Search results: trap

Sort order

5,001 models

P
PrintablesJan Štech

Bottle Wasp Trap

The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7,414
Likes
2,600
Rating
4.84
P
PrintablesMatsErik

Fruit Fly Trap for Soda Bottle

Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
2,788
Likes
377
Rating
4.74
P
Printablesdj_redbird

Tripp Trapp Trofast Clip (metal basket)

The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant

Downloads
2,211
Likes
107
Rating
4.44
P
Printablesjohnsonfarms

Finger Trap

This is a simple Finger Trap, base size works well, but it seems best at 150% and even 200% scale. The setup is similar to real traps of this style. The kids like sticking candies on it and waiting for friends to try and grab them. The…

Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant

Downloads
2,029
Likes
321
Rating
4.47
P
PrintablesMatsErik

Fruit Fly Trap for Soda Bottle

A trap that works. Those nasty little buggers love getting in, have no clue how to get out

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,993
Likes
236
Rating
4.88
P
PrintablesWindy

Trapezoidal lead screw Nut tr8x8-4

Trapezoidal lead screw Nut tr8x8-4 for the Trapezoidal lead screw tr8x8 Print instructions Print it slow, optimal height of layers is 0,15. Thinner layers mean smoother movement.

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,768
Likes
103
Rating
4.33
P
PrintablesObe_Design

Cargo / Ratchet Strap Clip – for 25mm Straps

This 3D-printed cargo strap clip is designed to slide over a rolled-up cargo strap, keeping it neatly coiled and preventing it from unraveling during storage or transport. Perfect for keeping your garage, workshop, or van organized! These…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
1,578
Likes
995
Rating
4.96
P
PrintablesVerender

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,566
Likes
581
Rating
4.88
P
PrintablesDunRock

Quick Side-Release Strap Buckle

!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,492
Likes
177
Rating
5
P
PrintablesLali

Tetrapod

A miniature of "tetrapod", a concrete breakwater structure. The dimensions are based on this page from a Japanese company. Default size is about 5 cm in height. The model in the STL is in a position that seems easier to print. But there…

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant

Downloads
1,391
Likes
157
Rating
4.92
P
PrintablesNils Kal

Passe Trappe - The Fast and Addictive 1 vs. 1 Game

Here is my design of the board game "Le Passe Trappe" (also known as Flitzpuck). It's a fast and addictive game for two players. The print contains all required parts, the only extra hardware needed is a rubber band (I've used a hair…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant

Downloads
1,326
Likes
653
Rating
4.71
P
PrintablesPrusa Research

Mask strap extender

The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
1,079
Likes
91
Rating
5

The PrusaWatch - Individually modifiable Band / Strap in for watches in TPU

The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…

Downloads
985
Likes
199
Rating
4.89
P
PrintablesIan Foulds

Mason Jar Wasp Trap

This print is a threaded to be a standard mason jar lid. Just put some bait in the jar and the pests fly in and are unable to find their way out. Has a convenient spot to hang the trap should you want to. I suggest not using sweet bait as…

Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant

Downloads
837
Likes
309
Rating
5
P
Printables3Dean Printing

Five Nights at Freddy's Glitchtrap

Huge Fan of Five nights at freddy's and for those who are fans too, I created glitchtrap from FNAF Vr Help Wanted. This took me about 2 days. One of my favorite models I have created. Print instructions Print with supports, 0.2-0.3 layer…

Print approx. €21.32–€26.06 excl. taxPreliminary estimate for one variant

Downloads
600
Likes
75
Rating
0
P
PrintablesRaQic

Flexible strap (printable) - Prusa Face Shield

Printable flexible band used instead of rubber / elastic band for Prusa Protective Face Shield. 2 versions of the strap: straight angled Fast printing (about 20 minutes) - PETG Use spatula to remove the prints while heatbed is cold. Print…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
568
Likes
12
Rating
5
P
PrintablesAllpa

Edge protector for 1" lashing straps / Kantenschutz für 25 mm Spanngurte

Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
518
Likes
47
Rating
5
P
PrintablesPedralias

Hornet Trap (Bee-Safe)

This is a hornet trap that you can screw on a "Bonne Maman 370gr" glass container to trap hornets. (It fits on mostly every brand like Aldi, AH, Carrefour, …) You can place this model on its side as advised by a beekeeper. This way bees…

Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant

Downloads
475
Likes
91
Rating
4.56
P
PrintablesMichal Fanta

Flexible Watch Straps

The flexible strap replacement Swatch Irony Chrono 19mm watches. Three kinds of watch straps Classic, Flex, and Fitness.

