Search results: 5kg

Sort order

204 models

P
PrintablesSTORM DESIGN

Bambu Lab - Donor Spool Frame 2 - Modular Design - For Spools from 0.5kg to 3kg

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder "…

Downloads
4,242
Likes
285
Rating
5
P
PrintablesSTS_3DP

5kg Spool Holder

Holder for 5kg spools of filament

Downloads
2,458
Likes
59
Rating
4.8
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Downloads
2,393
Likes
262
Rating
4.89
P
PrintablesTwotone74

Bambu X1 Carbon / P1P Horizontal Side Spool Holder for 2,5kg+ Spools

English: This Spool Holder was inspired by the Horizontal Side Filament Holder by CdRsKuLL, which was one of the first models I printed on my X1 Carbon. But for the most common filament types I always use big Spools, so I changed the…

Downloads
818
Likes
114
Rating
4.63

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Downloads
799
Likes
66
Rating
4.67
P
PrintablesAyersWV

K2 Spool Holder - 5KG Spool Size

I have enlarged K2 Kevin's Spool Holder for a 5KG Spool. I installed two screws to keep the smooth rods in place from the underside of the side. You may want to pre-dill or use self-tapping screws. Note the Filament guide fits tight, I…

Downloads
780
Likes
75
Rating
4.6
P
Printables3D_CNC

Adjustable Spool Holder .5kg - 2kg spools (fixed screw)

Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…

Downloads
768
Likes
144
Rating
4.97
P
PrintablesLALAG Labs

Load cell HX711 5kg 12.7x80 M4 M5

Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…

Downloads
759
Likes
17
Rating
4
P
PrintablesFilaments.ca

Filaments.ca EconoFil™ MINI Refill Coils 0.5KG Master Spool

Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…

Downloads
733
Likes
78
Rating
4.78
P
PrintablesS3DP

Simple Bench Top or Side Mount Large 5Kg Filament Spool Holder - One Piece 360 Deg Rotation

I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own. It is super simple and the rolls don't have any issues spinning on it. You can also add a little Kapton tape to the top edge…

Downloads
655
Likes
46
Rating
4.5
P
Printablesslothstops

Filament Roller for 1kg and 2,5kg spool

You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…

Downloads
617
Likes
55
Rating
5
P
PrintablesNoM

5KG Bearing Spool Holder (eSun)

As there doesn't appear to be any spool holders using bearings in this formfactor which fits 5kg eSun branded rolls, I decided to modify a design and add my own touches to make it easy to switch rolls over with just two pieces. Print: 1 x…

Downloads
556
Likes
47
Rating
4.17

Polymaker 5kg Spool Roller

Hey all. I wanted to upgrade my spool solution to these large and heavy spools to something with bearings. So, without re-inventing the wheel I sourced the internet for inspiration. I found Polymaker has a model similar to this, but…

Downloads
390
Likes
84
Rating
5
P
PrintablesPeter Mastren

5Kg Spool Roller

Filament spool roller for Zyltech 5kg filament spools. Hardware required : 4 - m3x16 (or longer) bolts 4 - 608 bearings Print tips : 1 - SpoolBase 2 - SpoolFrame 2 - SpoolRoller No supports required but you may want to use a brim for the…

Downloads
362
Likes
34
Rating
5
P
Printables3Dimensions

Lockable Insert for Honeycomb Storage Wall / HSW / Max. Load 15kg

Hang heavy equipment on your Honeycomb Storage Wall with this inserts. The insert can withstand forces up to 15 kg and does not detach from the HSW. I have made two variants, M4 and M5. Update: 04.03.2024 nut M3 added, can only be locked…

Downloads
354
Likes
102
Rating
5
P
PrintablesNindrene

Pastamatic Remix with 1kg and 5kg Spool Holders

Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…

Downloads
346
Likes
24
Rating
5
P
Printablesnnicclaas

5kg Spool Holder 608 bearings adapter

I liked the 5kg Spool Holder by gfursu, but wanted to have an axle riding on 2 608 bearings. So i designed an adapter that fits in the slots for the old axles and can hold an 608 bearing. Lastly i added an axle and an insert for the spool…

Downloads
319
Likes
33
Rating
0

XXL Spool Holder (5kg & Under)

