Search results: closure

Sort order

9,724 models

Prusa Enclosure V2 - MMU2S

Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…

Downloads
50,177
Likes
4,044
Rating
4.75
P
PrintablesDom Cis

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research

Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…

Downloads
49,597
Likes
3,820
Rating
4.7
P
PrintablesPrusa Research

Transport handle for Original Prusa Enclosure

Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…

Downloads
17,782
Likes
1,100
Rating
4.91
P
PrintablesClamikra

Core One Enclosure corner seal (snap on corner caps)

The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…

Downloads
10,025
Likes
593
Rating
4.93
P
PrintablesPrusa Research

MINI Enclosure Printable Parts

All printable parts for your Original Prusa MINI Enclosure . The parts are divided into folders to fit according to assembly instructions. Print instructions Download the latest PrusaSlicer and use the following settings**: print…

Downloads
3,795
Likes
318
Rating
4.77
P
PrintablesFAYRON

MACH 1 Gen.1 - Raspberry Pi 5 Enclosure

The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…

Downloads
3,113
Likes
469
Rating
4.94
P
PrintablesTechNerd

AirManagerV2 recirculating air filter for 3d printing enclosure

UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…

Downloads
2,702
Likes
1,501
Rating
4.79
P
PrintablesART TOO

CAN COVER - CAN CLOSURE - CAN LID - (Tested)

Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks

Downloads
2,071
Likes
351
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Downloads
1,941
Likes
781
Rating
4.97
P
Printables3D Sourcerer

Universal 3D Printer Enclosure Standard Build by 3D Sourcerer

Thank you for your interest in the Universal Enclosure Standard Build. All STLs for the Standard Build are below. We also have an additional set of Daisy-Chain and Accessory STLs available on our profile. To purchase the kit for this…

Downloads
1,914
Likes
306
Rating
5
P
PrintablesTdub415

Lack Enclosure Extra Table Connector

Print 4 of these to add a third table to the bottom of a lack enclosure, for additional height. I have lowered the overall height the legs will stand on by 12mm, and removed the slots for acrylic sheets from the original design. Print…

Downloads
1,711
Likes
198
Rating
4.86
P
PrintablesNick Hemingway

Support Wall Bracket For IKEA Lack Enclosure

A wall bracket to securely fasten your LACK Prusa Printer Enclosure V2 – with MMU2S support to the wall to stop it wobbling while printing, but still leaving enough room for the filament to enter the back of the enclosure. (I have a 3…

Downloads
1,048
Likes
233
Rating
5
P
Printablesgeokscott

ESP32 16x2 LCD LoRa Case / Enclosure

Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…

Downloads
956
Likes
51
Rating
5
P
PrintablesFAYRON

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Downloads
752
Likes
43
Rating
4.25
P
PrintablesHotWiL

Adapter for the original prusa spool holder. (For enclosure mod)

I created this adapter to still use the original prusa spool holder with my enclosure.

Downloads
689
Likes
189
Rating
4.76
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Downloads
656
Likes
228
Rating
4.98
P
PrintablesMatt

Single-reel spool holder for Prusa Printer Enclosure V2

Modification of 5-reel spool holder on Prusa Printer Enclosure v2 to just one reel, for users who want the V2 enclosure but don't have the MMU system installed. This is a modification of the spool holder in the V2 enclosure files…

Downloads
651
Likes
65
Rating
5
P
PrintablesAndy26

Original Prusa Enclosure Top Plug PTFE x5 Pass Through

I probably won't use this for my final setup but someone might find it useful. Use the plastic rivets to secure it to the top of the enclosure. I made sure there was clearance. It's designed to be used with the PTFE tubing that comes with…

Downloads
602
Likes
122
Rating
5
P
PrintablesUko

Original Prusa Enclosure Double Sheet Holder (M3 Bolt Holes)

Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures

Downloads
587
Likes
191
Rating
4.95
P
Printablesxro

Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE

This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…

Downloads
462
Likes
24
Rating
0
P
PrintablesTaken4Granted

PRISM: 3D Printer Enclosure

WHY: This began with wanting to design an enclosure system that had significant print time reductions & some interesting features that you could upgrade to later on… The project morphed quite a bit from my initial vision for feasibility…

