Wyniki wyszukiwania: rapido

Sortowanie

227 modeli

P
PrintablesBearVision3D

Stealthburner rapido 2 uhf plus with cpap

This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired

Pobrania
77
Polubienia
15
Ocena
0
P
PrintablesMatthew Schultz

MJS.ART Koh-i-Noor Rapidograph Reservoir Funnel

I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesBasementLAB

Wall Mount Quick fastening system - Sistema universale di Fissaggio Rapido

Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…

Pobrania
6402
Polubienia
3896
Ocena
5
P
PrintablesCharlotteBeLike

Phaetus Rapido UHF CAD Model

I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…

Pobrania
1397
Polubienia
43
Ocena
5
P
PrintablesBaze

Rapido v2 Plus (UHF) StealthBurner Print Head

Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.

Pobrania
804
Polubienia
63
Ocena
5
P
PrintablesTX_Ryan

Stealthburner Phaetus Rapido UHF

Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…

Pobrania
718
Polubienia
89
Ocena
5
P

Rapido 2 UHF Stealthburner Kit- LW Toolhead

Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…

Pobrania
666
Polubienia
61
Ocena
5
P
PrintablesTX_Ryan

Wishbone Voron Mantis CPAP Part Cooler Duct Rapido UHF

I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…

Pobrania
594
Polubienia
114
Ocena
5
P
PrintablesWenen

Voron Stealthburner Rapido 2 UHF V2

I made a modification for the Rapido 2 UHF hotend that works with the Stealthburner front hood. This way, you don’t need to print a new front —you can use your existing one. I created an extended duct to improve airflow under the nozzle.…

Pobrania
543
Polubienia
40
Ocena
5
P
Printables3DPrintDemon

Yavoth Toolhead Demon Remix For Rapido 2 UHF, Orbiter 2, BTT Eddy, EBB36, Voron, SV08

Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…

Pobrania
537
Polubienia
227
Ocena
5
P
Printablesbillyd

Filament Cutter for EVA3, Orbiter, Rapido

***Update: Aug 18, 2025*** Added left side cutter. This was actually the original way I did it and was unpopular in the discord during development due to widespread superpinda use at the time. Obviously with the cutter on the left, the…

Pobrania
517
Polubienia
102
Ocena
5
P
PrintablesBaze

Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Hex Version.

Pobrania
460
Polubienia
62
Ocena
5
P
PrintablesAldoale

Vz-Bot Printhead Rapido Heatsink Duct 3010 Fan

no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…

Pobrania
448
Polubienia
45
Ocena
5

VORON Stealthburner with CPAP, Toolhead PCB and Rapido UHF

This is a Voron Stealthburner for a Rapido UHF with A CPAP and a toolhead PCB. Please note that I didn't print it myself but did only the CAD work. If you encounter problems or see ways to improve the construction, please let me know. You…

Pobrania
376
Polubienia
84
Ocena
5
P
PrintablesBasementLAB

2020 T Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020

2020 T-Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Suitable for: Other sizes: Resize to adjust dimensions All our designs are free to download and use—because sharing…

Pobrania
336
Polubienia
51
Ocena
5
P
Printablesjagerman

Voron 0.2 Rapido (1 or 2) HF hotend miniSB mount

When building my Voron 0.2 with a Rapido, I came across the oft-referenced Rapido mount by Maverick (https://mods.vorondesign.com/detail/dWZjGJ83RbTpRTdYYRwng), but I was not satisfied with it because: it requires printing a whole new…

Pobrania
335
Polubienia
40
Ocena
5
P
PrintablesIanryeng

ERCF v2 Filament Cutter - Stealthburner Rapido V2 Hotend

Print as you would the standard Voron parts, this version should be compatible with the Rapido V2 based on moggieuk's ERF Filament Cutter release (2024.01 version).

