Liczymy pasujące modele…
* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
It's very close to the original and can be used as a template to create other parts.
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
20L Jerry Can
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…
I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…
This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…
High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…
These sliders were perfect but they were too wide for the comp truck body so I made them smaller.
Whipped up a 40mm width mount for the nice front bumper farmersmark has made: https://www.thingiverse.com/thing:3531283 fits like a glove. I was lazy and you have to drill a hole through the smaller through-hole to attach the original…
Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…
If you want to use Losi Mini-T springs on your Capra or SCX10.3 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
Axelstand for your rc crawler more specific Axial SCX10 III portal axels AR45P (AX1232022, AX232023). Can be used on front and back. Hardware 2x M3 x 8mm Cup screw 2x M3 nut For more info in swedish Buttyboys.se…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
-uses m3 screws -can be flipped upside down so the text is not visible -The pintle hitch mount is for this pintle hitch!! https://www.printables.com/model/279936-18-scale-110-scale-pintle-and-pintle-ball-combo-tr/files
FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…
These are rock sliders that can be installed on the Axial SCX10 iii Basecamp. I printed these from Prusament PLA as a prototype and have yet to break them. If they break, I plan to use some Prusament PC blend CF. You will need two M3x10…
This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…
A wedge to raise the motor up away from the rails when using a HobbyWing Fusion with GSpeed skid plate and chassis rails. The opo named files tilt the transmission side to side while the other files tilt the transmission front to back.…
Scale accessory for Axial SCX10 III Jeep JLU Wrangler. Roof rack that can be mounted in the front, middle, or rear of the roof. There are two mounting options: either using double-sided adhesive tape or by screwing it directly through the…
Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…
PLA for indoor use. 2 or 3 walls depending on nozzle diameter, 20% to 24% your favorite infill. No Supports Required (4ea Required) Saw Horse Stand Vertical Piece (2ea Required) Saw Horse Stand Horizontal Piece (8ea Required) 3mm x 10mm…
I tweaked the original so it would line up better on the SCX10 II, then replaced the stinger with a bull bar and tweaked the bumper to fit the frame more closely and allow better approach angle. TinkerCAD for front bumper:…
downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.
STL VERSION RELEASED! - It is time (after 2+ years) for this model to be freed from my Patreon I grouped the three handle versions together because I couldn't stop them from laying on their side in the slicing software and it's a pain to…
Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…
Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…
This is a new roof rack that uses the same mounts as my previous model. The idea is that you can replace the roof rack without having to modify the mounts if you have drilled and screwed them into the car body. Link to previous model:…
Fits Axial 1.9 bead lock wheels. Category: R/C Vehicles
Habe mir zwei Rock Slider erstellt. Abgestimmt auf den Jeep Cherokee von Axial (SCX10). Vorteil: man kann die Karosserie in den Rock Slider klemmen und die Seitenschweller in der Breite einstellen. Karo klappert nicht so, einstellbare…
A simple front bumper for a SCX10, have not tried it on a SCX10-2 as of now. You can print it without supports but it may not be optimal for the end quality. There are also holes for 2x 5mm leds.
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for R/C car 12mm hex
I play a little with the thinkercat and designed a body for an Axial SCX10
This is a full back of cab for a RC4WD Mojave body and Skids that will work on an SCX10 ii or similar to mound the cab using screws there are optional brackets to mount the back using screws or you can just glue in place.
Secure mount for a battery in the front of the SCX10. Uses 4x M3 screws. Sized for a 5000mAh box LiPo. I can alter the size for different batteries, just shoot me a message. The Basecamp body still fits in this configuration but I can't…
I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis. Steering servo in stock position and a servo winch flat and as low as can fit up front on the chassis. You may have to space your servo up depending…
AXIAL SCX10 Ball Joint nozzle 0.25 or smaller
Motor flip mount for the original scx10 transmission, A little bit thicker in design then my 10.2 style flip mount but otherwise a similar design. Should also fit 10-14 pinion, maybe a bit more and a bit less. I also mirrored my trans…
Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…
Simple 1:10 Toolbox for scale RCs. Category: R/C Vehicles
Flip your 10 ii kit transmission and motor forwards for the best cg! The motor flip mount fits a good range of pinions, 10-14 at least, maybe a bit lower and higher. The motor mount is pretty solid as long as you print it pretty thick, 5+…
Remix of SCX10.2 shock front hoops by justicedspencer This is the V1.0 of shock hoops for the SCX10 2 that allows for near 1:1 motion ratio and scale angle shocks (straight up and down, not angled) and allows for long shock travel while…
Battery tray to take the big hard case 5200mah 3S lipo batteries, mounts to the original tray mounting points on the right hand side, made it as low as possible without cutting original splash guard, 3mm walls, print with supports.
