226 modeli
I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…
Wydruk około 48,28 €–59,01 € nettoWstępna wycena jednego wariantu
Simple model to hold 2 decks of playing card whose original box is missing. Lid snaps in place and has a clover (clubs) decoration. Internal height is 33 mm. There is a remix for single deck:…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
Wydruk około 6,37 €–7,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…
This is a Fusion template for creating stacked gridfinity grids. These grids are symmetrical top-to-bottom, so they stack easily. Use Modify→Change Parameters to change the size of the grid and the number to stack. Grids are stacked with…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
I created the stacked version of the HSW for print with less downtime. The total print length is 9,5h on Bambulab X1E with AMS on normal speed settings. DON'T change the settings. Use Support for PLA filament or water soluble filament for…
Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…
For FDM printers Supports: Yes (organic) Raft: Doesn't matter Nozzle: 0.4 Layer: 0.2 Infill: 15-20%
I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.
You can find this print from a creator on thingaverse. I only modified it a little to be larger and function better with a couple more pens in the holder. I recommend printing with Black PLA at 15-20% infill. Maintain all the same…
Stacked Gridfinity Grids with modeled support
Marker tower designed for 6mm markers with 10mm outer diameter. I am using these magnets https://www.supermagnete.de/eng/magnet-systems-threaded-studs/neodymium-magnet-system-22mm-black-rubber-coated-with-threaded-stud_GTNG-22 The hole in…
🧱 Stacked Tile Remix - Manual Stacking for Efficient Printing This is a remix of the tile system originally developed by David D , with tile generation by BlackjackDuck - huge thanks to both! I've added a manual stacking solution to help…
Simple reimagining of the Pendiente Palma Earring design. I took the basic shape and stacked it. Looks great with tri-colored filament (Copper-Gold-Blue)! 2 earring designs are meant to be printed per earring and glued back to back (base…
Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…
2 different textured rock piles with cutout entrances for fish/shrimp to hide in. Designed with thin walls to keep printing costs down. scaling down shouldn't exceed 50% or the walls will become very thin. Both options are printable…
Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…
This 3D Christmas tree goes beyond decoration—it's a versatile canvas! Print it in 'vase mode' for a sleek look or choose 'stacked assembly,' enabling vibrant colors for each block. With options for contemporary or traditional styles,…
This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…
Big thanks goes to Josef Průša and the PRUSA company for this design! Attension: Read the instructions before bring it in circulation there are some important things you have to notice. Use the following link to get those:…
Stacked Bat Lantern LED Tealight or Votive Candle Holder Halloween Decoration This is a 100x60x60mm Halloween LED tealight or votive lantern. The thin print settings make this lantern glow with light from the flicker of LED candles. Easy…
Great for most NETGEAR switches, 5 port, 8 port and 16 port… Not tried anything bigger. Probably works with other brands too.
We have printer that prints disolvable support material. This allows us to do some interesting stacking of builds to get more product out of a printer volume. Downside, the print takes about 18 to 24 hours to print a stack of 6. I can get…
A modifed version of the stacked pipes that has lattice on the sides to grow java moss.
These simple earrings are made up of stacked hearts. Printing is pretty normal, you just change colors between layers to get the hearts in different colors. The earrings are mirror images of each other. Designed using Tinkercad. Printed…
The MMS Stacked AR-15 Double Magpouch! Is the single magpouch just not enough, or you want to carry more mags on your belt? Here you are! Holds 2 AR-15 magazines in one module! Use with the MMS Heavy Belt Module and other MMS mounts for…
Stacked Pumpkin Lantern LED Tealight or Votive Candle Holder Halloween Decoration This is a 100x60x60mm Halloween LED tealight or votive lantern. The thin print settings make this lantern glow with light from the flicker of LED candles.…
Mount 3 Similar Mobile Radios like the QYT 980Plus, BTech 50x2, and Others with mounting holes 50mm apart, on center. You can find the radio used here, https://a.co/d/e06hdWa Print 2 pieces. I used 25% infill with 5 Walls. PETG…
A typical 3D printed planetary herringbone gear fidget toy, but with the ring gear, carrier and sun gear extruded to three stacked knobs. I saw something similar to this in a video online, but couldn't find the source model. Bored and in…
This bracket is specifically designed for the usage with an HP EliteBook 840 G7 and a a Portable 14" Arzopa 1080p monitor. The thickness allowance for the monitor is 7.8mm and the portable monitor is 10mm. Other laptops and monitors may…
Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…
Made with Onshape. Print in place. Satisfying.