Downloads
429
Likes
213
Rating
4.25
P
PrintablesVisualReversal

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Downloads
418
Likes
102
Rating
5
P
PrintablesDaHouzKat

Original Prusa Enclosure Folding Door

Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…

Downloads
391
Likes
183
Rating
4.94
P
PrintablesUko

Small Storage Shelf for the Top of the Official Prusa Enclosure

This also fits above the thumb screw of the filtration unit.

Downloads
390
Likes
133
Rating
4.81
P
PrintablesMuramatsu

Ferrite core holder for XP Power external PSU (Original Prusa Enclosure)

Assembly Instructions Set the ferrite core in the holder. Fasten from the back of the frame with screws. To mount the holder you will need the following fasteners: M3x8 screw (2x) Print Instructions print settings: 0.30mm DRAFT filament:…

Downloads
377
Likes
78
Rating
5
P
PrintablesMarkus

Modular enclosure compatible w/ CM4-NANO-B Base Board for Raspberry Pi Compute Module 4

WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…

Downloads
371
Likes
15
Rating
5
P
PrintablesGumbert

Anti-vibration feet for Original Prusa i3 MK3 ENCLOSURE

After building the Ikea Lack enclosure for my MK3 and adding schuetzi99's Anti Vibration Feet ( https://www.prusaprinters.org/prints/1727-anti-vibration-feet-for-prusa-i3-mk3s ), I still noticed some disturbing noise, especially during…

Downloads
362
Likes
86
Rating
4.8
P
PrintablesCzechu

AIOC enclosure

Snap-fit enclosure by SP5CMD

Downloads
359
Likes
27
Rating
4.67
P
Printablestechis

Original Prusa Enclosure RepBox 2.5 Stand

This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…

Downloads
266
Likes
107
Rating
4.77
P
Printablesznerk

MK4 Waste Bin for Original Prusa Enclosure (OPE)

This waste bin fits the Prusa MK4 in the original Prusa Enclosure. It has a cut-out at the front to accomodate the printer holder. It includes the two hooks added by Eisvogel so that the waste bin can be attached to the frame of the…

Downloads
264
Likes
50
Rating
4.86
P
PrintablesCesare Monti

Prusa MK4 + Prusa Enclosure LCD Cables Cover

A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…

Downloads
257
Likes
62
Rating
4.71

Snapmaker 2.0 Touchpad Holder Enclosure Mount

Snapmaker 2.0 touchpad holder T-rail mount for original enclosure (A150/A250/A350) Allows you to place the control touchpad on the enclosure and move as needed. You will need: Original magnetic touchpad mount (remains unused after…

Downloads
257
Likes
40
Rating
5
P
PrintablesMike81622

Original Prusa Enclosure Spool Holder Distance Ring

When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…

Downloads
255
Likes
61
Rating
5
P
PrintablesBelFomDesign

Enclosure large 2kg spool holder - complete

Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…

Downloads
248
Likes
19
Rating
4.43
P
Printablesbuchnema

Filament Pass Thru / Through for Original Prusa Enclosure

There are a lot of filament pass through solutions here on Printables, but I didn't like how they stick out of the enclosure, so I designed these two fairly flush versions. One is for the mid cover part and the other for the edge of the…

Downloads
234
Likes
59
Rating
4.71
P
Printablesreiji

Prusa MINI Enclosure - External Display Housing

This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…

Downloads
232
Likes
109
Rating
5

Large Bin System for Original Enclosure & MK4 (Remix)

Description This is a remix of an excellent set of bin boxes for MK4 + Original Enclosure by @maximweb_1466211. See original model description for more details:…

Downloads
226
Likes
64
Rating
4.8

SSD storage enclosure

A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.

