Wyniki wyszukiwania: ducts

Sortowanie

303 modeli

P
PrintablesAl Mon

Omni Consumer Products - ED209

This is my 1/6th scale ED-209 from the original Robocop movie. I've decided to give it away for FREE. NO reposting on other sites. Consider this a Printables exclusive - else or NO MORE FREE _SHIT for anyone. Also, NO RESELLING OF PRINTS…

Pobrania
2704
Polubienia
934
Ocena
5
P
PrintablesPrintAndPaddle

The Minimalist - Wireless Charger for Apple Products

This holder is designed to make charging less cluttered and more organized. It’s made to perfectly fit your Apple wireless charger and cable, snapping right into place—no glue or tape needed! Includes built-in cable management on the…

Pobrania
2587
Polubienia
1042
Ocena
4,58
P
PrintablesJackJack3231

Voron V0 Auxiliary Fan Ducts

About Voron V0 Auxiliary Fan Ducts These are auxiliary fan mounts for the v0, which you can use if you need extra cooling on your Speedbenchy journey. The ducts can be easily installed after the Printer has already been fully assembled,…

Pobrania
2047
Polubienia
547
Ocena
4,97
P
Printablesfelipejfc

Ender 3 v3 SE 5015 blower fan ducts

I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :) I managed to print the left one without any supports and for the…

Pobrania
1325
Polubienia
195
Ocena
4,5
P
PrintablesFabreeko Speedy

EVA 3 Beacon Probe UHF / Volcano Ducts

I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…

Pobrania
858
Polubienia
104
Ocena
5
P
PrintablesMkloberg

Display Case for Knomi V2 and Taurus Series Cooling Ducts / Creality Sprite Extruders (Touch Enabled)

Basics & Demo This display case tightly fits onto the Taurus cooling duct, version 2 and up. You can find this cooling duct here: https://www.printables.com/model/511962 If you're not already running a Taurus cooling duct that you are…

Pobrania
532
Polubienia
129
Ocena
4,83
P
PrintablesFabreeko Speedy

EVA 3 Beacon Probe Default / HF Ducts

You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board. This uses 3.8mm…

Pobrania
506
Polubienia
48
Ocena
5
P

Ender 3 V3 SE Dual 5015 Fan Ducts for KE/K1 Hotend

Design has some quirks but the airflow is good. May tweak in the future. Use M3x20-25mm screws to attach the fans - holes on the duct are friction fit and should take some work the first time. Use stock M3 screws to attach the ducts to…

Pobrania
445
Polubienia
61
Ocena
0
P
PrintablesEPSYLON 3D

Anycubic kobra max hotend cover dual 5010 fan ducts

STILL IN PROGRESS!!!! Report me any trouble you see or any ideas you have for adapt this cover. Some problems can appears with air flow in some case. i'm searching a way to correct it. Update 03/06/2023: new design to test, please give me…

Pobrania
443
Polubienia
41
Ocena
0
P
PrintablesLee82UK

Twotrees Sapphire Plus SP-5 v1.1 modular BIQU H2 extruder mount and ducts - zero nozzle offset

This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…

Pobrania
434
Polubienia
52
Ocena
3,5
P
PrintablesMistertech

Portable Air Conditioner Accordion Duct Collar for 5" ducts

This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The outside diameter is 169mm to allow it to be printable on most printers. I have added a second model that includes screw…

Pobrania
434
Polubienia
76
Ocena
5
P
PrintablesSteve

High flow ducts for SV06+ single and double 5015 part cooling fans. Stock, K1 or Volcano nozzle.

Two versions Z2.5 for stock nozzle no changes needed. Also suites K1 nozzle with 0.7mm extra clearance over stock. Z4.0 For Volcano nozzle. Multiple Fan adaptor options 2 x 5015 1 x 5015 For K1 and Volcano nozzle refer to the Nozzle/Heat…

Pobrania
431
Polubienia
55
Ocena
5
P
Printables由乃 楠城

VORON V0.2 Auxilliary Fan Ducts 12032

BOM 8× M3×14 BHCS 4× M3×8 BHCS 8× M3 heat inserts 4× 3×6 Magnet Material ABS, or ASA for best results Print Settings 0.2mm layer height, 2-3 perimeters, ~25% infill are more than enough.

