275 modeli
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
I was looking for a Super-Sized fidget star. Since I could not find one, I created this one. The photo shows the new larger size verses the original size. Please comment on your make
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
A simple test print that should cover the bed with small squares. Each square is only 1 layer (at .2 mm) thick. I use this model to adjust my z-offset to just the right value - it's really nice to see uniform, clean, smooth squares. Print…
A case that I built specifically for the OGX-Mini / Joypad OS projects, but it actually works for any usage you may have for the Waveshare RP2350-USB-A board. The model is built with very tight tolerances, so depending on your printer you…
This model is compatible with the lego system.
Designed for use with PLA filament, 4.5 hour print
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
I haven't found fitting leg for my keyboard on Thingiverse. One that was available was too big, so I decided to take 30 min tutorial on Fusion 360 on YouTube and made it myself (props to Product Design Online). Model in my opinion is…
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
This model is a remix of @PatvdLeer's model, which fits the RP2350 USB.
I loved the original design, but wanted to screw it to my wall and add a couple more slots for more beds. I've used countersink #8 screws with drywall anchors to mount it to my wall
Realistic looking pei sheet with texture to use in your slicer software.
Lost my Spaghetti Die shape for my Philips HD2357 Pasta maker. So needed to remake it.
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
These are two containers to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in. They are specialy made because my printbed (235x235) was to small for the other containers i found, so i just jumped…
Garmin Quarter turn adapter for the Garmin Forerunner 235 so it can be used with Garmin bike mounts. Simply remove the strap and fit this on place. Its divided in 2 for simple printing but can easily but combined and printed uniquely with…
Designed for use with PLA filament, 4.5 hour print
I made this minimalist wall stand to hold 3 build plates size 235x235 mm, with or without nozzle cleaning silicone. The bottom part is made in two versions. One is with screw holes if you want to add screws to your holder to secure it…
This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…
This is a product of Wireheadarts 's OpenSCAD script. I set numx=9 and numy=11.
…Please be sure to hit like & post a make, I'd love to see your prints! Voron Style Wall Mounted x4 Build Plate Holder Multi Size 220, 235, 250, 300, 350 Mount your build plates on your wall, holds x4 of almost any size! Print upside-down…
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Protective cover for the Fujifilm battery NP-W235, the battery for the X-T4
Mod/extension for the Rook 180 by Rolohaun , based on the idea of Kanrog , who had the brilliant idea to extend the size of the Rook180 ( Rook-235 & 225 Mod ), now you can also extend the Rook 180 TURNED (mod by WoodKnight). The Rook 180…
This is a replacement for the rear Parcel Shelf Bearing Clip of an Opel Corsa-B and Tigra-A. As you can see in the photos the original part (on the left side) snapped off. So I redesigned that part to make it a bit stronger and also spare…
Make a DIY YubiKey for only $4. With this configuration, you can use the Picokey with both your PC and your phone. https://www.picokeys.com/pico-fido/ https://pt.aliexpress.com/item/1005008622261552.html…
I decided to use the full 235x235mm bed space on my Ender 3 S1 with Klipper so the 220x220mm bed model no longer suitable for me. I re-measured the endstops coords and movable area. Danger: be aware of these two limiter bolts and cable…
This adapter gives you more room to mount a TP Link EAP615 to a wall outlet. It is designed for M3 brass inserts. You need 2x m3 inserts and M3 screws, to mount the bracket from the Accesspoint. The Screws to screw it on the wall outlet…
A simple PEI sheet holder for 235 mm width plates (eg. Ender 3). STEP file attached, so you can easily customize it for your own preferences. Changelog: 2022.11.01. Uploaded v2 version, thicker, more stable and a little bit nicer design.
It fits tight to the camera body, no screws or glue needed.
