Liczymy pasujące modele…
I modeled these after the clipper guards that came with my Surker hair clippers. Mine only came with sizes up to #4, and I wanted more options! This is an updated version from my previous. The “fins” are now much better supported and less…
Rocker feet for Wahoo Kickr core v2. Needs 2 additionnal tennis balls per feet. Designed to work with kickr core rubber feet still in place. The goal is to have more compliance in the trainer and be more comfortable during indoor training.
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
Aufbewahrungsbox Küchen für Maggi, Knorr oder ähnliche Tüten. Die Box hat standardmäßig eine Breite von 17cm. Kann aber einfach mit dem Slicer deiner Wahl herunterskaliert werden auf die gewünschte Breite. :) 13cm breite für große Tüten…
Inspired by the model created by Pico, I created new model which better matches size of the original cover and also of the sealing ring (diameter approx. 25.5mm). Model created in OpenSCAD.
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls. Wahoo KICKR Core 2 version:
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. Note that there are two…
4.5mm guard with additions to make it easily printable. I added 3 supports to the back that snap off after printing. A brim that holds all 10 comb feet down to the bed securely that is also easily removable after printing. Pictured is the…
v2: Top surface is flat now so it can be easier to print upside down sturdier constrcution through softer radii Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding Update: Wahoo compatible…
Replacement guard for the red, #1 3mm 1/8th inch guard for the Wahl Color Pro Hair Clipper Kit 79300 400. The clip on mine broke, so 3d printing to the rescue. Printing Notes Material I printed in PETG as the original guard's clip broke…
Allgemeines 70mm runde Aufbewahrungsdose, welche sich schnell und einfach mit 0,25mm Schichthöhe drucken lässt. Eine Version mit einem Trennsteg und eine andere mit 2 Trennstegen im Inneren. Optional kann z.B. eine Beschriftung angebracht…
Simple adapter for a wahoo head unit to fit onto a garmin mount, the other designs here seemed to be unnecessarily thick.I printed it at 100% infill but you could probably get away with less, id recommend printing it on its side (with it…
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. This is designed to accept…
Tennis ball rocker foot for increased comfort on your Wahoo Kickr V5. Probably works with other Kickr versions but not tested. Ball diameter is 65mm which should fit most tennis balls. There is more than 2cm of vertical travel space which…
Wahl-Style Hair Clipper Insert Size #2 (6mm) Print instructions Do not use supports. Print flat, with text up. Post processing: There is a 0.2 wall attaching the tab on the back to the sides. You need to cut that with an X-Acto knife.…
Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…
Eine kleine Christbaumspitze (19 cm breit) in Sternform. Update 30.12.2022: Aufbewahrungsbox hinzugefügt. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 mm Filament: GIANTARM PLA Silk…
What you see is what you get. :-) Data: 24 x AA 32 x AAA Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament: PLA Category: Organization
Print with a very soft TPU, 100% infill and glue it with Cyanoacrylate. If you rather buy it, you can go to my Etsy shop (free shipping worldwide): https://www.etsy.com/fr/listing/1798060712/wahl-trimmer-power-button-replacement
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
This organizer will hold twelve Oster Andis or Wahl clipper blades or guards. When using PLA I got significant warping on the corners even with a skirt, so I printed using ColorFabb CF PETG, which meant I had to print it very slowly (12…
Replacement trimmer guard for Wahl Peanut Parametric SW model and range (2mm, 4mm, 8mm and 16mm) of ready to print exported models. Print with PETG or something sturdy, I guess PLA will break easily. A bit tricky to print, requires good…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
Dies sind Halter für die More Zerup Sirup Flaschen. Für 2, 3, 4 oder 5 Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind Aufgeräumt. Diese können ohne zu Schrauben in die innen Seite einer Schranktür, oder…
Simple Wahl Clipper storage I made for my girlfriend. It is a fairly large print, so be aware. Works with Wahl 5 star cordless clipper and detailer. Unsure if it'll fit other clippers/details, so measure before printing if not using for…
Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar. Organisiere dein Alltag und bringe ordnung in dein Leben. Es werden zum Beispiel solche Schrauben benötigt: https://amzn.to/41Z0I4K --------------- ENGLISH -------------- Storage…
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Mein erstes brauchbares Modell. Erstellt mit tinkercad. Bitte nicht meckern falls es nicht so perfekt ist. Ich habs gedruckt und es funktioniert bestens.
