P
PrintablesExLoop
Servo horn round for 55G Servo (25T spline)
This is a round servo horn for a 55G Servo with 4 M3 holes.
- Pobrania
- 2149
- Polubienia
- 46
- Ocena
- 4
Wyniki wyszukiwania: spline
Liczymy pasujące modele…
P
PrintablesShahbaz Fazal
Bambu Labs Splined Spool (and ReSpooling spool)
Wanted to reduce the amount of filament used compared to the hex version. wanted to be able to see the amount of filament remaining, a space for the filament sticker, and an “attractive“ design, something a little different. managed to…
- Pobrania
- 889
- Polubienia
- 115
- Ocena
- 4,62
P
PrintablesExtrutim
Vase #2 Spline Based | Vase Mode
I was just playing around a bit with splines in Fusion, this is what came out! Print it in vase mode. If you like check out my other designs too!
- Pobrania
- 531
- Polubienia
- 130
- Ocena
- 5
P
PrintablesRobert Bieber
Table Saw Spline Jig
This is a simple spline jig for table saws. It comes in two sizes, 200mm width which should fit on most desktop printers and 300mm which is suitable for bigger printers. The FreeCAD file is included and should allow you to customize the…
- Pobrania
- 438
- Polubienia
- 100
- Ocena
- 0
P
PrintablesMattStultz
Spline Jig For Dewalt Biscuit Joiner
Easily add splines to your mitered joints such as picture frames with this jig. This project was inspired by a video by David Picciuto and I wanted to help improve upon his "least favorite method" for adding splines (…
- Pobrania
- 398
- Polubienia
- 86
- Ocena
- 5
P
Printablesnathanmfast
Bambu Labs Reusable Spool (Splined)
WARNING After using these for some time it has become clear that the sides are too flimsy - as the spool turns you can get filament stuck down the sides. I've had several prints that were very painful to finish because they repeatedly…
- Pobrania
- 378
- Polubienia
- 49
- Ocena
- 5
P
PrintablesSteveW91
Flyscreen Spline Roller
A Spline roller for installation of flyscreening. Requires a single M4*30 bolt and nut. No supports required. Category: Household
- Pobrania
- 308
- Polubienia
- 29
- Ocena
- 5
P
PrintablesPaul Osborn
Remix Ender 3 V3 SE upper gantry cable guide with cable spline
I used tinkercad https://www.tinkercad.com/things/jBSvvRhF06K-ender-upper-gantry-cable-guide-with-cable-spline to add a cable spine to the Upper Gantry Cable Guide v3 when combined with the Ender 3 V3 SE Spine cable Clamp to Spine…
- Pobrania
- 293
- Polubienia
- 34
- Ocena
- 5
P
PrintablesRPI
Carburetor tool splined
This is a great tool but had to make a small change to fit my carburetor
- Pobrania
- 264
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDoug
Spiral Spline Planter
Planter.stl is 95mm deep and the opening is 103.5 mm across. Planter V2.stl, Slightly larger and redesigned to work in spiral vase mode by adding a chamfer at the spline interfaces. Rescale to your needs. Inspired by the Japan Pot by…
- Pobrania
- 252
- Polubienia
- 62
- Ocena
- 0
P
Printablesnexusz
12 Spline Bike Freewheel Removal Tool for 21mm socket
I originally printed the source model but didn't have a 30mm socket to use with it. I had to resort to using a adjustable crescent wrench. Unfortunately the wrench just slipped as the plastic was elongating out the open end of the wrench.…
- Pobrania
- 229
- Polubienia
- 17
- Ocena
- 5
P
PrintablesWRotter
BMW 116d Clutch Alignment Tool (B37, 22 spline)
I'm changing DMF and clutch on BMW 116d. Changing DMF and clutch requires clutch aligning tool so the clutch end up in the center of the flywheel when mounting. Since this will be one time use and not a complicated geometry I made one…
- Pobrania
- 188
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBrian Berkley
Mr. Bulletfeeder Controller Mount for Dillon 1050/1100 SPLINED
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
- Pobrania
- 181
- Polubienia
- 17
- Ocena
- 4
P
Printableskamicavi
Shimano HyperGlide Spacer and Spline Profile
Lost those little fiddly plastic spacers for your sprockets? Never fear! Don't despair, whip up some plastic joy with your machine at home and get back on your bike. I used the engineering drawing from…
- Pobrania
- 171
- Polubienia
- 24
- Ocena
- 5
P
PrintablesPreppen
Prusa Mini, knob with splines
I made an IMO more elegant splines/knurled knob design. 25 mm diameter Printed at 0,10 mm LH and 15% infill.
