GO 5200 incl. Accessories Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKarsten
TomTom Rider mount adaptor Remix V3
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: Simple way to use USB Type-C to get 5V at up to 3A (15W) - Power - Electronic Component and Engineering Solution Forum -…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNiek van Strijp
TomTom Rider Mount
This is a mount for the TomTom rider car mount that can be attached in the ducato tablet holder instead of the standard suction cup as this fails in warm weather.
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
Printablesapopticon
3" Exhaust hose adaptor for Omtech K40 laser
Adaptor to fit 3" dryer vent hose to Omtec K40 laser. Probably fits most other K40 lasers. Prints with a very tight fit, will probably need a little sanding to fit, but it'll be tight enough to not need a clamp. The hose will need a clamp…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesfaeinthebay
![[WIP] 2007-2015 Fiat 500 phone mount for TomTom GPS dock port](https://media.printables.com/media/prints/df94d6bf-f2f8-4195-9a34-4671b10ce52d/images/12903526_d7899dd7-839f-43c8-9111-4835c96ace4e_0ce0db86-0a00-4bd4-ade0-c95c9abef672/screenshot-2026-05-13-122656.png)
[WIP] 2007-2015 Fiat 500 phone mount for TomTom GPS dock port
This is a ball mount to replace the TomTom Blue&Me GPS dock in Fiat 500/500e models (generally 2007-2015). You have to remove the dock from the dashboard with moderate force (or carve an identically shaped oval hole in newer/older models…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPteppic
Rival shells for BoomToob
I wanted my BoomToob to fire rivals (because they're just fun). So i made 3 full-size rival shells plus one half-size, which requires the shell-adapter: Shell_Rival: Simple full-size rival shell. Just print and play Shell_Rival_Barrel:…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBishop87
TomTom logo Keychain
TomTom logo Keychain A simple keychain with the (2021) TomTom logo, you can print with different color, just change filament at the right height.
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKarsten
TomTom Rider mount adaptor Remix V2
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: iCharging | Minty Boost | Adafruit Learning System
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPremysl Rudolf
Tomtom RIDER 400-550
Spodní část držáku Tomtom RIDER 400-550
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMezaME
Holder for an Omtänksam Shoehorn on a Tjusig shoerack
i would recommend using Petg for the Print cause you will need the flexibility for the snap. 0.2 mm Layers with 3 walls Also you should print it upright so the layeradhesion is not important for the snapmechanism
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDrenth Engineering
Tomtom Bandit case with lenscap
Case for the tomtom bandit with room for a few SD carts, an extra battery and some extra's. I printed the lens cap and the case top out of TPE, but TPU or any other soft to semi soft flexable material would do. Case bottom is printed out…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0