An oversized spool holder for xxl sized spools. Nothing too fancy. Doesn't feature any type of bearings, or fancy features. I needed a plain and simple spool holder for Polymaker's 5kg abs spools, and threw this design together in F360.…

Downloads
275
Likes
25
Rating
4.5
P
Printablesmrusk

High Performance Spool Holder for Prusa Lack Enclosure (up to 5kg Spools)

These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and…

Downloads
267
Likes
46
Rating
4.75
P
Printablesbrnin8r

1:10 scale 25kg cast iron olympic weight plate keychain

A 25kg/45lbs cast iron plate scaled down to make it more portable. Diameter: 45mm Thickness: 3.75mm Weight tolerance: +/-3% For training use.

Downloads
261
Likes
32
Rating
5
P
Printablespastrami4033

5Kg Spool Roller (optimized)

I had a lot of trouble with too much friction with the existing model, and needed to tweak it to prevent my extruder from skipping steps. While doing so, I ended up re-modeling everything from scratch with the existing model as a base.…

Downloads
256
Likes
23
Rating
5
P
PrintablesLedmaster

Adjustable 5kg Spool Holder

This is an adjustable spool holder that I designed for poly maker 5kg rolls, which will probably work on other brands as well. It is adjustable, so you can resize for 3kg and 1 kg rolls as well. The bearings are 608 6-6-2025 Hello, I have…

Downloads
252
Likes
27
Rating
4
P
PrintablesSPEKERDUDE

Large Spool Holder - designed for 30cm diameter (5kg) spool

spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…

Downloads
250
Likes
16
Rating
0
P
PrintablesMarko3D.cz

2,5kg Spool Holder for Original Prusa MK4 & MK3S+

Stáhněte si můj model držáku cívek pro 3D tiskárny Original Prusa MK4 a MK3S+ zdarma. Bez problémů se na něj vejdou cívky s filamentem o průměru až 30 cm a hmotností až 2,5 kg.

Downloads
250
Likes
22
Rating
4.5
P
PrintablesPolymaker

Polymaker 5kg Spool Holder

Polymaker 5kg Spool Holder designed and printed by Dennis from Toronto Hardware required: - 4x 3Mm hex nuts - 4x 25mm 3mm bolts - 8 bearings 1/2” with 1/4” ID Bushing goes on bolt side on axel. Axels printed at 40% Rollers two piece. Line…

Downloads
227
Likes
48
Rating
2.33
P
PrintablesXboxHacker

Pastamatic Remix: 5Kg to 5Kg Spool Winder

This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…

Downloads
216
Likes
21
Rating
0

Sunlu 5kg spool holder adapter

I was in need of a 5kg spool holder and found the Polymaker 5kg spool holder by UB3D here on Printables. After making it I quickly discovered that the spool holder shaft was too narrow for the Sunlu spool, causing the spool to drag on the…

Downloads
212
Likes
28
Rating
4
P
PrintablesCluadius

Ambrosia Filament 5KG Spool Holder

I jumped on the 5kg spools from ambrosia as soon as I saw them, love not changing spools but figured I should print a legit spool holder after limping along the first roll. Super simple print, I used ABS but anything should work fine.…

Downloads
207
Likes
9
Rating
4.33
P
Printablesgapsed!

SUNLU 5kg Spool Holder

Finally I added some rubber pads 15x2mm: https://s.click.aliexpress.com/e/_omEYj6G (Affiliate Link)

Downloads
204
Likes
23
Rating
5
P
Printablesvorby

5kg Spool Holder (Printed)

Quick and all printed, stand for 5kg filament spool Designed for spool with 40mm diameter center hole Printed: Prusa XL 0.6mm nozzle, 0.25 layers

Downloads
196
Likes
8
Rating
0
P
PrintablesRobert89

5kg wall & roof filament holder

I have designed this wall and roof filament holder, mainly for Esun PLA 5KG spools, but it can be used with 1KG spools with other adapters. Up to you if you want to change over the bearings or buy another set. The hole through the holder…

Downloads
188
Likes
18
Rating
0
P
PrintablesBumbleGoatDk

Fiberlogy 2.5KG-Spool Holder (MK3/MK4)

I spool holder designed for 2.5KG fiberlogy spools. 110mm between each side.