About This is a set of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer which hold tennis balls to allow the trainer to rock and move slightly while riding. This can reduce fatigue and lead to longer rides and more…
I made this mount for my Wahoo Element Roam. I think it should also work with Garmin and Hammerhead devices, it would be cool, if someone could try this out. Best print in the same orientation as you would apply to the bike, so the 2…
ENGLISH Description 6x packets up to 65 mm wide (e.g. baking powder, baker's yeast, vanilla sugar) 1x packet (horizontal) up to 130 mm in height (e.g. pudding powder) 16x baking flavor bottles with 10 mm diameter For exact dimensions see…
PLEASE NOTE - this is still a Work in Progress and may change over time as I try different configurations of jack positions etc. The overall design however won't change much. The prototype shown in the photos houses a Madbean WIGL vibe,…
The membrane switch on my Wahl 9818L stainless steel beard trimmer fell to pieces. This is a simple replacement that's held in using the small countersunk screw that's hidden beneath the original power button. It's not a perfect fit, but…
I got a Wahoo Elemnt Bolt to replace an old and quirky Garmin Edge 500, and discovered that although the mount looks like a Garmin mount, it's rotated 90 degrees. I had been using Bryce's Garmin stem mount and he was nice enough to rotate…
Larger clipper guards for people who cut their own hair but find the No 12 1.5" guard leaves their hair a little too short. I used a brim and tree supports, adding extra support along the entire curve of each fin to improve part accuracy.…
Ich habe für unsere Tonies eine Wolke gestaltet, die genau auf das Druckbett des MK3S+ passt. Sie lässt sich aber auch problemlos skalieren, solange die Höhe unverändert bleibt (damit der Ausschnitt für das Ferro Band unverändert bleibt).…
Clipper guard organizer for full set. Fits in case.
I created this box to store my loose chilli seeds. In order to protect the seeds, the box is almost opaque (depending on the filament). Dimensions in mm (single tray) Inside: 42,8Lx22,8Wx20,8H Outside: 50Lx30Wx30H Wall thickness: 3,6 I…
Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding. in addition you'll need two tennisballs per feet, so 8 in total. fits easily on 225 x 225 printbeds prints without supports make sure to…
A design for a Tonie storage box. This box is inspired by the design of an original Toniebox and can hold around 10 figures. Ein Design für einen Tonie aufbewahrungsbox. Diese Box ist inspiriert auf dem Design einer originalen Toniebox…
Ich habe mir hier eine einfache Aufbewahrungsbox konstruier mit 1 bis 5 Fächern ---------------- I have constructed a simple storage box with 1 to 5 compartments
I wasn't happy with the available models of these as I find them to be unnecessarily bulky and also elevate the trainer more the necessary, so I designed my own. I've had these installed for around 2 months of daily riding now and it…
This is a printable handlebar or stem mount that can be used to attach a Wahoo ELMNT series bike computer to a bicycle. It is composed of three rigid components (modified versions of the model I remixed) and a single TPU/flexible…
Hiermit könnt ihr alle eure Zombies und Heldenfiguren aus Zombicide 2nd. Edition im originalen Karton aufbewahren. Es passen alle Einsätze genau in den Karton der Spielschachtel.
