7,238 models
Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PETG, PC and PCCF (tested on Prusament) 15% Grid infill ** Note that print settings are recommended, but you…
A variation of our rocket engine sample model with added side nozzles. It's printable completely without supports. If you own the Original Prusa MK4S, CORE One, or CORE One L printer, you'll find pre-sliced version of this model on the…
(IMPORTANT) Please download the User Guide for HULA v1.0. I do my best to double-check and test the print profile I created. They are up to date with the latest changes made to the designs. If you wish to purchase ready-to-use HULA feet…
Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
From orginal author Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. You must use the gcode file; the 3MF is the PrusaSlicer project. I'm uploading this gcode…
I have prepared the Prusa Core One model for you as a Piggy bank in which you can store your values or gems ;-)
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Prusa CORE One Print Sheet holder Simple magnetic print sheet holder for your Prusa CORE One. This model uses 6x3mm magnets commonly found in Voron projects. This model fits 3 Prusa print sheets. Check out the remixes for different magnet…
Purpose The Prusa Core One (+/L) frame's sheet metal parts do not form an air-tight and dust-proof seal in the top corners. The present corner plug remedies that shortcoming. Features Unobstrusive design Does not need magnets but snaps…
A fantasy knight helmet made in to showcase the print volume of the Prusa XL and CORE One L printers. Featured in the Prusa Academy XL and CORE One L Beginners' Courses. The helmet and visor are printed separately, together, including…
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Spool Holder - Core Edition for FormFutura's Big Cardboard Spools with 2.3kg 3.5kg. And for those big industrial standard plastic spools with 2.3kg or 4.5kg Filament on it! Also works with Prusa's 2kg rPLA and rPETG Spools! Note:…
Prusa CORE One+ and CORE One L 2kg Spool Holder This spool holder is a remix of the official Prusa CORE One to CORE One+ upgrade, adapted to support heavier 2kg filament spools. It uses the standard spool holder puck system, ensuring…
As I wasn't able to find any working nozzle wiper for Core One L due to design changes made, I had to redesign my own one :) Designing and testing took quite a while and DOESN'T break air ventilation opener, so I'd be happy if you leave a…
Quick remix of Pejek's build palte holder for the core one. I changed all slots to 1.5mm to handle the OEM Prusa Build plates and added a small handle to pull the holder off. Uses 10x2mm magnets. I have uploaded the F3D file. DO NOT USE…
The remover has no blade it uses some little PETG teeth as a saw. You can print the handle and the remover in different colours and after that you can screw both parts together. The 10 mm screw ist well protectet. It is a PETG "appliance"…
This vent slide and handle for the Core One+ allows the magnetic cover I designed for the Original Core One to be used with automatic vent operation on the Core One+. It replaces the vent slide of the original design; all other parts for…
Sliced for Prusament PETG. Refer to the original model for more information: https://www.printables.com/model/1189256-vfa-test-prusa-core-one
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE+/CORE ONE L+ add a like
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Unfortunately, this case https://www.printables.com/model/1193119-esp32-camera-mod-for-core-one was too small for my ESP32-CAM (AI-Thinker and clones). So I modeled a similar one from scratch. Update, March 9th 2025: Created a new version…
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Prusa Core One Rubber Foot Holder – Adhesive‑Free Upgrade The adhesive on the Prusa Core One’s rubber feet has always been an annoyance for me, and with some inspiration from Prusa Core One Feet v2 - Prusa rubber feet reuse by Ondrashek ,…
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…
Nexdruder Lever Mod from Jürgens Core One Automatic Chamber Vent.
Hey there! I’m a big fan of David’s side storage solution for the CORE ONE. But if you’re like me and just need the tool holder or don’t want to waste time searching for the perfect magnets online, this is a simple solution that uses…
General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…
The CORE One LED Status Bar lets you see the printer status color, even when the LCD panel isn't above a surface. No post-processing or additional hardware required (press fit) Print Settings -Print it out of either clear PETG or clear…
Designed for the original MK4S/Core One knob.
