Liczymy pasujące modele…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale I wanted the Lego Bicorne for my skeleton. Did not have the skills to make it myself. So after a long time trying to make it,…
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
It seems as though every Roku remote has different specs. And they are all vulnerable to breakage of the battery cover. So here is a replacement battery cover for the Roku Voice Remote, model RCA1R, ASIN:B0BQS9Y69G. I print it on my Bambu…
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
I remixed my remix (This Original is Ductippi's CB09 adapter ) again because the first version was a bit too small for me when I changed the tools and I wanted to have a surface on which I could mark so as not to mix up the knives. Then…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Welcome! Your MIN journey has begun! I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines! Have a look at the original MIN If you like what I…
I bought this Arducam 5MP Wide Angle USB UB0233 camera on Amazon, to try out with OctoPrint. I had it wired up with twist ties. I couldn't find a mount specific for it, so I figured I'd make one. There's a Logitech C270 style connector…
This model is compatible with the lego system.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I remixed the Cameo 4 adapter as I had a few problems with it: My original print in resin did not fit my CB09 due to manufacturing differences It was not possible to properly secure the adapter with the push fit thing in the…
This model is compatible with the lego system.
Welcome! Your MIN journey has begun! I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines! (The aluminium Bed Plate is custom, if there is…
It says rev E on the camera. not sure what that means. Anyway, added holes to work with this model. I flipped the spacer and sanded it down so it wouldn't pinch the wire going from the front to the back. not perfect but it works. might…
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
Praktischer Adapter für den Makita Exzenterschleifer BO5041 auf das osVac Konzept.
Replacement model for part described below: GE OEM Part Number WB03K10035 Range Oven Stove Burner Knob Made of Plastic. Has a D shaped stem Number printed on back of it is 183D5598 This fits specific GE manufactured range models…
Printed with the top (the part with the hole for the fan) on the build plate and tree supports set to only touching build plate. In testing on superposition 1080p high this kept the card about 10c cooler than the triple fan model and…
These cable guides are for the Dewalt USB Charger(DCB094K) and the matching USB-C cable. The cable should be able to loop around the adapter 3 times with a little slack at the turns. Two guides will need to be printed, one for each side.…
This model is compatible with the lego system.
This model is compatible with the lego system.
These are the Case with I/O slot cover for the JetsonNano 1st/B01/2GB. It can be fitted with a fan. The SD card is not allowed to fall into the gap. JetsonNano Case for JetsonNano 1st JetsonNano_Case_Case_Top_A is Top Case with Top I/O…
This model is compatible with the lego system.
The FRC team I'm a part of (3015) uses these cameras and I designed these mounts. Decided I should upload the .stl's for anyone that wants them. I'll try to post new revisions as well. Print Orientations: The cap should be printed with…
This model is compatible with the lego system.
Bolt-together DIYB0XX designed for low-profile switches. No adhesive or plastic welding needed. Modified 20XX B0XX layout provided by Crane's github: https://github.com/Crane1195/DIYB0XX This is not a guide for a specific end product.…
This model is compatible with the lego system.
It seems there are many many board sizes for Raspbery Pi cameras. Here is a case and cover for the Arducam B0031 with M12 lens to fit Sneaks' Articulating mount. I included screw holes in the mount, but the fit is tight enough with the…
A replacement fan for the Ryobi PSBLB01 compact blower. Printed in PETG with 0.25 nozzle on MK4 @ 0.10 layer height, drill out hole Homelite part# 551631001 Added thicker walled version for 0.4mm nozzle with and without hole PETG, 4…
Version 2 is ready - it is interesting for everyone who uses different knives … The original holder is very nicely made, I love it. Unfortunately, when cutting, it wobbles back and forth like a dog's tail in my Cameo 4. (This is a remix…
I wanted a basic cover to put over my batteries when not in use as I do not like to store them in the tool. Made in openscad. Tried to over engineer it and ended up going back to some basics. This should fit the battery snugly, but not be…
This model is compatible with the lego system.