Simple Schuhhaken zum Ordnung schaffen. Hauptschlich für Halbschuhe oder Schlappen ------------------- Simple shoe hooks to create order. Mainly for low shoes or slippers
Enhance your cycling setup with our Aerobar mount designed for Garmin or Wahoo cycling computers, featuring a GoPro adapter for easy attachment of accessories like cameras or lights. This versatile mount ensures a secure and streamlined…
Update 2019 Aug 15: I was contacted by nichenke who tried to fit this on the Wahoo Elemnt and it didn't fit. He tried to modify the original design from the F3D file but it didn't update right. I tried and got the same results. I've found…
.STEP file available if you want a different gap
++++ UPDATE ++++ meine Modelle sind nun hauptsächlich auf Makerworld zu finden. Dort halte ich die Daten auch gepflegt und es gibt fertige Druckprofile für alle Bambu-Drucker. ebenfalls sind dort weitere Varianten zu finden. →…
Simple stand to hold a Wahoo or Garmin bike computer (the mounts are similar but rotated 90 degrees) on the edge of a charging area. A Garmin mounts more securely as the mount “ears” are on the sides, but a Wahoo stays in place just fine.…
The Wahl Peanut trimmer comes with a few combs -- 1/4", 3/8", 1/2", but I nothing longer. These 3/4" and 1" combs give you more styling options. It slips snugly over the end of the trimmer, and pops off just as easily. Radiused comb tips…
A mount for the Wahoo ELEMNT V2 for Canyon Handlebars with gear grove
I've had my Wahoo Cadence sensor for a couple of years, the clip plastic became brittle and cracked when I took the sensor out. I made this replacement, because you cannot buy one.
Aufbewahrungsbox für Schieblehre vom Hersteller Werckmann mit Verrastung Storage box for caliper of the brand Werckmann with latch
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Depending on the size of your printer or how large you want to print this model, you may want to separate the bodies in each STL. I printed all of the pieces face-down on the textured sheet to give it a cool finish. 09/25/2023: Updated…
Es handelt sich um eine Box zu Aufbewahrungszwecken. Die Box hat einen Deckel mit Scharniergelenk. Maße: 210 x 94 x 90 (L x B x H) Die Box ist komplett in einem Teil druckbar, einfach hochkant slicen. Zur Bearbeitung habe ich die…
RAMMSTEIN Untersetzer und Aufbewahrungsbox: ⌀107 mm x ±4 mm
Modelo de un clipper guard para maquinas wahl que te deja a 57.15mm o 2 ¼ in
Kleine Aufbewahrung für Vanillezucker, Backpulver, Pudding und Aromafläschchen. Revision V2 mit kleineren Änderungen, um besser druckbar zu sein.
the teeth are a little long on the #11s. they're the right depth, but they stick out like 20% further than the #12 wahl hair clipper guard.
I modeled it after the original Kickr Snap. It's quite sturdy because I'm quite heavy. It takes ages to print, but it is sturdy. Did I mention it is sturdy? I printed it with draw on supports. Just for safety. Maybe if you use adaptive…
Put your bike computer on your skadis!
Hallo 3D Druckfreunde, heute habe ich ein Set von Boxen für Nintendo Switch Spiele für euch. Das Set besteht aus 3 verschiedenen Versionen: 1 Schubfach (16 Spiele) Länge: ca. 13,5 cm Breite: ca. 5,5 cm Höhe: ca. 3,8 cm 2 Schubfächer (32…
I printed many versions of this on my resin printers, I haven't tried it with FDM, I don't think it would work but perhaps with a .25 nozzle. I can't find a way to get it to print flat on the build plate and not fill in the coin slot, It…
Eine kleine Dose für Aufbewahrungszwecke jeglicher Art. Ich verwende die Dose mit dem Deckel mit Löcher für gebrauchte Teebeutel. Das Gewinde ist sehr passgenau - wenn man den Deckel 2-3 mal auf- und zugeschraubt hat, geht er dann ganz…
Hey, recently I purchaised great Wahoo Bolt (v2 2021) bike GPS computer. Original mount is fine but I needed something that is longer not to “look down”. I present You my version of handlebar mount (longer than original) for the new Wahoo…
Print it with supports on bed only. PETG worked best for me. You could use the 3MF file and adapt your own settings if needed. If you like it, give me a like and post your make! Enjoy and happy printing! :-)
Requires Tim's lockring, spring and assembly tool (included slightly scaled versions that worked better for me, using PETG) And 2 M3 bolts for a complete assembly. UPDATE: Added version 2 with more left offset, so the unit will be in the…
It's a minimal and compact tray to hold your guard clips! Easily pull it out of the box when you're setting up shop, and put everything back in its place when you're done. Of course, the box isn't a requirement – maybe you just needed…
3D-printed clip mount for the Wahoo Speed Sensor, designed for reliable attachment to your bicycle hub. My friend, an active cyclist, has been using this model extensively in real rides, including rough terrain, and it has proven to hold…
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Wahl cutting guides / beard trimmer organizer - Organiseur de guides de coupe pour tondeuse Wahl. Designed for Wahl Trimmer Elite Pro Organizer for Wahl 1.5, 3, 4,5, 6, 10, 13, 19 and 25 mm cutting guides “Un temps pour soi” is the name…
Inspired by Wahoo Kickr Steer. This phone holder mounts to original out front wahoo mount and is intended for cycling on indoor trainer.
