Liczymy pasujące modele…
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
simple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary. Print instructions You will need 4 for a stable stack. I print was done in PET-G, 0,2mm layer on a MK3s. Print works well without support. Update…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
I really love the Smartphone cases from Quad-Lock and used them allready for the past few years. The only Problem is the Price and the Varaities of the Quad-Lock mounts. So I just 3d-printed my own ;-) The here provided mount perfectly…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena jednego wariantu
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
I could not find the right adapter. That's why I designed this for my "be quiet" case. I tried to keep it as simple as possible. It should work for other 3.5 "bays of course. Print instructions Category: Computer Print Settings Printer…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
My obsession with IKEA Skadis made me want to add one to the side of the Kallax I have in my office. So I designed some holders to achieve just that. They are mounted to the two top screws of the Kallax and have slots for an M4 nut in…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update September 12 2022: Added CAD Step files. An adapter to fit onto a 42x48 tripod mount. Uses 8 10-24x0.5" screws and nuts. No supports required. Recommended infill of 20% for a rigid piece. May need some tape to shim the adapter…
Wydruk około 3,73 €–4,55 € nettoWstępna wycena jednego wariantu
The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my take on a hard drive adapter to allow mounting 3.5" drives to 5.25" bays. This includes front mounting points for a 120mm intake fan if desired (usable when installed in 3 adjacent bays).
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Out of AA batteries but have AAA's? Country in lockdown or you don't want to risk getting COVID-19 going to the store? Well, I've created a AAA to AA adapter. All you need is a 3d printer, a AAA battery and some tin foil/pop can. Print…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
This is a 3D printable 1/4" to 3/8" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 3/8" to 1/4” adapter here. Important Update: I’ve created a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting. This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
This is a 3D printable 3/8" to 1/4" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 1/4” to 3/8" adapter here. Important Update: I’ve created a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Remix of design found here: https://www.thingiverse.com/thing:1668774 I added some screw sockets, 3mm thickness and moved the place for PSU to the bottom, so the PSU lies flat on the case. Tested with SilverStone TX500 and TX700. PSU fan…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
Wydruk około 4,42 €–5,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this adapter to still use the original prusa spool holder with my enclosure.
Wydruk około 2,12 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
With this adapter you will be able using your default Prusa spool holder for 2kg spools (of 30cm diameter). Simple click system. No tools needed. Can be printed with PLA without support. Brim recommended. Please pay attention to the…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
This is a fun print that combines two things that don't belong together. You really can't say it's useless because you could totally use it as a spray nozzle on your garden hose with an HD water stream... This was a combination of two…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Wydruk około 7,15 €–8,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model to utilize spare mason jars around the house. The watering spike keeps the water coming out at a slow enough pace to where you can set, forget, and not have to worry about watering your indoor plants for a *period of…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena jednego wariantu
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
“Milspec” Bug A Salt 3.0 Stock Adapter In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter vom Perlator M24 Gewinde auf ¾ Zoll Anschluss. Mit diesem Adapter kann ein Gartenschlauch an einen normalen Wasserhahn angeschlossen werden. Druck aufrecht auf M24 stellen, keine Stützen erforderlich. Perlator Tool:…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
This adapter is made so it's possible to fit an larger coffee cup in the front drink holders of a Skoda Enyaq. Not recommended to use PLA due the possible heat in the cabin in the sun.
