Liczymy pasujące modele…
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the final version of a bed scraper that evolved from a much simpler model I designed years ago. I created it by combining features from several other models I found online, but none of them included everything I needed. It has…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
Wydruk około 2,52 €–3,07 € nettoWstępna wycena jednego wariantu
This simple laptop stand rises the rear side of your laptop by 22mm to improve cooling and give a slight angle to the keyboard. Unlike other models, this one is all of the following: Simple and not over-engineered Stable Light, but sturdy…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Universal 2.5" SSD/HDD to 3.5" NAS bay adapter. Required when the SATA connector in the bay is fixed, so the disk has to sit in the exact place. This frame is rigid and simple, and is designed for fast print and maximal performance with…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the old version - see my latest, upgraded Version 2 . Hangable filament waste bin inspired by some IKEA wall organizer boxes that I saw once, but couldn't find one later. The bin can be easily removed when you need to empty it,…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Unlike other similar coin wallets, with this one you will always see how many coins you have. It requires 8 compressions springs - details below. PRINTING INSTRUCTIONS Print all the parts except the star.stl preferably on a textured bed…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Adjustable VESA riser for monitors that allows you to rise or lower your monitor up to 75mm. Convenient for wall-mounted monitor stands that do not have height adjustment. Depending on your monitor model and the way how the cables are…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description A simple, yet stylish dispenser for doggy poo bags. Printing Options The enclosed 3MF PrusaSlicer model files include: A version for single-color model with no embossed image (smooth top and bottom) A version with a bone image…
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
A magnet-held basket for desiccant silica gel bags. Prevents the filament from absorbing humidity during long prints. Makes sense only in combination with a filament side door , like this one . The silica gel bags should be regularly…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ASA, NYLON, PET 0.20mm layer height 30% infill no supports
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
A compact, modular Bracket for DIY 18650 battery packs. Brackets easily click together, but hold firmly. If your battery is slightly thicker than usual, a bracket might crack while pushing the battery in. In that case just scale the model…
See also my other remix with a magnet ! This was probably one of the very first models I ever printed, and the design was (and still is, in my opinion) just perfect! The issue with the original Sneakypoo's model was that the tolerances…
Comes in four sizes: 44.5mm slit 55.5mm slit 65.5mm slit 75.5mm slit Printed in PLA with 40% gyroid infill. Hook the bottom of the tube in a Z-shape through the slit to ensure the grip.
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
A revised version of the whistle that I designed to be compact, fast-and-easy to print, and super loud . Good for sports and hiking, survival etc. Compact and handy, just 20 x 53 x 10 mm in size. The two chambers of slightly different…
All the other comb models I found here had equally spaced teeth. This is a classic dual-density comb, with wider and thicker teeth on one side for thicker or wet hair, and finer, more narrowly spaced teeth on the other side for dry hair,…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
About I have envisioned this chess set for quite a while, inspired by fire and steel. Since I was limited to plastic as a medium, I experimented with the board’s texture and surface patterns to achieve a metallic shine. For the black and…
First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…
This full-size acoustic violin is an improved version of the model by Woody that I remixed/modded according to the real violin specs from MakingTheViolin.com (original small-size model here ). Some parts are adjusted or remixed, while…
This slick display stand for Han Solo Blaster DL-44 is designed to be as least visible as possible, in order to emphasize the displayed object, rather then itself. Tailored specially for https://www.thingiverse.com/thing:1915956 , but…
Dummy 5.56mm x 45mm NATO Bullet Chain Link, that snugly fits 5.56 dummy rounds for M249 and other 5.56 chain-fed airsoft replicas. It's a model based on the M27 disintegrating link designed for ammunition belt-fed firearms. I printed mine…
Designed to be printed fast, with low consumption of material. Tests angles from 25° to 85°. Why this shape? At first I made a plain 2 mm thick arc-shaped stripe, with the numbers embossed on the top. However, that model was bending…
LATEST MODEL Since 2025-07-13 I recommend using this model instead: Ultimate Magnetic Bed Scraper With Replaceable Blades This is a spatula for removing objects from the print bed, with easily replaceable printable blades. When one side…
Not everyone has the same set of tools - and toolsets can change over time. That's why I redesigned the original model as a modular system that lets you keep what you need and replace only the segments that have changed. Printing the…
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…
Vacuum cleaner sucker for drill holes, various tube diameters for various brands and models. The round opening for the drill allows enough visibility to work, while the vacuum prevents the dust from escaping, and holds the sucker slightly…
A simple, compact 16x AA battery box with a tightly fitted lid. The provided "AA Battery Box MMM.3mf" file is a project for single extruder Prusa that uses two manual filament changes to print letters on the lid in a different color.…
Airbrush Stand for Badger Velocity airbrush, with a cap holder. Could also fit some other airbrush models - it's up to you to check, and you are welcome to let us know which ones, in the comments below. Confirmed Airbrushes These are…
Made in accordance with the blueprint specs. 7mm tall drives are usually SSD, while 9, 12 and 15mm are HDDs.