Downloads
221
Likes
16
Rating
0

MK3/MK4 Steel Sheets Holder for Original Prusa Enclosure (Remix)

This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…

Downloads
216
Likes
33
Rating
4.8
P
PrintablesTaneli R

Flexible filament test (TPU/TPE) for enclosure gasket

This is easy and quick test print to explore the use of flexible filament as a gasket material. Part “Body” should be printed from PLA, PETG or other hard material, while “Gasket” should be printed from a flexible material of your choice.…

Downloads
214
Likes
21
Rating
5
P
Printablesmikedmor

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Downloads
213
Likes
41
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem2 Analogue FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…

Downloads
209
Likes
18
Rating
4
P
PrintablesDaHouzKat

Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo

Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…

Downloads
208
Likes
72
Rating
5
P
PrintablesCharleszard

Heltec WIFI_KIT-32 Snap-Close Enclosure

This is a snap-close case for the heltec ESP32 WIFI_kit (this one: https://www.amazon.com/gp/product/B094MYK5DM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) Should print like a charm, but if you need to relax the tolerances more I've…

Downloads
196
Likes
17
Rating
5
P
PrintablesPhil Caruso

Magnetic Waste Basket for Original Prusa Enclosure

I created this Magnetic Waste Basket to provide a convenient place to hold filament scraps and imperfect parts right at my Original Prusa MK4 printer - instead of having to constantly make the trip to the plastic recycling bin. It…

Downloads
176
Likes
78
Rating
4.71
P
PrintablesClamikra

External MMU Mounting System (EMMS) for Original Prusa Enclosure (OPE) and MMU (Ultimulti)

Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…

Downloads
172
Likes
136
Rating
5
P
PrintablesMike81622

Original Prusa Enclosure PTFE Tube Clip

Everytime you're doing maintenance on your MK inside the Prusa Enclosure the PTFE tube for the filament will hang off right in the middle and is always in your face. Or you're using a MMU but still want to run single color prints off the…

Downloads
168
Likes
29
Rating
5
P
Printablesdteng

Multi-Angle Door Holder for Original Prusa Enclosure

This door holder attaches to the bottom screw of the upper door hinges and operates similarly to the way your car door operates. It has detents that hold the door at specific positions (90, 135, and 180 degrees). The door hinges have…

Downloads
148
Likes
45
Rating
4.9
P
Printablesfuchsr

TUSH2-Style Filament Holders for LACK Enclosure

I recently built the LACK enclosure for my Prusa Mk3S. I like it but I hate the fiddling required to put spools of filament onto the included filament holders. So I decided to make a new remix of the spool holders I use for all my other…

Downloads
145
Likes
34
Rating
4.67
P
Printablesnurotikpanda

Original Enclosure Center Plug PTFE Pass-through

This replaces the center plug for the Prusa Original Enclosure. You can pass the PTFE tube from the Print Head to a dry box. For best, performance, replace the FS-Cover with this one . I used this PTFE adapter for my Sunlu Filament dry box

Downloads
144
Likes
26
Rating
5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Downloads
144
Likes
55
Rating
0
P
PrintablesClamikra

Magnetic Table Stand for Ultimulti-MMU (also attachable to Original Prusa Enclosure (OPE))

I wanted the fantastic Ultimulti MMU3 by @David standing on the top of the original prusa enclosure *. Therefore I had to modify the original frame clamp into a stand for flat surface that should not claim to much room of the limited top…

Downloads
144
Likes
40
Rating
5
P
Printablesfuchsr

Removable Tool Caddy for LACK Enclosure using MultiClip Mounting System

I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure…

Downloads
142
Likes
38
Rating
5
P
PrintablesJeyMco

Prusa Mini Enclosure minimalistic + low budget (2mm plexiglass, M4)

My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…

Downloads
142
Likes
36
Rating
0
P
PrintablesJhannes

MK4 Display Adapter for the Ikea LACK Enclosure

You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure

Downloads
138
Likes
39
Rating
5
P
PrintablesDesertStorm

Top Edge Plug with cord pass for Original Prusa Enclosure

Remix of the Top Plug Edge for original Prusa Enclosure with a hole on edge to allow a cord pass through. I needed a plug that allowed my USB cord to pass through and I didn't want to remove the USB end, so I remixed the model to have the…

