11,072 models
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…
Print approx. €17.00–€20.78 excl. taxPreliminary estimate for PETGSource material: PET
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera. Features Compatible with the official Pi…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
A (parametric) buckle that you can attach to your camera strap, which lets you (hopefully) stop losing your lens cap. The STL is sized for a 58mm lens cap, and a ~40mm strap width. The printing layers make for a great friction catch for…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Discover the intricacies of the Sony A7 with my meticulously detailed 3D model, perfect for enthusiasts, designers, and educators. This high-fidelity model includes every detail of the camera body and lens, capturing the essence of the…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This mount uses Zipties to mount the camera to the bed. This creates beautiful timelapses! I've used M3 screws from the spare parts bag of my prusa (I used a long screw to attach the swivel so it doesn't break)
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Hello there! I designed an extendable vintage camera. This is a print-in-place model that doesn't require support. It is my first try on modelling a model that has to disassemble itself into multiple components after printing. It is…
Print approx. €7.13–€8.71 excl. taxPreliminary estimate for one variant
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
This is the 3D-printed enclosure of my open-source HomeKit camera . This snap-fit enclosure can be assembled without any screws. Hardware Raspberry Pi Zero W Camera Module Camera Cable compatible with Raspberry Pi Zero 5.1V micro USB…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
15 degree base for Tapo C200 camera or can be used whitout feet for a flat base. Supports needed on build plate only for the base. Tree supports are easier to remove. For asembly use 2 M3x10 bolts.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
My Exa camera was missing the takeup spool, so I made my own. Printing Print with the dome faceing upwards and the hole facing the print bed. Requires some support.
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
This is a rigid arm designed to mount to the z axis wheels of the Anycubic Kobra Neo. It has a 7mm hole oriented vertically at the end that fits a standard Gopro style camera mounting screw (the type you would use to attach it to a…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
Canon LP-E17 Battery Charger LC-E17E Base This base snugly fits to your canon battery charger LC-E17E, and provides clear slots for charged and dead batteries. You'll never get caught without a charged battery again! Simply store your…
Print approx. €12.40–€15.15 excl. taxPreliminary estimate for one variant
I designed this large camera tripod for filming large projects for on my youtube channel! I made a video about this project: Links doesn't work on printables at the moment, it gives an error but you can go to the tab “Makes & Comments”,…
Print approx. €7.50–€9.17 excl. taxPreliminary estimate for one variant
SV06 Plus Front Camera Mount Modified the Original to Fit the SV06 Plus. I thank “ azlum ” for his original design. Only the Front Plate part included. Use the original risers form the original model. SV06 Front Cam Mount - Top.stl Top…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
Reduce the likelihood of scratches and damage of your action camera lens and filter. This lens hood is fastened through simply adding it between a 52mm filter and a camera cage. I am using an Insta360 ONE R with a SmallRig cage (2901),…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
THIS IS A OLD VERSION! new one here ! --------------------------------------------------- Hi all, i was using another Pi Cam mount for my Prusa Mini but it wasn't adjustable so i made one by myself: This is a Raspberry Pi Camera mount…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
Case to build AllSky camera using UnderWaterDome…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
simple camera TAPO C110 holder for Prusa mini+
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I made a Powerbank Mount for my Camera Tripod. I designed this for my Anker Power core 20100 Powerbank. Now i can easily charge my Sony Alpha 7 III, while it takes photos or Timelapse etc. The diameter of my tripod (ESDDI) is 2,4 cm.…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
This Cameramount is an easy to fix solution for the current (2025) Buddy3D Camera, sold via Prusa Online Shop. The mount is for to use with the mounting plate that comes with the camera. It is variable in the fixing angle so the user is…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for PETGSource material: PET
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
A magnetic mount to adapt Peak Design's Mobile Case to an Apple Studio Display for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at the…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
This mount interfaces with the plastic base plate included with the camera itself via three M3 screws and two nuts. The semi-circular slot on the base allows for the camera to be rotated slightly to either side of perpendicular to get a…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by xiphmont's implementation, I created my own files for the enclosure and pi3a+ frame for this update. Please follow xiphmont's guide to install the pi3a+ and perform the upgrade. The installation was flawless for me with the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Pouzijte sroubky M3x16 nebo delsi Use M3x16 or longer screws
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
Camera Mount for Prusalink/Prusaconnect on Frame
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Print approx. €6.58–€8.05 excl. taxPreliminary estimate for PETGSource material: PET