Print approx. €4.58–€5.59 excl. taxPreliminary estimate for one variant

Downloads
434
Likes
184
Rating
4.75
P
PrintablesMini

Meta Quest 3 Knuckles - Controller Grip Strap

After searching for a knuckle strap for the Quest 3 controllers I couldn't find any to buy or print which i liked. So i decided to modify the model of SSpt to get a feeling like with the strap on the Valve Index Knuckle controllers which…

Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant

Downloads
380
Likes
87
Rating
5
P
PrintablesMatthew

Curved Quest 3 Adapter for Quest 2 Headstraps

None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
377
Likes
62
Rating
5
P
PrintablesErik

Stokke Tripp Trapp Toy hanger

My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
371
Likes
31
Rating
5
P
PrintablesKibbieKatt

MattHub Case Mount with Lid for Bigscreen Beyond Audio Strap

This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
348
Likes
12
Rating
0
P
PrintablesSpool Designs

Fruit Fly Trap - Single and Multi-Material

Apple Fruit Fly Trap Fill ¼ - ⅓ full with apple cider vinegar and close the top. Discard after extended use, do not drink fruit fly filled apple cider vinegar. Printing Instructions Supports Required. Timelapse

Downloads
347
Likes
42
Rating
5
P
Printablesanimatorgeek

Convoluted Kinematic Coin-Sorting Contraption

Update 11/8/2022: Added STL versions of all the part files (previously I only uploaded 3mf and gcode files). This is a coin sorter that uses the weight and size of the different types of US coins to sort them into four columns – 1, 5, 10,…

Downloads
345
Likes
261
Rating
5
P
PrintablesFiveAngle

Prusa i3 MK2/3/S/+ Y Chassis Integrated Bushings (and Bearing Straps)

Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
322
Likes
34
Rating
5
P
PrintablesCatja

Webbing/Strap Clip Accessory for Thermacell MR300/450

While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…

Downloads
309
Likes
62
Rating
5
P

Adjustable sternum/chest strap attachment

An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
288
Likes
100
Rating
5
P
PrintablesPo1nt

JoyCon Straps

I've lost my JoyCon straps and found hard to find replacements online. So I designed a 3D printed replacement that works just as fine. Print is provided with two design variants. One screwed, one glued. You'll need a few aditional acces…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
54
Rating
5
P
PrintablesManü

Fruchtfliegen Falle / Fruit fly trap

Kleine Insektenfalle. Dies ist der Deckel für ein Weinglas oder eine Vase. Ich habe 3 Modelle mit unterschiedlichem Durchmesser (80mm, 120mm und 160mm) als Vorlage abgelegt. Einfach das Glas mit einem Obst befüllen und abwarten. Die…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
251
Likes
25
Rating
4.75
P
PrintablesMre

Fitbit Versa Watch Strap

Customization watch strap for Fitbit Versa Print instructions Nozzle; 230 C remove stringing if any with a hot needle. ABOVE SETTINGS BEING UPDATED- WILL HAVE NEW GCODE 5-19-19

Downloads
241
Likes
16
Rating
0
P
PrintablesTWB

Anti-Slip Strap Assist

Suggested print settings: Layer height 0.2mm. Infill 30%. Perimeters: 5 (for strength). No supports needed. More durable in PETG Changelog 5 Jul 2024: Added two (4mm wing & 6mm) new options. Explore other backpack accessories HERE . NOTE…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
157
Rating
5
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant

Downloads
200
Likes
100
Rating
0
P
PrintablesLuluX

Scraper with 60 mm trapezoid blade

The original handle of my scraper was not holding the blade, while I was removing a sticker, so I created more secure handle. The blade can be easily pressed into the handle and sits firmly without play. From above the blade is secured by…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
195
Likes
15
Rating
5
P
Printablesamtechrs