Downloads
183
Likes
10
Rating
5
P
PrintablesTJzDesign

Adjustable Spool Rollers (.5kg - 5kg)

After not finding a great spool roller that would fit a variety of spool sizes, I decided to come up with my own. After a few ideas and a couple iterations, I came up with this one! It works with spools from 100mm diameter to 300 mm…

Downloads
178
Likes
21
Rating
4.67
P
PrintablesSWbAC

5KG Spool Holder

Meet the upgraded 5KG Spool Holder, E ngineered to handle heavy-duty filament spools with confidence. Designed with a reinforced base and side walls, this holder is optimized for smooth feeding and long-term durability. Perfect for large…

Downloads
167
Likes
8
Rating
0
P
PrintablesMCB Designs

Filament Spool Roller v2 (5kg, 3kg and 1kg)

Design Concept The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency. Use This roller is ideal for…

Downloads
167
Likes
18
Rating
5
P
PrintablesPrusaPilot

Best 3.5kg Spool Holder

Finally, a good 3.5kg spool holder! I like to print big, and a lot, so I use 3.5kg spools with a reverse bowden tube to my printer. I could not find a decent spool holder setup for these massive spools that didn't cause print quality…

Downloads
167
Likes
17
Rating
5
P
PrintablesVAROE

Filament Spool Wall Mount/Rack 2.5kg - VAROE

This model needs to be used with dowels. The holes of the mount are having 23mm diameter and should fit 22mm of (wooden) dowels (like in my case). If there are any troubles i've uploaded the cad model for adjustments. If there are a lot…

Downloads
166
Likes
31
Rating
0
P
PrintablesWinner

Bag hanger. Ultra fast. Up to 25kg

0.20mm layer PLA Really quick print. Endurance 25kg

Downloads
165
Likes
26
Rating
5
P
Printablesbbrendon

Spool Holder - any size (5kg, 2kg, 1kg, etc)

This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…

Downloads
164
Likes
20
Rating
5
P
PrintablesJürgen Weigert

Filament Spool stand 5kg

For casual use, 1kg spools are nice. i still use my old https://www.thingiverse.com/thing:1533722 or https://www.thingiverse.com/thing:1864589 spool holder designs for those. But when you do heavy duty 24h faceshield printing (or…

Downloads
145
Likes
15
Rating
0
P
Printablesron

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Downloads
130
Likes
14
Rating
5
P
PrintablesFipsthedog

Low profile quick-swap Spool roller holder; Also for wide rolls of filament 2.5kg

I was annoyed of my current spool holder, as I had to adjust it to fit filament rolls of different widths. With this design I can just put a roll on it and swap them easily. The design requires: 4 M6 Screws 4 606ZZ bearings The bearings…

Downloads
125
Likes
13
Rating
4.5
P
PrintablesDoak

PolyBox II Extension for 2.5kg spool

Raises the top of the PolyBox to fit 2.5kg, 30cm filament spools.

Downloads
122
Likes
10
Rating
4.5
P
PrintablesSpencer1990

5KG Spool Holder

I got tired of switching spools out on bigger prints and made a basic spool holder for the 5kg polymaker spool. I made the original out of petg but I'm making the next one out of abs. It is working well and I have included the STEP file…

Downloads
121
Likes
27
Rating
0
P
Printablesdorsai3d

Pastamatic 5kg lightweight upgrade

A few modifications to allow the Pastamatic to be used for 1kg and 5kg spools. I raised the height of the source spool by 35mm with a wider smooth bracket riser, but it fits in the same area. The crossbars, target spool female threaded…

Downloads
118
Likes
12
Rating
0
P
PrintablesDanV

Zyltech 5KG spool holder for Prusa XL

Spool holder for 5kg spools of filament from Zyltech. May also fit 5kg or 3kg spools from other vendors. Print on the flared knob end with a brim. I used PLA and it's fine, but may be printed with PETG if so desired. After printing,…

Downloads
115
Likes
7
Rating
0
P
PrintablesBdaboy

5kg spool roller

There are two roller versions. V2 has a flair on the roller to prevent spool from rubbing on sides. Both can be printed vertically without any supports and was designed for standard 608 bearings. Add bearings into both rollers then place…

Downloads
103
Likes
9
Rating
5
P
PrintablesSB

Filament-Rollen-Halter 0,25-5kg - neue Schwerlastversion V5

Filament-Rollen-Halter 0,25-5kg - neue Schwerlastversion Version05: Endlich habe ich Zeit für den Abstandshalter gefunden. Ihr stellt die Rollenhalter einfach darauf und schon ist die ganze Sache sehr stabil. Wenn der Abstandshalter…

Downloads
100
Likes
10
Rating
5

Spool Holder 2020 2.5kg

Remixed for use with 2020 extrusions and 2 mounting points for m5 + t-nut and made cap mountable with m5 as well.

