4396 modeli
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
This is a practical, printed 608 Bearing suitable for many DIY projects (for example in a spool holder). It is a fully functional roller bearing with a proper working cage. It runs like a real bearing with a smooth action, tight fit & low…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Generate working or placeholder bearings of any diameter. Use OpenSCAD to generate any size bearing. (Imported from Thingiverse. Originally published: 26 Aug 2016) Print Settings Rafts: No Supports: Depends
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magic Coin Disappearing Trick for 1 euro cent Print files coin1+coin3 then print file coin2 with pause and insert coin3 inside. Total time: 40min+30min - 0.3 Layer Fusion360 file added
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You'll need some 6mm BB gun ammo. (The ones I used had a real diameter of 5.9mm, measured with calipers.) If you want to check that your BBs will work with this print, you can print the top and bottom sections from the “Test prints”…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
50x20x10 Roller Bearing with roller cage The roller geometry allows it to be loaded axially to a certain level. Tolerances between the rings and the roller is available in 0.15 mm and 0.1 mm. Printing: Print orientation: print it on the…
Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Sliding bearing for tank tracs wheels. Material ABS.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
I had bunch of CRC grease tubes in garage, and wanted to design LM8UU bearing greaser nozzle with caps, so you can keep them even in your home office drawer without cleaning them. Nozzle screws into 100 ml CRC grease tube. Top cap seals…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
ИСЧЕЗАЮЩИЕ ОБЪЕКТЫ ВОЛШЕБНАЯ ШКАТУЛКА С ТРЮКАМИ. НАБОР ИГРУШЕК ФОКУСНИКА.
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm. Basta fazer o slicing com as definições a baixo e deve sair tal como a…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another design from the 3D printing emoji collection. A cute reminder to continue wearing your face mask. Whether it will be magnet badges, pins or something else, there are many possibilities and can be customized by yourself. The emojis…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“Story”: The rims are designed to fit bearings inside, you can mount them on the standard axis with the drive in nut or fix it with a normal bolt and nut. As bearings i designed it to fit 6000 2RS ball bearings. Super cheap and durable.…
Wydruk około 21,42 €–26,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Took the existing LM10UU adapter into Blender and extended the open area by 26mm.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…
Wydruk około 9,53 €–11,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Centre marker tool set 120 and 160 mm width, 3 models included, with ball bearings and several guides. The thumbscrews are also included but you may use your own steel screws if you like. I also created a set of guides to keep the marker…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
I think the eibos cyclopes is great. Only the supplied bearings were much too stiff for me. The holder is inserted into the existing receptacle. I installed the Bones ball bearings 18022 in the wheels. Now it runs perfectly and without…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tinmorry cardboard filament spool ZZ608 bearing adapter with 54.3 mm diameter. For a better installation turn the adapter clockwise. V2: more easy bearing installation
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
The mount holes are for original 18mm, bars. Needs: Print 2 x walls by spool Buy 4 x ball bearings 608 Reuse 2 screws M3x10 (Warning: this is not a bone for dogs ;-) )
Wydruk około 1,98 €–2,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model of radial bearing type 608-2RS-C3 commonly used in part assemblies.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
This filament spool holder is designed specifically for the Prusa MINI and mounts directly on top of the Z tower. It uses a fixed axle that runs through the center of the spool, preventing the common issue of spools falling off the stock…
Wydruk około 5,97 €–7,30 € nettoWstępna wycena jednego wariantu
A simple earing with the shape of resistance symbol, with a heart added for Valentine day. Designed for bi-color printing. Printed with nozze 0.25 layer 0.15mm Change color for the 3 lasts layers The model in photo was PLA printed with…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is a variation of Storage for 22mm Rollerblade & Rollerskate Bearings by “kevsparky”. The original holder was upgraded with skewers so it will be easier to insert bearings into the corresponding slots. The lid was added as well.…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
I bought the wrong bearings, so I changed another remix to fit my bearings.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts: 1x M12x330mm Gewindestange (Zweierpack für 2,99€) 2x M12 Muttern (Viererpack 1,49€) 2x Korrosseriescheibe 13x37mm (2 = 0,47€) 2x Karrosseriescheibe 17x50mm (2 = 1,49€) Gesamt: 6,76€ The diy-steuersatz-werkzeug (Headset Bearing Cup…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was having trouble with my spools popping off their wheels when the spools were new and at their heaviest. Hence, this alternative spool holder for Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research using 6901 bearings to…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This is a light-duty bearing we made for a toy boat project. The STL and gcode are set for ¼" shaft and #4 screws but the parameters can be adjusted in the OpenSCAD model.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
it is specially designed to hold the filament spool securely in place while allowing it to rotate freely as the printer operates. it typically features bearings to reduce friction and ensure smooth filament feeding during printing and…
Wydruk około 6,04 €–7,38 € nettoWstępna wycena jednego wariantu
Fits at least a President-brand luggage. Originals had “hand brake” on due to poor design, wear and tear. These have two 608 ball bearings. I used PLA, but I guess ABS / PETG would work fine too. I used a M5 machine screw as shaft, and…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A PIP clamshell (hinged) storage box for Phonax (NHS) hearing aids. Room included to allow battery compartments to be opened to turn off aids whilst in storage. Low profile - 10mm deep when closed. Recesses for 2 x 8mm (depth 2mm) magnets…
Wydruk około 2,17 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Falls euch wie mir der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt. Der Aufsatz verhindert das die Walzen beim ausschlagen aus dem Lager fallen. Mit einem entsprechenden großflächigem Aufsatz kann es nun aus dem…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Remixed "bearing holders" for the Spool holder for Prusa MINI Flexible by Madaco to fit Bones Reds bearings with a 7mm inner diameter. (the kind you get in the 16 pack). You certainly don't need skateboard bearings for this project, but…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wonderful upgrade for your diy "IKEA" filament drying box. This makeshift bearing simply centers the roller on the main axis in the box, which is made of 1/4 (25mm) PVC pipe. Spreading the load helps pull the filament out of the…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am currently trying to convert my Ender 3 to a linear rod system instead of the radial bearing system it uses. In doing so, I ran into a few mounting hurdles for the bearings as I am using Alu rods (for the time being). Thus,…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Simple 625 filament guide used on my DIY enlosure You need to print the inner-625.stl 2 times printed with PLA+ secure with a M3x20 screw
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
The contest to design and print with Kaika logo is held by TECDIA. I tried to utilize the logo for accessories. So I modified original design. I used small one for earing, and added some beads. This can be printed in short time on Prusa…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
I was curious if a fidget would have less friction without the bearings (as provided by a previous design). This design simply uses a v shape to keep the inner and ourter races together. It seems to have lower friction than the bearing…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
In my search for a Gridfinity solution to organize my 608 bearings, I discovered one that meets my needs. However, I've faced a problem where PrusaSlicer begins printing the screw holes suspended in the air. To remedy this, I've added…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
6200 Ball Bearing with HEART! Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Simple design easy print Extra parts needed bearing and m5 screw Pause close to the top and insert the bearing. You will not be able to insert it later. Print files for MK4 attached.