This model combines two awesome models to mount and adjust the Raspberry Pi HQ Camera. After printing the ball head piece you need to print also the following parts from the linked originals: Raspberry Pi HQ Camera Mount for the…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Hi, Here an enhancement of the camera mount I designed for my 3D printer Creality Ender 3 S1. The previous version had some weakness, like the camera support, too thin, and a bad angle view. I operate a new design with a better support…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Sure.. the world needed more Raspberry Pi casings… -.- Well… I needed a compact, mobile ridged platform to develop AI models and gather data. I was searching online for a good casing that could mount my Pi to something like a tri-pod /…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Camera support oriented at 24° downwards in order to see the print. Planned to reuse one of the tapped holes of the Plexiglas rear plate, you can simply reuse the screw. Use the screws provided with your Xiaomi camera to fix it on the…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
The OpenSCAD file (TPlinkCameraMount.scad) reads the existing 3DSourcerer STL file (TOP CORNER FOR TP LINK.stl) and drills the hole and forms the slots. The result is the STL file (TPlinkCameraMount.stl). A snapshot of the slot is shown…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Für mein Wohnmobil habe ich eine Solar-Rückfahrkamera mit Funk-Übertragung besorgt ("AEG"). Da eine Kabellose Montage möglich ist und ich weder am Kennzeichenhalter noch oben am Wohnmobil die Befestigung für sinnvoll erachte, sollte sie…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Screw mod for Kinect Camera Mount to hold in place a spring 4x M3x10mm kinect_backplate_mod kinect_base_mod 2x Kinect_Mount_Lock_Print_original
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Case for Raspberry Pi 1A+ / 3A+ with mounting solution for the Raspberry Pi High Quality (HQ) Camera. The CSI cable is contained withing the case. Features: compatible Raspberry Pi A+ and 3A+ Mounting for Raspberry Pi Camera HQ CSI cable…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure The camera can be mounted on the right side of the Prusa Enclosure using the original camera mount holes. Simply place the camera on the mount and rotate it clockwise. This…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
I was looking for a way to install a cheap 1080p webcam inside my Core ONE in the top corner. I found a cheap EMEET 960 camera on amazon that was mostly plastic. Taking it apart you can see the board is quite small. This mount is designed…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Print it on its side to get the clips stronger, using support everywhere. Filament ASA and layer thickness 0.20mm. I used nozzle size 0.4mm. I have a separate file for matching fixture for a Ledlenser MH5 light with flex-brake-bad, an…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
support pour cameras beagles mintion v2 réglable en hauteur. ce visse avec l'axe vendu avec la camera beagle mintion v2 Pour bureau avec une épaisseur max de 38mm.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Mouunt can be attached with double side tape. Additional parts needed: 1x M3x25 screw 1x M3 nut
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Introduction Earlier this summer I had to throw together a “quick and dirty” setup for a bird camera and decided to have a better solution next time with multiple use cases. This is what I came up with. This is a compact case for…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
LSC Rotatable Camera Mount with a 16mm clip. The clip fits the Spider Farmer grow tent poles very well. It will also fit most other branded grow tents. My suggestion, print this mount in PETG or ASA since the temperature in a grow tent…
Print approx. €1.26–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Made in two parts. Camera mount is PETG. Base support is TPE 83shore. Depending on the profile of your Kayak switch the rubber support. There is a flat variant or a ‘vee’ variant (recently made for a friend). Uses / connect to standard…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
The Kiev 4 Rangefinder Camera, when out of its leather case, has a tendency to fall forward onto its lens when put on a flat surface. This is a simple solution to hold or to display the camera. it is not perfect. feel free to adjust to…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Protective body cap for Canon RF mount cameras. Designed to cover and protect the camera sensor and lens mount when no lens is attached A simple and practical accessory for storing, transporting, or protecting your Canon RF camera body…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Made a version That can be printed without support as well as a sized down and tweaked version of the piece that mounts to the printer.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
This case is slightly bigger than the previous one. It can take the camera and magnetic lense plus the original apple “Lightning to USB-C Cable”. With this cable the camera works in connection with my iPad air without any problems. The…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
EN: The sun visor is made for a Technaxx TX-28 but may also fit other devices. As the camera occasionally overheats in strong sunlight and only starts up again when the temperature drops, I designed this sunshade. 1 model is split and can…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Modified the arm to be longer. Will crash into the screen if in use. Moved to Klipper so don't need the screen anymore. Because I added a second cooling fan I could not see my prints anymore. Also modified the camera holder to support the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
![Raspberry Pi Camera Adjustable Mount (nozzle view) + X axis strain relief for Prusa Mini - no supports [LEGACY]](https://media.printables.com/media/prints/227703/images/2075843_24d879f2-3462-4f9c-b84c-9b043f0e56f9/img20220618033155.jpg)