Downloads
99
Likes
5
Rating
0
P

Larger Ceiling Spool Mount 5Kg compatible

This is a spool holder project I have been playing around with for awhile. I had my smaller spools hanging from the rafters using an old Ender 3 spool holder, but I needed something a lot larger to hold my 5Kg spools up there. I found a…

Downloads
93
Likes
9
Rating
0
P
Printablesbrisket

Mega Anti-Tangle Spool Holder - For Polymaker 5kg spools

Modified to fit wider 5kg Polymaker spools. I ended up super-gluing the half rollers together since making them longer added some sag.

Downloads
91
Likes
18
Rating
0
P
PrintablesArhein

Flashforge PLA Pro - 0.5kg - Empty spool bin

After using up the filament on the spool, the spool itself is usually left empty and considered useless, often discarded. However, this is one way to repurpose your empty spool for organizing various screws, nuts, and other small tools.…

Downloads
90
Likes
41
Rating
5
P
PrintablesDC

5kg Spool Holder (bar not included)

Started buying PLA and PETG in 5kg spools for general printing purposes. Less reloading and less concern of filament runout, so I've been happy overall, but the bearing spool holders have failed on me twice so far. After the 2nd time I…

Downloads
88
Likes
3
Rating
0
P
Printablesmail4mail

Roughly designed fillament spool holder for any cubic kobra S1 (300mm diameter/2.5kg)

Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…

Downloads
87
Likes
4
Rating
0
P
PrintablesWilko_SLO

Strong Hook (35kg)

Print with PETG without support. max 35kg (PETG Z=0,3 infill: 100%) max 15kg (PLA Z=0,3 infill:10%) Use srews to fix it to the wall. Cover it. Tested PETG opn the end of hook: W

Downloads
87
Likes
24
Rating
5
P
Printableshambone0

10kg or 5kg Spool Holder

I built for the community a 5kg or 10kg spool holder. This should be a fairly easy print and is designed with easy to modify files and easy to replace inserts to make printing easier and maintenance easier. If you redesign this model…

Downloads
86
Likes
30
Rating
4.5
P
Printablesoriddlero

Upgraded Telescoping Prusa XL Spool Holders Adjustable 1KG-5KG w/ Leveler Clip

I run a very busy printing operation & I mostly print off of 5 kg PETG spools. I've designed what I think is the best, versatile spool holder option for my XL printers. it looks simple at first glance, however, please read the below, as…

Downloads
86
Likes
7
Rating
0
P
PrintablesonlyJ35T3R

RatRig V-Core 4 Spoolholder 2,5kg 100mm wide Spools

Spool Holder Assembly to Mount bigger Spools inside the Enclosure. Tested with 2,5kg Spool 100mm wide from Extrudr. BOM per Spoolholder (Double for IDEX) 1x 2020 Extrusion 260mm long 1x Right or Left Spool Holder Mount (printed Part,…

Downloads
85
Likes
14
Rating
0
P
PrintablesLunia 3D

Heavy Large Spool Holder Adapter 8.5kg 8kg Filamentive Bearings 608ZZ

A spool adapter made for larger heavy filament spools such as Filamentive's 8.5mm reels. Will fit other brands with internal holes that are 36mm. I use a 165mm wide spool but will fit wider spools up to ~200mm. This spins perfectly smooth…

Downloads
83
Likes
9
Rating
0
P
PrintablesEL-Tonno

Spool Adapterring 2,5kg (Spulenadapter Ring für 2,5kg rolle)

Spool adapter ring for a 2.5 kg reel with a diameter of 249mm/Spulen Adapterring für eine 2,5 kg rolle mit einem Durchmesser von 249mm.