The first model is 101.7mm x 147mm x 17.8mm which is in accordance with the 3.5" drive size specs (see pic 2). The “max” model is the 26.1 mm tall model, that is the maximum according to the specs.
V3 Gearbox Dust Cover for G36, AK, RPK and other airsoft replicas with V3 gearbox. The cover goes behind the trigger. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: PETG, ASA…
A standard spoon that came with stevia extract was too big, so I made this one that has a standard 110 mm³ scoop on one end (equivalent to 1 tablespoon of sugar), and a 55 mm³ scoop on the other (equivalent to 1/2 tsp). UPDATE 2017-09-28…
My original BB speed loader (or fast loader) rod / trumb armature broke, so I designed a new one to be slightly stronger. Print the "split" version it in ABS or PET-G, glue the two sides together with super glue, finish it with a file or…
Please drop a ❤ if you like this project! Why This One? Because it's tailored for those ridiculously cheap credit card USBs, which qualifies them for popular giveaway goodies - so very likely you already have one lying around! They are…
This version of the LM8UU bearing clamps for the Y-axis (print bed) is modified to fit Prusa MK3. The differences from the source model ( https://www.thingiverse.com/thing:1848700 ) are: This model is cut down in order to pass over the…
This is a lower-profile guitar pick dispenser that can hold several picks. Print the 3 parts; Take a cleaning sponge and cut it in a triangle shape (it will act as a spring that pushes the picks out); Put the triangle-cut sponge in the…
When mounted and screwed onto a gearbox, a pistol grip should never be touching the receiver body. When that happens, the screws in the grip pull down the gearbox messing up the proper positioning of a gearbox within a receiver and the…
My clone of Specna Arms M4 Charging Handle Extension - cause these suckers just love to break! This one is pretty much the same as the original. Printed in ABS and tested, so far so good. I printed it as oriented, which gives you a rough…
A modular, flexible airsoft 6mm barrel cleaning rod that can be disassembled for easier storage. When disassembled each section is exactly 20 cm long. Use soft cotton cloths cut to approx 1 x 2 cm (depending on the cloth thickness the…
Picatinny 25mm lamp holder for Ø25 mm flashlight. Requires one black 30mm long M4 screw with hex key or phillips head, and one M4 bolt. There is also the corresponding 3" M-Lok Picatinny rail (print with supports). Requires two black 12mm…
When you have a Prusa CORE One , or some other printer with a metal shell, everything gets better with a magnet! So I made a remix of a remix of the original Sneakypoo's model of the filament filter, housing one 5x2mm neodymium magnet ,…
Core One Corner Plugs with magnets, that cover the gaps more thoroughly. You will need four pieces for the top four corners, or three if you have a camera mounted in one of the corners. Each corner piece requires 3 magnets, even though…
A replica of the Three-Prong Muzzle Brake designated for use with Surefire SOCOM556 suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use…
A pretty detailed dummy template model of Raspberry Pi 3 B+ that you can use for designing enclosures etc. Tolerances are +-0.15 mm. The blocks on the back represent RAM and protruding component pins. Sources:…
Used for troubleshooting possible heatbreak fan (not the hotend fan!) issues. Printed using AzureFilm ASA, satin sheet, enclusure. Adding inner brim may help, but the point is to verify the ability of the printer to produce the part using…
Violin wall hanger / mount for acoustic violins of all sizes, and it should work with violas too. It has a rotating fork that automatically adjusts its angle to grip the violin by the neck. Mount the base to the wall using a single screw…
My collection of standard 0.8mm thick guitar picks. I have quite a few of them printed in ABS and PET, and they all work just great. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Filament: Any…
Simple, discrete, and fast-to-print hexagonal stands for various Star Wars figurines. The pegs are detachable from the base, and come in several sizes to fit Hasbro, Kenner and Disney brands. Also, if a peg breaks, it is much easier and…
A simple, compact 16x AAA battery box with a tightly fitted lid. The provided "AAA Battery Box MMM.3mf" file is a project for single extruder Prusa that uses two manual filament changes to print letters on the lid in a different color.…
