Liczymy pasujące modele…
This model is outdated, see the new version here https://www.printables.com/model/1165651-scuba-diver Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D…
Check out this video of me testing different elements of the design! If you want even more sizes, check out this video on how to edit my f3d model! This scuba tank holder prevents your tanks from rattling and rolling when driving to the…
Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D print. I first dusted the original (shiny black) plastic with the dirt by my door and set up a…
Just a few simple hose holders for scuba diving. A normal bolt-snap eye or a D-Ring (5mm thickness) goes into the small hole, the holder then snaps onto the hose. The fit on the hose is tight enough to not come lose when you don't want…
The main goal for this mod is that I can clean the nozzle after I pause and resume the print, which is usually make small leakage of nozzle. You need 2 heat insert for the brush holder, to fixed the holder on the frame mount. Another 2…
I needed to hang our new wings somehow and wanted it quickly, preferrably right now. 3D printing to the rescue! Printed using PETG, 0.2mm layer height and 4 perimeters for added strength. Infill probably does not matter too much. I…
EN Project under construction . The basic idea behind this printer is the template from MAQUINA with the PrusaBox project. I took that up and made the ChaosBox out of it. Everything he had drawn was made printable and public. The whole…
A Trilobite style line cutter, perfect as a backup line cutter while scuba diving, climbing, outdoor, survival, etc. prints in two parts that snap together and are secured with two M3 bolts totaling 10mm. WARNING: The utility knife blades…
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long…
Just recently I finished an OWD course, well not that recently, just before that corona thing. After first couple of dives in a three-noob buddy team in maybe 2 meter visibility I decided to make a mirror to help us stay together. It…
This is Lucky 13 scuba gear! Flippers, tank and belt and a minimal mask (needs work) The tank and belt print separately so that the tank can go past the hips, and also allows a different tank color. The belt could be printed as a separate…
This is a replica of the dust cap with O-ring groove of an Apeks DIN regulator. This model was created after my buddy lost the dust cap for his regulator and was unwilling to spend around 10 euros on a piece of plastic. For me, that was…
Well, after several years, I have decided to redo this model and add more markers! There is now a version 2 of the directional marker. This version has a more rounded tip, is more aesthetic, and has larger holes on the bottom to fit brass…
Original: I reworked the original to include a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. All in english: Full cap and Empty cap Tank dust caps for…
Scuba Diving Hanger you can use an M3 screw and a nut to join the parts together. Print instructions Category: 3D Printing
Includes a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. Remade the design by Lucianocunha ( https://www.thingiverse.com/thing:4552099 ) to work with…
Just a cool Scuba Duck for Jeep Ducking and/or Cruise Ducking. No supports.
A cap to protect the thread of DIN regulator, a small hole allow to use a cord to fix it and avoid to loose it. The design allow to use it easily
Need a dust cap for your second hand regulator? Here it is. Printed using PETG, 0.2mm layers, 3 perimeters, 15% infill and no supports. The original Apeks cap seals against the O-ring. To try the same thing with a printed top surface…
This is a fun sculpture idea I had that I decided to make. It's made of several models put together. I have more animals. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These are used to keep your tanks from rolling around while transporting them. Very basic to print. Use a type of filament that can withstand being outside and in the sun. PETG has been my choice. I use 5 Shells to make it strong. The…
Scuba Dive holder for camer and light Im print PLA NEBULA
Suitable for this scuba tank ! Don’t forget to make a horizontal and vertical cut to try whether it fits on the tank! Print with PETG, set high number of perimeters and infill to make it strong. Print the bottom 3-5mm with flexible…
Dual Scuba Tanks to use as a key ring or in a diorama.
GoPro scuba diving rig (German below) This is my GoPro diving rig. The GoPro is mounted with the quick release plate, which is in my opinion more stable for 3D printing. The rig floats, even with the GoPro and lamp!!! I use the following…
Scuba Diving Reel BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed Smooth Operation
This cap fits on all 1st stage DIN regulators. It prints with no support. If you enable ironing, the inner surface where the o-ring touches the cap should be smooth engough to give a good seal. There is also a hole in the cap to attach a…
This is a model of a scuba diving weight (1.5 kg) .I printed it and use it to make a mold for the real lead weight. Finer you make the layer height ,the surface of casted weight will bi smoother as well.