Downloads
83
Likes
8
Rating
5
P
PrintablesERIK3DP

filament dry box for big 2.5kg spools

Seems there are not many filament dry/storage boxes for big 2.5kg spools - so I made one. It's based on an Ikea cake carrier ( https://www.ikea.com/de/de/p/krispig-tortentraeger-20336407/ ), which turned out to fit quite well around 2.5kg…

Downloads
82
Likes
31
Rating
5
P
PrintablesGlenn Brockett

5kg spool holder

For a 30 dia x 15 cm spool with ~6 cm hole (Sunlu 5 kg spool). It will fit on a 220 x 220 mm plate. (barely) Use ½ inch conduit cut to 22 cm lengths. There are holes to set screws into the cross rails to firm them up. I am using M5 bolts…

Downloads
81
Likes
9
Rating
5
P
PrintablesHackMonkey

MMU Under Shelf Auto Rewind for 2.5kg spools

This remix builds on an existing great design, but just scales it up to fit larger 12"/30cm spools, commonly used for 2.3kg, 2.5kg, or 5lb spools. I have primarily used it with spools from IC3D and Printed Solid, which are roughly 4.25"…

Downloads
79
Likes
25
Rating
0
P
Printables3Dinfinity

Weight Discs (20Kg/15Kg/10Kg/5kg)

weight plates with different weights, designed to be able to customize the weight of a squat or bench press rack model

Downloads
79
Likes
11
Rating
0
P
PrintablesFraughst

Prusa XL 5kg Spool Holder

Split the model in your slicer and place both thread features facing up. Secure base of spool holder to the printer in the desired location using the M4 bolt and nut from the original spool holder. Thread the second portion of the spool…

Downloads
78
Likes
7
Rating
0
P
Printablesdevilryascended

Extra Long Roller for 3-5kg spools

The original creator made this model to be used with standard 1kg spools. I extended the base plate and the rollers so it could be used with larger spools. Note: I tried desperately to find the original creator. If someone could comment…

Downloads
76
Likes
5
Rating
0
P
Printablesbggd.tiguan

Filament Rollen Wandhalterung für 2,5kg Rollen

Wandhalterung für Filamentrollen mit 2,5kg Filament Gedruckt habe ich dieses Teil mit 5 Wand und 5 Oben-Unten Layer und 20% infill. Aus PETG Benötigt werden 25mm Alu Rohre oder vergleichbares. Keine Unterstützung nötig Gerne Konstruktive…

Downloads
76
Likes
8
Rating
0
P
PrintablesDavid Payne

2.5kg Spool Holder

This is a spool holder than can hold 2.5kg spools. I attached mine to a beam on the ceiling. I printed mine with PETG.

Downloads
73
Likes
8
Rating
5
P
PrintablesMARC PRUDHOMME

Filament Hangers, For 5KG Spool

This is the longer, 5KG spool version. For the 1KG version, click here . Designed to be cheap, strong and quick to print. The top is extra large in order to nest them together during print, which also means they'll hang on just about any…

Downloads
72
Likes
12
Rating
5
P
PrintablesFormtechNZ

5kg Spool roll holder (updated to wide rim twin bearings)

Updated 20/1/26 New File has wider section for dual bearings to allow for wide cheeks on the larger spools Extra parts: use 4 skate bearings per dog bone. Total 8 for twin bones. Extra longer 8mm bolts, make 8mm longer to suit over BOM…

Downloads
71
Likes
10
Rating
5
P
PrintablesMTang

Modular Elegant Ball Bearing 5KG Spool Holder

Updated June '26 - Increased tolerances for print-in-place hinges. My 5KG spool holder. Features: Small foot print, minimalist looks. Support for mutiple spool sizes Print in place hinges for top loading of new spools Four 608 bearings…

Downloads
70
Likes
12
Rating
4.75
P
PrintablesAdam Price

Titex Calibrated Powerlifting Barbell and Plates 0.25kg to 25kg plates with collars

This is my attempt at replicating a 1/5 scale model of a Titex Calibrated Weight Plate set. Everything can be printed, however I found that the plates were too heavy for a printed barbell. Use a 6mm x 300mm aluminum rod in place of the…

Downloads
69
Likes
15
Rating
0
P
PrintablesKoen

2.5kg/10kg spool holder

Spool holder for 2.5/10kg spools, requires a 8mm or 3/8ths inch steel rod at about 15 inches in length.