Glock GBB magazine follower. The regular one is for standard magazines, the "long" is for extended magazine. Split during the longest axis and glue together using super-glue. Use two bits of filament to align the two parts. Use nylon for…
A fairly accurate model of R2-D2 holo projector with a separate lens and the eye socket. This is a full model for building into a dome, but if you need one just for surface mounting (dummy projector), you can use the included…
At the time being, Prusa MK4 does not show results of bed leveling, so out of the box, you can not check if there is some fine tuning required. The automatic bed leveling adjusts to the imperfections on the heatbed, but they reflect to…
THERE IS A NEWER, EASIER TO PRINT MODEL AVAILABLE HERE: https://www.printables.com/model/1638456-m4-stanag-magazine-protection-sock Recommended material: TPU/FLEX 82A
This is a remix of https://www.thingiverse.com/thing:2943086 modified to match the RJ45 connector specifications. There are several versions of the same model, regarding the wire diameter: 5.00 mm (4 dots) 5.25 mm (3 dots) 5.50 mm (2…
In combination with Retro Arms CNC Split Gearbox, the standard V2 selector plate was not reaching full-auto switch on the Leviathan V2 ETU (non-optical version), so I made this one with a wider tab that activates the two firing-mode…
This model is NOT the phone holder itself (you can buy one on Ali or similar) - it is just the cover for the stupid holes on its front plate! Remove the velcro in the middle and glue the printed part with a piece of double-sided adhesive…
Replacement Spring Guide Plug for Hi Capa 4.3 and 5.1 GBB replicas. It should be printed in nylon to ensure durability. Versions with "-supports" already contain supports in the model, that are easily removed after being printed.…
Original door handles can break their front lip while inserting the plexiglass, so I made this strenghtened remix. There is also a remix for 5 mm x 2 mm round neodymium magnets. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
This tube and rod drilling guide! Useful, and easy to use, with replaceable inserts for different drill sizes. Supports drilling holes Ø4-12 mm in tubes or rods Ø18-50 mm. For drilling holes in tubes larger than Ø50 you will need longer…
A replacement Alfa Romeo GT logo that I made for a friend of mine who lost his. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: Vehicles
Not only for MINI and not only for 2kg spools - it works with the small 500g spool and any with a diameter larger than 15cm! Required Materials You will need the following materials: Printed Base parts (4x) Printed Rail parts (2x) Printed…
The second, improved version of my original hangable filament waste bin, inspired by some IKEA wall organizer boxes that I saw once. Improvements Sturdier back that does not warp Tighter fit for the lid Additional, deeper version: 100mm…
If "bad" is far below your criteria, and "excellent" is above your reach - this is the guy who is rooting for you! Always stuck in the middle, with nothing extra to offer, nor nothing lame to raise the eyebrows - Mediocrates is a…
Protects your filament from dust and humidity, especially during long prints. Also consider using it with this magnetic silica gel basket . This door does not require any modifications or extra parts for the printer body. It uses a 10mm…
This Angle Finder (Angle Meter, or Protractor if you prefer) helps you finding the exact angle to rotate the bed screws on your Nylock Mod , when leveling the print bed using Prusa Leveling Guide . Besides the original version with 10°…
A fully refactored version of the original box, requiring less material to print, with included spare screw holders. The soldering iron clamp is removable, so when and if it breaks, you don't have to print the whole case. Change Log…
Print-in-place two part hinged foldable wall (or door) mounted clothes hanger similar to the Ikea's Komplement Hanger, but with a hinge. Handy to use, discrete when not in use! Be careful not to overload it, but depending on your print…
G&G uses V2 gearboxes for theirs SR25 replicas, so if you want to use a regular M4-type hopup chamber, you need to use this adapter between the gearbox and the hopup chamber. No printing supports required.
