Liczymy pasujące modele…
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I started printing Nylon on the CoreOne and the adhesive on the door handle was quickly coming loose. I initially secured the handle with a screw and a locking nut, but I didn't like the look, so I designed this cover to fit a leftover…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fan guard for core one+ extruder 40mm fan. Print setting: nozzle diameter 0.4mm , layer height 0.2mm, material PETG
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…
After assembling Sam's very tidy MMU3 Community version, I decided to make a few slight modifications to save space on the width of the whole unit. The main modifications are: Buffer Cover: Reduced width by around 2mm. This saved some…
It's ideal for maintenance, filament changes, or simply checking on the printer's operation without having to remove the entire top panel. The custom-designed hinges are engineered to hold the door securely in both fully open and…
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
This is an extended version of the original Prusa CoreOne+/CoreOne L spool holder. The stock holder fits only standard 1 kg spools, so I redesigned it to support wider filament spools used by many manufacturers. The model also includes a…
A redesign of @IceCube Sol. “ Prusa CORE ONE/MK4 Honeycomb Fan Grill Cover (EASY INSTALL) ” where I created a modifier part along with the new design of the fan cover that is now snap on using the existing screw heads and the existing…
At my Core One, dust and debris accumulate in the gap below the door between the frame and the display. This clip fills that gap.
Maximized for the CoreOne Printbed.
Hey Folks, If you search for an Organizer for the Gen2 Upgrade you can find the model here: As you have to remove some screws from your CoreOne during the assembly of INDX using the INDX Conversion Kit, I have made this organizer in which…
The tissue dispenser is easy to print. It's hollow inside, which saves time, material, and costs. For added stability, it can be filled with sand, for example, so it sits firmly on the table. A TPU cover for closing the opening is…
The Filament sensor body from the upgrade package has an error I the geometry, restricting the output PTFE tube so it cannot be inserted all the way. This remix clears the protrusion so it is clear.
Nut aligment tool in package for INDX Founders edition isn't too handy for me. I made my own tool for easy find the position of screw in behind during assembly/disassembly of side panels. Note: to ensure that nut not fall down you must to…
By moving the housing of the magnet further, I weakened the strength of the clamp enough to allow for super flexible filaments to pass the ball part of the sensor. Every other dimensions are the same and it fits exactly like the original…
Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. Remixed it to use 3 magnets (6x2mm) to attach it at the back of the core one
FNT Prusa MK4/CoreOne Shelf_Open Simple buildplate holder (FNT Prusa MK2.5s/MK3/MK4/CoreOne Simple Plates holder with button) FNT Prusa MK4/CoreOne Simple buildplate holder A new addition has joined the popular family of FNT Build Plate…
For those who don't want to use the door for the build plates (for example, I have the Expandable Steel Sheet Holder https://www.printables.com/make/2338792 ), I have created a few new tool holders using the honeycombs. Magnet holder…
My printer stands really close to a wall. I didn't like to have the exhaust directly on to the wall because my apartement is only for rent and i don't want to get the wall dirty over time in that spot. So i designed an exhaust das…
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
I made a handy Skadis holder for the CoreOne Nozzle Replacement Tool (sock).
Print PetG Galaxy Black 0,2mm balanced 3 perimeters first layer speed ,,CORE text print 0,10 mm fast detail 3 perimeters Only one perimeters on first layer First layer solid infill speed ,, 0 ,,One + text print 0,10 mm fast detail 6…
While printing high temp materials, the double side adhesive tape that “secures” the door handle tends to soften and become less (to none) effective. There are endless manners to overcome this problem including a simple m3 bolt and nut.…
Just a different low profile handle for the top glass on the CoreONE to go along with the top door mod ( https://www.printables.com/model/1303271-top-panel-door-mod-for-prusa-coreone-core-one ). Nothing too special, just low profile and…
I had some trouble getting multicolor printing on the CoreOne. Sure, I could have changed colors layer by layer, but some models require a color change within a single layer. I used to have an MMU, so I knew roughly how everything was…
Made this as I found other proposals too blocky when put on the outside or inadequately complex (we don't need no magnet to fill a hole) Print it flat like in the example, clip in the corners - should fit with a clic - and "Voilà!". ( If…
A purge bin for the CoreONE system, equipped with a cutout for a wiper and designed to hold 3 10×3 mm magnets.
