615 modeli
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…
An unofficial wall arm mount for the Ubiquiti Unifi U6 Enterprise, U6 Pro, U7 Pro Max and U7 Pro. The holes on the arm align themselves with the holes marked with “A” in the metal face plate “U-PRO-MP”. I've also shared the .step file if…
Simple stand originally designed for a Ubiquiti UniFi AP AC Pro Also confirmed to work with: UniFi Access Point WiFi 6 Pro U6-LR-US Possibly others? If it works on other models drop a comment and let me know! Snap fits into existing holes…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press the a little so they can compress and enter the mount, after…
The Cloud Gateway Max gets hot! Do not print in PLA!
Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
Just a rescale of the OG model to fit the UP 6 pro mounting bracket holes—they lined up perfectly and secured easy with short M3 screws. + nuts.
I am using it with U6-Pro, but should also work with AP AC Pro. Instead of snap fits to attach a backplate this remix has 4mm holes so screws can be used to attach a backplate. Added also version with longer stand to fit U7-Pro AP as it…
A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini. I have included two versions of this mount: For two USW-Flex-Minis For a single USW-Flex-Mini To install your switch to this mount, simply slide it in. But once you reach the…
I really liked this design but it was for the G3 Instant Camera and I have G4 Instant camera's.. Not sure why Ubiquiti decided to change the mounts ever so slightly but because of that the G4 can't use G3 mounts. So this is a remix of the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and…
Hello Everyone I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
This is a key that inserts into the top of a Ubiquiti Networks UniFi AP to allow it to be removed from its wall mount. Insert into the slot on the top edge of the access point and twist left about 1/8 of a turn. The taper should be toward…
This is a reupload from https://www.thingiverse.com/thing:5572539 which is itself a reupload from a different website. Credit to thatguy_ie on Thingiverse and Crosstalk Solutions on youtube for bringing it to my attention originally.…
This is a stable desktop stand designed for the Ubiquiti U7 Pro XG access point. Compatible with any AP using the Flagship AP Replacement Mounting System (SKU: U-PRO-MP), up to approximately 206 mm in diameter. Updates in V2: Reduced size…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
The switch is flat on top but is tapered on front bottom edge. As a result, two versions of the bracket are supplied. The standard mount is for a shelf mount. There is an inverted version that is better for mounting to a wall, hanging…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL In my old installation, I used a wifi access point on a shelf at the same time as a switch. Since ubiquiti doesn't offer this option and I don't want to…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
Desk stand for Ubiquiti's Unifi 6 Lite access point. 15-20% infill 0.2 layer height
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
A simple stand for a UAP AC Lite or a Nano HD since both use the small mounting bracket. Print instructions Print it laying on its side.
The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
UK: Google Translate Bracket for Ubiquiti USW-Flex-Mini 5 Port Switch The bracket is centered both ways, so that the holder and locks can be welded firmly, but no more than it can be easily clicked out again, and at the same time it is…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
This is a corner mount for the Ubiquiti Unifi U6-Mesh (and UAP-Flex-HD) access point. We needed to mount a UAP Flex externally, and wanted to get the best possible coverage by using an outward corner, so remixed the referenced models to…
I wanted to create a simple clip-type wall mount for my Ubiquiti Flex Mini network switches. I have them installed in walls and under the table. The Flex Mini has a very rubbery bottom patch which keeps it in place without any additional…
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
This model clips into the existing quick snap fittings for the Unifi Protect G4 Instant and allows the camera to be angled downwards more than the existing swivel arm allows. The angle of this model is 45 degrees downward. The connector…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These are easy to lose and break. I lost mine, then found it again and used it as inspiration to design this replacement from scratch. This slides on and fits perfectly in my test print, just tight enough, and also the screw…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Ubiquiti U6+, U6 Lite and AC Lite UFO stand
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
Das ist ein Case für die Montage einer Ubiquiti UniFi IN-WALL - UAP-AC-IW Damit kann die UAP-AC-IW einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…
Simple wall mount adapter for the Ubiquiti Flex Mini 5 port switch. This can be used with cables coming out of the top or the bottom. Affixes easily with common drywall anchors or 3M adhesive strips.