This machine start g-code moves the priming line on top of the load line. This makes it easier to remove as it will be thicker and removes the back right corner line. 6-13-23 - Now incorporates lines to tie the flow calibration lines…
A simple bracket for holding a laptop against a wall that enables the screen to be opened. I use this as a third monitor in a stacked setup, mainly for video calls. Print with the long side against the bed. No support needed but I did…
Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…
Our state has approved RC1 so we can't print the new version. Here are files with 0.2mm & 0.3mm spacing, with or without built in support, and with or without a tab on the front to help with warping. The Prusa label has also been removed…
I redesigned the original lack enclosure design so it would be more robust and sturdy in order to stack 2 enclosures with 1 bottom shelf. I also created a spool holder inside of the enclosure that works with the removable injection molded…
This allows stacking 2 HDD's with one of the Fractal North HDD cages. Probably works for other HDD cages as well. The print is intended to printed 2 times. One in the current orientation and one mirrored. I forgot to do that in my final…
This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers: https://www.rockler.com/igaging-3-piece-engineers-square-set A left and right version are provided as…
Added a slot w/matching tab to bce.gatien's vertical wind spinner, holds the blades @ 10 degr. rotation one to the next
Stackable screw sorter/storage box. The Small cup goes on the bottom then smallest to biggest screens bottom to top, Fill the biggest screen ( top one) place lid and shake to sort by screw size, It also acts as a storage bin as well once…
This model was remixed from ScottMuc's Anbernic RG405M Shoulder Buttons , scaled and edited to fit the RG505, although its recommended to print with SLA printers, I printed mine with FDM (Kingroon KP3S) and there were zero issues with…
This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm Print instructions This is for PETG. All print settings are included in the 3mf file. You need…
We are not using the bottom reinforcements. This Gcode starts with the Prusa provided Gcode for the Protective Face Shield 3.2, with the bottom reinforcements removed. Version 3.2 is stronger, no further changes are needed. See the…
I upgraded my homelab with a third hard drive and needed a new holder for it. The previous was from this page. I dried my TPU and quickly designed this holder. I know it is not ideal as i should have designed a PETG frame with TPU inserts…
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…
I set this interesting model in the stack and made a few corrections acc. to Prusa stack: models are slightly more apart from each other to separate them without surprises supports go away easier a few extra places for adhesion Print 8…
Made this so that i could organize my spray cans. Done in Blender. No supports needed. Printed in PETG but you should be able to print in PLA too. I don't have any particular settings. Just generic settings will be fine. Category: Tool…
This modular organizer is designed to adapt to your needs. Whether you're organizing your desk, workshop, bathroom, craft space, or kitchen, you can customize the number of tiers or scale model however you'd like to create the perfect…
Designed from scratch to hold a pair of Nespresso coffee pod tubes. The goal was to take up less countertop space than the single stacked designs. There are spaces for the labels cut from the box lid to be placed. Designed not to latch…
This is a pen and business-card holder designed to look like a stack of three tires with a fourth leaned against it. I printed mine using the following print settings: 0.08mm layer height 5 walls 15% infill No supports
Features: Three stacked tires with realistic tread. Functional design – hollow interior for pens, pencils, or small tools. Compact size – fits easily on any desk. Easy print – no supports needed. Print Settings: Material: PLA / PETG Layer…
This is a model I made that is used as a pencil/pen holder. Print settings: layer height 0.2 infill 7% - 15% whatever you prefer supports ON Recommended support settings I used for easy removal: line width for supports: 0.25mm type: tree…
Here's a design I created a while ago, but never shared online. I found it while decorating my tree this year. I decided it was too good to keep to myself. I've provided updated PrusaSlicer 3MF and Prusa MK3S+ GCODE files. I tested the…
this is a neat little box to keep random stuff in, ofcourse the nuts have real threads so you can firmly close tho box! Print instructions Mine ar printed in PLA at 0.2mm but you can print these in any material, color or layer height u…
I used 2 walls and 10% gyroid infill and that seemed well enough to keep it upright and sturdy while holding up a plant.
This is a simple remix of dtm2477's piece here ( https://www.thingiverse.com/thing:4062243 ). I printed the two halves separately and super glue'd them together, but you could achieve the same effect by stacking the models and changing…
Needed: 2x (or 3x) Ikea Lack Table 304.499.08 (or other color, if you like) https://www.ikea.com/gb/en/p/lack-side-table-white-30449908/ and another 4 legs from table like this (so buy 3 tables, or go to “As-is” discount area in ikea…
Simple hard drive mount for a 3.5 and 2.5 inch hard drive. M3 screws required for SSD/2.5 and 6-32 screws required for 3.5" drive. I used VHB double sided tape to secure the drives in my computer.
This is a set of 4 stacking cups that fit the deep profile Milwaukee Packout Organizer. These fit inside one of the original organizer bins and stay snug when the lid is closed. Files include 4 stackable cups with various dividers (open,…
I love the idea of @Clough42 's Gridfinity Grids - Stacked for Printing , but there wasn't much info on how to actually get the printer to do the thing, and I was initially faced with some issues. Comments on that model showed that other…
The slider with the 5x2mm magnets was too weak for me so I remixed the base to use two magnets stacked to be stronger.
