Liczymy pasujące modele…
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Vertical holder for standard metric wrenches.. 6-7, 8-9. 10-11, 12-13, 14-15, 16-17, 18-19, 20-22
Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Klíčenku lze připnout na klíče za očko na levé straně viz obrázek. S klíčenkou jdou povolovat a utahovat šestihranné 10mm šroubky a matičky, funkčnost je ale omezena materiálem, ze kterého je klíčenka vyrobena.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Printing instructions For the best results, I recommend PLA, 0.15mm layer height, 3 perimeters and 20% infill or denser. A little force is required when using for the first time. T-shirt Support me & Buy a T-shirt
Wydruk około 8,63 €–10,55 € nettoWstępna wycena jednego wariantu
Sometimes the accessories for the Kenwood Cooking Chef (XL) are screwed too tightly. These are then somewhat unwieldy and difficult to loosen. For this I have now created a remedy with which it is easy to loosen the parts. Print…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A compact and functional holder for hex keys, optimized for the most common sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm. Each slot is clearly marked with the corresponding size, so you can quickly grab the right tool. Perfect for the…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this wrench for my wife to use on milk jug lids and Arizona Tea jugs. It is completely customizable so you can make any specialty wrench you need, such as water bottles, RO filters, etc. Features Double ended wrench Single ended…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Find 3D-Printed RC cars here.
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple combi tool for quicker and easier application of the “Nylock Mod”. One end of the tool can be used as a wrench to turn the nylock nuts. The other end contains an 6mm socket where you can press in one original spacer of your heating…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This wrench is meant for quick adjustment of the y-axis bearing tension of the U-Bolt screws. This is very helpful to improve bearing alignment, noise level as well as other issues such as ringing/ghosting. Model in the photo is printed…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This wrench holder was created to fit 7 small to medium wrenches with minimum material and maximum strength. Enjoy !
Wydruk około 4,10 €–5,01 € nettoWstępna wycena jednego wariantu
Wrench (key) for air valve on paddle board or other inflatable things.
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…
Wydruk około 6,31 €–7,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Pool / Water filter wrench Print with 4 or more perimeter and about 20% infill. Innerdiameter 95,5mm Outerdiameter 99,4mm Step files included
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had hard time with applying tension to some locks when practicing lockpicking. Since I'm using top of the key way tension, some lock were very uncomfortable to hold in the hand and tension it in the same time. It depends on particular…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
I wanted a way to make better use of the space in my toolbox so I created this combination wrench tool holder. I left enough space between the wrenches to be able to get them out easily. The wrenches are Challenger/Proto. This is part one…
Wydruk około 3,24 €–3,95 € nettoWstępna wycena jednego wariantu
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
Wydruk około 8,01 €–9,79 € nettoWstępna wycena jednego wariantu
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…
Wydruk około 7,53 €–9,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
A holder for ¾" adjustable wrench made by Bosh for HSW system. Uses the large insert, prints without supports. Should work with other similarly sized wrenches
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
V6 2024-03-25 New design with a outer ring for better performance V5 2024-03-xx First release
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
I have an under-the-sink water filter whose filters need to be changed every 6 months. There are three housing with screw-on caps. They can be hard to open, so the system comes with a wrench to help you do that… …which I lost. So I…
Wydruk około 1,26 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I lost the Mini wrench to unscrew the dock pins, this is my spare. Ich habe den Mini-Schlüssel zum Abschrauben der Dockingstifte verloren, das ist mein Ersatz.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Zur Reinigung tausche ich ab und an die Tropfer des Gardena Micro-Drip-Systems aus. Dieses Werkzeug ist dabei sehr hilfreich. Die Schlüsselweite beträgt 8,2 mm. Translation: DeepL I occasionally replace the Gardena Micro-Drip system…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Requires: 1x Wrench or tool of your choosing 1x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 1x Screw This! single inserts: https://www.printables.com/model/522781-screw-this-single-insert
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Wydruk około 5,09 €–6,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wrench holder for Park Tools hex head wrenches. Park Tool THH-1 Sliding T-Handle Hex Compatible Wrench Set. It hangs the wrenches on OmniWall system. You can add the 8, 8x3mm magnets to help hold the wrenches in.