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Thanks to Stefan from CNC Kitchen for the great model. Easiest way to print is loading the 3mf file. If you want to use the stl load the filter stl right click on the core one filter in the right dialogue add modifier > load … right click…
🤖 Cybercore Gauntlet – Futuristic Power at Your Fingertips ⚡ Step into the future with the Cybercore Gauntlet , a sleek, sci-fi inspired mechanical hand that looks like it came straight out of a high-tech exosuit or cybernetic lab. With…
Add a [labeled] handle to your box allowing easy identification from the front! This handle should fit the default V2 Prusa Tools Box (InnerBoxWidth=180, ScrewLength=30) by @3DesignsCH . Install using 35mm screws (rather than the 30mm…
I created this minimalistic "handle" for opening and closing the vent. The installation is easy: Remove the middle screw and nut. Place the nut in the handle and flip the screw upside down. I myself keep the nylon part on top to safe the…
The ferrite core hangs around a bit, because the cable to the basic board is just too short to accommodate the core in the enclosure. Maybe the cables for the basic board differ, mine is a bit too short at this point. With the model you…
It has been my experience that HEPA/Activated Carbon filters are rather expensive. So, I was delighted to find these P60 filters ( Non-affiliate Amazon US link ) at a resonable cost (~$5 each). I've been using them in my house in the…
This is a Flat Cover for the CORE One LCD. its prepared for Multicolor printing. just insert the transparent light bar and the Knob - DONE! The new Displaymount for the Cover is also included and prepared. IMPORTANT: activate “ One…
To be used between CoreOne and your drybox. Easy to install, easy to use. Just few grams of filament and few minutes to print. Instal with bigger chamfer towards the printer. Check internal opening for smooth filament movement in and out…
Core One Fish : The Coreoperca Not one of the lucky few that got this ugly fish for doing a review? Fear Not! I bring you the aptly named Coreperca an East Asia perch that prefer clear, slow-moving currents in the middle reaches of…
A vertical steel sheet holder for the Prusa Core One L. Will hold two steel sheets. Default print profiles should suffice. Print at a 45 degree angle to fit the bed sheet. IKEA SKÅDIS model available for those that want to wall mount.
Spool Holder - Mini Edition for FormFutura's Mini Cardboard Spools with 250g filament. Also works with small plastic spools. The Max spool diameter it could handle is 150mm. Note: This is just for fun if you want a cute beefy…
This remixed xLCD cover is best printed with 5 x 0.25 tools to ensure the logos are as sharp as possible, I have also enabled PETG supports on tool 6 with a 0.4 CHT tool. This has been tested on the R3 xLCD.
The best Filament warmer and dryer in one can now be placed on TOP of the Prusa Core One! The cross bar is only if wanted (Hexagon long stick) for more stability, and 5mm will also do in thickness at the back, but I recommend two times…
I made this holder for the Covert Instruments lockpicking practice core, because the core is not very comfortable to hold in your hands. This print should make it much more comfortable. I made two versions; one is slightly shorter so you…
You can simply print it in any PETG. During assembly, I recommend using the pliers included in the Prusa kit to make the job easier. Once the chain is assembled, move it by hand to clean off any burrs on the pins.”
Modular Tool Holder System for Prusa Core One/+ Module Dimensions Base module and tool holders: 20 mm wide Spacer module: 10 mm wide Magnet slot / lock plate size: 6x2 mm Key Features Fully modular and configurable design Tool-free…
Ochrana na displej k tiskárně MK4 Tisknuto s tryskou 0.4, výška vrtstvy 0.10mm a změnou barvy v průběhu tisku Tisknuto z PLA, výplň 15% Screen protector for the MK4 printer Printed with nozzle 0.4, hole height 0.10mm and color change…
This support props up the end of a 2 kg spool, without having to change the original machine or modify its footprint. It shares the weight bearing on the original spool support. There is a slot on the back to hang it up on the wall when…
Summary This is a nozzle wiper for the Prusa CORE One which mounts to the gantry. This allows for wiping the nozzle at any point during a print. The installation is toolless and easily reversable. This was inspired by the Nozzle Wiper V2…
Mit diesen Griffen kann man seinen Core One farblich so gestalten, wie man möchte bzw. wie die anderen Teile – Spulenhalter, seitliche Griffe usw. – sind. Montage: Als erstes entfernen Sie den geklebten Metallgriff vorsichtig, falls er…
Summary This is a nozzle primer for the Prusa CORE One which mounts to the gantry. This allows for nozzle priming/purging at any point during a print. It removes the need to have any priming or purging directly onto the build plate. The…
As many have mentioned there is an issue with the 1storage_core.3mf file. I have just repaired it and posted the repaired file and gcode to help others not fall victim to the failed print I did.
This models holds all the tools that come with the Core One and a folding rule safely. It also holds some calipers, but not as securely. It's good if the stand just stands there, but it's not designed for action. While this is not a…
Hello together, sometimes I have the issue that a full spool at the Prusa Core One leads to some troube with self unwinding layers. Lets call it de-spooling. I had one failed print because of that problem. To reduce/avoid this problem…
Filament entry funnel for the Core One
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Simple octahedron counter to track score in your Riftbound game. Designed for multimaterial but can be printed from single material - digits are recessed.
Filamentive introduced a new spool core. This is significantly smaller than the original refill spool. Printed in PETG at 0.2mm layer height.