Is based on the very same STL from the community CoreONE version. I'm testing it and it works well. This is absolutely the shortest spoolholder (on the new CoreONE+ puck) that works for me with the (mostly) Prusa filament spools that I…
Hey Folks, its Upgrade time again!!!! As you have to remove some screws from your CoreOne during the assembly process to CoreOne Gen2 using the Upgrade Kit, I have made this organizer in which you can easily sort and store the removed…
I love the expandable steel sheet holder from Whity but I have my 3D printer in a IKEA BROR workbench. This workbench has its table to op some C-channel and that does not make for simple mounting of the sheet holder. So I made two…
26.4.2026 Update "I've added a new modified universal spool holder." "Reinforced grip for better control of the holder." "This redesigned spool holder offers an improved, sturdier grip for easier operation." "Optimized for compatibility…
Printed using the same materials and settings as Prusa used in the original: PCCF, .20 layer height, 15% grip infill. I mounted it top-front-center of the enclosure, as shown in the pictures. With four magnets total, the grip is pretty…
Update** added a halved version thats split in two pieces for smaller printers. I purchased a few Core One printers and in the past ive always color coded my MK3/4's to make it easier for assigning prints, with the Core One this is a…
There are plenty of nozzle wipers for CoreOne. But most of them are attached to the bed. So you can only use them for the first (few) layers. This one is mounted on the front left Y-bar holder. So you can use it for any layer. It uses a…
Hinged magnetic door for the filament bay of the Prusa Core One. Based on the original Filament Hatch, this version adds three integrated hinges, allowing access without fully removing the cover. The door closes flush and is held in place…
Filter holder for the CoreOne. Uses the IKEA FÖRNUFTIG (fine filter + carbon filter) filter bundle that is cut in half for space saving and better economics. Can be printed on the Prusa XL Filter are easyly cut with a staney knife, and…
The top cover for the INDX is well designed and works perfectly. However, the smooth, sloped sides provide little to hold onto when opening the top. This handle solves the problem and attaches using the same 2 screw holes used for…
Added cable drag chain that I had from an old printer. Requires fitting new printhead covers with shortened cable guide and mount for cable drag chain. Removed original arm at rear of printer and fitted new mount. Cable drag chain mounted…
My take on the best current feet upgrade for CoreOne. I knew I wanted something low profile and versatile enough to work with the existing anti-vibration pads but not require the adhesive to hold them in place. After a few attempts I…
I was going to make a version out of TPU but the tolerances on this print in PLA was tight enough that while not pressure rated it should be more than enough to stop air exchange. If you are really want it air tight use a bit of silicone…
Some time ago I have remixed the MK4 cover to fit the MK4S updated screen, this cover replaces the MK4S to "Core One", otherwise the covers are completely interchangeable. This is for the same reason as the original, keep the dust out and…
After several weeks of using of this amazing new printer I have found that the side filament sensor was more hassle than help and decided to modify the existing part to just allow to push the filament tube straight through to the…
I used Creality TPU Black. Standard Prusa TPU 95A with the followingmodifications: Perimeter: 2 Solid layers Massive layers top and bottom : 2 each Infill: 15% Infill pattern: Gyroid Nozzle temperature: 230°C
i have the nice drybox upgrade on the coreone https://www.printables.com/model/1298479-prusa-core-one-drybox-upgrade but i wanted to upgrade to coreone+ but i had to little space and the door wouldnt close
My CoreOne adjustment screw seized and I didn't have proper inserts to do upgraded pulley. I was not going to upload, but I felt someone might need this. Here's hex nut version. Handy in a pinch when you don't have time to order and wait…
CoreOne INDX spool numbering plates Easily interchangeable number plates for the INDX system's original spool holder Fits the original spool holder of the INDX system. The size of the center pin (chock) can be adjusted in PrusaSlicer to…
This is a remix of a temp tower for the Core One, using a non high flow .6 nozzle. This is what I used after installing a .6 Diamondback nozzle, as there is a rather large thermal conductivity difference between the brass or obsidian and…
If you are as disappointed as I am in the Buddy Cam 3D you are looking for alternatives. Here's one that works for me - hopefully for you too. It's a tilted mount for a Wyze v4 cam. No surgery required on the camera - just unscrew and…
By default, the Prusa CoreOne and CoreBoxx setup doesn't include a dedicated filament dryer. This simple, yet effective, TPU duct allows you to harness the residual heat generated by your CoreOne 3D printer and direct it up into the…
I made the lever 8mm longer so it can be used with the Top Panel Door Mod. Layer height: 0.2 mm Perimeters: 3 Infill: 50% Infill pattern: Grid Brim: Recommended
Modified @pcgeekesq_2498228 's mount to use M3x8mm screws and nuts since I didn't have any magnets on hand. This version will require you to drill 2 small holes on the metal brace that the enclosure door hinges attaches to. I also added…
You will need 3 magnets 20 x 5 x 2
FNT Prusa MK4/CoreOne Shelf_Open Simple buildplate holder (FNT Prusa MK2.5s/MK3/MK4/CoreOne Simple Plates holder with button) FNT Prusa MK4/CoreOne Simple buildplate holder A new addition has joined the popular family of FNT Build Plate…
This is the ring do you need for the upgrade to the Core One+ for the Filament holder
Original spoolholder remix for narrower and wider spools. Tested with 1kg and 2kg Prusaments.