Pobrania
431
Polubienia
71
Ocena
0
P
Printablesmakko

FlashForge Adventurer 5M (AD5M) cooling ducts

Yet another cooling duct for AD5M. Fairly lightweight, under 20 grams printed with the modifier from PET-CF. The first model is tested only with AliExpress aftermarket nozzle, the 2nd one is for Original nozzle and Phaetus Conch. Modifier…

Pobrania
369
Polubienia
79
Ocena
5
P
PrintablesAlex B

AnkerMake M5 Dual 4020 sidemount part cooler ducts

Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…

Pobrania
351
Polubienia
63
Ocena
4

Slammed/Full Size Ducts for Baby Ape/5-Inch FPV Drone

Baby Ape 3" ducts will fit perfectly. 5 inch ducts will fit any quad using 5" propellers. These don't have a full duct shape but offer a middle ground allowing for fitting in most places.

Pobrania
342
Polubienia
46
Ocena
3
P
PrintablesKrzysiek

Ender 3 v3 SE dual 5015 fan ducts

Let me introduce my own project, it was created to eliminate cheap 5015 fan rattling problem mounted perpendicular when X-axis move. To solve that I place both fans parallel to X-axis, also move it ale the way up that they can take cold…

Pobrania
341
Polubienia
81
Ocena
5
P
Printablesalexktz

Magnetic Dust Port Adapters for 4-inch (100mm) ducts

Here's my take on quick change magnetic dust ports - fusion files included (parametric as best I could). Requires 12 8x3mm Neodymium Magnets ( Amazon affiliate link ) is opposite polarity every other slot. Depending on the tolerances of…

Pobrania
333
Polubienia
57
Ocena
5
P
Printablesmindparadox

Dewalt TSTAK organiser inserts (should fit some other Stanley / Black & Decker products)

Updates to ari.mandjelikian 's excellent model to add a few more options to help with storing smaller items. The three-tier version has small pegs to help it locate correctly on the lowest level box that will need some supports. The top…

Pobrania
285
Polubienia
55
Ocena
5
P
PrintablesWavz3D

Sovol SV04 5015 Fan Ducts

REMIX from: https://www.thingiverse.com/thing:5191744 Great Design! This upgrade will allow the use of 5015 Blower fans on your SV04. These fans & ducts may cause worry for those that like loud fans. Db meter showed a -6Db over stock (+/-…

Pobrania
280
Polubienia
48
Ocena
0
P
Printablesjurassic73

Original MK3S+ fan shroud remixed to create three ducts

Remixed the MK3s+ fan shroud to add a few partitions to ensure air splits up to flow out the side vents. Not sure the impact of this but it doesn't seem to hurt. :)

Pobrania
259
Polubienia
19
Ocena
5
P
Printablesprouting

Ducts FLsun SR Bambu

Circular Duct and other ducts for Flsun Super racer with Bambu and Direct drives circular duct is not compatible with support level bed! for circular print supports only platform bed and no supports for others added mini test duct enjoy!…

Pobrania
255
Polubienia
23
Ocena
0
P
PrintablesDaniel Parts

Ender 3 v3 SE 5015 blower fan ducts stable version

I made a remix of the original model by FelipeCavalc_1744406 which is more stable and a bit more closed the right fan

Pobrania
232
Polubienia
34
Ocena
5
P
Printablesalexan_e

Kingroon KP3S dual 5015 fan frame and ducts (3D touch update)

The design uses two 5015 fans with two fan ducts, one at the front and one on the left side. [THIS IS NOT NEEDED, THE FAN FITS ON THE LEFT SIDE FINE] To make space for the left side fan duct the 3010 heatbreak fan has to be rotated to the…