Bait Jar for Crab / Shrimp / Crawdad traps

UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…

Downloads
190
Likes
15
Rating
5
P
PrintablesToast123

Trapped Dice! Fast Print

Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
27
Rating
0
P
PrintablesKwadrat3D

Truncated cone for fruitfly - fruitfly trap

If you have a problem with fruit flies use my truncated cone. Pour a little apple cider vinegar into the cup and then put the cone in it. Wait. The bow ties will fall in and won't be able to fly out. Some of them will drown. An…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
172
Likes
40
Rating
5
P
PrintablesBooks

Pentagonal Trapezohedron

A pentagonal trapezohedron, a popular shape for 10-sided dice. Dimensions are based on adding pentagonal pyramids to a regular dodecahedron.

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
6
Rating
0
P
Printablesromcoromcoromco

UltraPro one touch TCG cards stands and wall mount

UltraPro one touch TCG cards stands and wall mount New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display Wall mount and stand for Ultra Pro One Touch…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
21
Rating
5
P
PrintablesChillyPenguin

Spool for Cam straps

Tired of tangled Cam straps? This is a spool for keeping Cam straps tidy between uses. Designed for 25mm Cam straps upto 4.5 metres in length. Print instructions I recommend PETG or other more flexible filament than PLA to allow the two…

Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
163
Likes
47
Rating
5
P
Printablesloidolt

DeWalt Weed Whacker Strap Mount

General Info This shoulder strap is designed to accomodate a DeWalt cordless wheed whacker, but would likely work with any standard size weed wheed whacker or edge trimmer. The two halves of the clamp attach with M5 hardware (be careful…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
46
Rating
3
P
Printablesishikawats

Opera Fruit Fly Trap

This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
34
Rating
4.75
P
PrintablesKRENN DESIGN

Fruit Fly Trap

Fruit Fly Trap Simple, highly effective fruit fly trap with a sleek, modern design. For print to be completely watertight, I highly recommend applying a clear coat or epoxy sealant. Size - 50mm x 50mm (Diameter x Height)

Downloads
101
Likes
16
Rating
4
P
Printablese-magine3d

Selective Asian Hornet Trap – Square Design

With its 8 mm central hole , it allows Asian hornets to enter while preventing them from escaping. Smaller surrounding holes ensure non-target insects can safely exit. Key Features: Selective Design: Avoids trapping non-target insects.…

Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
100
Likes
8
Rating
0
P
PrintablesAryser

Fruit Fly/Wasp Trap for PET Bottle

Be award, insects belong to the ecosystem like all beeings! Print in one or two colors. The colour of the cap might influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
19
Rating
0

Female Buckle Replacement for 15mm Strap

This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
15
Rating
0
P
Printablesslelham

Magpul sling adapter for peak design straps

wanted to use a Peak Design Camera strap as a sling. Designed this for it to go through the magpul sling mount the peak design anchor keeps it in place. I printed this in PETG at 100% infill

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
20
Rating
0
P
PrintablesShwalamazula

RGB Trap Doors

This is a trap door off the 1989 Kenner, The Real Ghostbusters, Ghost Trap. On these old toys, it is not uncommon to find the doors with the engagement pins broken. This will allow you to print off a replacement to restore the toy. I have…

Downloads
82
Likes
10
Rating
0
P
PrintablesWim V

TULAS: a universal hanging/strapping system

The idea. I was looking for a safe, strong and flexible solution to attach something to a dog's collar. Soon I thought of the silicone rings on the ends of objects as they are often used. On my desk was a sample of TPU filament (I had…

Downloads
71
Likes
40
Rating
0
P
PrintablesMohan Das

Hood with solvent trap for Rheometer

This hood is designed as a solvent trap for samples being tested on Anton Paar rheometers that have volatile solvents. The design has been tested successfully and provides sample stability for at least 24 h. Note: Please remember to seal…

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
0
Rating
0
P
PrintablesPDB

Smartrapcore ALU to Hypercube Evolution conversion

Re-design on XY top frame to match the X-Carriage for the Hypercube Evolution, but to re-use the existing 8mm rods, aluminum frame, 8mm linear bearings and not sacrifice any build volume. Also wanted to keep the belts parallel or…

Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
67
Likes
8
Rating
0
P
PrintablesCarlos Luna

7 Trapeziums Symmetry Puzzle

A simple puzzle I designed myself: The objective is to use these pieces to form a plane figure with an axis of symmetry. There are 2 closely related solutions. See if you can find both!