Downloads
135
Likes
34
Rating
5
P
PrintablesAnotherBrain

Filament Sensor Mount for Prusa Mini Enclosure

This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…

Downloads
134
Likes
33
Rating
4.89
P
PrintableszdenekGGS

Fixing Open door for Original Prusa Enclosure

When handling prints, maintaining or adjusting the 3D printer placed in the Original Prusa Enclosure, the Enclosure door must be open. Quite often the door moves by itself to a position that is undesirable. Using a set of these 3D models…

Downloads
129
Likes
59
Rating
4.71
P
PrintablesChristi Creates

Enclosure -IKEA Lack table foldable door

Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…

Downloads
123
Likes
62
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Cutout Saver

I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…

Downloads
118
Likes
37
Rating
5
P
Printableshectorri

Angled MMU bowden feeder PC4 M10 for Lack Enclosure and others

Compatible Angled feeder to feed five filaments of MMU with PCX M10 ptfe connector. Ideal to place on top of lack enclosure. I'm using with PC4-M10 connectors. Gcodes sliced with PrusaSlicer 2.4.1 version.

Downloads
116
Likes
50
Rating
5
P
PrintablesMichaelQ

Original Prusa Enclosure - MK3S+ Display Cable Quick Release

Owners of the original Prusa enclosure and the Quick Release for the MK3S+ add-on have probably noticed that the LCD display has to be removed, and the cables unplugged every time the MK3S+ is removed from the enclosure. This little…

Downloads
113
Likes
56
Rating
4.83
P
Printablestsil_bill

Prusa XL official enclosure upgrade - Over the top feeding filament

Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…

Downloads
109
Likes
52
Rating
5
P
PrintablesGhezzz96

Raspberry Pi 2/3/3b+ case Creality Ender 3 LCD Enclosure

Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…

Downloads
109
Likes
9
Rating
5
P
PrintablesOpenSrcArchery

Raspberry Pi Pico W DHT22 Temperature Sensor Enclosure

This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the…

Downloads
106
Likes
8
Rating
5
P
Printablessamuel-t

[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)

I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…

Downloads
104
Likes
27
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Downloads
102
Likes
46
Rating
5
P
PrintablesJeyMco

Big clip (closure aid for 12kg dog food bag)

Large clip that works for 12kg dog bags. I use 2 for mine :) Slides on easily enough, while still keeping the bag together (I usually fold/roll the bag top first, then place the clips. Printed with 0.6mm nozzle at 0.35mm layer height with…

Downloads
99
Likes
12
Rating
0
P
PrintablesPatrikus

Enclosure MMU PTFE holder

coupling PTFE tubes from the MMU buffer holder to PC4-M6 quick coupling Components required for assembly: Typ 1: 5x self-cutting screw 3.5x12 2x longer countersunk head self-tapping screws for wall mounting 5x PC4-M6 quick coupling Typ 2:…

Downloads
97
Likes
30
Rating
5
P
PrintablesStrata89

Enclosure doorstop

I was having issues with doors closing by themselves when i did not want them to do so (printing PLA for example) so i decided to create simple magnetic doorstops to hold them open. They use 20*6*2mm magnets (same as the enclosure) to…

Downloads
95
Likes
31
Rating
5
P
PrintablesTillin9

Einsy enclosure for BPI Banana Pi M2 Zero Plus

My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…

Downloads
94
Likes
11
Rating
0
P
PrintablesBM

Integrated Enclosure i3 MK3S (heat chamber)

Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…

Downloads
94
Likes
34
Rating
0
P
Printablesmwalbeck

BME680 Enclosure (Pimoroni board)

This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…

Downloads
93
Likes
5
Rating
0
P
PrintablesNRS91

Prusa Enclosure Top Plug PTFE Feed Tube Guide

These parts clamp around the original PTFE feed/guide tube using factory allen screws and nuts allowing you to feed filament into the Prusa Enclosure through the front top plug. This allows you to use larger spools outside of your…

Downloads
93
Likes
11
Rating
5
P
PrintablesOtty_Skipper

Original Prusa Enclosure (OPE) - Middle Foot

A simple remix of the original midfoot for the prusa enclosure. All you need 2 magnets : 10mm x 2mm just press them in and you're done.