Sizing edit of @Draco_295340 's deburring tool case. Includes an inset debossed label. Recommended to print in PETG. Example photos are in PLA, debossed label filled in with sharpie (lol). If you do print in PLA, make sure to snap fit the…
A simple replacement part for the stacking pins originally gotten with RC tracks. These are often thrown away early, only to be remembered as handy later on when storing tracks again. The hole for the pin seems to be made 3.1mm (caliper…
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
DIY B0XX/Frame1 that can be printed in pieces on small print beds (the largest part is 100x100x25mm). Modules are bolted together and lids bolted down using threaded inserts. This is not a guide on how to make a DIY B0XX. Join Crane's…
This is a case for a USB Cable Checker model MRB063A available from many sources such as AliExpress. The top part shall be printed with is face on the bed. The 3mf file contains the top part with lettering to be printed with 2 colors. The…
These are the source files for my Arducam B0205 flexible mount project, please read the full story at http://www.drracer.eu/3dp/20201115_arducam Disclaimer: The attached 3MF files have been optimized for my MK3S to print fillamentum's…
Radial Fan, 7020 Model, inspired to Delta BFB0712H . Totally editable, published the following elements: Rotor → girante.prt Motor support → corpo_motore.prt Upper Carter → carter_ventola_1_dx.prt / .stl Base Carter →…
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…
Wedge for fixature and lower the vibrations on VW Passat B5 headlights. Rebuild for VW's 3B0941042 which isn't produced anymore
You can use these pads if you don't have a better replacement, for example to ride to the nearest bike shop to buy new metal break pads :) Compatible with Shimano BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465,…
Spojka ponorného mixeru Sencor SHB 436x ..., na převodové víko, čtvercový tvar řada Sencor SHB 436.. ( určeno pro všechna barevná provedení) SHB 4360 WH, SHB 4361 BL, SHB 4362 GR, SHB 4363 OR, SHB 4364 RD, SHB 4365 VT, SHB 4366 YL, SHB…
Why My Well MB01 came with a 26mm CW threaded outer barrel and, while I have already made an adapter to 14mm CCW, I have to admit "native" flash hiders just look better. So here's a flash hider that screws directly into the outer barrel.…
Sound moderator. The mounting thread is m10x1mm. Exclusively for 4.5mm (.177) caliber Through holes of 6 mm You can use a 6.5-7mm drill bit and use it with a 5.5mm (.22) caliber. Warning Use the moderator only on CO2. Be extremely careful…
Print as is with 0.1 mm resolution, tree support and any infil percentage should work fine. I've almost managed to print this down to 30 mm in length. With a resin printer you could probably go even smaller. I will add another file later…
The Ninja Pods & Grounds Coffee Maker (PB040 / PB050) cannot accommodate some taller cups. This life will lift the unit around 23-25mm higher.
***********IMPORTANT NOTE, THIS IS AN OLDER / UNMAINTAINED DESIGN******** I recommend you get the newer version which has many improvements: https://www.printables.com/model/1097162-swivel-mounted-camera-arm-mount-collection-for-pru the…
just the ENG-BZP_b001 model clearanced on the sides so it only touches the inner bearing races. add supports and blockers so it only adds supports to the bottom surface but otherwise print with the settings specified for the Ender 3 NG…
Suzuki DRZ400 replacement Front Brake Hose Clamp. Model number 59243-03B01. I broke my clip after hitting a cow with my bike (no jokes). From the pieces I had left I designed this replacement clip. Print in PETG to allow enough…
you probably want the newer update to this: https://www.printables.com/model/497457-arducam-day-night-b0205-case-and-swivel-mount-with which addresses a few issues! Should be pretty straight-forward to print & connect. The back plate will…
Over the barrel supressor for MB03. just print it, remove the original cap from the barrel and screw the supressor. Fits only MB03 and maybe MB02!! Easy print, no support needed (use brim for a better base adhesive) There are 2 sizes:…
Especially for those who did not have a 3.5mm bypass sleeve included. Printed from PLA; PetG; PA; PA-CF. All these materials have withstood the pressure of CO2. !Warning! Attention, I do not recommend using it in PCP.