Downloads
66
Likes
2
Rating
0
P
PrintablesChris Floof

eSUN 5KG shaft for Modular Spool Holder

This is a modified modular spool holder shaft for the FormFutura Modular Spool Holder to fit eSUNs 5KG spools with a 30mm opening. The shaft is 28mm in diameter so it will fit other spools with a 30mm center hole. Due to the size of the…

Downloads
65
Likes
8
Rating
5
P
PrintablesBaghwan

Large low friction universal spoolholder - Suitable even for 2.5kg cardboard spools

I printed three large spool holders but not a single was able to work well with the very soft 2.5kg Polymaker Polyterra or Greeny+ cardboard spools, so I optimized Thejirals great spool holder to fit more different spools and even this…

Downloads
63
Likes
8
Rating
5
P
PrintablesNicerSlicer

Foot Gasflasche 5kg Fuß Halterung (Wohnmobil) 16mm

Halterung für 5 kg Gasflaschen, z.B. im Wohnmobil. Rutschsicherung. Die untere Ebene ist 16mm hoch (passend für Pössl)

Downloads
62
Likes
5
Rating
0
P
Printables8BitAlex

Prusa XL - Big Spool 5KG spool holder

I needed a spool holder to mount on the side of the Prusa XL that would support the 5KG spools from MatterHackers. Those spools have a smaller than usual center hole. Of course, this will also work for smaller spools as well. I had some…

Downloads
60
Likes
4
Rating
0
P
PrintablesDiesel Don

5kg spool holder 2020

You will need additional hardware for this to work x4 M7x45mm nuts and bolts or longer x12 M7 washers (3 for each corner), x8 skateboard bearings (2 for each corner). Use the washers to space out the bearings as needed. I have noticed the…

Downloads
60
Likes
12
Rating
0
P
PrintablesBuilderbytes

Filament adapter for 0.25kg to 1.0 kg spools.

A two piece adapter for small 0.25kg filament spools. It slides in the center of the filament spool and makes it fit the AMS like a full sized spool of filament. It takes ~1:15 minutes to print on my Bambu lab P1s with standard settings.…

Downloads
57
Likes
5
Rating
5
P
PrintablesLeucoemeraldine

30mm PVC Pipe Filament Wall Mount (Fits 5kg rolls)

I couldn't find a wall mount for my filament that could hold large Zyltech 5kg rolls so I made one myself. It holds up one full 5kg (11lbs) roll supported by a PVC pipe up to 35mm in diameter. Each rack will use about 60g of filament…

Downloads
57
Likes
12
Rating
0
P
Printablesmodsmthng

Spool Holder Wall, one part, big rolls (Ex: 2.5kg), 120mm

Print horizontally (on the flat side) 6 Walls / Perimeters Infill: 25% Gyroid 0.2mm layer height Fast printer? Use a “strength” preset or lower the print speed (this improves stability) The holder supports rolls with a width of up to 120…

Downloads
56
Likes
8
Rating
5
P
PrintablesFraughst

5kg ZYLTech Big Texas Spool Holder

I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy. Print this model laying flat with the legs…

Downloads
56
Likes
5
Rating
0
P
PrintablesNeil Cristobal

5kg Spool Roller Stand

A spool holder for a 5kg filament spool. parts needed 6202-2RS bearings M12 nuts and bolts

Downloads
53
Likes
11
Rating
0
P
Printablesmartinkh

Spool holder for FLSUN V400- takes 5kg spools

Use 10x22x6 wide bearings, 4x. Use factory mounting screws/holes. Editable file included if you want to get fancy on the roller with and steps or guides to center spools of various sizes.

Downloads
53
Likes
0
Rating
0

5Kg Spool Drybox Kit

All credit to @nnicclaas and @NoM_223000 for their great design. I just did some cuts in my slicer to adapt this for a generic drybox.

