Liczymy pasujące modele…
This holds your small ~100 ml zip lock bags open. I used PETG, 3 walls, 15 gyroid infill, 0.25 mm layer height on a 0.4 mm HF nozzle. I don't suggest using PLA as the clips may creep and lose their springiness over time. Depending on the…
Description Parametric cable grommet for better sealing of wall holes that have cables going through them. Printing/Designing You will need the following parameters: outer_diameter : this is the diameter of the hole in the wall…
Print this in the orientation shown below (no supports needed at 0.25 mm layer height). You will then need 3 M3-nut inserts. I used M3x10 screws. Printed out of PLA, 5 walls, 15% gyroid infill. The 3 nut-inserts go like below Then
Description This is designed for the Model 3 Highland (2024). It's designed to fit Apple's 25W MagSafe charger (Model ID: MGDM4ZM/A). I have included Fusion 360 and STEP files for easier remixing. NOTE I highly recommend the 2-metre…
This removes part of the top, the part that catches the latching mechanism of the battery to hold it in place, which removes one overhang. I found you don't need it, the battery is heavy enough not to jump up 10 cm by itself. I also…
I made this model when I was trying to choose between the Sony RX100 VII and the Ricoh GR III. Reading dimensions online only tells part of the story, so I modelled a rough outer shape and printed it to see how the camera would actually…
Description This is a parametric lid for trash cans whose opening resembles a rectangle. I use it as a lid to my bio-degradable waste to prevent plastic from accidentally falling in there from nearby plastic recycling bin. Designing /…
I did not get lazy, I swear, the top-right mount is supposed to be 90 degrees rotated, as below. It locks the charger in place, so if you pull your battery out without locking the charger in place with your other hand, the charger won't…
Overview This custom mount is designed specifically for the reMarkable 2 tablet to attach to a honeycomb storage wall system. The design includes a dedicated opening on the left side to accommodate USB-C magnetic charging accessories, you…
Description This is a clip-on IKEA Skadis plate that attaches to the side of your Drona boxes, so you can make use of that empty wasted space. For a less-extreme solution to using the side space of your Drona boxes, I have also made a…
Description Parametric grommet to cover cable holes in wall. I have antenna cables coming from outside the house. Placing a hand near the hole with/without this is like night and day during winter, without the grommet your hand gets cold…
This utilises M3 screws and M3 nut inserts to secure to your honeycomb storage wall (HSW, because I'm lazy). I used M3x10 screws. You will need two M3 nut inserts per battery. I use a dab of B-7000 (phone adhesive) to secure the nuts to…
This is a box to hold stuff which clips on to your IKEA Kallax Drona boxes. I suggest printing the object on one of its sides as shown below; this way I didn't need supports on my MK4S, as the edges leading up to the overhang are angled…
Before You Proceed USE AT YOUR OWN RISK! I am not accountable for any damages that may occur to your camera when using this product. Description This is a minimal, leight-weight holder for cameras that have a dJI RS Mini Quick-Release…
This model comes with an opening on its side and bottom, so you can leave the USB-C cable attached to the cutter when putting it on the wall. You can use a cable holder then to keep the other USB-C end attached to HSW. Print the holder as…
Fillet Gauge, with large radii. Parametric STEP and Fusion 360 models available if you want bigger radii, or different values in general. I printe with 0.25mm Layer Height Speed setting on MK4S, came out fine. I used a marker to fill in…
Description This part attaches to your LED Work light to allow it to be attached to a camera tripod. Designed for Berg 10W Work light , a rebranded generic Made in China model. The following should also fit: Emos P4533 Megatron Helfa M…
This is a simple, three-part print is my first try at making a compliant 3D-print model. Print all three files in the orientation they are already in. I printed out of PLA, works well. It's a three-position switch, feels like a light…
Disclaimer As with any DIY project (electronics or otherwise), you are responsible for the pain and suffering your creations may cause you, as well as the inevitable existential crises they will have once you gift them the curse of…
I printed the Peak Design part out of ABS, 4 walls, 15% gyroid infill, 0.2 mm layer height. MK4S w/ HF 0.4mm nozzle. You need to use PrusaSlicer's paint-on support tool to support the actuating arm part, as below. I recommend using…
Overview Holder for Olympus E-P7 camera with 14-42mm kit lens. Attaches to Honeycomb Storage Wall (HSW) with 4 M3-nut inserts. Cameras lides in from top, right-hand grip facing up. Compatibility Requires HSW M3 nut inserts (included in…
I have a disdain for the hexagonal inserts used in most HSW attachments, so this one attaches with M3 screws to M3-nut inserts in the HSW. The only part that differs from the original model is the part that attaches to the wall. I printed…
I made this model when I was trying to choose between the Ricoh GR III and the Sony RX100 VII. Rather than relying only on listed dimensions, I wanted something physical that I could put in a pocket and immediately compare. So I modelled…
Overview This is a dedicated holder for the SmallRig 4087 Dual Battery Charger, designed to house two Sony NP-FZ100 (or NP-F970) batteries. The design features hexagonal cutouts on the sides to save material and maintain a "cohesive"…
Overview Protective cover for this generic Makita battery 140W USB-C/USB-A adapter I found on AliExpress (probably fits other power-tool adapters of the same type) Prevents connector breakage when stored in e.g. backpack. Print Settings…
Overview Remix of the Honeycomb Storage Wall for Dyson tool heads. Three sizes provided to accommodate different clearance requirements from the wall. You will need to print M3 nut inserts, have nuts for it. Compatibility Dyson Models:…
To wszystkie aktualnie dostępne wyniki.