A fairly exact copy of the hop-up arm used in the original Specna Arms Edge SA-E17, but most likely the same one is used in any Specna replica with a rotary hopup chamber. There are two versions: the copy of the original part, and a…
Curtain Clips / Hooks. Use ABS for elasticity. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 0.20 Infill: 20% Notes: ABS for elasticity Support Pattern Spacing: 2 mm Support Contact Z-Distance:…
Connectors for IKEA Ledberg LED lamp, with flexible (using regular PET filament) connectors. I made these because all the other connector models had their male connector contacts too rigid, so one pole would often press the board away…
Digital thermometer stand for the popular Chinese thermometer, with the adjustable angle. There are two versions of the base: With two pegs for wrapping the sensor wire. Plain base with no pegs. Print Settings Printer Brand: Prusa…
An accurate replacement Maxx Model R-Hop Tensioner 4.5mm for Maxx HopUp Unit, with optional rubber nub. If you want to use the “sorbothane” version, use the enclosed Sorbothane Cutting Template and a Gillette double-edge razor blade to…
A dummy keyboard model with clickable keys and a super-fake microphone hole, for all of you ChatGPT experts out there! Multi-colored model printable both on an MMU3, as well as on a plain Prusa with no MMU (using just 3 manual filament…
ZX Spectrum inspired key caps for the cheap TeckNet X 315 ultra slim wireless Mini keyboard. The project uses manual multi-colored print, so you can print it on a standard Prusa without an MMU3 unit. It requires: TeckNet X 315 ultra slim…
An exact copy of the hop-up arm used in the Prowin CNC hop up chamber. There is a copy of the original part, and a sewed-off version for R-hop and similar. The original part has a slanted tooth that goes into the hopup wheel, what makes…
Remix of the Universal Cable Holder by VC Design for mounting to a glass table, when the vertical surface thickness is smaller than the holder. All the modifications are made in a 3MF PrusaProject file using part scaling in Z-axis and…
A handy sandpaper handle (pun intended), especially dimensioned for optimal use of 23 x 28 cm sandpaper sheets. Cut each 23x28cm sheet into four 23x7 stripes, and secure a stripe with butterfly nuts on each side. Base size: 20 x 7 cm.…
A cap for the Hyundai ix35 headlights with the corresponding silicone gasket. Print the cap in ASA, ABS, or another material capable of withstanding higher temperatures. The "Gasket [Silicone]" files are not for printing, they are just a…
This is a charging base that you will need if you want to connect your UV-82 radio battery to a smart battery charger, in order to have a better control over charging or to measure battery capacity. It does not support balancing, since…
I made this remix with the settings for Prusa MK4S, to have a reference print when comparing against CORE One.
IMPORTANT DISCLAIMER: 3D-printed propellers can be dangerous, as they can shatter, sending debris that can seriously injure nearby standers. Use this at your own risk! A set of spare blades for a TIE Fighter Quadcopter Drone, like the one…
The mod contains parts for https://www.thingiverse.com/thing:1915956 : A remix of the crossbar thumbnuts that now use M4 hex-head screws in order to achieve better grip and allow assembly/disassembly. Improved version of the scope windage…
Adapter for Electrolux Turbo Brush (round 32 mm) to EUOC9GREEN (rectangle 40 x 36 mm) vacuum hose adapter.
Createbot Filament Spool Clip for 1.75 mm filament. Sometimes branded just as www.china3dprinter.cn. Use ABS for elasticity. Print Settings Supports: No Resolution: 0.30 Notes: ABS Category: 3D Printer Accessories
Scope extender for smaller scopes with 30mm objective lens tube outer diameter. The outer diameter of the extender is 50mm, and its length is 90mm. Aside from giving the scope a more menacing look, it prevents lens from reflecting sun…
Battery replacement tool for Nautica Watches, used for removing back plate. Replacement o-ring rubber seal here: https://www.thingiverse.com/thing:3377578 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
This model is inspired by https://www.thingiverse.com/thing:456900 . It is made to be 7.4 mm narrower than the original, saving precious space in your models. That is achieved by thinning the walls between the batteries down to 1 mm…
If you are making an R-Hop for your Cyma CM.030 (Glock 18C) and you would like to keep your original hop up arm intact, or if for whatever reason you would need a replacement part, this is the model you are looking for. Use first a 1.3…
Beware of The Dog (and The Cat is Not Trustworthy Either) Sign - Dimensions 240 x 200 x 2.4 mm
An improved version of the HK pistol grip lock, with a thicker mid-bar, better fit, and a removal/installation tool.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
A replacement screw cap for a modeler's paint-mixing 20 ml bottle. Outer diameter is 35 mm. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.15 Notes: PLA There will be some stringing at the…
Low profile tires that fit 50mm x 10mm office chair wheels. The tire itself is made smaller than 50mm in diameter, so you will have to slightly force fit it around the wheel. Double check that the rim is properly seated. Required 2 tires…
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]](https://media.printables.com/media/prints/104767/images/1049067_18c18458-fa9e-4654-902c-b1e97a049d27/4c891d12cf05afc76616116d7b423361_display_large_10.jpg)