- Pobrania
- 167
- Polubienia
- 28
- Ocena
- 5
P
Printablesminiellipse
Hitec HS-80 servo horn with 24T spline
Another servo horn but my Prusa can print the splines. 24 tooth spline. Make sure you size it so it fits tight. Category: R/C Vehicles
- Pobrania
- 131
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGrandpa 3DPrints
Star Spline Vase 8
Here's a unique vase that looks somewhat glitched! Vase mode Print Settings: 1 perimeter, 0 infill, 3-4 bottom layers, 0 top layers, no supports, default outer perimeter width (There are no steep overhangs, so there is no need to increase…
- Pobrania
- 119
- Polubienia
- 47
- Ocena
- 5
P
PrintablesJaxal1
Spline jig for trim/palm router
Fits trim routers with a 2-inch radius or 4-inch square base. If yours is a little bigger or smaller, scaling is straightforward. Affix using clamps or double-sided tape before routing.
- Pobrania
- 112
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPeterLandin
Parametric servo Spline
45g Print instructions Category: R/C Vehicles Summary 45g
- Pobrania
- 106
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGemmi
Frame Spline Jig
Simple and adjustable table saw Spline Jig. All you need to have is V-Slot 2060 and some m5 screws. Designed to print without support. Cheers!
- Pobrania
- 106
- Polubienia
- 41
- Ocena
- 0
P
Printablesu01pei
3dsets Buggy motor spline
The motor I purchased did not fit the spline that came with the Buggy print files, so designed a new one. Spline is 22mm tall with base. Spline length itself is 17mm. The 3 holes are equally spaced.
- Pobrania
- 103
- Polubienia
- 28
- Ocena
- 5
P
PrintablesNeilR
Spline jig for picture frame, strengthen those corners!
Simple tool to aid in cutting accurate and repeatable spline grooves in the corners of picture frames. Print at 50% infill or more for greater strength. I used PLA but others will work. When using this jig I recommend using a clamp to…
- Pobrania
- 100
- Polubienia
- 19
- Ocena
- 5
P
PrintablesJamie
Servo Spline Maker
Note: you will need to use the customizer for this to be useful. (Or use the OpenSCAD model directly) Think a 3D printer lacks the resolution to print splines to fit on an RC servo? Think again! This customizer generates a test plate with…
- Pobrania
- 100
- Polubienia
- 7
- Ocena
- 0
P
PrintablesNotLikeALeafOnTheWind
Servo drum for a t25 spline - 35mm
A cord take up drum for a continues rotation servo with a t25 spline. Print instructions Unassociated tags: servo drum, servo horn, servo hub Category: Robotics Summary A cord take up drum for a continues rotation servo with a t25 spline.…
- Pobrania
- 94
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJeffL
10 Spline Jeep Manual Transmission Clutch Alignment tool
Jeep 3.7L Manual Transmission Clutch Alignment tool with 10 splines. ABS filament 4 Perimeters (vertical shells) 30% infill no supports required
- Pobrania
- 91
- Polubienia
- 17
- Ocena
- 0
P
PrintablesDouglas Slingerland
Sentro 48 Knitting Machine - Heavy Duty Replacement Gear & Spline Handle
A redesigned, reinforced replacement gear and crank handle for the Sentro 48 Knitting machine. If your stock gear is skipping, stripped, or making grinding noises, this upgrade replaces the weak stock connection with a robust 8-point…
- Pobrania
- 89
- Polubienia
- 13
- Ocena
- 0
P
PrintablesLeo
50mm blades for electric motor cooling fan with 6mm splined shaft 10 blades/8 blade
Comes in two variants: 8 blades, 10 blades Blender source file included
- Pobrania
- 87
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTom
Spline Tablet Stand
A simple, sturdy and stylish stand for tablets up to about 10" Design file: https://cad.onshape.com/documents/4d07891d05f48400b2a73829/w/ead10e9240af9c3ec123d335/e/a36ef43e9ad6f989836475f4 Here's how I designed it:…
- Pobrania
- 86
- Polubienia
- 17
- Ocena
- 5
P
PrintablesKnurbine
Toyota Truck Dash Dimmer Knob for Splined Shaft
This is a replacement dash lights dimmer knob for 1st generation Toyota Tacoma, 4Runner, T100, and many other vehicles. Specifically, this dimmer knob is adapted to a modern ¼" splined shaft potentiometer, as found in electronic dimmer…
- Pobrania
- 82
- Polubienia
- 7
- Ocena
- 0
P
PrintablesLapjoint
Spline-Based Boomerang in FreeCAD
This is pretty similar to the Red Oak design, although I made it from scratch. This one was created in FreeCAD 0.19, though. The model basically consists of two spline loops for the top and bottom faces of the boomerang ("periodic…