A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…
Hooking air hoses for diving
A Hook to dry and protect your first Stages. I used PETG Have Fun.
This model is compatible with the lego system.
I noticed that my spare regulator hose is approx 14 mm in diameter which did not fit the original design. So I remixed the original design of Megabusa as found here: https://www.thingiverse.com/thing:842085 I made it more sturdier and…
A simple diving spool to screw together. With an elastic rubber band you can attach a loop in the middle hole. With the additional small hole in the wall you can attach the cord to the dive spool.
This is a magnetic breakaway adapter mainly for the octopus/backup regulator on a normal (non-DIR) setup. I designed it to be as compact as possible while still accomodating a reasonably strong magnet. The mechanism should connect quite…
Suitable for this tank! The most ideal is to print it with perimeters only (set 999 in PrusaSlicer), but you might want to save some material. For this reason, we suggest using at least 8 perimeters and increasing the infill to 70-80%.…
DIN Valve Scuba Tank and Regulator. USA DIN valve Dust / Weather cover for Scuba Tank Valve and for Scuba Regulator. It took a little bit of research to get the correct threads. After that this was a simple drawing. The tank cover must…
Credit to the original model, it's really well designed. This version adds a slot to run a ratchet strap, and makes it easier to mount to a board or the wall by flattening out the bottom of the bungee holes, and providing a screw hole.…
This is a simple hand tool for the proprietary Scubapro low pressure hoses (2nd stage side), and it's a good thing to put in your save-a-dive-kit if you do have those hoses. I recommend printing it with PLA or ABS using 0.2mm layer.…
This is a set of pieces that can be used to recreate a Scuba Diver figure at 500% scale. This figure was released in 2015 and was included in 6 sets between 2015 - 2017. All of the stl files needed to create this have been included in the…
It would appear that I've been making a lot of diving-related hangers recently. So here's another one. This one is intended for my regulators, although you could hang other stuff from it. Judging by the shape of its lower part, maybe it…
Holder for mounting lighting on the DPV diving scooter.
Another spool for scuba diving, with a good grip. It can hold up to 20 meters of line. Designed in two parts, so it doesn't need supports. Use some glue to assemble it. I've printed it in PETG for a better lasting in sea water. Print…
Scuba box is a very popular box in Europe. It is actually the best waterproof and air tight box that I could find. I live in a tropical island so I needed something really waterproof to protect my filaments. That's why I chose the 45…
Frame diver Explore our hexagonal frame, ideal for hanging on a wall or standing on a piece of furniture with its stand. This decoration features a diver with posidonia lung of the sea. The frame is printed with the wall hanging on the…
Spearfishing Speargun Reel The original model was super vague on assembly instructions and the mount didn’t fit my gun. You can’t resize it because then it wouldn’t mount to the rest of the reel. My mount uses just two zip ties and mounts…
A scuba diver cookie cutter Print Settings Printer: Original Prusa i3 Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20 % Notes: designed for 0.4mm nozzle Category: Kitchen & Dining
Wall hangers for storing your scuba fins. Holes for M3 wood screws. I have included a split version of the hanger for printers with a smaller build plate. Category: Sport & Outdoors
As a ice diver instructor I have a lot of scuba regulators laying around. and no real system on storing them, So I designed and printed this wall mount for DIN regulators so they hang neatly on a row on the wall. Print Settings Printer…
My new pool robot, the Aiper Scuba SE, is already doing a very good job, but the result can be improved by adding filter balls to the suction chamber. There are some suggestions for this on the Internet. Unfortunately, the filter balls…
Just another Dust Cap for DIN Scuba Regulators. Is this better than others out there? Most probably not, i was just bored and tried tinkering with thread tolerances. But, this cap: has less threads than most, so is less annoying to screw…
I had puchased something similar from a dive shop some years ago and ran across it recently and thought to model one up myself. Have printed it several times at various layer heights and after .2 made the threads a little tough to turn I…
I wanted a boot/base that was soft as opposed to the commercially made ones that are mostly made of a hard plastic. This one is designed to fit snugly on a Catalina aluminum 80, 63 or 53 cu. ft. cylinder. All of which have a 7.25" in.…
Designed to take ¼ inch bolts and nuts (I'm in the USA, what can I say) and attach through a treated plank. The straps are 25 mm wide and 1 mm thick nylon. These are designed around my brother's tanks with an 190 mm nominal dimension.…
The best torch handle for technical dives. Material - PETG Nozzle - 0.6mm Layer height - 0.3mm Infill - 60%
Scuba Diving hand real with handle/crank. The crank is removable allowing to just use of just the reel. M3 screws are used to hold two parts of real together - or drill to fit what you have on hand.