This is a minimalistic enclosure and mounting solution that I designed to mount my Arducam B0268 for my Voron 2.4, although it could very likely fit a variety of other printer frames. This camera is perfect for large printers like the…
For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…
remix of this beautiful design (only for the replicas with TDC installed) Now the arm is filled completely and can be printed for a better accuracy of the bucking touch surface. Category: Sport & Outdoors
UPDATE 2/10/22 - Added a new lid version with much better buttons and a few tweaks to facilitate printing. Doing a filament swap does a nice job of highlighting the logo and button icons. Quick remix of philltran's mapper enclosure to…
A single-slot cooling solution for the LSI SAS9300-8e HBA by attaching a Delta BSB0512LAA01 blower fan that's readily available on AliExpress and other online platforms. Friction fit. Inspired by LSI SAS9300-8e blower fan bracket . Use a…
silencer from AWP rifle for L96 MB01 I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
I noticed, that my Zeee 3S 3200mAh LiPo is a little too long and would pinch the cables. Its dimensions are: 135mm x 43mm x 18mm Therefore, I extended the original Center Chassis part by 10mm to have some breathing room. I also added a…
This is a single dose hopper for the Bezzera BB005, converting it to a single dose grinding capable machine. Mine has a dead space of around 1g of coffee, which is acceptable. The weight ensures steady preload of the coffee on top of the…
3D model of MLEVPB016MRF1. It will Requires supports, but I have designed it for printing as much as possible. Fits many Sharp carousel microwave models. Here is a list of what microwaves it fits: • R1210 • R1405 • R1406 • R1461A • R1462A…
As the title says, fixed the holes and exported the model from onshape
4 wall loops Tree supports
There are several Ryobi leafblower wall mounts out there, but none of them seemed to fit my specific model. Before printing, verify that this will fit your model, I've included pictures of my leafblower for comparison. I printed this in…
This model is inspired by Michal Fanta and arm is based on Original Prusa I3 z-axis-top model. It is possible to use with Raspberry Pi Camera and with Arducam and other USB cameras where is possible disconnect and connect the USB cable to…
Three Options Available! *Simple: A modified version of the official HB0609 "slide" part, intended to help mount the HB0609 to the back of the JSAUX Modcase. *Extended: The modified “slide” plus a vertically oriented ‘ModCase’ connector.…
This model is for two clips to be printed on both sides of the JSAUX HB0603 SteamDeck dock to increase the height of the Steamdeck. The existing design of the JSAUX HB0603(and earlier models) prevents airflow from about 25%-30% of the air…
Dimension from the datasheet. Please "Like", "Review" and “Comment” on the comment section if you like this design.
Spojka na převodové víko mixeru SHB01 Sencor SHB 436 x ..., čtvercový tvar
The part name embedded in the original is 4B0861337B RBU and it comes from an Audi A6 C5. This part broke in my father-in-law's car, and since it's either unavailable or quite expensive, I was tasked with printing one. However, I couldn't…
Battery Case for Sonoff Tuya Motion Sensor I have created a custom case designed to hold two AAA batteries, specifically tailored for the Sonoff-SNZB03 or other Tuya motion sensor. You can choose between two options for installation:…
Infill 15 to 25% you can use the screws Use the emo box to pack up emo’s accessories these work nice for screws https://www.thingiverse.com/thing:2141570/files
this is bracket to NPN sensor for Honeywell PTB003 WaterMeter S0tool
virtjoule model B08LQTD21D is a set of five heat insert tips (M2 through M5) compatible with Weller WES51 irons (i.e. Weller ET-series tips) available on Amazon. However, they come in what looks to be a very basic 3d printed container.…
Holder to mount the 1Mii B06 Plus Bluetooth HiFi to the HSW.
