256 modeli
Leaf Looking Praying Mantis. Play around with the orientation. Its going to be a difficult cleanup no matter what.
Wydruk około 3,78 €–4,63 € nettoWstępna wycena jednego wariantu
Here is a model that allows you to attach the Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud so that it does not slip off the print head
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Update! Added a version 2.1 which attach with a M2 or M3 screw instead of snapp on. Found that the first version easily breaks if you hit the fender with something in combination with vibration from riding. 2.1 version slightly thicker in…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: No support needed Assembly: Gently press it in place and it will “click”. No glue needed. An alternative is to heat up the plastic, without deforming it, to make it a little bit more soft before press it in place.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
The rings have a diameter of 20 mm, 17 mm. (Making more later)
socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
A clamp based on a planetary gear set that is useful as a mini-vise. I increased the overall size and modified the design of the jaws to eliminate the need for supports and increase clamping area.
Ich habe die Original Halterung für den MANTIS 5015 Toolhead angepasst, so dass dieser auch an einem VORON Switchwire verwendet werden kann. Alle benötigten Druckdateien sind entsprechend enthalten. Der Sherpa Mini Extruder kann…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
EDIT 01312023: Fixed and issue with the Rapido Mount. There was no clearance for the BHCS that attach the Tap Front Part to the X Carriage. Thanks Mahican for pointing this out. Also, there's a new mount for the Rapido that has an…
I modified my last Mantis TAP toolhead to now support Simon Vez's Goliath hotend. I'm using CPAP on this but it has the standard mantis fan mounts if you want to use the original Mantis 5015's, but you will need to get the correct ducts…
Introducing the Mantis Mini, this is a fully 3d printable pc case utilising a flex atx psu, low profile gpu and itx motherboard. Measuring 193.5 x 118.5 x 193mm this is a compact case which will fit in most small spaces. This case…
Circuit board cover requires 1 m3 (can use the one that held stock cover on). Just version 1. I plan to remove more material to access connections easier. For use with kobra Mantis quick release fan duct.…
Angular mantis with long faceted arms and triangular geometric body.
Summary Want to build Mantis Claw with only 3D printed parts? This M4-sized pin is designed specifically to help you assemble Mantis Claw quickly by hand without additional sourcing of M4 nuts and bolts. You'll need 4 pins per arm, so for…
Easy to print model Print flexi segment as many as required for the arm The solder iron holder can be attached the base using a nut and bolt(M5 to M7 size) To get a proper fit of the arm to stay in place increase the flow rate to about…
«SCYTHEON MK.IV HYBRID» Cyberpunk mantis blade «Hey, choom! Well, what do you say, time to put a little more "cyber" into this punk? I got just the thing for you — some shiny, brand-new military-grade chrome. Just make sure to upgrade…
I wanted some extra rail adapters for the Mantis X system. They are $10 a piece so why not 3d print some. I looked and could only find ones that replaced the baseplate so I made some. The one that came with mine had a screw hole so I made…
Edit : ajout de la version Xol (Non testé pour le moment) Edit 2 : ajout du fichier Step, je suis en train de tenter une version avec levier mais pour le moment je suis limité dans mes compétences en modélisation Filament Cutter pour…
The mantis clamp is a nice design, clever use of planetary gears. I noticed however that when you add some torque, the gears tilt and jam. Each of the four “planets” have a hole in the center, this opens up the possibility to add axles to…
Quick Note: The 3-layered ‘quick’ and ‘thic’ versions are best. Various sizes included. One of the key elements of the original Falcon Clamp not preserved in the Mantis Clamp is a compound planetary gearbox featuring fused sun gears.…
I know most people want to use the Mantis toolhead to reduce toolhead weight and print faster, that was why I did it. I also really liked the new Voron Design TAP nozzle probe though so I wanted to be able to use my Mantis toolhead with…
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Longer mudguard/fender for Kaabo Mantis 10. Comes in variants: Standard (90 mm) | Wide (110 mm) Front | Back Mudguards are longer than the…
An old design I made in High School! From Thingiverse: This a project that took me over a month and a half to make. It was really fun to make. Category: 3D Printing
Źródło oznaczyło ten model jako treść 18+.
Upgrade your Ender 3 or CR10 with the Mantis Dual 5015 Toolhead , designed for the TZ E3 2.0 hotend and enhanced cooling. This toolhead features dual 5015 blower fans and a 3010 fan, providing exceptional airflow and cooling performance…
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend in combination with VORON TAP. I also modded the faceplate to have one with led mount and one without. The complete carriage fits the new VORON TAP…
Still (mostly) Print-In-Place! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids inside…
This one is a bit bigger making it quite useful for other applications. As a phone holder or in the kitchen to drain a bottle of honey or sauce. Just a handy size. One of the key elements of the original Falcon Clamp not preserved in the…
Filament Cutter for Praying Mantis Printhead Fits to Sherpa Mini, Hextrudort, HGX lite and Orbiter Extruders as well BOM knife no.4: https://a.aliexpress.com/_EJTAJfR M2,5 nut M2,5 x 5 screw M3 nut M3 x 15 screw Sping frim ballpoint pen
Da ich den Mantis mag aber mir die Leds gefehlt haben, musste ich mal etwas zeichnen ;) Ich benutze es in Verbindung mit einem Rapido HF Hotend.