Pobrania
335
Polubienia
35
Ocena
0
P
Printablesgrafit.xyz

XOL Rapido v2 HF + 3010 FAN

The original XOL is designed to work with Delta's 2510 fan. It is a good fan, but it is difficult to obtain on the European market, or the delivery is several times higher than the cost of the fan. My project adapts this great tool head…

Pobrania
324
Polubienia
50
Ocena
0
P
PrintablesYathani

Rapido UHF EVA 3.0

modified Rapido mount for EVA 3 by removing the overhang

Pobrania
313
Polubienia
37
Ocena
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Pobrania
312
Polubienia
36
Ocena
0
P
PrintablesRajonex

Cobra Toolhead - Linear Rails Direct Drive Mount for Orbiter 2.0 & Rapido Hotend HF (Ender 3, Ender 5, Aquilla, Neptune)

Toolhead to be mounted on every 3D printer with Linear Rails MGN12H mounted on side (not on top of aluminium extrusion). Remix is adapted to use with Orbiter v2.0 extruder and Rapido HF hotend. On images toolhead mounted on Biqu B1 (if…

Pobrania
304
Polubienia
60
Ocena
0
P
PrintablesBasementLAB

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa

Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…

Pobrania
303
Polubienia
98
Ocena
0
P
PrintablesBasementLAB

2020 Twist In Cable Clamp (two Sizes) T-Slot Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020

2020 Twist In Cable Clamp Two Sizes for T-Slot Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Two Sizes - Due Misure: 14.5x20mm 20x20mm Suitable for: Other size: Resize to adjust dimension All our designs…

Pobrania
294
Polubienia
59
Ocena
0
P
PrintablesChris Nolan

Stealthburner cowling for Knomi 2 with Rapido UHF

The Knomi 2 Stealthburner cowling, but for use with Rapido UHF. Prints with Voron slicer settings.

Pobrania
291
Polubienia
22
Ocena
3,67
P
PrintablesBaze

Hex Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Plain Version.

Pobrania
286
Polubienia
38
Ocena
5
P
PrintablesManufactorum 4K

40mm fan and 8mm probe holder for VZbot ratrig printhead and extruder with Rapido

This is a mount for using a 40mm fan in combination with the CNC machines VZ-Bot ratrig printhead. It's specific for using the Vz-Hextrudort and Rapido hotend. It is a WIP as I am still building the printead. STEP file is included for…

Pobrania
229
Polubienia
31
Ocena
0
P
PrintablesIvan Klas

Stealthburner KNOMI HEX UHF Rapido Face

Mod for Rapido UHF with Knomi and HEX design face. No need of MMU, just 2 colour swaps.

Pobrania
223
Polubienia
29
Ocena
0
P
PrintablesDan90

Xol2 Rapido HF + CPAP

First of all, thanks to everyone from Armchair Engineering and to tktktktk VT.1020 from Voron Discord for designing the duct. It is my iteration of the Xol2 Rapido HF + CPAP. The design has been tested and works pretty well. Please let me…

Pobrania
221
Polubienia
42
Ocena
5
P
PrintablesJohn Chatham

Stealthburner CPAP / Knomi 2 / SB2209 or SB2240 / 3DO Nozzle Cam / Rapido UHF

Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…

Pobrania
212
Polubienia
41
Ocena
0
P
PrintablesTijmenbo

stealthburner Rapido v2 UHF ERCF Filament cutter

stealth burner Rapido v2 UHF ERCF Filament cutter with longer ducts

Pobrania
196
Polubienia
31
Ocena
0
P
Printables93djen

Dual 5015 Horns for Volcomosq or Rapido

Dual 5015 Horns for Volcomosq or Rapido. Can be used with the EVA wide bottom carriage and the dual 5015 mod. There is a version for hex nuts and one for melt inserts. You can decide which one you want. Works for Vulcano hotend, Volcomosq…

Pobrania
193
Polubienia
17
Ocena
0
P
PrintablesChris White

Beer Belly Print Head for Qidi X-Max 3 / Orbiter 2 / Rapido K500 (UPDATED to v0.7 - 18 May 2025)