As I am switching to sidemount diving (from twin backmounted doubles), I now have the old problem of cylinders sliding around in the trunk of the car. I want to protect the cylinders, and my car, and I wanted something that would…
This handle uses a neck clamp that can be installed without removing the valve and should be sturdy enough for any size of tank - if you print it strong enough. The recommended material would be PETG, but ABS and any other similar…
Scuba box is a very popular box in Europe. It is actually the best waterproof and air tight box that I could find. I live in a tropical island so I needed something really waterproof to protect my filaments. I tried many models of boxes,…
This is a dust cap to be used with any M25x2 valve or air tank. It is highly water resistant thanks to the two TPU seals. the m25x2 thread is the European standard, however if requested i can make it in any other thread. Print…
Just a simple tool that makes inserting a new O-Ring into an inflator quick coupling much easier. The needed O-Ring size is BS610 (6,75x1,78mm). Pull the coupling ring back as if you would when connecting a BCD and insert the pin with…
Scuba tank dust cap with indication whether the tank is full or empty. Just put the cap on the way you need it to be, green in front after filling the tank and red in front after a dive. The cap has a recessed hole at both sides to make…
Diving Break Away Connector For
Scuba diving large spool it can store up to 35m of 1.5mm line.
Basic scuba diving spool ideal for DSMBs It can store up to 15m of 1.5mm line
Underwater Noise Maker for Scuba Diving H2YO clone
These two variants of holders for the long MD hose of a regulator are threaded onto the waist belt of a jacket or harness for diving equipment and hold the long hose of the regulator in place. Diese zwei Varianten von Haltern für den…
A handy dust cap for protecting the DIN inlet of your scuba regulator's first stage from dust and moisture. Can be attached to a string to prevent loss. Note: All regulator caps I printed with PLA for my local scuba group survived a…
My copy of a Finger Reel! printed at around 75% give the right size. i simple file down the two middle surface and glue them together. i use masonry cord and a 2$ double lock snap from the hardware store. total cost around 5$!!! very…
UPDATE: Modified body and cap angle to engage sooner. Remix of very handy line cutter by luboshocc. Rather than a split body, converted to a unibody with a blade cover. My first "remix" was just combining the two halves in the slicer into…
Scuba Teddy bear Teddybear model is from: https://www.printables.com/model/758291-cute-bear Tank and mask are from: https://www.thingiverse.com/thing:5421428 Category: Animals
Dust and water protection for SCUBA tanks
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
Great addition to a second stage regulator when used with a neck leash, as commonly used in technical diving, to keep a regulator around the diver's neck. Especially useful for side-mount diving.
A replacement for the Stanley FatMax logo on the FatMax Mobile (113l). This is especially for scuba divers. In Germany it is known as a "Taucherbox" or "Taucherkiste". You have two options: Use the plate and the diver as one and print it…
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
The bigger one is 1 kg,and the smaller one is 0.5kg. I put two small (2.9mm)holes in the bottom of each model so when you need to take is out on the casting sand/clay you can screw in two m3 screws or some woodscrews for puling “handles”.…
One needs to store scuba gear. One's fins, one's first stage, etc. This is a derivative of an earlier design of mine that was heavily inspired by the excellent work of Joakim Boneng of Norway. This design comprise of four 5/8 DIN200…
After diving, easily protect your equipment with a dust and water cap. Hang it on the wall when you return home.
Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…
Scuba DPV diving scooter lights mount. Scooter tube diameter 20cm (Suex, Cuda ...). Hole diameter for mounting accessories 9mm. Use m8 screw and 50mm harness belt.
This is a 3D-printable mount designed to hold a 7.5 cm (3") round blind spot mirror, commonly sold as automotive accessories. They're waterproof, affordable, and easy to find—ideal for adapting to underwater use. 🔍 Example Mirror:…
To avoid teh entry of dust or any other thing while the tanks is not being using and it has not valve Thread 5/8 GBP
Bungee mount for the Suunto SK8. It is very tightly constructed. But the inner holds very well in it. You have to fiddle a bit to get the whole thing together. If it is too heavy for you, simply increase the scaling in x and y a little.…
This design is based on the excellent "Scuba DIN regulator cap" by wtrow. https://www.thingiverse.com/thing:5192202 I made the cap a little longer on the top in order to make room for an attachment point for some line etc. The V2 is just…
This is just a variation of my " Dust Cap for DIN Scuba Regulators ", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU. Read this before you print or use it: I do not own such a…
Scuba line reel. Printed in carbon fiber ABS from 3dxtech with heat insert threads. I use this for my buoy when I go lake diving at Raystown. Works wonders, as it can hold a ton of line, making deeper diving easier. I put two brass clips…
For some mysterious reason my SCUBA masks strap got ripped - while not even being used! Just like someone's bitten off a part of it, while also stealing one of the foldback clips or whatever they're called. So instead of buying a new one…
Not for direct printing. Use this model as reference for remixing the grip.
This is a dust cap to be used with any 7/8-14 UNF valve or air tank. It is highly water resistant thanks to the two TPU seals. 7/8-14 UNF thread follows the DIN standard, however if requested i can make it in any other thread. Print…
A handy dust cap for protecting the DIN outlet of your scuba tank from dust and moisture. Can be attached to a string to prevent loss. You may use different colors (red/green) to indicate empty and filled tanks or different gases (e.g.…
After watching How To - Make Your Basic Spool Into a Kickass Spool from Safe Diving I wanted to design 30M spool which will allow to easily clip on double ender even after being messy after cold water dive in dry gloves. Printed in 100%…
Dust caps/plugs for the high and low pressure ports of scuba regulators. These are for regulator storage/transport only, there's no provision for any O-rings and don't expect these to withstand actual cylinder pressure! The thread part…
Weight Keeper for Scuba or Freediving Weight Belt I recreated this weight keeper to closely match the ones from Hog or Edge. I know they only cost around a dollar a piece, but for a few cents worth of plastic, you can also save a trip to…
Scuba bear Bear model is from: https://www.thingiverse.com/thing:182072 Tank and mask are from: https://www.thingiverse.com/thing:5421428 Category: Animals
This is a scuba diver costume for kids from 2 to 5 years old. You will need two PET bottles (milk, water or similar) for the air tanks. I also used some old harness parts and buckles form an old bag and coarrugated tube. A diver computer…
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
Divers with double or side mount rig are frequently using pulleys, so called miller carts, to carry their tanks. I modelled a holder for AL80CU tanks for my rig. I also enclosed the Fusion 360 files with the parametric design so one can…
![Scuba diver [OLD VERSION]](https://media.printables.com/media/prints/762079/images/5938852_a3a16ea1-064b-40fd-8cd9-3b230b90ccc7_76b5d0b5-da2b-4f98-9f3f-544cd67d90ea/large_display_pxl_20210726_070126328.webp)
![[V2] TankLink: Your Modular Scuba Tank Holder](https://media.printables.com/media/prints/1107307/images/8367429_7e159193-3de8-4c8f-acf3-7909c09eda2f_55613600-6a71-4dd5-a436-e10cf06ebf3e/img_9085.jpg)