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
Added holes for U6+ mounting bracket and added additional cable routing options.
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
Description UK: Google Translate Bracket for Ubiquiti UniFi UX Express The bracket that locks the Ubiquiti UniFi UX Express firmly, however, no more than it can easily be clicked out again, and at the same time it is possible to change…
Model of an original wall-mounting bracket, that comes with the PoE-injector for a UniFi AP AC Lite. Might be compatible with other UniFi PoE-injectors. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: Yes Resolution: 0.28 mm…
I re-made this model to be able to adjust the Nanostation even more then the previous model. A wider range to be able to point the Nanostation makes it easier to mount it to the wall one time and not have to worry about it again. Printed…
Wall bracket for Unifi Flex Mini.
This adapter enables mounting of the G4 Instant in a corner. The original mount is attached to the adapter using 2 pcs of thread-forming screws with dimension B3x10. There is space behind the adapter for cable routing. Print the model…
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Bought an AP-LR which didn't come with a bracket, so here is one. Category: Computer
This is wall mount for the FlexHD. There's a pair of holes to screw into a wall and a slot for a ziptie to secure the unit. Ethernet comes in from the bottom, which should help with rain exposure. I print this vertically without supports.…
Spacer that allows me to mount my UniFi switch on a full width rack. Print instructions Printed using Slic3r defaults for .2mm Generic PLA.
The In Wall Access Point from Ubiquiti is the perfect Access Point for my Media Center in the Living Room. The integrated switch will connect my TV, Apple TV and my Playstation, Wifi 6 is supporting my wireless devices. As I don't have…
UFO-style stand for the Unifii U7 Pro XGS access point. Both standard and skeletonized designs. The design with cut-outs may help with airflow heat dissipation. I'm not sure if this will fit the other AP models, but it should be good for…
Unifi USW Flex Mini Switch Stand for fixed pad Stojánek na Unifi USW Flex Mini Switch
Most mounts I could find for the Cloud Key Gen2 variant involve two brackets, both of which are screwed down. I want to be able to remove the cloud key without the use of a screwdriver and with as few holes drilled into my walls as…
This design uses metal rack ears and heatset inserts to make a more durable Rack Mount for the USW Pro max 16 PoE. The Right side PSU files for the PSU can be mirrored and installed on the left if youd perfer the ports to line up with…
I wanted to mount my U6+ to the wall - but in a horizontal orientation. So I designed this thing. It will be mountable with all included hardware from the U6+.
This is a remix of Kai's Octagon Box Mount merged with hadigar's U6 Lite replacement mounting plate. Simplifies CamS' solution into a single printed item (no additional screw required). The standoffs for the octagon box have been removed…
This mounting bracket enables installing a UAP-Flex onto any 90-degree corner. The holes where the Unifi-provided mount attaches to the 3D-printed mount were sized to allow for the provided screws to be self-tapped. Enjoy! P.S: Sorry…
This is wall mount for all Ubiquiti UniFi AP, Lite, Pro and Long range. (for big mounting plate with 3 or 4 screws and small mounting plate) this mount fits to newer APs with blue light. There is wall mount and corner mount version.…
Ceiling mount compatible with most of the Ubiquiti access points. Print instructions In addition to the printed parts you will also need: 1x M6 screw (to attach the mount to the ceiling) 3-4x M3 screws with nuts (to attach the mount to…
Simple wall mount for a UniFi power brick / PSU. For a brick that's 75x75x30 mm. Inspired by the linked remix mount, but wanted to add a through-hole so you can mount the brick in any orientation, including with the big cable through the…
Stand for G3 Instant camera, fits with wallclip and cable.
I couldn't find a Unifi G5 Turret Ultra under eve mount anywhere online, so I decided to make one myself. The holes on the printed mount line up with the base of the camera. You will need to trim the 6/32 screws down to about 6mm using…
I wanted to route the cables for this ( https://www.ubnt.com/unifi-switching/unifi-switch-8/ ) switch underneath. And designed a stand to do so...have fun Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer:…
Cradle to mount the Ubiquiti 8 Port PoE Switch replacing the mount provided by Ubiquiti. Also the Cradle to for the Power Supply is included. Filament: PETG Supports: Not Needed
Ubiquiti G4 Instant camera mounting plate replacement.