- Pobrania
- 82
- Polubienia
- 4
- Ocena
- 0
P
PrintablesVladimir Adevărat
BMW Clutch Alignment Tool (15mm Pilot / 10 Spline)
BMW E46 320d Clutch Alignment Tool This is a custom clutch alignment tool specifically designed for the BMW E46 320d (136hp, M47 engine). It ensures the clutch disc is perfectly centered with the pilot bearing in the flywheel, making the…
- Pobrania
- 81
- Polubienia
- 5
- Ocena
- 0
P
PrintablesShreesh Khadka
Spline Vase
Printed in ABS (color: black) and PLA (color: red), using vase mode (or corkscrew mode) Single outer layer 0.2mm layer height 0.4mm nozzle 3 bottom layers 0% infill No top layer No part cooling fan, supports or raft required
- Pobrania
- 80
- Polubienia
- 14
- Ocena
- 4,75
P
PrintablesNiran van den Ende
Audi / VAG 28-Spline Clutch Alignment Tool
I made this tool after replacing the clutch on my Audi and not finding a clearly correct printable alignment tool for this clutch family. This model is intended to center the clutch disc during installation and is based on the 28-spline…
- Pobrania
- 76
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBuildByAnyMeans
Spline Cutting Jig – Dual Version (Extrusion or Fully Printable)
🧩 General Overview This jig is designed to make cutting splines safe and repeatable on a table saw or router table. It holds your workpiece at a fixed 90° angle and glides smoothly across your tabletop. The design supports two build…
- Pobrania
- 67
- Polubienia
- 15
- Ocena
- 0
P
PrintablesEric F
FRC Falcon spline to hex shaft.
Print at 101% and 100% infill
- Pobrania
- 61
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNkalliotie
SRAM GXP BB splined dust cover
I lost my own somehow so I made a new one. Installed tapered side towards the bearing. If it's too thick, just don't print a few of the layers.
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTed Cooper
Splined shaft water faucet handle 20 teeth
Print using a 0.2mm nozzle, 0.4mm nozzle will not fit because of the detail of the teeth. Print with at least 3 walls because the teeth section need to be strong. I made the top to be secured with an M4 hex nut. This is to replace the…
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBig Guy Enterprises
goBilda 312 RPM to 6000 RPM Converter for FTC (17 tooth spline mount)
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels. Print no supports, should be a snug fit. To install- remove 8 screws and take off black gearbox cover. Remove all the…
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLapjoint
Remixed Spline-Based Boomerang in FreeCAD
This is a remixed version of my previous design in FreeCAD . I literally just dragged around some control points along the wings. This new shape looks a little more dynamic (for lack of a better word) to me. It is a nice flyer for…
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNotLikeALeafOnTheWind
Servo drum for a t25 spline - 35mm
A cord take up drum for a continues rotation servo with a t25 spline. Print instructions Unassociated tags: servo drum, servo horn, servo hub Category: Robotics Summary A cord take up drum for a continues rotation servo with a t25 spline.…
- Pobrania
- 49
- Polubienia
- 3
- Ocena
- 0
P
Printablesatomicalex
24 spline clutch tool for BRZ/FRS/86
Clutch discs have to be centered in the pressure plate when you mount up the clutchpack. This tool allows you to center your clutch disc easily by inserting it into the clutch disc, then inserting the tool nose into the flywheel bearing.…
- Pobrania
- 48
- Polubienia
- 6
- Ocena
- 0
P
Printablesluq0
AR Giulia 2.0 RDU LSD spline shaft - 1/2 square adapter
Adapter which can be used to test LSD preload.
- Pobrania
- 44
- Polubienia
- 1
- Ocena
- 0
P
PrintablesThe Sloppy Apprentice
LEGO WINCH DRUM SIDE FOR 4 SPLINE AXLE
Slap two sides on 4 spline axle, thread a string and you have a winch drum that is lego compatible SHARE LIKE COMMENT TIP - POST A MAKE My other designs https://www.thingiverse.com/thesloppyapprentice/designs…
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTheAbidingOne
Spline Skulpture
This is an endless skulpturish-ringish-thing?! The area / profile of the path is a hexagon Care with adhesion at the bed. You may have to decrease the Z-Position to dunk the model into the bed to reduce overhang. (its up to your printer)…
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesIan Foulds
Spline and whales for drawing smooth contours.