Few things to consider: uses the existing screws that came with the cover I re-drilled the holes with a 1.5mm drill bit remember to place the battery the correct way Wahoo and Garmin (¼ turn) files included some fine tuning with an…
I recently got a Wahoo Kickr Core bike trainer. You need to use a couple spacer adapters in order to mount a thru axle bike on the trainer. These adapters are retained when a thru axle skewers them, but they're loose when you remove your…
I needed a handy platform pedal to clip on my Speedplay pedals. I wanted a small pair of platforms I could use for a short ride and then stove them into my pockets. The whole design process went through several different models. I have…
So, I can be a bit of a klutz some times. I broke the delicate white plastic backing piece that retains the standard detachable trimmer blade to my Wahl rechargeable cordless trimmer. It was like $8-$9 to buy a replacement. I decided to…
I have seen rockers for bike trainers using tennis balls, but nothing for the Wahoo KICKR Shift Bike. I really like the bike, but on longer rides, would be nice to have a bit more movement when in the saddle. These replace the rear feet…
Einfach zu drucken in Material eurer Wahl
Praktische Box für den Kräuterschrank in der Küche um übersichtlich und platzsparend Salatmischungstüten (Knorr oder andere) aufzubewahren. Das Modell kann stehend ohne Supports gedruckt werden. Die herausstehenden Buchstaben können bei…
zur Aufbewahrung von AAA Batterien oder Akkus in der Schublade oder Schrank
These are rocker feet for a Wahoo Kickr Core 2. You need 4 feet and 2 tennis balls per feet. The cup has a diameter of 67mm so standard tennis balls should fit. If your balls dont fit, i can adjust the design. I printed my feet with 8…
Replacement short trimmer guard for a Wahl Model 9818A
I wanted an out the front mount for my wahoo elemnt roam for my canyon h11 cockpit. the mount that I got from canyon did not flow well with the aerodynamics of the wahoo mount so I made one. This one is like the canyon mount and the wahoo…
The original port cover disintegrated so I designed a new one to help protect the port. Print in TPU with the USB logo facing downward on the plate.
zur Aufbewahrung von AA Batterien oder Akkus in der Schublade oder Schrank
I was tired of my 3D printed bike computer mounts breaking so I designed mounts to be made out of TPU. After several test designs, I settled on two mounts to connect to the stem or the top cap. Both designs have been tested on my mountain…
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part…
Der Halter besteht aus vier stapelbaren Trägern, einem Deckel, der den obersten Träger abdeckt, und einem Ständer, in dem der Stapel aus vier Trägern und Deckel aufbewahrt werden kann. Deckel und Träger sind mit Höhenbereichsmodifizierer…
Gotta charge your bike computer and might forget to put it back on the bike before you go for a ride? Or maybe you've got one computer and several bikes and the computer might be on a different bike than you're about to take? Pop this…
This stem Mount fits nicely in the handlebar mount on the Brompton C-line. I have the straight handle bar but i assume the other types fit aswell. I recommend using at least PETG, also i reduced the wall count to two and set the infill to…
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Version-1 Made a Wahoo mount with a Bontrager Ion light mount on the bottom. Changes in Version-2, 1/30/21; Moved the light mount at the back for less weight distribution rather than when it was on front. Made the bottom part similar to…
Update 18 Nov 2019: I've got a Trek MTB which has their Knock Block which uses keyed spacers - I've modified the design to be compatible with Knock Block and uploaded that STL, and also added my Fusion 360 source file. A mount for the…
Habe hier einen Halter für insgesamt 7 Druckplatten erstellt für Platten bis max. 1mm Dicke. Breite kann man frei beim Anbringen wählen, Tiefe ist 215mm Einschublänge. Habe drei Bohrungen zur Befestigung mit 5mm Schrauben gemacht. Bei der…