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
10
Rating
0
P
Printablesbubblebasti

Ice Breaker / save the penguin / ice trap boardgame

IMORTANT NOTICE: This design is completely made by me, it may not fit to original buyed variants. Parts to be printed (15% infill): 1x Body 1x Hammer 6x Leg 43x Block What you additionally needs: a figure or other toy that serves as a…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
8
Rating
5
P
PrintablesDNELMS

Face mask strap clip to prevent skin irritation.

I made this because some masks strap behind the ears and I find this very irritating to my sink after a short time. This allows you to strap the elastic behind your head. I added multiple catches so that it should work with varying…

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
1
Rating
0

Watch strap pillbox / Pastillero para la correa del reloj

Watch Strap Pillbox : A small, comfortable, and discreet pillbox designed to be placed on the watch strap. It is specifically crafted for individuals with cardiac issues to comfortably carry two nitroglycerin tablets, ensuring they are…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
4
Rating
0
P
Printablesprint by Matěj

Strap Tension Hook – Adjustable Strap Lock

This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
11
Rating
5
P
PrintablesCrazyRonny

Ducting 6po Bracket / Strap

Was working on my miniature paint boot (using our old range hood) and I was in need of a bracket for holding a 6 inch duct… so here it is if someone need this also. Can surely be resize in X and Y axes to fit other size ducting. (Edit:…

Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
4
Rating
0
P
PrintablesCtibor Novotný

Dummy 13 trapeze

The trapeze to let you Dummy 13 show her / his acrobatics skills in the full scale. Enjoy.

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
26
Rating
0
P
Printablesbart

Contraption for drying diving hoods

Ever had an idea, started the design work, realised halfway through that it would look ridiculous, but followed it through to the end anyway? Well, this is the result of just such a process. In the latest of ridiculously over-designed…

Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
14
Rating
0
P
PrintablesRPK

Stickers-Stick for Yellow Sticky Stickers/Cards Traps

EN: There are yellow sticky cards on the market against fruit flies, bugs and the similiar, which these insects seem to love. However, the sticks that came with the stickers were too short for me. So I made longer ones. Material: PLA…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
7
Rating
5
P
PrintablesPaul C

Bud (bedbug) trap and indicator baseboard style

A Parametric barrier and bug trap - works on all kinds of crawling bugs including bedbugs and silverfish CURRENTLY stl are for 2" tape My building has had bug problems on and off and the best way to not become a statistic was to put Down…

Downloads
46
Likes
7
Rating
0
P
Printablescookiecrook

3mm cable strap / wire strap

I couldn't find a wire/cable strap that was this small, so I modeled one. Ideally use ASA for its superior UV resistance, but PETG will be okay not in full sun, and even PLA may be fine for interior use.

Downloads
44
Likes
6
Rating
0
P
PrintablesDirk Hofmann

No-scratch Feet for Stokke Tripp Trapp

Replacement feet for Stokke Tripp Trapp Attach a self-adhesive felt glider (3mm plus thickness) cut to fit the cutout in the printed part to prevent scratching the floor Autodesk Fusion file included.

Print approx. €0.36–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
2
Rating
0
P
PrintablesShwalamazula

RGB Trap Belt Clip

This is a model of the belt clip off the 1989 Kenner, The Real Ghostbusters, Ghost Trap. I have modeled this off an existing, intact, belt clip. This will allow you to print off replacements to restore the toy. GBFans Project Print…

Downloads
35
Likes
6
Rating
0
P
PrintablesJoe

Backpack strap clip

Helps to bundle up excess lengths of backpack strap.