This a small version of the classic spline and whales design for drafting smooth contours. I made the Whales actually whales and magnetic for good holding power. (normally they are large lead weights). The design uses 15mm diameter…
- Pobrania
- 40
- Polubienia
- 29
- Ocena
- 0
P
Printablesmcorri
Roomba Side Brush (Spline fitting)
After trying the original model and finding that my TPU filament was unable to hold together after a few months in use, I decided to modify the model to make it more thicker in a few areas, and also using the my spline fitting upgrade…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
Printablesmdm_bitr
12-spline cassette lockring tool / fork air spring topcap tool — 3/8 in drive
I needed this tool to remove the air spring topcap from my Fox 32mm TC (taper cast) fork and install more volume tokens. It should also be compatible with other forks using the 12-spline cassette tool standard as the original creator…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFekete Áron
faucet handle spline insert (drehknopf)
I recomand a 0.2 mm noozle for the small details and PET-G for the flexibility. I've made it because the one in our faucet has been eaten away and we couldn't close it properly and we needed one but fast, so I designed it in Fusion and…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLucas Moreira
Spline Cable Organizer for Stand-up Desks
Spline Cable Organizer for Stand-up Desks Keep your cables neat and organized with this custom 3D-printed cable management solution! This cable organizer features a modular, spine-like design made up of two main parts: Anchor Link Piece –…
- Pobrania
- 33
- Polubienia
- 14
- Ocena
- 0
P
PrintablesLapjoint
Spline-Based Boomerang in FreeCAD 1.2
Recent versions of FreeCAD have made huge improvements in terms of usability. While I found 1.1 to be difficult for the operations needed for boomerangs – e.g., fillets on lofted bodies – the 1.2 dev version looks much better in that…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
Printableshollebread
MEGASPLINE: XL mag release for SillyButt's Alchemist blaster
Extends original Alchemist mag release into a knuckleduster type monstrosity. As of 7/19/23 has not been game tested so use at your own risk. Vigorous shaking with Talon mag inserted did not lead to any unscheduled mag drops so should be…
- Pobrania
- 33
- Polubienia
- 11
- Ocena
- 0
P
Printablesdick doc
Silcock Handle (for 16 point splined stem)
Had a gate valve handle crumble into pieces and other spare parts didnt fit the splined stem so I tried buying one from local hardware shop for a couple buck but still, that did not fit due to the number of teeth … So i just deceided to…
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDaTryhard22
Lexivon Triple Square Spline Socket Set Holder
A simple socket holder for 10-piece Lexivon triple square socket set. I needed something smaller than the original folding box to gain space back in my toolbox drawer. Printed in PLA without supports. Amazon link to purchase socket set:…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
Printablesvidision
Tapered Guitar Control Knob - CTS 24 spline WIP
CAUTION: This print is very sensitive to materials and print settings. If the fit is tight, do NOT force it onto the post and risk damaging your pot control. It's a small print, so better to tweak settings and try again! Very small resize…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printablesvidision
Round Guitar Control Knob - CTS 24 spline WIP
CAUTION: This print is very sensitive to materials and print settings. If the fit is tight, do NOT force it onto the post and risk damaging your pot control. It's a small print, so better to tweak settings and try again! Very small resize…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJeff
5 ring spline for Stencil Book
I designed and printed this with PLA, 0.2 layer height with a 0.4 nozzle and used minimal supports at 20 degree Organic. This is intended for the Ring frame only, and not the Binder frame. I also added a larger, oval ring set to allow for…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
Printablespirategoosecatch
0.75 inch diameter 36 tooth center spline shaft proto v2
Simple 0.75 inch in diameter and 0.5 inch long spline shaft with a total main shaft length of 2in. Built to attach 84-94 GMC wheel to a Moza quick release. It has a 36t spline shaft. The spline is 0.5 in long designed to fit into a 84-94…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRuiaxe
Vase with Embossed Splines
Hey there, I know there are already a ton of vase models out there, but I wanted to share my latest creation with you. I tried something new by adding a curve shaped emboss on top of a spline curved vase, and I gotta say, it looks pretty…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
Printablesmoofie
Lockring Spline Tool for Stan’s Neo Ultimate Lefty 50 Hub
Note that the lock ring is left hand threaded.