Pobrania
232
Polubienia
52
Ocena
5
P
Printablesmjones866

BMW K1200 Throttle Body Pod Filter Ducts

BMW K1200 ITB air duct pod filter connectors. This effort was to repurpose the OEM airbox on my K1100 project and utilize the space in the airbox for such things a the main battery and possibly other electronics. Yes, the designs here are…

Pobrania
219
Polubienia
10
Ocena
0
P
PrintablesAlex Pinson

Bambu Lab A1 Enclosure Cooling Ducts

These cooling ducts mount under the A1 and create a duct that passes from the vents on the sides of the printer to the vents on the underside, allowing you to pull air across the passively-cooled electronics and more safely enclose your…

Pobrania
218
Polubienia
58
Ocena
0
P
PrintablesDirtClodimus

Ender 2 Pro 4010 Blower Fan Ducts

I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version.…

Pobrania
212
Polubienia
12
Ocena
0
P
PrintablesD3Cove

Jonsbo N1 Fan and HDD Air Ducts

The Jonsbo N1 is a sleek and modern RAID tower case perfect for a DIY home office server. Set up as a virtualization server, however, the CPU and mainboard area becomes hotter than ideal. Air from the front fan disperses en route,…

Pobrania
209
Polubienia
17
Ocena
5

E3D V6 part cooler / fan ducts / dual 40mm fans

Plug & Play dual fan ducts for the E3D V6 This designs allows you to place a dual 40mm filament cooler fan integrated with the E3D own 30mm hot end cooling fan. There are two version. One with a ring-shaped end and a more traditional one.…

Pobrania
206
Polubienia
28
Ocena
5
P
Printablesjakpaul

Larger cable opening Voron 2.4 back panel cable ducts

Remix of AsBurli 's awesome design of a cable duct for Voron 2.4 3D printers mounted to the back panel. This version adds a large opening on the end of the top/bottom piece and uses two screws for mounting instead of one. There is also an…

Pobrania
187
Polubienia
47
Ocena
5
P
PrintablesJay_L

4020 Blower Fan Ducts

4020 blower fan ducts design to work with The Mint Mount. Requires M3 screws for a secure mount. 25-04-2021 - Updated design to provide more clearance. Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: Yes Resolution: 0.2…

Pobrania
185
Polubienia
11
Ocena
0
P
PrintablesHamXSlamwich

Neptune 3 Pro Open Face 5015 Fan Ducts

EDIT: V2 is now available here: https://www.printables.com/model/513904-neptune-3-pro-open-face-dual-5015-fan-duct-v2 This fan duct setup was designed to solve 2 problems: First, a lot of the aftermarket fan ducts for the Neptune 3 Pro…

Pobrania
168
Polubienia
40
Ocena
0
P
PrintablesMatvei

Mantis toolhead Dragon/Rapido UHF neopixel ducts

Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…

Pobrania
166
Polubienia
31
Ocena
0
P
PrintablesBrentj84

RatRig V-Core 3 3030 Wiring Ducts

These wire ducts are designed to attach to the 3030 extrusion at the bottom of the electronics portion of the RatRig V-Core 3. There are 4 different lengths of ducts depending on the size of the V-Core (200mm, 300mm, 400mm, 500mm). They…

Pobrania
163
Polubienia
44
Ocena
5
P
Printablesspiggytech

AnkerMake M5 "Mouth Guard" Ducts [Redux]

All credit to @ AustinDennis_479320 , @Jared_273781 , and @BlakeDouglas_545792 who created and tested the original design The following modifications have been made: The screw holes are shrunken down to 2mm diameter because my screw holes…

Pobrania
163
Polubienia
27
Ocena
5
P
PrintablesMattia Cornali

FLSUN Q5 swappable / interchangeable cooling ducts

An easy to use, lightweight, swappable cooling duct system with different attachments. Once the top latch is mounted below the radial fan, it is very easy to swap out different attachments by sliding them on and off from the top part.…