Downloads
51
Likes
9
Rating
0

5Kg spool holder / dual spool holder

This 5Kg spool holder has 4 rollers and have a filament guid with the possibility to add ptfe tubes with colets. The sppol holder also have the good dimensions to take on 2 diferent 1kg spools since it as 4 rollers. You can also add TPU…

Downloads
50
Likes
9
Rating
0
P
Printablesstemwise

5kg Spool Mount - TAZ 6

I go through so much filament in my class that I feel like I'm changing the roll every day. So, I purchased a 5kg roll of black for my Lulzbot Taz 6 printer and quickly realized I would need another solution to mounting it and making sure…

Downloads
50
Likes
7
Rating
5
P
PrintablesJacck

Prusa Enclosure - 5KG filament holder

Pro montáž budete potřebovat vytisknout: 2x Položku1 (držák válce) 2x Položku2 (držák profilu 20x20) 1x Položku3 (průchodka filamentu) Dále je třeba: 1x plastová trubka o průměru 50mm a max délce 475mm 2x plastový nebo hliníkový profil…

Downloads
49
Likes
9
Rating
0
P
PrintablesMulleMeck

DIY 14.5kg concrete dumbell

you will need Print out : 2 of main.stl 2 of lid.stl 2 of printable nut.stl (print on 45 degree side) 1 of handle (print upright with wide brim) Buy: 400mm M12 threaded rod 12 M3x10 screws 12 M3 nuts 20kg concrete bag Glue the nuts in the…

Downloads
48
Likes
15
Rating
0
P
PrintablesNeonverse

2,5Kg Spool Holder with 608ZZ Bearing

A holder for 100mm wide spools with offcentered bearings to eliminate spool wobbling druring print.

Downloads
47
Likes
12
Rating
0
P
PrintablesMacrokraft

5kg Drybox Lid Clamp + Full DIY Build Instructions

Where are all the 5kg filament spool dry boxes? DIY Build video: https://youtu.be/h-Q685tzcTM You may find that there are few options for 5kg spool-printing ballers like yourself. So let's roll up our sleeves and make a super effective…

Downloads
46
Likes
16
Rating
0
P
Printablesshark

Spool Holder for 5kg Filament #3

5kg filament holder to fit on a 22x22 cm print plate. Very simple and easy to print.

Downloads
42
Likes
4
Rating
5
P
PrintablesBassettDesigns

Spool Flange - Modular Size - 50g-5kg

Do you have a lack of spare spools? Do you want a quick, modular way to assemble some more? This parametric design allows you to customize your spool to suit your needs for spools as small as 50-100g to kilograms and beyond. We've…

Downloads
42
Likes
6
Rating
0
P
Printablesibjel

Filament Roller for 2,5kg spool Remix 6201

remix for 6201 bearings I printed with 0.6 nozzle with supports on roller (vertically printed)

Downloads
41
Likes
3
Rating
0
P
PrintablesWIESEMANN 1893

XXL Sledgehammer Holder (4.5kg/10lb) 033 I ENFORCE I for screws or peg board

Tool holder for Sledgehammer 4.5kg/ 10lb. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 50.03mm W -91,228mm H - 62,5mm We…

Downloads
41
Likes
11
Rating
0
P
PrintablesNick Garcia

Polymaker .75kg Spool Adapter Spacer

this is an adapter spacer for Polymaker's .75kg spools to fit on Bambu's reusable spools. Add my print to this linked print https://www.printables.com/model/331971-polymaker-cardboard-to-bambu-spool-adapter be sure to carefully rip…

Downloads
40
Likes
4
Rating
0
P
PrintablesFloatingCam

5KG Bearing Spool Holder with Brake

The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…

Downloads
39
Likes
4
Rating
0
P
Printablesshark

Spool Holder for 5kg Filament

Holder for 5kg filament spool. Use 2 end pieces, 2 cylindrical connectors, and 1 bigger cylinder for the spool. The photo is of a prototype print, where all 3 cylinders were same size. Prints without support. Each end piece fits on a…

Downloads
38
Likes
4
Rating
0
P
PrintablesAndrew Barabat

Edsal Rack Shelve 2.5kg Spool Holder

Print with PETG/ABS/ASA Print side down. Use supports

Downloads
38
Likes
2
Rating
0
P
PrintablesSlidingWindow

k1 Max Spool Holder - 5KG

Refined spool-holder upgrade featuring precision-fit tension rods and a secure screw-on retention cap. Designed for a tighter, more reliable hold on oversized or non-standard filament spools, ensuring smooth feed-off without wobble or…

Downloads
37
Likes
4
Rating
0