*** WARNING - This model is complicated and requires soldering, lots of melt-in threaded inserts, and much more. It risks bricking your printer if you make a mistake. It is also a Beta release, and as a result, is under-developed and…

Pobrania
189
Polubienia
42
Ocena
5
P
PrintablesRick269

Prusa MK3S+ upgraded fan duct and mounts for Phaetus Rapido hotend

The improved fan duct is a remix of a very good upgraded fan duct from KalleKnall. https://www.printables.com/model/39679-prusa-mk3s-and-mk3s-fan-duct-with-pinda-support. I've modified it so it will fit as a direct replacement for the…

Pobrania
186
Polubienia
24
Ocena
0
P
PrintablesMike Gin

Voron Mantis toolhead, CPAP, Rapido HF, LGX Lite with ARGB and ADXL

Remix of the Mantis toolhead to keep some of the features I liked from the SB

Pobrania
185
Polubienia
36
Ocena
0
P
PrintablesBasementLAB

2020 HEX T-slot Twist-in Cable Manager - Guida Cavi con aggancio rapido

2020 HEX T-slot twist-in Cable Manager - Guida Cavi con aggancio rapido Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…

Pobrania
185
Polubienia
36
Ocena
0
P
PrintablesAKinferno

Ender 5 Pro Lightweight DD Overhaul - Phaetus Rapido & Orbiter 2 (Remix)

Would like to thank Okef256 for the original model. It doesn't seem to get much attention, but it is great. Modifications: Modified mount to attach to Ender 5 mount plate instead of linear rails. Added hex holes to allow install with 3mm…

Pobrania
170
Polubienia
30
Ocena
0
P
PrintablesMatvei

Mantis toolhead Dragon/Rapido UHF neopixel ducts

Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…

Pobrania
166
Polubienia
31
Ocena
0
P
PrintablesBaze

Stealthburner + KNOMI v2 + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI v2 Stealthburner face plate. Step file has 18 non-manifold edges, but prints ok.

Pobrania
164
Polubienia
13
Ocena
0
P
PrintablesWingmanImd

Orbiter 2 adapter for Mantis + Rapido HF/UHF

This is a wip mod, and it's currently used just on my printer. Consider it as a prototype! I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be…

Pobrania
161
Polubienia
12
Ocena
5
P
PrintablesR3men

Voron Stealthburner Rapido UHF

It is recommended to use it with the new super powerful D3vil Design Typhoon 5015 fan : https://www.aliexpress.com/item/3256808498095211.html

Pobrania
153
Polubienia
22
Ocena
0
P
Printablesbillyd

EVA MOD FOR ORBITER2 RAPIDO BEACON EBB42 TOOLBOARD AND 4028 FAN

***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…

Pobrania
143
Polubienia
17
Ocena
5
P
PrintablesGabor

VZ-printhead adapted for VCore3 + stock MGN12C + Orbiter 2.0 + Rapido UHF + CPAP

Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail

Pobrania
143
Polubienia
17
Ocena
0
P
Printablespmate

Electrolux ergorapido adapter round

Print with supports 0.2mm layer height ist fine

Pobrania
142
Polubienia
13
Ocena
5
P
PrintablesAB Laser CO2

SOVOL SV08 hotend Rapido HF support by AB RIB

The model should be printed with supports BEFORE MOUNTING TO THE ADAPTER!!! :) one of the pictures shows how the cable should be positioned relative to the screw (marked in the picture) you should unscrew the hotend, position the cable…

Pobrania
142
Polubienia
32
Ocena
5
P
PrintablesLaChriz

Fanduct Rapido UHF EVA 2.3 System / VzBot

Passend zum EVA-2.3 System Hier wurde der Luftkanal entsprechend angepasst, so dass das Bauteil nun richtig gekühlt wird.

Pobrania
136
Polubienia
11
Ocena
0
P
Printableslakai

Cartographer Probe mount for Rapido UHF VORON ChaoticLabs TAP XOL2 Toolhead

Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead

Pobrania
133
Polubienia
16
Ocena
0
P
PrintablesBlackbox

VZ-Hotend adapter Rapido 4010 (Beta)

Untested. Join me on the VZBOT discord.