Tiny Racing Bulls VCARB03 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm…
Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…
This model is compatible with the lego system.
Revised to account for rear belted Z in lieu of lead screw Will post photos of it installed once my part arrive and I complete the build.
Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…
A 5-blade toroidal fan propeller remixed to replace the original 5-blade fan propeller for the GE WB02X11025 Range Hood. The original fan for the GE WB02X11025 Range Hood is awful. It's made of a cheap plastic that, at this point, is so…
The Virtjoule Heat Insert Tips B08B17VQLD come in a 3d Printed case without a lid. So, I just designed a very simple cover for the case to slide into. The bottom was made a little shorter so you can grab & pull the case out. Virtjoule…
This model is compatible with the lego system.
This model is compatible with the lego system.
3D printable DIY solution for creating headphone measurements and acoustics research. It is designed to fit the IEC 60318-4 ear simulator coupler and GRAS KB006x pinnae. The external dimensions are designed to be similar to that of the…
I needed a long nozzle to fit into narrow areas, so I made one. It seems to keep a good seal around the insertion point and keeps good vacuum. Below are the settings I used. These are only a recommendation as this will probably print with…
I wanted to turn my analog headphones into bluetooth ones for when my other bluetooth headphones needed to charge. Its goofy looking but very comfortable. Feel free to remix. You can also use just the top part as a starter point for your…
This is a remix of the Drag Knife Toolhead for Voron, adapted to integrate seamlessly with the Stealthburner printhead. It reuses the mounting holes originally intended for the ADXL345 accelerometer to install a custom CB09 blade holder,…
EN: Update 03-14-26: The solar panels I used probably only lasted two years due to inadequate sealing and rear ventilation. I made a new, adjustable, rear-ventilated version for flexible 12V solar panels. Since the original Velux…
Just a RAM mount for a digital tacho. It is made for the KOSO db01rn. There is a M5x30 screw in the Middle to enhance the strength. You need an RAM Mount for your Handlebar. No supports needed to print it properly. I used ABS.…
Please like and download this model, It helps me justify the time expense. Sneaks compatible case for Arducam 1080P Low Light Low Distortion USB Camera Module with an M12 lens. AKA the UC-B18 SKU B0468 (2MP IMX323) Amazon ASIN B0CGLW3Z1N…
My Bontrager Ion Pro RT bike light stopped working after only a couple years. I replaced it with a cheap Lumintop B01, which is great, but the mount is awful. This model is an adapter to attach the Lumintop B01 onto the handlebar mount…
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions. I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display…
Diametro esterno tubo aspirazione 24,6 mm Stampato in PetG Print instructions 3 perimetri 0 supporti 5mm brim
This version contains parts top and bottom for Arducam B0205.
Fits a bit loose to prevent ripping it off from the mounted surface.
This is a modification of 6d6178 's “ Arducam B0205 1080P Day & Night Vision USB Camera Case ”. I've made the screw recess on the front deeper to accommodate a shorter screw, and increased the size of the opening to accommodate larger…
![Adapter CB09 to Cameo 4 [Version 2]](https://media.printables.com/media/prints/449300/images/3702450_9905251e-4f7c-4d0d-9f1b-bec6293280dc/large_display_hohe_version_449300.jpg)
![Oven Knob GE WB03K10035 [183D5598]](https://media.printables.com/media/prints/804965/images/6229319_1f2fd6bd-a856-43bd-baed-59bff824a356_c3e0c2ee-bb6c-4973-852b-045a2b34f767/oven-knob-183d5598-render.jpg)
![Deburring Tool Case (AFA Tooling B01L2XR4P2) [Remix]](https://media.printables.com/media/prints/656236/images/5172135_127ee4eb-1af2-4614-827d-127d6f3cacaf_be530f00-3209-4ede-aa54-90d49423e53a/img_2219.jpg)
