Liczymy pasujące modele…
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Heads-up: There is now a beefier version 2, in case you have grandkids who tend to break stuff while playing with it. :-) https://www.printables.com/model/1499800-scratch-attach-printed-telescopic-back-scratcher-v This short (90 sec.)…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
This is a 6" corner brace (for clamping), aka right-angle clamp, aka positioning square. As requested, there are now four variations: A: Sharp corner — measurements on sides (inches & millimeters) right down to zero B: Corner nipped — for…
Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…
NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
I remixed this set so they print such that the silhouette action is moved to the fronts of the bookends, which also gets the “smooth” face that printed against the bed… to face forward. I also revised the files so that 2-color printing…
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Please note: this is designed to be a press-fit INSIDE a blast gate (or dust hood) with a 4-inch OD, as shown below: … which is exactly how the POWERTEC 70291 (after which this was styled) fits inside a blast gate (or dust hood) with a…
This is made to accommodate a “press fit” for the tapered adapter that came with my VacMaster Shop Vac 2.5" hose. The stock tapered adapter's OD (outside diameter) starts at about 58.5 mm at the base of the connector and tapers to about…
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
You may also be interested in my Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides NOTE: There is now a new counterpart to this one that enables capturing dust that escapes out the bottom. Get…
Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
Flashforge AD5M Door Handle - remixed to print without supports needed Only change is to angle the existing overhang so the part can be printed without need of supports This is regarding the DIY enclosure upgrade . HEADSUP 1: I just…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
Great way to use up the last few meters of a spool. Looks best with neutral colored filaments such as black, white, gray, tan, etc. One of these clips takes only 1g, 0.49m, to print! A set of 9 clips takes only 13g, 4.19m, to print! These…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
Update: New as of January 17, 2024: uploaded the new “Universal Slope-ie Ramp-ie Thing” (to glue onto the bottom of the shoe body). Full details below, or read about it on V1E forum . This short video explains all about the new “Bubble…
Painting Pyramid, Stackable v1.0 Prints w no supports. Great way to use up last bit of a roll. About 1.25" tall. Scales up well, if you need it larger. My PayPal tip jar: https://paypal.me/design8studio Various LowRider 3 CNC remixes:…
Watch this short video showing it in use: https://youtu.be/FPNZFjZE0pI NOTE: This is v2, which prints with no supports needed. The v1 is still available , which requires supports to print it. This model (with 4 sauce sleeves on each side)…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
Heads up! This is the new, improved "v2" enclosure... If you were looking for the very popular, original "v1" enclosure, it's still available over here:…
NOTE: New as of September 7, 2024 - I added a remix of this case that supports Bart Dring's FluidDial Starter Kit. Buy Bart's FluidDial Starter Kit: https://www.tindie.com/products/33366583/fluiddial-connection-starter-kit/ Access the new…
This allows use of my earlier kinematic accessory tool mount on the awesome new LowRider v4 CNC . Here's an old-yet-helpful video I made about the earlier version (which was for LowRider v3): This whole deal is an adaptation of a Maxwell…
This v3 of the AD5M door hinge for DIY enclosure is expressly for the Minimal enclosure and its remixes. It repositions the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as keeping…
v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…
This remix is so that a 2.5" vacuum hose fits and can be attached to the LowRider 3 (instead of ~48mm as in the original parts). I worked hard to match the style and function of Ryan's excellent original work, with only the needed change…
These remixes are based on these three things: Logitech C270 tripod, by luc_e, December 27, 2015 C270 Focus Ring - OpenSCAD included, by biomushroom, August 24, 2016 snapmaker base plate, by Okatake, February 12, 2018 (Note: I tried to…
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
This remix was requested by Stefan Raatz , who desired a case for holding an SKR 1.4 Turbo (instead of SKR 1.2 Pro), as well as a Raspberry Pi 4 model B. Quick heads up: These remix designs were somewhat “intended” for the case being…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
NOTE: LINKED PRODUCT CHANGED HOLE SPREAD Kudos to V1E forum member Pebble who gave me the heads up that the makers of the drag chain seem to have modified their design. My mount hole spread distance was 9.2mm, but the chain product…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
This remix was requested by Miguel Arellano , who desired a 75 mm extension of an existing control box's lid and base, in order to house a Raspberry Pi 4 model B, so he can run Octoprint. Quick heads up: These remix designs were somewhat…
NOTE: There is now a new, updated version of this: LowRider v3 CNC - Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc This is a remix of several prior iterations — originally designed for LowRider 2, now…
Great way to use up the last few meters of a spool. Looks best with neutral colored filaments such as black, white, gray, tan, etc. One of these clips takes only 1g, 0.39m, to print! A set of 12 clips takes only 13g, 4.43m, to print!…
I remixed BODY3D's Kirby model into a lamp, using Fusion 360 as the modeling app. Q: What lamp bulb, cord, and switch are used for this? A: It uses this nice, cool-burning LED lamp bulb and accessory cord with switch (affiliate link):…
Huge thanks to Ryan of V1 Engineering, the Generous Genius, for sharing his wonderful machine designs with the world. This is a remix set related to the amazing LowRider v4 DIY CNC . For orientation on what is meant by “front” of the…
Safety Cover for Side-Cutter Tips. PLA. If you've lost your little cap, this will just work. Also seen in the pics / video: Flashforge Adventurer 5M (AD5M) Side Cutter Mount v1.0 Change log: June 14, 2025 - v1.1 - only change was the…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
I use these 2.1x5.5mm DC Power Jack Plug Connectors in a variety of things so modeled this to help with plans & designs. Here is an affiliate link to the batch of connectors I use: https://amzn.to/395r5zi I'm attaching it in STL format…