Pobrania
129
Polubienia
12
Ocena
0
P
Printablesmeierseppl

Rapido Gurtschnalle

Einfach eine Gurtschnalle zum Rangieren auf dem Campingplatz ohne Gurtwarnergepiepst im Rapido Design Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 200 Infill: 35 Filament:…

Pobrania
129
Polubienia
0
Ocena
0
P
Printablesguru_florida

EVA3 Bottom Horns - Rapido (10mm)

I found the EVA3 posted version still a bit too high and didn't properly cool. I used the OnShape site and opened the Horns part and modified the config to drop the height from 8mm to 10mm.

Pobrania
128
Polubienia
14
Ocena
5
P
PrintablesAB Laser CO2

SOVOL SV08 Toolhead RAPIDO UHF AB RIB

sovol sv 08 toolhead Version UHF for RAPIDO

Pobrania
125
Polubienia
14
Ocena
0
P
Printablesjphill

Hex Stealthburner + Knomi 2 + 3DO Nozzle Cam + Rapido UHF

Joined Panzarkatten's HEX Remix 3DO UHF with Big Tree Tech's Knomi 2 .

Pobrania
124
Polubienia
10
Ocena
0
P
PrintablesTheFuzzyGiggler

Rapido UHF Improved Cooling - Stock Stealthburner Face

This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF. The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air…

Pobrania
121
Polubienia
29
Ocena
0
P
PrintablesJayNozzle

BlTouch Mount for EVA 2.4.2 with Volcano / Rapido Hotend

This is a reinforced mount for a bltouch on a eva 2.4.2 carriage wit three mounting holes, so It is easy to switch between a volcano nozzle and a normal nozzle.

Pobrania
119
Polubienia
3
Ocena
5
P
PrintablesRomeoDesigns

Phaetus Rapido Mount for Creality K1

Title says it all. A tool steel nozzle stripped the threads of my CHCB-OT hotend, and I really didn't like the original Creality hotend. Relocates Nozzle MCU Board and heat break cooling fan. Currently working on a new…

Pobrania
118
Polubienia
36
Ocena
0
P
PrintablesRaymond

Voron 2.4 Exhaust Cover For Rapido Adapter

This is a remix from Crypton Von Arcanum

Pobrania
112
Polubienia
17
Ocena
0
P
Printableskiwi0401

Mantis-Style Phaetus APUS + Rapido UHF toolhead for Voron 2.4 - Carbon Fiber Gantry w/ toolhead PCB or STOCK

The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…

Pobrania
103
Polubienia
32
Ocena
0
P
PrintablesBaptiste31

VORON SB UHF Cpap Stripes faces Rapido-v2

SB-UHF (long version!) I share my toolhead because I was asked for it, I specify that I did not create the models and I do not wish to appropriate their design, it is an assembly of parts that I researched and that I have modified to…

Pobrania
103
Polubienia
18
Ocena
0
P
PrintablesJaydee Sale

Ender 7 - Rapido mount - Stock

3d model of a mount i designed for the ender 7, fits the stock shroud and mounts a Rapido HF hotend. Aligns with the stock hotend 100%, and sits about 1 mm lower than original nozzle so adjust z offset accordingly. Attaching the fusion…

Pobrania
102
Polubienia
17
Ocena
0
P
Printableshuskyte

EVA 3 - Monobloc (Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless floating gantry)

Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from…

Pobrania
102
Polubienia
18
Ocena
3
P
PrintablesWingmanImd

Voron Mantis Beacon - Rapido UHF

This currently only works for the Rapido UHF but if anyone needs it for another hotend leave a comment and I will try to add that too. I also added the STEP file in case you want to modify it yourself. The Y Offset is 22.6mm. Notes: Use…

Pobrania
102
Polubienia
10
Ocena
0
P
PrintablesRick269

Delta-P X2 duct and fan mount for Phaetus Rapido hotend

Modified so the part cooling duct and extruder cover/fan mount is 8.3mm lower to suit the standard Phaetus Rapido and volcano hotends. Only the version without LED mount provisions is provided. EDIT: By request, have uploaded a 3mm version.