A compact protective case specifically designed for using the Waveshare RP2350-One as a PicoKeys FIDO2/2FA security key . This case transforms your development board into a durable, everyday-carry USB security device. Key Features:…
NB This is a WIP Background: Modern 3D printers are printing FAST nowdays. But you don't have to spend a fortune on a Bamboo Labs top of the line printer. Believe it or not, if you have a printer with a 235x235 bed (like an Ender 3) you…
I wanted to see if i could extend the Rook to fit an Ender3 bed. The Z rods can be kept stock, or use longer ones for a higher Z. With 450mm rods on Z, the z volume is 280mm X and Y uses 8x360mm rods. Note: If you have the Rook 180 TURNED…
I was inspired by other “honeycomb monitor stand” designs available on Printables and modelled my own in Fusion 360. But these other designs don't work for me since I can't source locally (Australia) the correct size timber board. This…
Screen Mount to allow the use of a BTT HDMI 5 screen on the VZBot 235. The screen attaches in the same location. Bonus door plate included that fixes the incorrect pattern sequence for those of us with OCD. Hardware is standard M3 bolts…
I've lost one of my mounting plates during moving houses. Unfortunately TP-Link doesn't sell these as a seperate products nor were the able/willing to send a spere one. (I've read that TP-Link US does ship spare parts, TP-Link Spain…
Hi I have created filament spool holder for vz235 - filament dryier for free. You can easily print 4 sets of this holder and mount 2 spool of filament inside. BOM/1 set: 3D printed parts - ABS (1 part is mirrored - so you need 1 normal 1…
I was given an Icom IC-2350H VHF/UHF 50watt radio and I want to make a manpack out of it. However I'm too cheap to purchase an aluminum cage and I own a nice 3D printer. My Fusion360 skills are limited but I'm getting better. This is my…
I have made a storage for the printing plates with a size of 235x235mm. The mounting is done with 4x20 screws. I have to fix the plates pushed in and the printed parts with double-sided tape fixed, then I screwed it tight.
This is a simple 2x2 Gridfinity holder/stand for the EEVblog Brymen BM235 multimeter. It allows you to store the device vertically at a slight angle so you can easily view the display when using it. I might end up tweaking the model a bit…
Alternative to wire gutters, these allow you to route wires along DIN rails and between components. This was specifically designed to fit the VZBot 235 but should fit other printers using the DIN rail as a standard mounting method. No…
Ender 3 Pro prints 235 235 250 by going to Manage Printers, Machine Settings, and adjusting the X and Y values. Each corner circle is directly over a bed leveling screw. Category: 3D Printing Tests
Replacement for Forerunner 235 strap ring. Works better than original, as it's tighter with smaller bow curve. Print settings: filament: TPU 20D/40D Shore line width: 0.42 mm layer height: 0.2 mm print speed: < 20 mm/s Check out my other…
I have bunch of 4mm glass beds to use with my Ender 3. To organise their storage I've designed and printed storage holder. Thing is desinged to hold 4 pieces of 4mm 235x235mm glass beds (typical for ender 3, ender 3 pro, ender 5 and many…
Top Hat designed for the VZ235 that allows easy access to the extruder without removing the upper panel or opening the doors. Also prevents the CPAP and extruder harnesses from dragging on the top cover. This top hat requires several…
Крючок двери для микроволновой печи Samsung DE64-02355A
A battery case for the fujifilm NP-W235 Une boite pour les batterie fujifilm NP-W235
This is a battery carrier/organizer to mimic the one I used for the older style Fuji batteries. Since I couldn't find any existing models, I thought I'd give it a crack myself. I originally intended for a 3 battery carrier, but since…
printing works with nozzle size up to 0.6mm and layer height 0.32mm spacer can be fixed to wall with screws or double sided tape using the flat area flat wall model does not need supports for wall corner models the use of automatic…
This is a divider for Akro-Mils 30235 bins. I made a split version for smaller print beds. I used a 3d printing pen to join the two halves. The fusion 360 files are included. Category: Organization
This is a remix of the excellent PicoKey Case (RP2350/RP2040) DIY YubiKey/Passkey . All credit for the original concept and base design goes to the author — I only adapted the top shell and trimmed everything I personally didn't need. Tip…
I designed it to protect my Fujifilm NP-235 batteries, these aren't cheap so i prefer not to throw them with exposed connectors. I couldnt find any model with decent lock mecanism, so here it is. Fits the XT4, XT5, XH2 and XH2s batteries…
Logitech K235 replacement key. Print at highest resolution as you can. Category: Computer
Remix of https://cults3d.com/en/3d-model/tool/sheet-holder-ender-3-plate-235mm - grab the feet from there. Mixed the two variants from there into one to hold 1 Glass bed and 2 Spring steel bed surfaces, wanted it to be more compact than…
The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic…
I couldn't find a version of this anywhere else online, so I thought I'd make one! This is a 1x1 holder designed for gridfinity. The battery just fits in that size, but the walls are a little small on the sides. From my testing this…
This model is compatible with the lego system.