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
Printablesvidision
Spiral Pentagon Guitar Knob - CTS 24 spline WIP
This print is very sensitive to materials and print settings. If the fit is tight, do NOT force it onto the post and risk damaging your pot control. It's a small print, so better to tweak settings and try again! Very small resize or hole…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline Extrusion Wire Guard
Wire guard for running wire through VEX MAXSpline Extrusion
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDenbot
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline Extrusion Wire Guard w/ Hole
Wire guard with a hole cut in the center for running wire through the center of the VEX MAXSpline extrusion
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
Printablespirategoosecatch
0.75 inch diameter 36 tooth center spline shaft proto v1
Simple 0.75 inch in diameter and 1.25 inch long spline shaft built to attach 84-94 GMC wheel to a Moza quick release
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDavidP730
Corolla EPS Steering Angle Sensor Spline mount
The spline mount should be printed with the hole in the middle slightly smaller than the diameter of the splines on the shaft of the corolla EPS motor. This will ensure the splines cut into the print so it can turn the steering angle…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printables2Wired
R5 MAXSpline to Hex Shaft Endcap
Endcap for the VEX MAXSpline tube, that centers hexshaft for encoder use
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFredrik S
Box for Teng Tools Spline bit XZN 12
I crafted a containment unit for the elusive TengTools Spline Bit XZN-12 (measuring 12mm x 100mm) to thwart its vanishing acts, ensuring it doesn't pull a Houdini on me. You will need two M3x20 bolts for the hinges and superglue for the…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJaroslav Knespl
Spline Profile Adapter for Special Brass Couplings
This adapter has been specially designed to convert the unique spline inner profiles of brass couplings to a standard hex profile, allowing the use of conventional tools without the need for a specialized key. The adapter easily inserts…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
Printablesp4trick
End Cap for "DT Swiss Ratchet LN Shimano Microspline"
The end cap (Endkappe) is e.g. part of HWYABM00S3765S Recommended print settings: Infill: 100% Support: enabled (on build plate only) PETG Layer heigth: 0.1 - 0.2 mm
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMartijn Demeulemeester
Spline socket (1/2") tray with cover
I bought a 1/2" spline socket set but it came with a cheap plastic tray so I modeled a sturdier tray with it's accompanying cover to house the sockets. Socket sizes M10-M18
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJakob Andersson
Modern Teapot – Free STL | Designed in Fusion with T-Splines
This teapot is a modern, sculptural design created entirely by me in Autodesk Fusion , using T-Splines to achieve smooth, organic surfaces and elegant curves. The result is a teapot that combines functional form with a minimalist,…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSzymon Wesołowski
Organic Spline Planter & Vase
Elevate your home or office decor with this sophisticated spline planter. Featuring a fluid, organic silhouette, this model is designed to blend modern aesthetics with functional 3D printing. The undulating curves create a beautiful play…
- Pobrania
- 9
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKean
Sieg X3 spindle spline lock
HM's SX3 spline lock does not fit the original Sieg X3 because the motor mount and e-stop are in a different location on the X3. My mill is the Grizzly variant of the Sieg X3, model number G0463 Hackery ahead: I used OpenSCAD to remove…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGotCoffee88
Pressure Washer Hose Wrench (15-spline hose, 1.25" OD)
For some reason, pressure washer hoses like to bind due to brass corrosion, crap in the threads, or residual pressure in the lines. On top of that, when you hands are wet, uncrewing the hose is a major task. Instead of breaking out the…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesbolauxniaises
sealing washer for freewheel microspline endcap (Mavic DtSwiss etc ..)