Downloads
91
Likes
29
Rating
5
P
Printablesgybalazs

Prusa Box Enclosure - HEPA & Carbon filter cover for Noctua industrial fan

This cover is based on a newer version of the HEPA filter: https://help.printer-box.com/home/download/#elf_l1_UHJ1c2EtYm94L01vZHMvMDA1X0hFUEEtQ2FyYm9uIF9maWx0ZXI (the one on Printables is the old version) The height of the cover and the…

Downloads
83
Likes
34
Rating
4.5
P
PrintablesJPMakesStuff

USB mount under Prusa Enclosure

Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…

Downloads
83
Likes
36
Rating
5
P
PrintablesZapster

Ikea Lack Enclosure Door knob remix for 6x3mm round magnets

Remix of the IKEA Lack enclosure door knob remix that uses round 6x3mm magnets instead of the 6x2mm magnets of the original remix. For the right door knob, simply mirror the left one.

Downloads
79
Likes
14
Rating
5
P
PrintablesClamikra

External 6x spool mount for Original Prusa Enclosure. Part of External MMU Mount System (EMMS)

This eternal Spoolholder ist part of my EMMS (External MMU Mount System) . Up to six spools can be mounted (each spool runs on 4 bearings). The spool rollers (riders) can adjusted freely along the two smooth steel rods up to 6 pairs. The…

Downloads
78
Likes
36
Rating
4.5
P
Printablessonyslyst

Speaker Enclosure 4"

Speaker Enclosure Designer for 4" Speakers Tested with: Focal 100AC 4" Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes - only needed on bottom part Resolution: 0.3mm Infill: 5%

Downloads
77
Likes
4
Rating
0
P
PrintablesJobPrinter

Permanent spool holder (Prusa Lack enclosure)

This spoolholder fits most common 1 kg spools. It is supposed to be glued on top of the Prusa Lack enclosure.

Downloads
75
Likes
9
Rating
0
P
Printables5Dock3D

Beagle V2 mount for Original Prusa Enclosure

This is a mount for the Mintion Beagle V2 camera compatible with the Original Prusa Enclosure . This mount sits exterior to the Original Enclosure to allow optimal camera angle for monitoring prints or capturing timelapse video for…

Downloads
75
Likes
13
Rating
0
P
Printableszxb466

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

Downloads
74
Likes
23
Rating
5
P
PrintablesGreymanx

Wyze Cam V3 Mount - Enclosure Secure Lock Remix

This is a simple remix of Jerrari's Wyze Cam V3 Enclosure Mount that adds a solid lip to hold the camera base. The original has plenty of hold with just the magnetic force from the camera base and washer. However, I have bumped the camera…

Downloads
73
Likes
14
Rating
5
P
PrintablesAndre Askari

DreDog's Spool Holder for Prusa Lack Enclosure

Instructions and notes: No need for rafts on a print with 0.2mm. The 0.2 quality setting on PrusaSlicer with MK3S comes out really nice. Print the arms sitting on the large diameter edge (cylinder facing up) for best quality. Important…

Downloads
72
Likes
22
Rating
5
P
PrintablesDimTrit

MINI Enclosure USB Port Cover

I did not want, or need, to use the included USB extension that came with the Prusa MINI Enclosure. I utilize Prusa Connect/Link to transfer files to my printer. Not liking the idea of the extension just laying in the enclosure I decide…

Downloads
72
Likes
16
Rating
5
P
PrintablesAndo Roots

Sound sensor enclosure (MAX4466 / D1 mini)

Build an ambient sound sensor. This small box fits a microcontroller and the sensor, is powered from USB-C and looks neat on the wall. My use-case: the sensor measures ambient sound levels in the room, and reports those to HomeAssistant.…