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
8
Rating
0
P
PrintablesMagnetikk

Minimalist Strap Buckle / Ribbon Fastener (10mm)

Specifications Compatible Strap Width: 10 mm (with 0.5 mm tolerance on each side) Strap Thickness: up to 1.8 mm Dimensions: Very small, lightweight, and low-profile How to use Insert: Take one end of your ribbon/strap and push it from the…

Downloads
30
Likes
2
Rating
5
P
Printablesajetlaggedrobyn

Yucatec Maya Tetrapod bowl

Hey Everyone! As I've been studying the Yucatec Maya people and I've found what I've learned interesting, but over the past three months one bowl stood out to me for some reason. The model was an interesting challenge because it wasn't…

Print approx. €12.30–€15.03 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
10
Rating
0
P
Printablesrj_ruin

American Morse Equipment keyer base and leg strap attach plate

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29
Likes
1
Rating
0
P
Printablesnetpaq

Meta Quest 3 - Active Straps Colored Identifiers

Nothing much to say here… Simple design to distinguish between multiple sets of controllers with the official Meta Active Straps. It could also be used to easily identify left/right controllers (print one color for right and another for…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
12
Rating
0
P
Printablesmach

Strap Pad

19x19mm pad for double sided tape.

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
0
Rating
0
P
Printableshachleitner

BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones

BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
1
Rating
0
P
PrintablesRae

Cap for bolted trap screw

One of the things I enjoy about 3d printing is fixing broken stuff which may either be unavailable or expensive. Recently i found the cap on the bolted trap screw for the stormwater pipe shattered to the point that I only had a shard…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
0
Rating
0
P
PrintablesMarc

strap/tension belt mount for motorcycle crashbars / Spanngurthalter für Motorrad Sturzbügel

I secured my bags against movement with these tension belt mounts. Tested on a 3 week offroad morocco trip without any issues. The outer diameter of the crashbar is 20,3 mm (0.8 inches). The screws used are M6x20 and a locknut. I…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
4
Rating
0
P
PrintablesJonathan Kayne

The Contraption - CFT1 Edition

The Contraption is a 3D printed case that combines a radio, battery and antenna into a single setup. Mike and Becky over at Ham Radio Duo have created a version for the QMX, and I have made a version for the CFT1, which effectively turns…

Print approx. €5.64–€6.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
2
Rating
0
P
PrintablesCharles Clare

Hamina Nomad NXT-2000 Spectrum Analyser Strap Holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that connects to the strap of the Hamina wireless Nomad. Designed so you don't break the USB connector when using the NXT2000 with the nomad and onsite. https://www.hamina.com/…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0
P
PrintablesEva Máčová

Paper or Tetrapack simple label

Labels for easy recycling of paper and tetrapack in czech, german and english languages.

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
4
Rating
0
P
PrintablesV.

Discrete 2 pieces Straplock - 14mm inside hole

Inspired from other projects that were not printable, I decided to rebuild it from scratch. The goal was to make 2 identical pieces that fit perfectly together. I also provided a system to make them “clamp” together. These have been…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
1
Rating
0
P
PrintablesWheart

Mounting strap for junction box

Simple strap to mount electrical junction box on wire fence (but may have other uses).

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
4
Rating
0
P
PrintablesBooks

Tetrapak 240mL Milk Carton Lip Ring

Ring to re-enforce the lip of a 240mL tetrapak carton.

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesREMLURELMI

Multimeter Strap Lead holder with Extra Fuse Storage

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Brim: Optional

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
3
Rating
0
P
Printablespictorf

Tetrapod

Concrete block to be piled up to protect sea shore Printed in PLA, 200 µ layer. I used support on the printbed.

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
2
Rating
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
PrintablesJT3D

Trappe à pile pour console Bandai champion racer - Battery Door for Bandai Champion Racer Console

Il faut imprimer la trappe coulisse vers le haut. Pas besoin de support mais il faudra bien gratter les coins pour un bon ajustement. La partie OPEN est fournie dans un fichier SVG annexe. Pour le mettre en place utilisez clic droit sur…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesExtrutim

One For All | Cable Strap | Print In Place Clamp | Belt

A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But…

Downloads
13,790
Likes
5,110
Rating
4.86
P
Printablesklworx

Fruit Fly Trap

Fruit Fly Trap with Secure Lid A compact and functional fruit fly trap designed to blend practicality with modern style. The container features a sleek hexagon-patterned body for a clean geometric look, while the textured lid provides a…

Downloads
13,464
Likes
4,021
Rating
4.59
P
Printablessquinn

Fruit Fly Trap Mason Jar Lid

A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…

Downloads
10,454
Likes
2,010
Rating
4.9
P
PrintablesHaydn Bao

Meta Quest 3 - Quest 2 Head Strap adapter (now with STEP file)