NOTE: Newest v2.0 of this model is now available - click here. NOTE: This is v1.1. If you were looking for v1.0 - click here. Note: As of Nov 16, 2023 — in addition to the earlier remix changes, today I added SVG files for engraving the…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. Kudos & thanks to Vance Howard for the suggestion. OPTION 3 of 3 — TETHER to TUBE edition — Prints in TPU. Easier to…
Update: New as of January 17, 2024: uploaded the new “Universal Slope-ie Ramp-ie Thing” (to glue onto the bottom of the shoe body). Full details below, or read about it on V1E forum . The new part was originally only available on the…
Resized (reduced) to fit on my 220x220 mm print bed. I remixed the case and added a “liner,” so the case can be printed with a darker color of filament while the liner can be printed in a reflective white filament. I also remixed the case…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Wall Hanging Attachment for Picture Frame - no supports needed - quick, simple print. Includes a “centering nub.” Measure and mark the center of your frame, and then align the little nub with that mark, to get the perfect placement of the…
As shown and discussed in this video: As described in the video, attached are both printable files and editable SketchUp files. This content was previously exclusively for supporters on Patreon, but I did not care for the Patreon business…
Heads up: There is an all new KINEMATIC version of this now, available here: https://www.printables.com/model/484825-lowrider-v3-cnc-kinematic-tool-less-quick-change-a NOTE: This version (3.1) was published May 4, 2023. If you downloaded…
Note: Several of my designs (and remixes) for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…
NOTE: This is v2.0. If you were looking for v1.0 or 1.1, click below: v1.0 v1.1 New in this version: The main new option here is the keystone jack slot in the base. This can be used with, for example, an ethernet jack for quick connect /…
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
Watch this short video showing it in use: https://youtu.be/-qeBG1Yfmmk NOTE: This is v1. A new v2 is now available, which prints with no supports needed . For this version (v1), be sure to turn on supports in your slicer! This model (with…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . NOTE: July 28, 2023 — Consider adding some kind of spacers (could be washers or printed…
1" EMT is the steel tube of choice for US-based builds of the amazing V1 Engineering LowRider v4 DIY CNC . For LR4 makers outside the US, supported tubing sizes include 30mm and 32mm outside diameter. For using this print with those…
UPDATE: Newly posted as of Oct 12, 2024: FluidDial CRADLE v2.0 - for LowRider v4 (attaches to YZ plate on X-min side) - https://www.printables.com/model/1037601-fluiddial-cradle-v20-for-lowrider-v4-attaches-to-y …now back to your…
I designed this based on the Bessie brand Quick Release Bar Clamp. It may also be compatible with Pittsburgh & Irwin brand bar clamps as well. Ideally print in TPU for flexibility. I printed in PLA, and used a heat gun to warm the clamp…
Note: Several of my designs for my CNC plasma rig are available here for free. For when using 1/2" EMT or 3/4" EMT (electrical conduit from home improvement stores) in projects such as the LowRider v3 CNC, these end caps protect against…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…
3D-printed Throwing Star patterned after a stainless steel one... (steel one shown in one of the photos). Unassociated tags: prop, toy, karate shuriken, karate star, karate tool, karate weapon, kid shuriken, ninja star, throwing star My…
This v2 design is improved over my original version . There have been two suggestions to improve against any risk of layer separation. (1) Move weight-bearing bits to have them under compression from the screws. This is now v2.0 . (2)…
This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…
Thanks Many thanks to @myuto_675467 for not only making this design, but allowing this Labs category version of it that allows remixing. Original open-source CAD files are over there: Why this listing? The problem with the printed springs…
Changes I made it able to support a 10mm thick drive (instead of 7mm). I also added fillets and chamfers just to kind of polish it a bit. On my way toward doing a make of this nice design by Scott Gibb, I also created this remix. I used…
LowRider 3 - hose-hanger modified for 2.5" vac hose. This part was designed to accompany another LR3 remix of mine: the LowRider 3 CNC - Makita 700 Series Mount & removable dust shoe - REMIXED FOR 2.5" HOSE If you plan on using my 2.5"…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
This video not only shows how these laser crosshairs are installed and work on my DIY plasma rig, but also details how I designed these holders from scratch — from start to finish using SketchUp (free 2017 version, the last free version…
Heads-up: There's a new version of this: v2.3 — The only change in that remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. — Get it here:…
New Version 1.1 Note: In September, 2023, a fellow V1E maker ( @steved on the V1E forum ) needed a little bit of adjustability on the location of the right-side belt-tensioner+endstop mounts, and so I made a v1.1 remix of this design ,…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
This is made to go with the LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1) . Here's a helpful video I made about this: OTHER COMPATIBLE TOOL HOLDERS INCLUDE: NEW…
Please watch this quick video which explains the purpose, and shows installation, etc. Print info: Print as oriented. Prints without supports I used my standard default of 0.3 layer height on a 0.6 mm nozzle. However, a 0.2 or 0.1 layer…
UPDATE Nov 8, 2022: I added a new v2 of the rod holder, based on a clever suggestion by (thingiverse user) @Klober81, which reduces the needed length of metal rods from 12.5" to 12", which saves on purchase cost of metal rods when one…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
![[unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1178649/images/8868018_3e4f06c2-c883-4012-9e58-fbac3acf33a3_d3c9d2f1-d15d-488f-bb0a-152d6677cd7c/img_0275-with-labels-retouched.jpeg)
![[Option 3 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with TETHER to TUBE feature](https://media.printables.com/media/prints/1137299/images/8582387_34919d77-614a-4166-a1b6-7a278797404e_ab9cab1c-6335-4b55-8dc6-2d7b80fe8b9b/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-3-of-3-printables-thumbnail.jpg)