Pobrania
155
Polubienia
20
Ocena
5
P
Printables404

Hero Me Gen7 CPAP dual ducts

Hero Me Gen7 CPAP dual ducts Use with 18mm internal diameter CPAP hose. Cheap hose: https://s.click.aliexpress.com/e/_Dcjs6K7 Update 2023-12-02 Added a STEP file as requested

Pobrania
155
Polubienia
24
Ocena
5
P
Printables3D PRINT

Auxiliary products for Airbrush

Auxiliary products for Airbrush, suitable for Vallejo.. Positions for 1x200ml, 5x 60ml, 2x32ml, 1x17ml bottles, 2x hole for cotton buds or tampons and 3x positions for brushes, scalpel, etc. The vents are only decorative, they have no…

Pobrania
150
Polubienia
33
Ocena
0
P
PrintablesYathani

EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert)

EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert).

Pobrania
149
Polubienia
25
Ocena
5
P
PrintablesHjort Creations

EVA 3 Beacon Rev H - UHF Volcano Ducts

Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…

Pobrania
149
Polubienia
12
Ocena
5
P
PrintablesWARXion

Toyota MR2 SW20 - Foglight Brake Ducts

A plug must be removed from the bumper to fit perfectly. Cut a hole on the wheel arch and screw the other part on with the cap. Designed for 60mm wide pipes.

Pobrania
146
Polubienia
11
Ocena
0
P
PrintablesSkye

AnkerMake M5 Base Cooling ducts

Running the Ankermake M5 in a diy wooden-based enclosure facing issues with overheating these ducts will allow a slot to be cut into the base of the enclosure for improved cooling without compromising the temperature of the enclosure.…

Pobrania
144
Polubienia
58
Ocena
5
P
PrintablesLanakila

Ender 3 v3 SE 5015 blower fan ducts with g-sensor mount

Combination of duct and g-sensor mount

Pobrania
141
Polubienia
23
Ocena
0
P
PrintablesKestin

CreatBot F430 Fan Ducts

Improved part cooling fan duct designs for the CreatBot F430 printer. Recommended to print using ABS, Nylon, or other high-temp filaments. Print Settings Printer: CreatBot F430 Rafts: No Supports: No Nozzle Size: 0.4mm Layer Height: 0.2mm…

Pobrania
139
Polubienia
4
Ocena
0
P
PrintablesAndré

Nemesis Technical Corridor / ducts

PERSONAL USE ONLY Reason: The ventilation was grabbed from: https://nextlevelboardgaming.com/product/nemesis-3d-game-board-stl-files/ If you decide to use it for other purpose, check the site and purchase a license, it that's applicable,…

Pobrania
138
Polubienia
19
Ocena
5
P
PrintablesSteve

Sovol SV06 Plus Heat Bed Cable Horizontal Bend for rear mounted 5015 cooling ducts

Horizontal bend to miss rear mounted cooling fans and wall allowing full use of the rear left of the bed.

Pobrania
137
Polubienia
14
Ocena
4,67
P
Printablesweav

Qidi Q2 3010 Hotend Fan Mount *updated version for v51 and v60 Part Cooling Ducts added

3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…

Pobrania
123
Polubienia
27
Ocena
5
P
PrintablesAzia

Stackable Organizer Rack for Serums, beauty products or spices

This is a drawer organizer for the IKEA Malm vanity, or any other vanity you have. This organizer is stackable and perfect for foundations and serums. This makes the products accessible while saving space- fits most of the popular make up…

Pobrania
121
Polubienia
27
Ocena
5
P
PrintablesJohanTess

5015 Dual fan ducts for Modular BIQU H2 Mount for Ender 3.X

I like the concept of the Modular BIQU H2 Mount for Ender 3.X But I wanted to use my existing base mounting plate. The CR Toch was too close and the duct didn't fit. The original design is slimmed down so it can fit BIQU H2 Ender 3 V2…

Pobrania
119
Polubienia
15
Ocena
0

Airspeed Testing Ducts for Axial 4020 vs Blower 5015 fans (UNI-T UT363)