See it in action in the below video! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids…
Dry fire laser training practice target for use with the Laser Academy app. They have a pdf this target available free to print on their website. I wanted something with a little more heft. Made using their pdf and hueforge. I printed…
Just cuted model for better printing and assembling quality. Used middle finger model from autor.
I remodeled the Mantis led to mount on Mantis Toolhead. The original model comes with a Rapido HF. I shortened the model by about 6mm.
Remix of the Mantis toolhead to keep some of the features I liked from the SB
For the Kobra 2 Max I would print it @102% maybe get away with 101%.
Printed on an Ender 3 V3 SE, using PLA, and it worked perfectly. Print Settings: Scale up to your liking Use 100% infill (works best) Model prints fine without skirts or brims Doesn't need supports Resolution 0.2 Notes: Body is solid but…
When I use the MantisX with the Dry Fire Mag I want to leave my light on and train as I carry. I would also like to use all my existing holsters for holster drills. To accomplish this I made a base plate with a built in Picatinny rail to…
I have created a new carriage for the Mantis 5015 printhead to use a Bambu Lab hotend in combination with VORON TAP. I also adjusted the upper fan supports. The complete carriage fits the new VORON TAP without any changes. The step files…
***Please be aware that I did this mod on my Rook 2020 that is using 250mm for the Z Extrusions and Rods. My build volume is 120mm(x), 120mm(y), and 155mm(z). I'm not sure how it affects the Z if the mod is applied on a stock Rook 2020.…
Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…
This is a wip mod, and it's currently used just on my printer. Consider it as a prototype! I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be…
Glock dry fire magazine with Picatinny (mantisX) The slider does not block itself.
Still developing, but so far I've got the push button prototype working great. The one issue that I've seen with the Mantis Claw is that it really wants to hold on, but not let go. This remix modifies the top plate, the top arms, and adds…
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend. I also modded the faceplate to use a 25mm fan or 30mm fan with led mount. There is also an ADXL mount for the faceplate included. You can use the…
Hello, I made bottom plate adapter for CZ magazine ( P10 / P09 ), with picatinny to accept Mantis x system. The main issue I had is that my holster would not accept gun anymore so I had to do it on a magazine. Tried it and it fits…
This is a bottom part of CZ 75 Shadow 1 / 2 magazine with loose picatinny rail to attach the Mantis X device. You don't need to glue the picatinny into any of your magazine bottoms anymore. This works well with the magwell as well. Notice…
Voron CW2 VoronTap compatible Smol Mantis tool head Although it is a cw2 compatible head, but extruder uses orbiter 2.0 Because all my printers use orbiter2.0…👍 Due to the lower motor position of the orbiter extruder, the shape of…
Praying Mantis is a complete Printhead for the following configuration: Sherpa Mini Extruder V6 Volcano Hotend 40mm Hotend Fan 5010 Part Cooling Fan BLtouch Sensor I did this Remix because the original Mantis was a much to complicated…
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend in combination with VORON TAP. I also modded the faceplate to have one with led mount and created an adxl 345 mount for it. The complete carriage fits…
Redesign of It'sMoxie's Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud that fits with DrewDeeDoo's led bracket
Glock magazine plate for use with the Mantis X. Printer: Ender 3 S1 on PEI bed Material: Hatchbox Black PLA Resolution: 0.2 NozzleTemp: 200 Bedtemp:60 Infill: 20%
sorry i forget change the model name in tinkercad
Print and clip on! It's sized to grip the hex dial firmly but not so hard that it's difficult to get on. At least, on my printer. Your mileage may vary. Filament: PLA Layer height: I used 0.20mm , same as the clamp itself. It's probably…
The Mantis Holster is a simple design with the goal of being a versatile, cheap, and low-profile holster system for anything you can stick the lug on. The holster is designed to be mounted on the HRTH mount and can be rotated to 24…
made it myself for art class in tinkercad
Shortened version of the “Anycubic Kobra 2 Neo End Stop Fix", That slides on tight to be able to slide on and off the ”Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud" without losing the X-axis endstop on the Kobra Neo 2. useful if…
Hello, I have a Mantis Insect for you. It is suitable as a decoration for a terrarium, or just for an exhibition. Suitable as an addition to an insect collection. You have several types available. It prints very nicely. Good luck with the…
Use for reload drills with the Mantis Blackbeard system simulating reloading from empty. Start with this PMAG model inserted. When ready, release the magazine and insert the Blackbeard battery magazine, fire two shots.