I am in the process of converting my Creality Ender 3 Pro into a Rook 180 by Rolohaun 3D (extended 235 mod by Kanrog). These are the modifications that I made to the models in order to reuse as many of the parts from the Ender 3 as…
A simple under desk mount for 235mmx235mm steel sheets. Can be used singularly or expanded to house as many sheets as needed. Fits a maximum height of 2mm per layer. The main bracket is mounted with four 3.5mm countersunk screws with the…
Open in OrcaSlicer, the assembled model has the negative cylinders and wings so it can be printed. This bracket allows you to mount a 120mm radiator without any drilling on the original vz235 rear panel.
This is a case for the Waveshare RP2350-One. Both parts snap together to protect top and botton part of the RP2350-One. I used a needle nose pliers to press both parts together as it is a tight fit. printer settings: - Layer height: 0.1 -…
This model is a remix of t3chguy 's " Sheet Holder Ender 3 - 235mm Plate Glass Spring Steel Mix " !UPDATE! I've added additional versions with longer support feet, 15mm and 20mm! If your table/desk is extra wobbly or you are prone to…
For every temperature calibration tower (based on layer height), there will be an accompanying ReadMe text file (Layer Heights 0.16, 0.20, 0.25, 0.30 & 0.40mm). These straight forward temperature calibration towers are designed to work…
3D Printed Heavy Duty Shelf Bracket Simple and Functional Shelf Bracket suitable to load up to 10 KG The bracket is designed for a shelf with the following dimensions: Wide: 235mm Thick: 20mm The material you will need: 6x M5x12 - Hex…
I've been wanting a USB-C female FIDO2 key, but apparently nobody makes them and the only ones that exist are products like Trezor, which somewhat defeats the purpose of having an inexpensive device. Managed to create a case that serves…
I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent. Get the USB-A…
Nice Storage solution for 235mm (Ender 3 standard size) beds. Added two holes to mount it to the wall.
VZ Bot 235 Nozzle Wiper the holder for the Wiper Pad is adjusted in leght to the Bambu Lab A1 Nozzle Wiper Pad Bambu Lab A1 Nozzle Wiper AGF-RC B13DLMV2 Servo to buy on Aliexpress…
VzBot 235 AWD CNC mounts for 2040 extrusion uprights. Files Included. The full motor mount assembly with the printed parts installed, showing how the final installation should look. Both f3d and STEP format. Printed Parts, STL's. Also now…
Accuracy of temperature change is guaranteed for 0.40mm Nozzle diameter. For every temperature calibration tower (based on layer height), there will be an accompanying ReadMe text file (Layer Heights 0.16, 0.20, 0.25 & 0.32mm). These…
Due to the lack of access to technical data, I have scanned the front lamp for Romet 2330-2350. The scan is not perfect, so I've decided aslo to create a housing model in Fusion 360. The housing has not been tested on the motorcycle yet,…
Remix of RP2350 USB Dongle Case to allow hanging it from a keychain
Bed sheet support in 235mm (Ender 3). inspired by the Bed sheet holders for the prusa MK3 and prusa Mini . Printed in 0.28mm with ArianePlast PLA.