FNT Prusa MK4/CoreOne Desktop_Covered Simple buildplate holder (FNT Prusa MK2.5s/MK3/MK4/CoreOne Simple Plates holder with button) FNT Prusa MK4/CoreOne Simple buildplate holder A new addition has joined the popular family of FNT Build…
This is a pet project I have been working on for a while. You can get more insight here: The build for the CoreCassettee is relatively straightforward, however, you will need some additional things aside from the leftovers of the…
FNT Prusa CoreOne Desktop_HardTop Simple buildplate holder FNT Prusa MK4/CoreOne Simple buildplate holder A new addition has joined the popular family of FNT Build Plate Holders with Button — a streamlined model named FNT Simple . It was…
On the original holder, there was nothing to hold it in place when I opened my tool tray. This added a box that holds the handle so the nozzle tool will stay put. I printed in ABS with 15% infill and organic supports to help with the…
I started to see that when loading the build plate sometime I hit the corner of the storage box corners so in order to protect them I designed these bumpers. I designed them as slim as possible for 8x1.6 mm magnets and I also made use of…
After testing countless Y splitter designs available online, none of them fully satisfied me — there were always issues with calibration, filament loading/unloading reliability, or both. I ended up spending a significant amount of time…
If you purchased the 4-tool upgrade kit, intending to later upgrade to the 8-tool version, consider attaching 4 additional spool holders on the right side when installing the 4-tool upgrade (at least the mounting plates and universal…
This adapter screws on the back of the Core One L with (4) M3x10 screws, makes a good seal, and has a 20mm+ gap between the fans and filter to ensure the air can spread over the entire filter surface area. The Tesla Model 3/Y HEPA +…
This is a buildplate holder for 5 buildplates of the Prusa MK3 / MK3S / MK3S+ / MK4 / MK4S / CoreOne with an added handle for improved stability, and thanks to that it is also easier to move around. It fits perfectly to the Ikea lack…
This is a simple blank magnetic name plate for the top front of the Prusa Core One, just add your own text. It sits on the angled portion of the top frame yet maintains a vertical front for the name. Uses 1-3 10mm diameter, 2mm thick…
This model, by default, uses 10x3 round magnets. The Fusion 360 project file can be used to change the size of the magnets, the number of nozzles, and modify the size of the magnets and the number of nozzles by adjusting the parameters in…
I print PETG and PCTG almost exclusively. The vents on the CoreOne frequently get closed by accident. This little 12 minute print fixes that. If you need to close the vents, just remove it and set it to the side.
Quick Connect (created by @Jack ) adapter for the INDX system. Connect your PTFE tubes to the filament sensor inlets via Quick Connect. (New Version 06.10.2026: Fixed Easy Print Problem)
Print Prusament PetG 0,2mm structural 7 perimeters glued with superglue I recommend printing on a grainy sheet. I recommend smoothing the bottom side with fine sandpaper after printing. I placed the seam outside the edge
I wonder why it's not a part of factory package, but here's a simple grill knob for your CoreONE. Use M3 screw.
I couldn't find a low profile exhaust attachment for the CoreOne as I wanted to have it turn off to the side as soon as possible. So I made my own. The outer diameter of the circle is actually 102mm as that was a better match for the tube…
Very small arrow that indicates the rotations of the Z-axis. I use three of them in the Core One, running on the Z-axis covers from Ocko https://www.printables.com/model/1343702-core-onel-_-_-_-z-axis-dust-protector
Inspired from Prusa CORE ONE purge wiper/binWaste (Naografix), I decided to construct this from Scratch. It fits for the Corone+ Gen2 with the original Prusa Nozzle wiper isnstalled. Using 6x3mm Magnets. Feel free to modify, FreeCad File…
The tool holders I got had some pretty weak magnets causing loads of docking issues. I got better magnets that were 3 x 10 mm cylinder magnets. I expanded the holes in the original holder to fit the new ones and made a removal hole in the…
This is the CoreOne Benchy. Now the simple benchy can make its own repairs on the fly. Because everyone should have a 3-D printer.