Wydruk około 4,57 €–5,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
Put that hexagonal hole in your Prusa Original Enclosure to good use! This easy-to-print adapter plugs into the hexagonal hole in the back of your Prusa Enclosure, and attaches with the ubiquitous M3 screw / nut. The adapter fits inside a…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Wydruk około 4,24 €–5,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This prints in two pieces to avoid the need for supports and is easily assembled with a few dabs of super glue. The cup portion was designed to fit our “ThermoFlask” water bottles and the base is designed to fit the cup holder of our 2020…
Wydruk około 4,37 €–5,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
This connects ¾" male NPS (i.e. NPT, MPT) threaded parts (e.g. " 3/4" x 1/2" Schedule 40 PVC Reducing Male Adapter ") to ¾" garden hoses. Increase the perimeters until the piece is completely solid to it will stand up to the water…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
This 3D design offers a solution to connect a 120mm fan to a resin 3D printer enclosure, facilitating the extraction of off-gasses from UV resin printing. Designed for a 120mm fan to fit a standard 4-inch duct (Dryer Duct), ensuring…
Wydruk około 5,60 €–6,84 € nettoWstępna wycena jednego wariantu
Adapter for connecting a 6mm PTFE hose to a 4mm reverse bowden PTFE tube. The holes are 4.1mm or 6.05mm in diameter and approx. 10mm deep. They therefore form a friction fit after contraction during printing. A conical area is provided…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had the porblem that my bicycle lamp sigma aura 100 was mounted on my handlebar and it did shine onto the garmin navigation device. I had the opportunity to mount it under the mount with a GoPro-Mount. So I designed a holder for my lamp…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was wondering if Quest 2 straps could be made compatible to the Quest 1. Indeed, it is possible. I liked the design of @sekazi (https://www.thingiverse.com/thing:4624192), but the adapter is movable, so I decided to make it 2mm longer…
Wydruk około 1,95 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
The Dremel 220-01 Mini Portable Drill Press is a fantastic foundation for a heat set insert press, as several other users have already made adapters for them: https://www.printables.com/model/13137-heat-set-insert-press-dremel-adapter…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These prints work as fully functional adapters for the Karcher VC-3 and similar. Fit is perfect for my printer even the snap-fit but as usual, your results may vary. Fusion360 file is included for easy modification. It's meant to…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite . It has 2 tabs for better attachment to the spool. No print support needed with this model. Print with 15% infill. It…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter system to mount a ZWO EAF electronic automatic focuser to a Samyang 135mm f/2.0 ED UMC lens for astrophotography. This is similar to other popular EAF mounts for William Optics Redcat 51 telescopes, but specifically…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Some time ago I published an adapter (see remix list) for using AA cells in place of C cells. That adapter works quite well in most cases, but I recently had an application that required a more ridgid shell. This new version takes longer…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Connect a 125mm and a 100mm piece of ducting with this adapter
Wydruk około 3,27 €–3,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter for Casio watches to wear a NATO strap. The 16mm lug size will fit most of the G-Shock watches upto 22mm wide straps. The 18 mm will fit bigger G-Shocks and Pro-Trek watches upto 24mm wide straps. The image shows a Casio…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Wydruk około 2,31 €–2,83 € nettoWstępna wycena jednego wariantu
I've missplaced my original pool drain cap to garden hose adapter so I created one that may not look like the original… but it works. from what I've read online.. its the same as a few others.. like coleman
Wydruk około 2,74 €–3,34 € nettoWstępna wycena jednego wariantu
The Idea: hide the record player pin inside the tower (up to 19 mm) show as much as possible of Hogwarts around the tower Design Process: I modeled everything myself but used this model as reference Overall dimensions: weight height…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
This model is only compatible with the Prusa Core One/+/Gen2 For the Core One L, check out the remix created by @NoryAndres Assembly Instructions If the remote switch isn't working properly, see the section titled “It's not working”…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Pipe fitting adapter/joiner for the drain hoses of a washing machine and condenser-dryer. As printed it fits my Bosch washer and Haier dryer perfectly. The model is parametric, so should be adjustable for other sizes. As uploaded, fits a…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this is an adapter to use Stabilo pens in a Cricut Joy plotter/cutter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 15 % Filament: does not matter PLA does not matter Notes: I used…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This should work with the HelloBaby camera models: HB6550/ HB65/ HB6339/ HB40/ HB6081/ HB66/ HB6351 (but it was only tested on the HB6550Pro model). The original adapter to HelloBaby flex mount broke for me, so I made this to replace it.…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
The Losi Rock Rey is a fun RC car, but it comes with lame EC3 battery connectors. You can trim the original part to fit XT60, but then it sticks out too far, and you might need to get longer screws if you use the nicer XT60H with the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
I created the case to have the module ("EBUS to WiFi adapter module" by Daniel Kucera) protected from dust. You may buy the module here: https://lectronz.com/products/54 In the correct orientation all the parts can be printed without…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