Custom Endcap Adapter freewheel with "142mm Light" axles when converting to Shimano Micro Spline 12s freehub. The Issue: Standard 12x142mm endcaps often have a large flange that interferes with the Micro Spline Lockring, causing either…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJakob Andersson
3d print test of T-spline design
Just a test if it can be printed some complex t splione design.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSzymon Wesołowski
Minimalist Spline Flow Vase
Bring a touch of contemporary elegance to your home with the Spline Flow Vase. This model is a masterclass in organic geometry, utilizing smooth spline curves to create a silhouette that feels both natural and high-tech. Its continuous…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesINVENTOR 55
Škoda Felicia Steering Wheel Adapter – Spline Hub to M10 Threaded Rod
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJC ML
Freewheel tool for 8 splines
Freewheel tool for 8 spline freewheel on bmx/ singelspeed bikes. Needs a harder filament to work. CF PLA is to brittle. Maybe ABS, petg cf or similar will work, gave up on making it work since i only have. Pla and cf pla. tool fits…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWebcae.com
Spline Shaft & Hub Assemblies — 3 STEP Sizes | WebCAE
Standard medium-series straight-sided spline shaft and hub assembly according to GOST 1139-81 with major diameter centering. Стандартизированное соединение прямобочного шлицевого вала и втулки средней серии по ГОСТ 1139-81 с…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPatE
Fisher Paykel Spline Driven - 479318P
Fisher Paykel Spline Driven - 425080 or part of kit 479318P. Half of the dog clutch in the center of the was basket. Needs to be printed out of something tough,like PC-GF in my case, but PA6, PA12 etc should work as well. For PC-GF I used…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
faucet handle spline insert (drehknopf)
I recomand a 0.2 mm noozle for the small details and PET-G for the flexibility. I've made it because the one in our faucet has been eaten away and we couldn't close it properly and we needed one but fast, so I designed it in Fusion and…
P
Printables
Organic Spline Vase - Elegant Wavy Design
This elegant vase features a flowing, organic design created with smooth spline curves, making it a sophisticated centerpiece for any modern interior. It is specifically optimized for "Vase Mode" (Spiral Vase) printing to ensure a…
P
Printables
Organic Spline Planter & Vase
Elevate your home or office decor with this sophisticated spline planter. Featuring a fluid, organic silhouette, this model is designed to blend modern aesthetics with functional 3D printing. The undulating curves create a beautiful play…
P
Printables
Minimalist Spline Flow Vase
Bring a touch of contemporary elegance to your home with the Spline Flow Vase. This model is a masterclass in organic geometry, utilizing smooth spline curves to create a silhouette that feels both natural and high-tech. Its continuous…
P
Printables
Škoda Felicia Steering Wheel Adapter – Spline Hub to M10 Threaded Rod
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
P
Printables
Spline Profile Adapter for Special Brass Couplings
This adapter has been specially designed to convert the unique spline inner profiles of brass couplings to a standard hex profile, allowing the use of conventional tools without the need for a specialized key. The adapter easily inserts…
P
Printables
28mm Spline Wrench
I needed a 28mm spline wrench for my milling machine. So, I decided to make one from PLA so that it would break if I forgot to remove it from the drawbar splines. I printed this as a test with just 15% infill and it was pretty strong. If…
P
Printables
MAXSpline and SplineXL bearing shims
SplineXL tubes are notoriously loose in bearings due to the rounded crown of the tube. This provides little surface area to ride on the bearing. MAXSpline is slightly better, but can use some help on occasion. These tubes are 1 way…
P
Printables
Washer Dryer Spline Knob
I decided to add a switch to the dryer portion of this laundry center and introduce a ringing belle as an alternate to the default buzzer; used to signal the end of cycle. Rotary switch has a spline shaft, but all laundry style knob…
P
Printables
Spline Jig
The DustDog Spline Jig makes it easy to cut splines into your box corners, adding both strength and a decorative touch to your projects. Designed for precision and repeatability, it helps you achieve clean, professional results every…
P
Printables
X spline jig
watch the reel tutorial to understand how to work this jig. https://www.instagram.com/p/DQSwpmojqSs/
P
Printables
VCT Tools 12pc Spline Socket Holder
Minimal holder for the VCT Tools 12pc Spline Socket socket set. https://www.amazon.com/VCT-Universal-Spline-Socket-Metric/dp/B085J374XK Print in TPU with larger sockets on bed for minimal tree supports.
P
Printables
Shimano Microspline Cassette holder
Simple print to store your Shimano Microspline Cassette
P
Printables
Stronger Roomba Side Brush with Spline Fitting
After trying the original model and finding that my TPU filament was unable to hold together after a few months in use, I decided to modify the model to make it thicker in a few areas, and also using the my spline fitting upgrade model.…
P
Printables
Spline Chain Cable Organizer - Skadis Hook Spline
Cable Management Spline Skadis Hook modded.
P
Printables
Organic Spline Vase - Elegant Wavy Design
This elegant vase features a flowing, organic design created with smooth spline curves, making it a sophisticated centerpiece for any modern interior. It is specifically optimized for "Vase Mode" (Spiral Vase) printing to ensure a…