This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…

Downloads
9,427
Likes
449
Rating
4.7
P
PrintablesKasurai

Halloween Mini Monster Trap (100% 3D-Printed)

Halloween Mini Monster Trap >:D Print Recommendation: Material: PLA, PETG Infill: Grid Infill → claw holder (100%), all other parts (20%) Perimeters: 4 Perimeters Supports: No supports → With the exception of the plate! (Support on build…

Downloads
6,028
Likes
1,896
Rating
4.83
P
PrintablesMaxT

Tripp Trapp Stokke Chair + IKEA Trofast plastic storage box combo (v4)

https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…

Downloads
5,394
Likes
359
Rating
4.97
P
PrintablesJarda Linek

Fruit fly trap

Návnada - řezané kuličky hroznového vína

Downloads
5,297
Likes
713
Rating
4.93
P
PrintablesRoostaff

Vrai Piège à Frelons original à visser Nutella, Le Parfait, Bonne Maman bocaux ou pots avec antipluie suspendable/ Real Screw original Wasp Hornet Trap Nutella,Le Parfait, Bonne Maman jars with anti rain hat suspension

Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…

Downloads
5,293
Likes
429
Rating
4.97
P
PrintablesMikolas Zuza

Guitar strap lock

This 10-minute print can prevent your guitar from being dropped and getting damaged. I have never dropped my guitar like this. But my favorite strap has quite a loose fit and I caught the guitar several times just in time after the strap…

Downloads
4,946
Likes
865
Rating
4.9

Mini bear trap keychain remix

This is my remix of ItsOnMyMind's design for a working bear trap keychain. His original model is from Thingivere if you want to check it out. https://www.thingiverse.com/thing:3769837 This remix is optomized for two elastics, any elastics…

Downloads
4,566
Likes
1,244
Rating
4.6
P
PrintablesAnneVanLeyden

Turn any jar into a fruitfly trap

This parametric OpenSCAD model allows you to generate a fruitfly trap for any jar that you have lying around. Measure the outside diameter on the thread as shown in the picture. There will be an extra 0.5 mm of clearance added in the…

Downloads
4,246
Likes
2,804
Rating
4.88
P
Printablesbcool1313

Springtrap 13 (UPDATE)

Hello, This is a articulated springtrap figure it has four swap out heads closed mask, mask open, laughing, axe in head I also included a knife and an axe ,hope you enjoy Added: leg and hip withering. New hands are coming soon

Downloads
3,918
Likes
646
Rating
4.29
P
PrintablesCapra-Audio

Capra Straps

Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…

Downloads
3,241
Likes
127
Rating
5
P
PrintablesMartunex

meta Quest 2/3/3s Stand Kiwi Design Strap w/Battery

NOTE: no need to print the wings V3 if you decide to print the V4 and viceversa, the same goes for the quest_stand, the only difference between the 2 is the text on the base. Update 03.07.24: New improved Controller wings and HMD model,…

Downloads
3,166
Likes
443
Rating
4.88
P
PrintablesPiitaya

Tripp Trapp adapter for IKEA TROFAST

Tripp Trapp adapter for IKEA TROFAST Mesh storage box. I tested with the french product ( https://www.ikea.com/fr/fr/p/trofast-boite-de-rangement-en-filet-gris-fonce-60518453 ) but it should work with one from any country. The dimensions…

Downloads
3,122
Likes
156
Rating
4.74
P
PrintablesBen

Apple Watch Strap /Band Holder - Large

A tray to hold up to 6x Large apple watch bands Will hold an apple watch band ~ 145 mm long and up to 9mm thick (Will fit the Small/Large Silicone band, the Sports Loop, and the small version of Leather Loop band - check dimensions for…

Downloads
2,987
Likes
484
Rating
4.95

Key Trap - Interlocking puzzle by Christoph Lohe

Key Trap Interlocking puzzle by Christoph Lohe Assemble the various pieces into the lock shape shown in the cover photo. The key is looped around the shackle so that they are permanently bound together, but can move freely against each…

Downloads
2,841
Likes
1,215
Rating
4.91