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is a portable multiwrench in a size that should fit on keychains. Its scalable in the z axis. Printable with every material except maybe tpu. The Strong Version is 2.6mm in height and the regular Version is 1.6mm high.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Ratchet wrench with sockets case, print in place
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Update: The wrench now tapers, making it easier to use with a sock. Internal geometry adjusted for better results. Over time we often get crud on our nozzles, which makes it very difficult to use most nozzle wrenches as they won't slip…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this printable nozzle changing adapter eliminates the need for any tools or hardware to change the nozzles. It is designed to go with the Nozzle torque wrench from @G_design , but should work with any tool, that uses hex bits. It is…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
The user manual for the Primal Rights Competition Primer Seater (CPS) says not to use tools to tighten the shell plate holder screws — finger tight only! In practice, I've found “finger tight” to be barely sufficient. While it's…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I adjusted Park Tool Holder to work with OmniWall, added magnets to hold the wrenches in place. This also allows you to grab the wrenches from the side instead of having to lift them out. Made it much slimmer. Made it ramp down like…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
This tool is essentially a wing‑nut–style wrench with a hexagonal cutout designed to fit a standard Prusa nozzle. It allows you to change your nozzle without using a traditional open‑end wrench. The main advantage over a regular wrench is…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wie der Titel schon sagt, eine Gridfinity Halterung für zwei kleine Ratschen oder Knarren. Die Knarren sind von Wisent (Bauhaus) und Husky (USA Import). As the title said, a Gridfinity tool holder for two small socket wrenches or…
Wydruk około 4,71 €–5,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mount for T-Wrench > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep your Biltema wrenches organized and accessible with this custom-designed Gridfinity wrench holder. Designed to fit the Art. 10-500 and Art. 10-584 wrench sets (7 mm and 8–19 mm), this tray holds 13 wrenches securely in a 6 x5…
Wydruk około 18,72 €–22,88 € nettoWstępna wycena jednego wariantu
Tool to tighten/loosen ring securing cartridge in a Moen Sense faucet. Mine kept loosening up and I was trying to turn in the ring with a screwdriver which didn't work so well so I designed this. Hope it helps. Hex grip for hand…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Otvírák určený pro 5l kanystry, navržený pro snadné a bezpečné povolení i velmi pevně utažených uzávěrů. Usnadňuje manipulaci a šetří sílu při otevírání. Opener designed for 5 L canisters, intended for easy and safe loosening of even very…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can print the bottom part with PLA, but the top part with PETG. The supports are only needed for the top part. I made this model: https://grabcad.com/library/nozzle-preset-torque-wrench-1 For this product:…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are the settings for a wrench to open new milk jugs. diameterA: 40.3 toothCountA: 45 toothHeightA: 1 toothWidthBottomA: 2 toothWidthTopA: 1.6 toothCurveA: true thicknessA: 2 diameterB: 16 toothCountB: 0 toothHeightB: 1…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did not use CAD for this model. I used the absolutly “customizable rugged box” and the Prusa Slicer, to to cut the “wiessmann” bit holder in pieces, placing it in the box and merge it to a new model. Great tools if you know hot to use…
Wydruk około 14,56 €–17,79 € nettoWstępna wycena jednego wariantu
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
This is a costume wrench for unscrewing of the cap that keeps on the handle bars on ROG pony. It works but must be printed from good materials because the little pins can break off when you try to screw it down. PLA is not good enough !!!
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Мойка высокого давления OLEO MAC имеет нестабильный напор воды. Оказалось, что впускной фильтр был грязным. Пришлось делать ключ.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Spare Triangular Wrenchkey - 8mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Makita Die Grinder Wrench Holder A wrench holder for the Makita Cordless LXT Die Grinder (DGD800) and its two 13mm collet wrenches. This is a wrench holder for the two 13mm wrenches that came with the Makita LXT Die Grinder (DGD800),…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Just a wrench for the hex plastic nuts inside the water tank.
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Note that IKEA has changed the design in their more recent version of Krokfjorden. This wrench is for the old 12-sided (dodekagon) knob, that can be tricky to fasten with wet and soapy fingers. Put a seam in both ends away from the…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Waterdrop thermobeker dekselhaak om makkelijk de beker te openen of te sluiten. Ik heb de wanden dikker gemaakt en gyroid vulling gezet. Nu moet het wel sterker zijn dan het eerste model. Ook een gat erin om het op te kunnen hangen. De…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend 100% infill and as many perimeters as you want, as this is likely necessary to ensure it's strong enough for jobsites and gigs. I used 6 perimeters in PETG. Some ELCO Connectors have wing nuts, and this WILL NOT fit on those.…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…
GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…
This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…
ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…
Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…
Gridfinity Wrench Holders designed to hold full sets of Metric and SAE Wrenches. The metric wrenches are inversed to fit into a standard tool drawer. Mirror the files to get both sides. Printed in PLA+ Nozzle 0.4 Height 0.2 Infill 15%
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
This is the Wrench Rack! This is by far the best and easiest way I've found to organize combination wrenches in your toolbox. These are all just variations on a similar theme.
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Wrench holders slide together. I included pieces with 3 peaks and 1 peak if you need different lengths. There are also front and back pieces that only have the attachment points on one side. The magnets I used were 10x3mm magnets from…
Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
Another basic tool organizer. Works great for deburring tools, small wrenches, screw drivers, glue sticks. You name it. The 200x100 size fits well in a lot of standard Kennedy, Craftsman, and other tool boxes. I printed mine in PLA. Any…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…
Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…
A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…