This is an update to my original Buddy 3D Camera Redux - now specifically made for internal mounting to the Prusa Core One. The design is simplified and still clicks together with no screws, but is also much more robust. I chose to drop…
This is designed specific to the dimension on the Normcore Breville espresso machine portafilter. The Normcore portafilter was slightly different than the Breville portafilters and using other funnels didn't quite fit. The inside…
## English ## I modified the original Prusa Core One Plus spool holder by separating it in PrusaSlicer, removing the thick section, extending the thin section to 6 cm, and then reassembling the parts. No O-ring is required. This allows…
When printing in a relatively humid location, it is preferable to print directly from filament dryers or dry boxes, keeping the filament enclosed in PTFE tubing all the way to the printer. This filament sensor top for the CoreOne INDX was…
USB Hub: https://www.amazon.ca/dp/B0CD1BHXPZ Uses four 6x2mm magnets Printed in PETG
The filter is 0.4mm thick. You can customize the hole size by changing the infill % of “core_one_filter_C1” in core_one_dust_filter_C1.3mf. Install dust filter between the top panel and the vent cover. used settings; 50% infill % in the…
Preparing the print Open the 3mf file as PrusaSlicer project (settings for Prusa XL will be loaded). If you a have a different machine than Prusa XL , to get more transparency you need to apply to your machine the settings I used from…
CORE one HEPA filter solution that doesn't restrict air flow from printer. Utilizing a standard Honeywell “D1” HEPA filter, the printer can be pushed against the wall while maintaining a large cross-sectional flow area. Components are…
Prevents ventilation to close during printing or by accident. use PETG 0.2mm layer
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
This is my take on a custom filter add-on for the Prusa Core One. Based on the idea of PrusaPilot to use a Tesla Model 3 HEPA filter, I optimized my design for print speed (<2h, 0,25mm SPEED profile on Core One with 10% infill), filament…
https://www.rcsb.org/structure/1aoi
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
Remixed waste bin with enclosed magnets. NOTICE: This is just a crude modification.
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
I noticed that when printing with ASA filament, it takes more than 20 minutes to heat the chamber to 55°C. That's why I decided to make an adapter mounted in the top vent grille so that you can raise the temperature faster with a hair…
Remix of the excellent squash ball feet for the Prusa Core One/+ by @dancan13f . The original creator recommends using squash balls with blue dot as they are the hardest. You will need one M3x6MM screw per foot to fasten it to the Core…
A simple case to protect your spare Nitecore NL1416R battery when it's rattling around in the bottom of your bag while it's not in use. Cap comes on and off with a satisfying “pop!” Print with the open ends of the case and cap facing up.…
Foam core stand for signs or whatever. includes slots for zipties. Included FreeCAD source.
Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html
The direct mounting of the HAFC V2 onto the original PTFE tube of the CORE One / + is inadequate (there is too little space) and looks unattractive, so I looked for a better solution. The idea was not to rigidly mount the HAFC V2 housing…
Inspiration My prusa CORE ONE kit didn't come with enough M3nN nuts, so I didn't have enough for the middle screw on the top vent slider. This design uses an M3nS nut instead; I had extras of those. Printing To match the other printed…
This part is intended to be installed between the top cover and the vent cover of the Prusa Core One. It acts as a barrier to prevent insects, which are attracted to heat or light, from entering the printer. I designed it to use minimal…
Update 2025-11-22: Changed Part 2/2 for “Core One +” Check out here: https://www.printables.com/model/1489980-prusa-core-one-top-cover-with-automatic-vent-indic I had to split the entries due to different license restrictions of the…
This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…
Splitter for IR sensor Prusa Core One - version 2 from the previous version has modified filament routing through the IR sensor and shortened input splitter so that filament ejection is fully functional. The proposed solution does not…
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
This is a simple hydrometer, humidity meter, holder using three 8x3mm magnets. You can replace the hydrometer battery without removing if from the holder. You can use any material to print it. I used PETG. Hydrometer:…
The original nozzle wiper compatible with the purge bin was too small for the A1 silicone brushes I purchased. The wiper, which I remixed here, fits the silicone brushes, but is a bit too long for the space/cutout of the purge bin . So I…
Are you constantly worried about your scraching or even worse damaging the LCD screen on your Prusa printer ? Do you tiptoe around it like it’s a fragile artifact in a museum? Well, worry no more! With my simple yet effective LCD cover…
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+. It can be configured in multiple ways: Allow the install of a USB…
A simple handle to control the airvent on the Prusa Core One. It has an “open/close” text on the front and two arrows to show the direction. Its also makes it easier to open the top window.