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
SplineXL tubes are notoriously loose in bearings due to the rounded crown of the tube. This provides little surface area to ride on the bearing. MAXSpline is slightly better, but can use some help on occasion. These tubes are 1 way…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description The official charger for the Philips MiniRTE 9050 hearing aids is massively oversized —perfectly fine at home, but far from ideal when traveling. Since I already carry a universal USB-C charger for my iPhone, iPad, and Apple…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in place small bearing set: https://www.printables.com/model/542689-print-in-place-small-bearings Print in place BALL bearing set: https://www.printables.com/cs/model/583731-print-in-place-ball-bearings Thanks, 3Dprintsmith for his…
This is a Gear Bearing with powerful performance. This bearing has perfect tolerance and rotational performance (about 6 seconds of rotation). And unlike other gear bearings, it takes almost half the time to print. It's even easier to…
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
Low poly rearing horse Print instructions Print it lying on its side by (not standing) (rotate by 90deg) + use supports = it will be far stronger
This is not an easy print. Your printer MUST be dialed in well. If you aren’t sure about your printers tolerance abilities, print this first- https://www.prusaprinters.org/prints/127569-s-shaped-tolerance-test-01-04mm-in-002mm-increment…
Quick tips for successful print: Use 3Dlac, glue stick, or Magigoo for better adhesion. ..or simply clean the bed with isopropyl Reduce flow rate to .95 If you are experiencing difficulty with bearing rotation, don't worry it should…
Dust cover for Z axis bearings. Prevention is better than cure.
This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
Versions: V2, 10/18/2022: Fixed inner diameter to match 608 specification. Added extreme tolerances for perfectionists. Unfortunately, "Bearing.stl" is something you can't just download and print. Most of the time it won't work properly…
Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…
Try the new, EXTRA printable version of this model! - https://www.printables.com/model/1289272-extra-printable-print-in-place-6200-ball-bearing - Improved in just about every way and highly recommended over this one! I found myself in…
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
Printed bearing with no balls or assembly, easy to print with no supports. I saw another one like this on Thingiverse but the curve was the other way around which made me feel like it would be less stable. Print Settings Rafts: No…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…
My completely redrawn improved bearings. They were inspired by guppik from Thingiverse. They have improvements for easier printing and a new body structure. Print in place bearing set with bigger bearings:…
Printed on Prusa Mini+ Nozzle 0.4, PLA 0.07 ultradetail mode (0.1-0.12 should works too) Please set the flow for 90% Print it slow! 20-25mm maximum is recommended. Dimensions: 8x22x7mm You like it? You can buy me a coffee 😉…
Additional Hardware None. Great care was taken to make this model fully printable without any fasteners or glue. Print Settings Use your favourite print profile with a 0.4mm nozzle. For all parts, set the ‘ Seam position ’ to ‘Random’, to…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…
NEW VERSION!!: https://www.printables.com/model/803435-new-bearing-less-ps4-controller-mini-wheel Based off of these two models: https://www.thingiverse.com/thing:4498704 https://www.thingiverse.com/thing:3062713 Print screw at 100%…
Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Download different models based on your 3D printer's tolerances. My printer starts spinning 0.2 when all the parts are properly separated. If rings are really stuck, take a small screw driver to separate them carefully. You might need to…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Video of the finished bearing on Instagram: https://www.instagram.com/p/BPA0LYlDdlO/ I wanted to create my own ball bearings for my filament rolls, and have experimented with the details. The outcome is this design, which is ready to…
A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The PET strip can be then used in machine which converts it to filament for 3D printers. This cutter is using sharpened bearings, they works like…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
Based on famous horse statues. Requires tree supports on build plate only. Extra walls due to skinny legs. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A refinement of Emmett Lalish's excellent Gear Bearing -- now with chamfered edges, a smoother outer surface, and dimples for your fingers to hold. Internal geometry and clearances/tolerances remain unchanged. Prints great in PLA, PETG,…
The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…
This is 100% print in place figet spinner. It does not request any equipment or NO - 3D printed parts.