Allen Hex Keys from CoreOne Multiboard holder
Printed in PETG Lid with TPU filaflex Magnets 2 16x6 x 2mm The box can stay in place with the lid on for short prints ore PLA. Otherwise just open the lid. The chambers goes down to approx 17%.
Adjustable width, support 2kg spools, better prevent spool falling out.
I designed this diffuser because the original LED strip created spotlights that reflected on the models and made it difficult to see their details. To achieve the required length, I printed the diffuser as two 150mm pieces.The length can…
Summary: The feet are designed to slide into the bottom of the legs designed by @prusguy. No glue or hardware needed Tips: TPU can be finicky, and settings vary between brands, but don't be discouraged. It's more approachable than it…
Remix of these models: https://www.printables.com/model/1474221-snap-on-coreone-extruder-fan-grill-cover-remake-of https://www.printables.com/model/1389331-prusa-core-onemk4-honeycomb-fan-grill-cover-easy-i I merged the snap-on…
These G-codes automate the tedious process of manually switching and heating nozzles during maintenance on the Prusa CoreOne with the INDX toolchanger. Just run the selected file as a regular print. Files are available for 4 tools (4T)…
Model Description This is my first attempt at designing a custom enclosure for the top of the CoreONE, as well as my interpretation of an alternative method for mounting the MMU3 on top of the CoreONE while keeping everything enclosed.…
I've adjusted some overhang angles on the original model for easier printing, as I was having trouble getting clean prints using Polylite PETG. Also adjusted the wiper holder width and depth to fit A1 style silicone brushes. NOTE cut the…
This Remix is for anyone looking to mount the Wyze Cam OG in their CoreOne. I had a few for my MK4S printers so I opted to try to use them instead of buying the Buddycam. I redesigned the bracket in Inventor so that anyone can easily…
Meant to prevent snags in my CoreOne when the filament tries to escape sideways from a loosely wound spool. Not the best invention since sliced bread but it does help sometimes. Affixes to the CoreOne frame with cylindrical neodymium…
Minor changes to for printing. Kindly follow the perfect description of the original post. Controller holder is unchanged, i.e. model can be taken directly from original model.
This is a sheet metall side wall to use a Panda Breath champer heater inside the CoreOne. It is base on the Prusa OpenSource modell.
These are labels to show the nozzle size and type (CHT or standard, non-hardened or hardened). I have included 3mf files setup for the COREOne+ INDX printer so that the text can easily be changed. I have also included a storage tray and…
A easy to print box for A5 papers that you can print on Prusa MK series and CoreOne.
Remix of backside for https://www.printables.com/model/1205791-camera-case-for-esp32-cam-and-the-core-one-v2 but with smaller 6x3mm magnets - seems to be holding just fine.
Werkzeughalter für CoreOneL Werkzeug, Feilen, Skalpell, Schaber, Stechbeitel , Entgrater, Zangen, Seitenschneider, Messingbürste und Filamentverbinder Tool holder for CoreOneL tools, files, scalpel, scraper, chisel, deburrer, pliers, side…
Für das reibungslose Durchschieben von MMU und seitlicher Zufuhr mit geraden Eingängen zum Aufstecken auf den SwingArm. Der Kabelbaum des Extruders kann mit eingehängt werden. Ausserdem braucht ihr noch 3St. PC4/M10 PTFE…
I printed it with all .4mm nozzles, it would benefit from a couple smaller nozzles for the orange and the white.
Just be aware I made this at a time nothing was available for Ultimulti and Prusa blob mmu3. so me as a not designer I just did what I possibly could. I know it’s horrendous, but works! The holes need to be a bit punched through. As I…
Benötigte Kaufteile: 2 Lager Typ 628 (24x8x8) 4 Einschmelzmuttern M3x5.7
I didn’t like the standard CoreOne spool holder, so I designed my own. Capabilities Larger spool holder shield so the spool does not fall off as easily Supports different spool lengths 7.5-14 cm: Default: 7.5 cm RecommendedMax: 12 cm…