Add magnets to your GCM Racing J2 Skeleton Chassis with China JK body for quick and easy removal. Holds great. I also added an area for the on/off switch to go. Can be trimmed if not needed. You will need to drill 4 holes in your chassis…
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for 12mm hex R/C vehicle.
general description The chassis geometry is 100% identical to the original RC4WD Trailfinder 2 (11.2"). All mounting points, bumper mounts, body mounts, shock mounts, and leaf spring hangers are 100% RC4WD compatible. The Gearbox. Only…
Fits Axial's 1.9 bead lock wheel. PoisonSpyderRings_V2_1_fixed: recessed holes for screw heads, larger inner circle. PoisonSpyderRings_2: standard bead lock, smaller inner circle. Category: R/C Vehicles
Shock extensions based on aluminum aftermarket ones. 3 files are included - the specific setup I have for front and rear, and a universal one for more adjustment options. You will need 2x M3x10 screws for each extension, so 8 total if…
this link works great with the ball bearing that you can find on printables if you type in scx10 all my links that are 1/10th uses them and in the hole with minimal filing. Printed in PLA then PETG 100% Enjoy! MRC
2025 06 25 : News : i've added a full 3 links set : the C-hub and the panhard bar support, see pictures. Beware : to have no bump steer the panhard and servo link need to be the same length and to be parallel. Use the v3 and the servo…
Imported from my designs on Thingiverse. Original upload was 18.07.2019 (dd.mm.yyyy) I do most mechanical design. Can do easy basic patching. Mount/bracket for your "CNC Black Aluminium Transfer Case" with mostly 2:1 gear ratio. It has…
WORK IN PROGRESS. Just want to share. 1.9 Bead Lock Wheel Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be…
Easy to print may require a small amount of filing to fit the ball joint in. Have fun! MRC.
These are bumper brackets for the Axial SCX10. Made these so that I could extend both the front and back to fit a new body. Also added stabilizers to use towards the battery holder as I had to move mine to the front. The battery holders…
This adapter will fit RC4WD 1/10 scale Warn winch to the RC DC front bumper for an Axial SCX10. I will download the RC DC front bumper file and give credit in a separate model profile.
1.9 Beadlock wheel 12mm hex. Uses Vanquish Products SLW style hub to mouth to hex. Modeled to match my Full size truck wheels. The file ending with BIS has a support structure already built up to support the print Category: R/C Vehicles
8 hole beadlock wheel for 12mm hex RC vehicle. Split into two pieces, thus no support required. However (5) M3x6mm screws are required to secure the back to the front. (12) M2x10mm for the rings. Rings for the wheel can be found here:…
I wanted to be able to mount a Tamiya f350 body on my axial based 6x6. So I came up with a factory ish option to be able to mount it. Bolts on just the same as axial sliders and has side screws for the Tamiya holes. You can also use long…
general I often build crawlers with third-party links, custom links, and other rodends, and I always have problems getting the links to the exact right length. That's exactly what these tools are for. Currently only available for the TRX4…
Axial SCX10 Shock Seals The SCX10 factory shocks are well known for their terrible leaking. I've tried a very simple approach at fixing this issue by replacing the spacers beween the O-rings at the shock body bottom. After this simple…
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
an upgrade to Ascender body mounts for SCX10 II https://www.thingiverse.com/thing:3210534 These should be more universal to different lengths of bodies. part A screws to part B, separated for strength. Bumpers can be found here…
Front motor mount for injora gearbox , others should fit. Needs M3 square nuts and m3 screws. Transfer case, use parts from the SCX10 gearbox ( bearings and gears ) . M3 x 30 screws and nylocks. Grease if you want. It slows the rig down…
battery tray mounted in the front and center I printed mine in ABS, but really anything would work. I printed it with the small closed end on the bed seems to work well. You will need longer m3 bolts
Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)
This is a front bumper / grill for an scx10 hot rod build. it includes a servo mount under the grill. I haven't printed it yet to know how well it fits, but it should be good. There is a pretty good remix of this over here…
A roll cage style bar that sits inside of the lexan of the windshield on the Axial Scx10.3 CJ7. descrete and provides ample protection to keep your widnshield form getting caught on rocks and ripped off. made because my friend and i have…
Print in TPU. Glue to the rear lip of the rear inner fenders.