Pobrania
99
Polubienia
11
Ocena
5
P
PrintablesAB Laser CO2

SOVOL SV08 Toolhead RAPIDO HF AB RIB

Tollhead Rapido HF AB RIB update toolhead for klicky Nadir

Pobrania
99
Polubienia
15
Ocena
0
P
PrintablesIsawen

XOL BTT EDDY Mount Compatible With Stock XY Endstops For Rapido UHF

This is a modified mount designed to let you use the stock Voron 2.4 XY endstop locations with the XOL toolhead. It’s based on the BTT Eddy UHF sensor mount for XOL, but enlarged to ensure proper alignment and contact with the stock X…

Pobrania
98
Polubienia
8
Ocena
0
P
PrintablesRomeoDesigns

K1 With Rapido Hotend Fan Shroud

Fan shroud using the stock 4020 blower fan to provide part cooling when using a Phaetus Rapido hotend with my mount. Obviously draws inspiration from the Voron Stealthburner. No X or Y travel is lost with this toolhead. Uses all stock…

Pobrania
94
Polubienia
25
Ocena
0
P
Printablesnot michael

Phaetus Rapido 40mm fan duct

A fan duct for Phaetus Rapido which utilizes a 40mm fan. Has a locating lip near the bottom to prevent upward movement due to the heat sink's conical shape. Category: 3D Printer Parts

Pobrania
94
Polubienia
10
Ocena
5

Voron 2.4 Rapido Exhaust Cover

Replaces the pneumatic hose fitting with leftover part from Rapido (the top of the heatsink)

Pobrania
91
Polubienia
30
Ocena
2
P
PrintablesfreakyDude

Voron Stealthburner Rapido HF - Maximized Airflow Mod

After many hours of analysis, rebuilding, simulation, and testing, my modified StealthBurner for the Rapido 2 High Flow Hotend is finally here! I modified the air ducts, the mount for the Rapido HF hotend, and the Stealthburner front so…

Pobrania
89
Polubienia
21
Ocena
0
P
Printablesdriftrotor

StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko

StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko This Fancy Kumiko SB Cowling was a special ask from a fellow Voron member and took quite a few hours to get the Kumiko pattern to follow the contours of the SB. But the hard work…

Pobrania
89
Polubienia
14
Ocena
0
P

Stealthburner LGX lite Rapido UHF Mellow SB2040

Since I'm running Rapido UHF, I remixed the original part of MLoeko The UHF part is based on the work of bythorsthunder: https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf

Pobrania
87
Polubienia
11
Ocena
0
P
Printablesdannymcgee

Rapido HF Silicone Sock Remover Tool

I swap nozzles frequently on my Voron printer with a Stealthburner + Rapido toolhead. But to get a good purchase on the nozzle with a 7mm socket, the silicone sock needs to come off, which is really difficult to do without partially…

Pobrania
84
Polubienia
13
Ocena
5
P
PrintablesBackYarder

Stealthburner MGN12 X Carriage Rapido UHF lowered probe

Stealthburner x carraige with lowered probe suit Rapido UHF and Omron or Eddy probe. Larger hole for x stop wiring/plug.

Pobrania
83
Polubienia
3
Ocena
0
P
PrintableszGHLooL

klicky Stealthburner longer mount for RapidoUHF

i have a klickyNG probe and ,recently installed Rapido UHF hot end which has a longer nozzle than most hotend out there. use voron recommended specs to print the mount. ABS+ I recommended

Pobrania
78
Polubienia
8
Ocena
0
P
PrintablesAxhor

3D Print Head for Bear MK3S : Orbiter V2 + Hotend Rapido

EN: Support us, we need a lot of caffeine to continue spending hours of research and development and share our designs with you. https://www.buymeacoffee.com/axhor STL files are now available for the new 3D print head designed for the…