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
A modular 19-inch rack-mount adapter for the Ubiquiti Unifi USW-Ultra. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
Printed in black ASA. This is the angle 25 version. I deepened the area for the Ethernet connector, so I didn’t need to cut a large rectangle like they show in their instructions. A smaller hole for the Ethernet cable can be used instead.…
Simple horizontal (preferred orientation for the stronger signal coverage) stand for a Ubiquiti UniFi AP AC Pro. Bonus: reminiscent of a pizza saver (pizza table). No screws or glue required. I designed this to lift my access point off of…
The model shown here has been remixed from the excellent "Ubiquiti Unifi AP Mount" made by "ThePhilStrongProject" on Thingiverse. This version of their model is made specifically to fit the Ubiquity UNIFI Access Point model “UAP-PRO”. I…
This 1-gang wall plate is compatible with the following Ubiquiti model cameras and APs. FlexHD AP U6 Mesh AP G3-Flex Camera G5-Flex Camera
Ubiquiti UFO. Migrating old models from youmagine. freecad > slic3r > prusa i3 mk2
There are three supplied mounts. A front version for typical shelf mounting and another that allows inverted mounting which might be useful on a wall or under a shelf. The difference is the location of the window that allows a view of the…
Remix to better fit the U6 Pro Access Point
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
My neighbor was redoing their house and tasked me with designing a bunch of Ubiquiti adapter/mounting plates. This is one of them… For use with the smaller Ubiquiti AP's. Requires support to print and may need sanding depending on how…
I took the existing model and added a hole that fits the USB-C power connector and a keystone jack to clean up how it looks in my rack. Keystone is very useful for passing Ethernet back to another device, in my case my Eero router that's…
Small stand for Unifi wifi 6 lite accesspoint for vertical (temporary) placement. simply use pair (or 4) nuts&bolts to assemble
1U rack mount for for the Unifi PoE++ 10G injector. The 19-inch version comes in two halves, which allows 1-6 injectors per rack unit. The 10-inch version is a singular piece, which allows for 1-3 injectors per rack unit. There are also…
PETG or ABS recommended for outdoor application. Mount the unifi with the cable coming out the side
Over the summer I ran about 1000ft of CAT6 cable for my surveillance cameras and network drops to all bedrooms. My network was lacking before so at the same time I made the switch to an entire Ubiquiti managed network system. Since most…
I recently purchased a new Ubiquiti Edgerouter for my home network, and couldn't find a rack mounting solution. This is what I came up with to solve the problem. v0.1 my first attempt needed some filing to fit the front plate of the…
The bridges are now 40mm instead of 140mm which was never a problem for my Prusa i3 or MK4. I normally print them with PETG (Cloud Keys can get very hot) in 0.3 draft mode with 15% InFill and never had any problems.
Remix of original file to fit a 10 inch half rack. Enlarged front opening from 148mm to 151mm so all text and led could be seen from the front. The Ubiquiti Switch Lite 16 PoE spec states 44mm in height, but I think I remember measuring…
Mount aligns with OEM screw holes in UVC-G3-Flex-PWM-WT mounting kit for Ubiquiti Unifi Protect UVC G3 Flex security camera. Hinge is indexed with detents allowing for secure positioning of camera angle at 30-degree increments. Hinge is…
This 3D print model provides a secure wall mount specifically designed for the NanoStation Loco M2, but it may also be compatible with other models. The mount allows the antenna to be rotated horizontally by approximately 100 degrees,…
![Ubiquiti Unifi U7 Pro XGS UFO Stand [u7-pro-xgs]](https://media.printables.com/media/prints/8d294a2f-166c-4294-9164-afa97368111c/images/10724954_8c122fdc-1e08-413e-b4a4-2da95fec3088_a8464d49-d763-4f49-ae13-76a072856495/ubiquiti_unifi_u7-pro-xgs_ufo_stand_screenshot.png)