A basic case for the Plasma 2350 (W) from Pimoroni. It assembles with the screw terminal wires already connected, so no need to thread cables through any holes. The USB-C and 4-pin JST-SH connectors remain accessible, and a small hole…
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ ABS temperature =…
Magazine file 235 x 70 x 317.5mm I printed this model in my Creality CR-10 Smart Pro review video, using ERYONE Galaxy Black PLA, 1.0mm nozzle, print at 0.6 layer height and 1mm line width. Total printing time: ~11 hours Printed with…
stampato con anycubic photon S con resina basic black
I designed these skirts in order to install my power supplies on the underside of the printer. The original feet were too low in order to fit them. All other skirt mods would need to be printed on a bigger printer. Therefore i designed…
VZBOT 235 - Removable Top Hat for original cover Since there is very little space for the bowden and cooling pipes at the top we were looking for a solution for a small overhang of the top cover. A few nice solutions already exist in…
Really useful battery holder to keep the batteries within reach, great for multiple scenarios! I made it in tpu to have the best fit, it also protects the connector on the lower side.
The EAP235-W WIFI access point made by TP-Link is a device, which is intended to be mounted onto a in-wall junction box. I need a surface mounted version, so I looked around for a solution. The boxes I found where all semi-beautiful for a…
Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich In March of 1942, a study was conducted to assess whether the turret of the PzKpfw IV could be fitted onto the superstructure of the Pz Kpfw III. After analysis, it was…
I love @Kayson_Print_2823596's Valentine's Day Teddy Bear, but wanted to jazz it up a little and add a Valentine's Day message to the heart for my wife, Julie. I started with Smart Fill, but found it wasn't quite getting the job done. As…
A remix to hold 6 235x235 build plates, such as for Creality K1, K1C, Ender-3, etc. Prints vertically - but how do you print on a bed plate something that is designed to hold such bed plates, ie. bigger? I'm lucky to have a larger printer…
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
01/01/2025 happy new year ! i update the stl file because i forgot the screen locks on the back side .. sorry :(
Intended for waveshare rp2350-one/rp2040-one boards used as security key (picofido). Only one button is available when extended, can not be pressed when collapsed. Protects exposed usb header while allowing proper insertion of pcb in…
Draw simple circles, holes, and arcs with this drawing tool: Capable of 5-235mm Radius with 5mm Intervals. Hey y'all. I made this one for the drawing template contest. Its a stupidly simple circle drawing tool that barely uses any…
I made this last year to replace the original gear that broke on the rail of my freezer drawer since I was unable to find the part online without purchasing the complete rail. My fridge is the KitchenAid /Whirlpool (W10772358) five door…
Backseat of my car just has like a tray and no cupholders. This drops in and fits pretty well.
Need something to hold your Ender 3/5 glass beds. (now with feet)
Fits the NP-W235 battery, it should slide in and out smooth without any trouble, however a whole is located on the bottom in case a push is needed. Prints without supports any infill % works.
I wanted to put this AP outdoor, even though it's not outdoor rated (do it at your own risk, of course), the place where it's mounted already has a roof, to it will not rain on it, but this mount will protect it even more. I've also…
Move the 5160 Drivers to be centered on the Super 8 board for a cleaner look and because my OCD was killing me. Additionally this board was designed to allow vertical or horizontal mounting of the Super 8 and its drivers to better suit…
General info: Model created based on Vz235 CAD and radiator measurements from Mellow's watercooling kit (aff link). This mount is attached to Vz235 using existing holes on the standard rear panel. Designed with ‘mouse ears’ on the sharper…
This is a sturdy support bracket designed to prevent the pool wall and connector from sagging under the heavy weight of a 38mm (1.5") water-filled hose. It perfectly fits the Intex pool connection elements, providing essential strain…
UPDATED: 04/12/2024 Added two new files to change the angle of the camera. They are labeled slim as they give better clearance for the HDMI cable. The stock mount doesn't fully show the front of the bed. I recommend using the slim…