Pobrania
76
Polubienia
24
Ocena
0
P
PrintablesRahmah12

XOL Rapido Toolhead CPAP

I was a huge fan of @TX_Ryan 's Wishbone cooling duct for the Mantis toolhead but wanted to be able to have the freedom to use something that isn't a Sherpa. Took @SmolzillaMake_226232 Adapter and made it fit the newest toolhead revision…

Pobrania
76
Polubienia
15
Ocena
0

Test super Rapido de Retracciones CHZTec (Super Rapid Test of Retractions)

Test Super rápido para gastar poco material y tiempo Super fast test to spend little material and time

Pobrania
75
Polubienia
1
Ocena
0
P
Printablesjornamon

EVA3 SuperPinda mount for Rapido SUHF configuration

When using a Mellow V6 Pro adapter ( https://www.aliexpress.us/item/3256804525082538.html ), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the…

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesSmolboi

Micro-AS Rapido hf

This is an UNTESTED toolhead for the Voron V0.1. I don't currently have the parts to build this toolhead and I don't have plans to ever try it. I just got a bit bored. I'm assuming that a fan saver is required due to how close the heater…

Pobrania
72
Polubienia
18
Ocena
0
P
PrintablesLAYDN

Ugly Ender 3 ToolHead - Support for Rapido UHF Hotend (MGN12C)

Modified some files to accomodate the Phaetus Rapido UHF Hotend.

Pobrania
72
Polubienia
11
Ocena
0

Ender 3 Rapido UHF Mount & Duct - Orbiter 2.0, Beacon D Probe

I saw the STEP files and made them to be 3D-printed with PETG.

Pobrania
71
Polubienia
15
Ocena
5
P
PrintablesMichele Bucovaz

Gancio rapido - zaino Invicta vintage

Gancio rapido - zaino Invicta vintage - Backpack hook invicta.

Pobrania
70
Polubienia
10
Ocena
0
P
PrintablesMr Meatbeard

EVA VZ Hybrid printhead - specific for Ender 6, Rapido and CPAP

UPDATE 02/10/23: Included X/Y endstop piece for Widowmaker G1. UPDATE 19/09/23: Included new files for mounting a Goliath hotend along with the goliath duct and spacers. Also included a new BLTouch mount (it is too short by design, space…

Pobrania
68
Polubienia
13
Ocena
5
P
Printablesmbuaux

AEG 2in1 Ergorapido Universal Adapter

AEG 2in1 Ergorapido Universal Adapter since a lot of models are available for a round connector

Pobrania
67
Polubienia
3
Ocena
0
P
PrintablesOriginate 3d

Voron V0.1 Phaetus Rapido Mini Afterburner Multibody

I do not recommend that you use a Rapido . It's a great hotend and has performed well, but it's just better to stay in the developed ecosystem and save yourself the headaches of a custom job. I like what I have but I wouldn't do it again.…

Pobrania
67
Polubienia
11
Ocena
5
P
PrintablesClock_Watchdog

BLV Cube Carriage (EVA Based) for Volcano, Rapido (not UHF) or Similar

This mod is based on EVA 2.4, it uses the rear from EVA but has the front and the other parts heavly reworked. I made this mod to have a sturdy hotend lock, without hard overhangs, becouse i needed to print in PA-CF. You will need 4 x M3…

Pobrania
66
Polubienia
9
Ocena
5
P
Printablesbonder

Electrolux Ergorapido Accessories

Print Instructions infill %100 3 Walls supports required Please look the photos.