Peacock mantis shrimp for schoolprojekt. Better to handle than the real one :-)
Adapter from fan 3010 to 4010 for hotend cooling. Faced with frequent traffic jams and overheating of the thermal barrier. Solved the problem by installing a larger fan on the Mantis. For fastening to the mantis, you need to use M3x6…
A pegboard hook with teeth! A mainstay on my printer SD card for when I have just a little bit of filament left on the spool. Uses less than 1m of filament and takes around 18min to print. Also great for showing off different filament…
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…
Praying mantids have a flexible joint between the head and prothorax that enables them to swivel their heads. This ability, along with their rather humanoid faces and long, grasping forelegs, endears them to even the most entomophobic…
UPDATED VERSION for better fit and stronger side supports! MantisX picatinny rail for Alfa Proj revolver This is a remix of thing 3191083 , adapted to fit AlfaProj revolvers , specifically designed for AlfaProj 3561 .357/.38s. But…
Besoin d'ajouter l'écran BTT Knomi, sympa BIGTREETECH KNOMI v1.0 for Voron Stealthburner – Biqu Equipment
Dummy round for Shield, 7 round version, with picatinny rail for Mantis-X dryfire practice.
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
This currently only works for the Rapido UHF but if anyone needs it for another hotend leave a comment and I will try to add that too. I also added the STEP file in case you want to modify it yourself. The Y Offset is 22.6mm. Notes: Use…
This is a small footprint picatinny for small devices like the Mantis X and tactical lights. To meet various needs for mounting, I made 3 designs. No hole… 2. Screw mount hole… 3. Magazine release pin hole… I rounded the ends, to make…
This is a variation of TZ V6 hotend and umbilical CANBUS cable mounts for Smol Mantis Toolhead. I used M2 threaded Insert and M2x6mm BHCS insted of the tapping screw.
Just an update to latest Revision 8 of MrTeliPs awesome mod.
I modeled this to work with my Sig Xten comp 10mm with a Four Brothers holster, but it works with my Gunfighters Kenai holster as well. it should work with other guns as well. I made this since my holsters tensions off of the light and…
Milwaukee battery holder
I have created a new carriage for the Mantis 5015 printhead to use a Bambu Lab hotend. The step files are included in my GitHub: https://github.com/PrintStructor/MantisUsermods/tree/main/Usermods/PrintStructor
if you need any other combination you can go here to the original one. https://mods.vorondesign.com/details/X1OtCg3ZJQBmZ7LEU7LqQ BLtouch offset: x_offset: 26.6 y_offset: 9
Printing Information: Use tree support to support the voronoi structure. Use a brim, since its contact surface with the printbed isn't all that much.
Specs Sherpa Mini Dragon HF 2x 5015 Fans 1x 3010 Fan EBB36 Bunch of m3 inserts
For the Springfield Armory .40 magazine baseplate adapter for MantisX training system. Added standard baseplate as well. Edit: Added thin version Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Mantis repo "Mantis" is 1,2" printable freestyle/racing 1S tinywhoop watch out! I'm updating this project often here, for best and actual files please visit my repo. There you can find most actual description and files:…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Fomantis, Tabletop DnD miniature 20 mm small base which can be used for DnD and other Tabletops.
This bracket will save your precious space on your e-scooter handlebars. You will need 4xM4 screws and nuts . I have used a little piece of rubber (tourniquet from first aid kit) so it does not travel up and down on the stem. Designed for…
Toolhead that can use Mellow NF Crazy/Volcano (mosquito) on Mantis hotend with 3010 fans Mantis hotend : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015
The Mantis Dual 5015 is a fantastic toolhead with very low weight and insanely powerful part cooling. I made a front plate for it that clamps onto the hotend cooling fan from above and below. This neatly covers its screws, giving the…
Remixed Mantis XOL 2 Rapido Hotend mount to fit Dragon Hotend. STL's in correct orientation, the hotend mount needs minimal supports. Made a version with Built in Supports as well, but it's still untested. Uses most of the same mounting…
Mantis Falls is a great social deduction game, which can be both, competitive or collaborative. Deducing what it is during the game is a key part of what makes Mantis Falls fun. There are already a couple of organizers I found, however,…
I made this mount because the closest i could find was this: https://www.thingiverse.com/thing:5841443 However i still needed a 3rd SMA mount for my Bardpole antenna. The GPS this fits is a Matek M10Q-5883. Its designed so you can…
The mantis toolhead is a great project made by Long that I would highly recommend to anyone looking for a lightweight solution to their toolhead troubles. It pairs really nicely with extruders like the Sherpa Mini or Thumper (the one I…
Voron Mantis Goliath Water and a bit more stiff because of the heavy hotend
Voron Mantis with Knomi Small cover for Voron Mantis head with Knomi incorporation. These designs meet customer expectations, and probably not their mountability. It is therefore necessary to modify them to meet your expectations. -…
![DNL Kaabo Mantis 10 Mudguard [std/wide, front/back]](https://media.printables.com/media/prints/306890/images/2689878_5597f1d7-da13-4fc0-90cf-2c543353b984/img_3648.jpg)