I made these when I was testing axial vs blower fans for print cooling. 5015 fan mounts just by friction, 4010 & 4020 fans mounts by basic 3mm wood screws. Video if you want the details:

Pobrania
114
Polubienia
25
Ocena
0
P
PrintablesJohan

Exhaust plenum for 100mm ducts (parametric model)

For anyone who needs a simple exhaust plenum. I'm working on upgrading my 3D printer ventilation system and needed some bents, ducts and exhaust plenums etc. Figured I might design and print the parts myself. Even with the size of these…

Pobrania
108
Polubienia
15
Ocena
5
P
PrintablesPeter Martin

Bathroom Tidy for Shaving Products, Razor and Accessories

A Holder for Shaving Foam, Razor, Balm, Aftershave, small comb and scissors. Keep your stuff handy and tidy. SIZE 205mm x 75mm x 45mm : New Design October 2023. A NEW improved version now available : - Shave Organiser by Peter Martin |…

Pobrania
108
Polubienia
28
Ocena
4

OpenBuilds fan ducts for PSU and BlackBox

These are fan ducts for the OpenBuilds Blackbox and OpenBuilds power supply (PSU). While in a perfect setup both would be in a separate enclosure free from any dust, some setups don't have the room for that. To keep dust out of the PSU…

Pobrania
107
Polubienia
10
Ocena
5
P
PrintablesBryzarr

Qidi X-Max 3 Better cooling ducts

This is a cooling duct for the Qidi X-max 3 printer. It uses a standard 5015 blower fan. I have loved this tank of a machine, quality is great, speed is great, etc… I have NEVER understood why Qidi went with the sexy exterior design of…

Pobrania
104
Polubienia
16
Ocena
5
P
Printables53Aries

K3D Sprite Dual 5015 - Separated Ducts

The left and right side have been separated so each fan has it's own path. No other changes made.

Pobrania
102
Polubienia
17
Ocena
5
P
Printablesclint.m.harris

OCP - Omni Consumer Products Coaster

print the OCP logo face down with whatever surface texture you desire. The base plate can print bottom down. Paint the letters and then varnish them. Glue the OCP logo down and then watch Robocop spread justice.

Pobrania
102
Polubienia
17
Ocena
0
P
PrintablesMartins3DStuff

FT EMS Shorter Cable Ducts

I needed shorter Cable Ducts for my build, so i created this Hackjob in Prusa Slicer...

Pobrania
101
Polubienia
14
Ocena
5
P
PrintablesPataBenda

Menstrual Products Dispenser / Zásobník na hygienické vložky

EN This is a dispenser for women’s hygiene products, intended for use in public restrooms (schools, offices, shopping centers, etc.). As of January 2026, a regulation comes into effect in the Czech Republic requiring the provision of…

Pobrania
101
Polubienia
9
Ocena
0
P
PrintablesFailerko

E3 NG v1.2 Xol carriage with Beacon mount version for UHF ducts

I have modified the original NG X carriage to mount the Xol toolhead while not losing any X or Y build volume and be as close as possible to the stock toolhead in terms of reach allowing (hopefully) full compatibility with tools mounted…

Pobrania
100
Polubienia
19
Ocena
0
P
PrintablesHieronymus

Prusa Core One/+ Particle evacuation Ø80/Ø100/Ø125 ducts

Prusa Core One + Particle Evacuation System Print Settings: This model is optimized for PETG printing at a 0.2mm layer height. Supports are required for: The base The upper part of the closure valve The pipe elbow update : Base horizontal…

Pobrania
100
Polubienia
34
Ocena
5
P
PrintablesMisplacedMoose

BCAR for SpitfireProducts Ranger Sniper Nerf Rifle

Hardware required: 42 x F683ZZ 3X7X3 bearings 42 3x22mm (or shorter) pins These can be found on Aliexpress, Amazon, or Moose Mod Shop

Pobrania
100
Polubienia
31
Ocena
0
P
PrintablesMKLand

Gridfinity Large Bins for Hair/Makeup products

I used the OnShape Gridfinity files adjusted by youtuber PinoyDIY and made some larger bins for my bathroom drawer. I thought I'd add them here for anyone. Original gridfinity system made by Zach Freedman for use with Fusion 360.…