Downloads
70
Likes
8
Rating
0
P
Printablesandyshinn

RAK Unify 150x100x45 enclosure plate 18650 battery bracket

This is a battery bracket for RAK Unify 150x100x45 enclosure plate . It allows you to fit 3 cell 18650 battery packs like the Adafruit 6600mAh 18650 pack . Print settings I used on my MK4 with 0.4mm nozzle: Print in PETG or ASA if using…

Downloads
70
Likes
16
Rating
0
P
PrintablesFokieH

Gehaeuse Heizung / Enclosure Heater

UPDATE 12.11.2024: (Keine Änderungen an Bauteilen / No changes on part design) Ich Empfehle die Löcher für die M3 Gewinde aufzubohren und Messing Gewinde einzuschmelzen, dies funktioniert deutlich besser und ist auch viel Robuster / I…

Downloads
68
Likes
22
Rating
5
P
PrintablesOBA

Prusa Enclosure Enhancement - Concrete Slab integrated in LACK table

General idea Placing a 40x40x4 concrete slab under your 3D-printer significantly reduces noise/vibration transferred to the enclosure. Placing the slab on top of the LACK table causes reduced height needed for the printer PRUSA MK3S+ with…

Downloads
66
Likes
20
Rating
4.67
P
PrintablesMartinRowan

Angled (V Type) Aluminium Profile LED Light Strip Clips for Ikea Platsa Enclosure (Pinmount)

Using plastic pin mounts to secure angled aluminium LED extrusion in the Ikea Platsa enclosure. Simple screwless installation using pin-mounts that fit into the existing holes in the side of the enclosure. Printing Enclosure base mount…

Downloads
66
Likes
7
Rating
0
P
PrintablesClamikra

Removable COVER for LCD-Quick release cable (MK4 or MK3 with Original Prusa enclosure. - (UPDATE 10/24)

Background : I missed a quick release cable for the X-LCD screen of the MK4 in the Original PRUSA enclosure. I like the quick release idea for the powersupply with a single connector. Prusa unfortunately has currently not such solution…

Downloads
64
Likes
22
Rating
4.71
P
PrintablesMachi

Enclosure Nozzle Size Label

Single or Dual-color nozzle size label for Original Prusa Enclosure and Prusa XL 1 a 2 extruder printer. For a perfect look and blend with the cover, I recommend printing in the color combination of Prusa Galaxy Black and Prusa Orange.…

Downloads
63
Likes
15
Rating
5
P
Printablesbuchnema

LED Bracket for Original Prusa Enclosure

I think the LED strip Prusa sells in their shop is too small, weak and expensive. So I bought two meters of a 24V LED strip and aluminium profile and splitted it into five 40cm bars to get some really bright lights into the enclosure. To…

Downloads
63
Likes
30
Rating
5
P
PrintablesObiWanJabroni

Tukkari Prusa Enclosure Top Slot Cover

Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running. There is a little endplay in the slot to allow for the filament to be able…

Downloads
62
Likes
11
Rating
5
P
Printablesfiretech

Removable Sides for Lack Enclosure v2 (Pocket Doors and Original)

I wanted the sides of my Lack Enclosure v2 to be removable for maintenance access (without removing the entire top U-frame), while also using @Drakka01's excellent Pocket Doors remix , so I came up with this. Due to a request, I've also…

Downloads
62
Likes
16
Rating
4.5
P
PrintablesVisualReversal

Basic Board Cover for Original Prusa Enclosure (OPE) - No MMU

The single color version of the basic board cover is great except for one thing; you can't see where to poke it to turn on the fan and light when the room isn't super well lit. So, I decided to make a non-mmu multi-color version. And,…

Downloads
61
Likes
6
Rating
5
P
PrintablesMichaël C.

Support Xiaomi Mijia LYWSD03MMC 2 for Enclosure

Use case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. I added different models in order to fix it or place it in a…

Downloads
61
Likes
16
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Back Widow Left Edge Plug with Cord Pass Through

I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…

Downloads
58
Likes
14
Rating
5