Pobrania
66
Polubienia
7
Ocena
0
P
PrintablesNozzle Wizard

MGN12 X-Carriage for Rapido PLUS 2 UHF EDDY / PROBE Lowering Mount

Lowers the probe on the MGN12 x-carriage to suit the Rapido Plus 2 UHF length. The lower clamping nut and bolt have had to be relocated and you will need a shorter self tapping screw on one of the endstop switches. Apart from that, this…

Pobrania
65
Polubienia
8
Ocena
5
P

Rapido hotend LGX Mod

The Bondtech LGX extruder is not compatible with the Rapido hotend. I had to create a mod to be able to attach it to the

Pobrania
64
Polubienia
15
Ocena
0
P
PrintablesDave

XOL Rapido2HF Vindr Neopixels 3010 Fan

Added Neopixels in place of the Sequin part lights. Moved Neopixels closer to the front to better illuminate the nozzle and parts. Extended the skirt in front to hide the LEDs. I have a bunch of Neopixels on hand and they are much…

Pobrania
61
Polubienia
8
Ocena
5
P
Printablesdvdkon

Vacuum cleaner adapter: Electrolux Ergorapido to old Dyson

This is a simple adapter for using old Dyson vacuum cleaner heads (~32mm outer diameter) with an Electrolux Ergorapido. I printed mine from PETG with the round part at the bottom, but other materials and the opposite orientation should…

Pobrania
61
Polubienia
6
Ocena
0
P
PrintablesAsono

Nozzle ADXL for Rapido UHF

the original didn't have room for the UHF adaptor. I modified the step file to mimic the UFH adaptor

Pobrania
60
Polubienia
7
Ocena
5
P
PrintablesAnkit Rawat

Rapido Ace Stealth burner Mounts

This is a modified version of the original StealthBurner Rapido UHF mount, updated to fit the TriangleLab Rapido ACE UHF hotend. The mounting pattern and general fit are the same as the standard Rapido UHF mount, but the geometry has been…

Pobrania
58
Polubienia
6
Ocena
0
P
PrintablesChodec

VzPrintHead TentaCool duct for Rapido&Euclid&CPAP

Credits: MirageC ( https://github.com/MirageC79 ) and Vez3D ( https://github.com/VzBoT3D ) Note: STEP file of the Tentacool works in Onshape. It doesn't work in Fusion360, model is damaged (incompatibility?). Tentacool source file link:…

Pobrania
58
Polubienia
10
Ocena
0
P
PrintablesDanyial

Xol Toolhead Faceplate 3do Nozzle Cam Rapido HF

The Xol Toolhead Faceplate is designed to support the 3do Nozzle Camera and the Rapido HF Hotend. It provides a stable m

Pobrania
57
Polubienia
7
Ocena
0
P
Printablesmicheldb14

AM8 BLV with EVA 3.0 printhead (Orbiter 2.0 & Rapido HF)

I really liked the design of the EVA 3.0 printhead and I have modified it a little to make it work on the AM8 BLV. The parts are I have changed are the parts for the Orbiter 2.0 extruder and Pheatus Rapido HF hotend. Website of the AM8…

Pobrania
56
Polubienia
8
Ocena
0
P
PrintablesFabs

Rapido Caravan Grip

Let me introduce you to my first published model. This is a grip for Rapido Caravanes folding caravans. The old ones were rotten so I recreated them and printed them new. I printed them with 36 massive bottom layers, so the part where you…

Pobrania
56
Polubienia
8
Ocena
0
P
Printableswhoknows234

Ender 5 s1 rapido mount

For use with the rapido hotend and Ender 5 s1. Requires the below mount clamp. At some point I may make a clamp where the stock fan can be screwed into two holes. https://www.klemco.net/klemco-mount-clamp/

Pobrania
54
Polubienia
10
Ocena
0
P
PrintablesApollo1298

A4T Cowling Variations for BDpressure (Dragon, Dragon UHF, Rapido UHF, TZ V6 2.0)

the BD Pressure sensor is a strain guage that sits between the hotend and the hotend mount. This allows the sensor to measure extruder pressure. By measuring this you can automatically calibrate PA live. The sensor requires 6mm of…

Pobrania
53
Polubienia
16
Ocena
0
P
Printablesmactiti

porte manteau rapido camping-car

remplace Le support cassé Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: au choix pla au choix Notes: ok Category: Vehicles

Pobrania
53
Polubienia
14
Ocena
0