Pobrania
100
Polubienia
22
Ocena
0
P
PrintablesDruid

Connector for Airducts 120mm and 100mm

Connector for Airducts 120mm and 100mm

Pobrania
98
Polubienia
14
Ocena
5

Skelefan - Ultralight fan ducts for Infimech TX

Print in ABS/ASA or better because of heat. Reuses the fans that come on it or get some new 4010 blowers. 2 10-15mm m3's to attach to back of hot end. 2 tiny self taping screws to attach fans to ducts/bracket. Organic supports. Set to…

Pobrania
98
Polubienia
24
Ocena
5
P
Printableswill

Ender 3 s1 pro side ducts V2win

Intro I really wanted a better cooling but without sacrificing the visibility to the print head to see how is going the first layer also lately I’ve been doing some multicolor prints and Taurus or other versions were not very handy. First…

Pobrania
92
Polubienia
19
Ocena
0
P
PrintablesJohnny5

Ramps 1.4, Arduino MEGA, LCD adapter slide box with optional twin fan ducts

This little gem was inspired by a ton of variations of ramps boxes i found through the search function... I was looking to keep my drivers cool and keep little fingers (like those of my kids) and teeth (like those of my cat) from touching…

Pobrania
91
Polubienia
5
Ocena
0
P
PrintablesIonNight

Noctua NF-A20 shelf/table mount and ducts

Noctua NF-A20 fan duct and table clamp mount I chose to go for table clamps on this one, bc the A20 fan is heavier than the 120 and 140mm fans. A table stand would be a lot bigger and I dont want to waste filament if I dont have to The…

Pobrania
89
Polubienia
14
Ocena
5
P
PrintablesVITO

Fan Ducts for Vyper Printhead

No Support needed. Print in Asa for best results. Find Markus Schlenkers printhead here: https://www.printables.com/de/model/372802-anycubic-vyper-custom-print-head-v1v3-with-2x5015-

Pobrania
86
Polubienia
7
Ocena
0
P
PrintablesJigman

FLSUN v400 5015 Dual Fan Ducts

Introduction This model allows for the use of dual 5015 fans on the FLSUN v400. The dimensions were based on ChrisCampbell 's FLsun v400 Cooling Fans 5015 Adapter and Nyndroth 's remix . The front fan cover remains unchanged and also…

Pobrania
85
Polubienia
13
Ocena
0
P
PrintablesBadMouth

Tiny-M V5 Toolhead Shroud with larger cooling ducts

THIS PROJECT WAS HACKED TOGETHER IN TINKERCAD, SO THERE ARE NO CAD FILES. If you haven't already started a Tiny-M V5, keep in mind that it is an incomplete project. Some beta files are there, but there is no CAD file of the complete…

Pobrania
85
Polubienia
11
Ocena
0
P
PrintablesPooh Bare

Custom Stock Fan Ducts Neptune 3 Max

No bolts to hold as it's nice and tight, just push in the fans after attaching to extruder. Furthest edge from nozzle can be pushed in all the way until it stops , then carefully push & level out the other side. Use these 2 screws (one…

Pobrania
83
Polubienia
13
Ocena
0
P
PrintablesS3DP

Prusa MK3S MK3S+ Frame MountTool Holder - Specialist 3D Products

Print upside down on textured bed with PETG. 0.2mm layer height. *New second version has a heap more holes for hex keys and other tools

Pobrania
83
Polubienia
19
Ocena
4,67
P
PrintablesJohn Doe

Vanquish Products VS4-10 (Twin VFD Transmission) shift servo mount

I needed a way to securely mount the servos on my VS4-10 builders kit chassis. Since I was using a custom body and some other modifications, other options didn't work for me in a clean way. I can''t guarantee that this will fit with the…

Pobrania
81
Polubienia
4
Ocena
0
P
Printableswerkstrom

Minimalistic encloseure for newer Shelly line of products V1.1

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…

Pobrania
80
Polubienia
12
Ocena
0
P
PrintablesPaskuRT

GEP RC Cinelog 25 Propeller protection ducts

Ducts made of a single piece easy to print, use PETG layer height 0.2, print with the ducts up so that the motors sit well in the frame, printing supports are required

Pobrania
80
Polubienia
5
Ocena
4
P
PrintablesRitchbitch

eB Dual 4010 Fan Shroud - Longer Ducts (+16mm) for Ender 3 CR-10 CR-30 etc.