Here is a design to hold two Boss RC505 Loopers at an easy to use position. The photos shows RC505mkii (top) and RC505mki (bottom) loopers. The looper trays are pretty big and I printed them on Rat Rig V-Core 3 400mm printer. I had to…
Print 2 or more for longer terminalblocks. Use M3 bolts for securing.
4 stacked Print instructions !!make sure you check your setting!! I printed at 2.0 layer height and 5 % infill. 10 % infill on the supports: a little tough to remove the layers in between the bands
Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!
Up the Irons! This 3D display plaque features the iconic, jagged typography of Iron Maiden in a compact, stacked layout ("IRON" positioned over "MAIDEN"). Designed with a distinct white perimeter outline sitting over a solid black backing…
Stacked openGrid Lite base plates. Plate sizes range from 4x4 to 9x9, and stack heights range from 2 to 9. The base plates were generated with the Perplexing Labs openGrid Generator and stacked using a custom Python script . Plates have…
Planter - Blobs stacked (scale-able) A modern planter design with stacked blobs. Planter is watertight! The inner blob structure is only in the last 3 rows for faster printing. I uploaded one size but it's easy to scale to your wishes:…
Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.
I took the amazing Lantern design made by Laptop-Guy and made a few fixes he did for future lanterns. My biggest issue with the original was due to how it was assembled one side would end up thicker than the other so I added a 45 to the…
These Cookie cutter give you a huge selection of different sizes. From the tiny ones for your afternoon tea to the largest ones to write a name onto. For easy storage in the kitchen they can be stacked into each other. For printing you…
Loved the original model and preferred the look of the covered model but my magnets were too weak after being covered by the top layers, so I made them twice as deep. Process is the same for assembly, add a pause before the top layers and…
modular cutlery drawer organizer with stacked angled cutlery to save space and still be easily accessible. Cantilever snap clips built into design so no additional materials required to attach. Print one of the end then as many of the…
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
V2 REVISED: 15 stack, 3.9mm objects divide into 0.3mm layers exactly. Stacked for more efficient printing. Slightly improved design. Recommended layer height: 0.3mm Recommended material: PETG Other materials and layer heights are unlikely…
Simple to print Stacked PSU Mounts for stacking 2 PSU's together. The Stacked design allows easy access to the terminals, but they are not offset. The design also provides about 40mm of space between the PSU's which will allow for quality…
a clone of a castle rock building block. I sliced with cura using special mode (mold) with the following settings. 1 : wall thickness = 10 mm 2 : angle = 45 deg 3: roof height = 0 mm Update: I use tpu filament to make it easier to remove…
Stackable storage pole for your spools. You can print more tubes for stacking.
This is carlift can be stacked sideways (for diecast Hotwheels, Matchbox, Tomica MiniGT, etc)
Three pumpkins stacked on top of each other. Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5% infill, 2 walls, and plenty of supports around the bottom. Print as oriented. Please comment with any questions or…
Could not find one that worked for me. Even bought some from Amazon. Soooo…I designed my own. The bullet pusher was not deep enough to allow inserting new bullet, especially for 15-20 mags. Neither were the bodies large enough to accept…
I had a great idea for a stackable tray for small parts for my workshop. But as it happens, something went wrong, it simply cannot be stacked :) This opens up a great opportunity for better designers than me to remix this awesome work…
This is a version of my last PlayStation Logo. This time the letters are stacked and are thicker to help them stand up. There are files to print the buttons individually, and a file for printing it together. It is available with a…
Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…
An abstract sculpture created by welding spheres. It could act as an artistic design, a trophy or an award. There is a round and oval version - the oval version (vert stretched) might lend itself to printing with a FDM printer. This model…
I liked the idea of stacked honeycomb printing but did not like the color/texture difference of having every other honeycomb be PLA. I opted to print a thin layer of PLA to separate the 2 PETG honeycombs to print 2 honeycombs. Print took…
This heart-shaped pen organizer is a compact desk holder designed to store pens, pencils, and small tools in an upright position. The organizer is built from dozens of stacked heart shapes , creating a layered texture that forms a…
About: There are already many awesome chopstick-holder designs out there, but I wanted to tie in the concept of eating Chinese or Japanese food with the peacefulness of Zen practice in those cultures, so I decided to design a chopstick…
Mount to stack a Raspberry Pi 3B and a SKR Mini E3 on top of each other. The design is based on the mounts for Voron 0.1. To mount it, you also need a fitting Raspberry Pi 3B Mount. I designed it to stack the SKR on top of the Pi. It…
A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans. Each layer can use either m3 nuts or screws (see photos). No supports needed for printing.…
Stacked Book-Shaped Smartphone Stand.