My kids have a bunch of the Bruder brand toys including the big lowbed trailer. I thought it would be fun to tow it with my Axial SCX10 RC truck. I wanted something simple that bolted on easily. I found someone had already designed the…
I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.
Эту модель я сделал, чтобы переместить бампер ближе к кузову, так модель выглядит лучше, а также улучшает внедорожные качества. Для печати я использовал abs gf. Но вы также можете использовать abs/petg. Для большей прочности используйте…
Quick little fuel cell I designed to cover the holes you have to cut for the rear shock towers on an Xtra Cab body mounted on an SCX10.2 (I have a file for body mounts). A few rare earth magnets in the bottom of the cell and a few on the…
Cover up the ribs on the existing rock sliders with a slick plastic surface. will reduce hang-ups and allow the vehicle to actually slide over sharp rocks. Compatible with all versions of the SCX10iii. use 4x M3 countersink head screws…
This is an add-on for body post/mounts if you printed my remixed long travel shock mounts/hoops ( https://www.printables.com/model/730892-long-travel-shock-mounts-for-axial-scx10-2 ) These just bolt onto the inside of the shock mount.…
Simple model to add a little dimension to the front of the Axial SCX10 ii Deadbolt. It is a work in progress, currently no specific mounting system so that will be up to you for now. Also needs some fit and finish before I will be happy…
SCX10 II style transmission skid plate available in three different versions. One has built in mounting tabs for the rear upper links which can conflict with some longer motors. The second has no tabs and will require the use of a nut to…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
Hierbei handelt es sich um ein ergonomisches Schwenklager, welches über die vier Gewinde ein Achsgewicht aufnehmen kann.
ESC mount for the SCX10 III to mount the larger MAMBA X ESC above the micro servo. Requires 2 x M3 x 6mm Screws and uses stock holes for mounting. Print in the orientation downloaded. 5 walls 4 Top & Bottom Layers Print using PETG Print…
Smaller Slipper Plate for SCX10 Crawler Belt Drive Transmission The stock slipper plate is too large to fit in the aliexpress belt drive conversion. So here's a smaller slipper plate. Get the belt drive conversion here:…
Trying to mimic original 4-link truss. Made one out of PETG- didn't last long. One out of PA6-GF 25 - currently in model, doing fine. One in TPU98A - in reserve.
simply collar to hold a zip tie-antenna. print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert…
Aufhängung für SCX10 Crawler für den Achsschenkel.
The shackle holes are symmetrical 2.4mm and not threaded. I printed in PLA with 0.20mm layers and the screws threaded securely with no other preparation (I oriented them opposing directions for each side).
When refoaming a BeoVox CX100, you need to apply pressure to the inner and outer rim of the foam at the same time. This ring will help with applying the pressure. Print the ring, best is to print 2 per speaker so you won't have to wait…
Temporary wheel for RC models with an outer diameter of 107 mm, designed for safe storage of the vehicle. The rim is made of PLA/PETG, and the tire is made of TPU. Features a standard 12 mm hex mount, ensuring compatibility with most RC…
Modified this well designed bumper platform to mount an ascender truck body to my SCX10 II. Bumpers can be found here https://www.thingiverse.com/Goodsons_Hobbies/designs The rear is a strong hinge joint and the front is a simple pinch…
Servo horn to use Injora 2065 servo on a SCX10 Pro. Might also be compatible for the same servo for SCX10 III DIG.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
I've always had a problem with the cheaply designed dually adapters for 1/10 RC cars, so I've set out to make a better one. I have designed one of these before, it had some issues, which I fixed in this version. This is designed for 1.9…
Mod for the Cheerson CX10 & Hubsan Q4 mini quadcopters. The mod turns the mini quadcoptor in to a rolling RC Vehicle which looks like a sort of Star wars Tie Fight. Whether you have the CX10 or Q4 both models fly well with this mod added.…