I love Crypt's Remix of Gibbed's EB Fan Shroud , so i elongated the fan ducts to test a high flow nozzle adapter on my CR-30.

Pobrania
80
Polubienia
14
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Cinewhoop Conversion Ducts

Print in PETG Props need to be trimmed a litte bit

Pobrania
80
Polubienia
13
Ocena
0
P
Printableslars_kglr

Hook for VESKEN Products from IKEA

Fits perfect on IKEA VESKEN Products

Pobrania
79
Polubienia
11
Ocena
4
P
Printableskame

Angled Ventilation Ducts 100mm

Get your ducts in order! Angled ducts with wide turns to ensure smooth airflow. Printing PLA or PETG 100% infill 0.2mm No brim Print with one end flush to the printer bed Supports recommended under 135 degrees, but your printer might be…

Pobrania
78
Polubienia
12
Ocena
0
P
PrintablesSnowHead

Replacement Rung Lock for TecTake Telescope Ladder and identical Products

The original rung lock of the ladder has a constructional issue causing a predefined breakpoint at the begin of the lock tongues. So a lot of these locks breaks over the time and can't be bought separate. The new designed part does not…

Pobrania
76
Polubienia
7
Ocena
5
P
Printablesjanjanjan

V0.2 Inverted Auxilliary Fan Ducts 12032

i used https://www.printables.com/model/553657-siboor-voron-v0-blower-duct to be able to use this in combination with my Rainbow Matchsticks 0.2mm layer height, 3 perimeters, ~25% infill.

Pobrania
76
Polubienia
15
Ocena
0
P
PrintablesAkeno

Box with slide lid for beauty products, small items or divers

Box with slide lid for beauty products, small items or divers. 3 different versions with 9 variants each and 3 different lids in 2 variants I printed it with Prusament PETG Jet Black filament. Additional notes Please support my work give…

Pobrania
75
Polubienia
5
Ocena
0
P
PrintablesBecker Thorne

OCP - Omni Consumer Products, License Plate Frame, Robocop

OCP - Omni Consumer Products, License Plate Frame, Robocop Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos

Pobrania
74
Polubienia
18
Ocena
0
P
PrintablesPlayful3D

Fat Burner Ender 3 V3 KE Microswiss compatible ducts

Since the Microswiss hot end hangs a bit lower then the standard hot end of the Ender 3 V3 KE, the ducts of the Fatburner cooler are too high, so I attempted too lower them. The added photo is with ducts from the ‘original’ Fat Burner…

Pobrania
74
Polubienia
27
Ocena
5
P
PrintablesDinky Toyz

Flashforge Adventurer 3 "adjustable" air ducts

These are a number of air ducts that can be used with the FlashForge Adventurer 3 Airduct Mod by GyuOh Choi, as a way to get some kind of adjustable parts cooling with the Flashforge Adventurer 3. The percentages stamped on the ducts are…

Pobrania
71
Polubienia
12
Ocena
0
P
Printablesdlh

Mini Satsana for Ender 3 V2 - extra space for hottend, screw, fan ducts - no BL touch

I liked the mini Satsana for the Ender 3 V2 but wanted a few tweaks. Specifically: The fan ducts are lifted 1mm so there's a little more space above the printed part, which was very close to the ducts with my hotend. The opening for the…

Pobrania
71
Polubienia
7
Ocena
0
P
Printablesminilogique

Voron CrownCooler dual ducts

01.2025 - had some issues with the back-to-front version, it melted at higher temps. Added a new model with duct tips moved 5mm away from the nozzle without the louvred tips aka got them more solid aswell. Currently testing and…

Pobrania
70
Polubienia
12
Ocena
0
P
PrintablesAlex Bogdan

Anycubic Kobra Go Custom Head Fan Ducts(For Community Testing)

I designed these fan ducts in hopes of providing the design with both a more efficient duct and eliminating the guess work of aligning the ducts. Since I don't have the time right now to properly test those ducts and i don't know CFD…

Pobrania
69
Polubienia
11
Ocena
0
P
PrintablesGhosu

Vegan Sign (to highlight vegan products/food)

Vegan Sign Just a simple remix, I'm using it to highlight vegan products/food Printed at first and regular 0,2 layer…the M600 pause for color change should be around layer 11

Pobrania
69
Polubienia
6
Ocena
0
P
PrintablesMatthias

Brace + connector and cover for 204 x 60 ventilation ducts

The 204 model is for fixing the naked ducts to the wall. The 208 model is the on for fixing the duct connectors The sleeve is for connecting 2 ducts together The cover is for closing the end of a duct Print with full walls and preferably…

Pobrania
67
Polubienia
12
Ocena
0
P
PrintablesSlanjonok

N: Connecting T-Trak modules using viaducts

Kato offers viaduct tracks with a height of 60mm (track base above bottom). At same time and by whatever reason T-Trak-modules, that are heavily based on Kato’s Unitrack system, are defined at a height of 70mm. Isn’t this crazy? But here…

Pobrania
60
Polubienia
16
Ocena
0
P

Apex 5 EVO - AIR DUCTS

Elegant, useful, and efficient! They protect the top of the stack and help cool the components better. PRINT SETTINGS: -pla -30 % INFILL

Pobrania
60
Polubienia
4
Ocena
0
P
PrintablesTopdog

Stealthchanger anthead uhf dock and ducts

works well for my rapdio 2 plus uhf

Pobrania
58
Polubienia
8
Ocena
0
P
PrintablesTheMagicD

Sovol Sv04 Fan ducts for 5015 24v fan

These have the same internal geometry but have different screw hole positions for them to line up with the nozzle. This does not decrease your mirror or copy print space The right fan duct needs to have 2x spacers printed but the left…

Pobrania
58
Polubienia
10
Ocena
0
P
PrintablesFC2M3D

SILVERCREST handheld vacuum pump adaptor for ZWILLING vacuum storage products

I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…

Pobrania
57
Polubienia
10
Ocena
0
P
PrintablesMeshMaster3D

Anycubic Kobra Go Neo Part Cooler Fan Ducts V.1

Anycubic Kobra Go Printhead / Part-Cooler & Fan-Ducts May fit other Makes / Models Revision 1 By: David Orlo Part Details This was one of the first upgrades I designed and finalized for the Printer. Soon after completing this model, I…

Pobrania
56
Polubienia
10
Ocena
0
P
PrintablesJoe

JGAurora A5S (A5) Fans/Cooling Ducts

My Cooling Ducts using Fans 5015 24V https://www.amazon.com/gp/product/B079BPS9Q8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 The Hot End Duct ONLY was Remixed (Completely Redrawn) from https://www.thingiverse.com/thing:2994069 Print…

Pobrania
56
Polubienia
1
Ocena
0
P
PrintablesStudmuffin

XOL-Toolhead 17-19mm CPAP Ducts

Tested with 19mm hose. Likely works down to 17mm and up to 20mm. Paint on supports as shown. This is meant for a hose with the end cut off. Use a ziptie to secure the hose.

Pobrania
55
Polubienia
7
Ocena
5

Eye Products Organizer Gridfinity Set (glasses, glasses fabric, lenses, eyedrops)

With the total of 6 individual gridfinity bin models, they combine into a 1 full set of eye related products organizer. The model in the first image is an organizer for glasses. The semi-circle dents around the bridge of the glasses…

Pobrania
55
Polubienia
8
Ocena
0