Liczymy pasujące modele…
Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…
Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.
Update 7/17/24 Added PEI texture Import the new PNG override the old one change bed shape to x:220 y:244 paste 0x0, 0x12, 220x12, 220x0, 0x242, 0x232, 220x242, 220x232 in exclude bed area section ( print area remain 220mm/220mm ) Import…
UPDATE:8/9 added a bowden guide so filament enters extruder straighter. was having issues with loading new filament where it wouldn't be grabbed. UPDATE: Made the nut thicker so doesn't slip as easy. slap a zip tie on it once snug Update:…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
Plug for the hole on back when relocating spool holder. Printed on Infimech TX default TPU profile + tree supports
What? Printable solution for using any flavor of 104mm, 108mm, or 110mm sleeved ear pads on your Hifiman headphones. Unlike other options, this solution is much slimmer, doesn't require supports, and is designed for quick printing. Note…
Sandwiches between printer and whatever you are using for exhaust. Help keep the heat in for abs/asa but let it out for pla
For my Fimi X8 SE 2020 i designed and printed propeller guards. The fixings are different and adapted to the front and rear mounts of the Fimi. Print instructions printed at 0.20 heigt with 30% infill and Prusament PETG
This storage bin hangs delightfully off the top of the 3D printer, zero tools necessary. There are two separate models, one for the bin itself, and the other is for the hooks to hang it from. These can easily all fit on a single build…
Ear pad mounting ring for Hifiman headphones. The model fits similarly to the original. The design is slightly different to the original due to the differences in material properties. This model is meant to be printed with PLA. Update:…
8/31 added model for v2. makes use of the different hole pattern Super simple wall to section intakes and out takes. In stock config the heat exhausted from the PSU gets sucked right back in. leaves about a mm under it. Including step so…
A headphone cradle for the Hifiman Sundara. Inspired by the Hifiman Shangrila Headphone Stand.
This spool holder hangs off the top of the printer, allowing you to mount your spools on the side of the printer. Depending on your setup, it might be better for your material to be on the side of your printer, instead of the back.…
Update 7/14/24 Updated the door latch now door has no wobble during print. now door latch can snap on the screw, so no need remove whole side panel. ___________________________ Update 7/15/24 Minor improve on the hinge insert nut…
Update: minor adjustment to fan bracket so there is a little overhang to help guide air. Will need supports on print. Since getting parts from Infimech seems difficult, and they aren't listing the aux fan anymore, I took matters into my…
This mod allows you to attach an external battery to the Fimi A3 Drone, eliminating the old one. As you can see from the photo, I cut the cables from the old battery and kept only the cap. In this I made two holes to let out the power…
Bracket to relocate filament runout sensor to work with filament relocator . Will have to extend wiring by a few inches. Gromet Plug for old spool holder Alternative top hat
A replacement for Infimech TX (Flying Bear S1) factory filament sensor case. Stock sensor case have strange design decisions like parts of ptfe tube inside, which leads into annoying jamming issues during filament change. Sensor itself is…
Relocates spool from back of machine to left side. uses a small length of PTFE tube. Will need slightly longer bolts. Filament sensor relocation bracket is also needed. Grommet Plug Alternative top hat
Print in ABS/ASA or better because of heat. Reuses the fans that come on it or get some new 4010 blowers. 2 10-15mm m3's to attach to back of hot end. 2 tiny self taping screws to attach fans to ducts/bracket. Organic supports. Set to…
This is a headband model I made for my Hifiman Anandas, it should work for the Sundara as well and all Hifiman headphones with the same type of Head-strap contraption. You do have to do some disassembly to install it but that should be…
Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…
Se trata de un sistema sin tornillos para poder colgarse del cuello el mando del Fimi X8 Print Settings Printer: DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Not necessary supports / No hacen falta soportes para imprimir…
Goes together more or less the same as V1 but now takes 5015 blowers and has less pieces to /print. 2x 50150 blower fans acid free carbon 2x m3 heatsink message me if you want the multicolor model Join the discord 9/10 EDIT : redesigned a…
Update: added a passthrough that uses 1x 2 pin and 1x 3 pin jst connectors. Kinda of a PITA to get them in but they are supposed to be a friction fit. Will need a little soldering Easy and quick TPU grommet for where the wiring comes out…
This is a lid support bracket for the Infimech TX. Without the brackets, the lid would have to rest against a wall, or completely removed. This allows me to just flip the lid open. Mounting uses the original two button head screws on the…
Please note the non-commercial license on this item. You are NOT allowed to print and sell copies of this thing for a profit. Please send me a message if you want to print and sell. This gimbal protector attaches by hooking onto the sharp…
Lid alignment tabs for the Infimech TX. Print two and use the existing screws to mount. This is totally unnecessary unless you have OCD like me and hate to see the lid crooked. I also used small binder clips to pin back the velcro tabs up…
這是用於 Infimech TX 的插座，帶有 m4 嵌件。
I did not like the complicated design of other tablet holders, including screws and so on.So I designed this one. The tablet will be attached with Velcro. To avoid putting Velcro on my tablet, I just cut the top from a cover and used the…
This is a light weight extruder using HGT internals. Over 70g Lighter (see photos) BOM: 2x M4 heatset inserts 2x M3 heatset inserts HGT extruder - and accompanying hardware A 10 tooth nema 14 like this one Direct swap, though you will…
Designed and created a filament sensor that sits on top of the InfimechTx's extruder. I was tired of reaching around the back to manually feed filament through the stock sensor. Moving the sensor to the extruder allows easier access and…
same install as the other one but uses 2 608 bearings for low resistance on reverse bowden. use organic supports for main body and regular supports for roller
The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…
Clip for attaching PTFE to the Cable
Please note the non-commercial license on this item. You are NOT allowed to print and sell copies of this thing for a profit. Please send me a message if you want to print and sell. Introduction This is a clip-on sun shade for the Fimi X8…
you can scale it as you like. recommended settings are 0.1 layer, 30%infill, no supports. just put the two parts together and fill it with epoxy/silicone/... should be not too hot if you use PLA, i recommend using soap or oil so it drops…
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
holder for attaching a plastic coil inside the printer without drilling holes
Hello, Custom yokes for the Hifiman Edition XS if you want to mod you headband. Might require some extra tuning after print for the screw holes of headband connection. Uploaded are two versions. -Ver 1 is without extra material and might…
The spool holder can be printed with a 0.2mm layer, with supports on the screw part. The nut is recommended to be printed with a 0.15mm layer. For the model in the photo I used orange Prusament PETG with 4 perimeters and a 20% Gyroid…
Grigori Efimovitch Raspoutine — Buste 🇫🇷 Description Ce buste représente Grigori Efimovitch Raspoutine dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle sobre et équilibré. Les…
Corner brackets to mount 4x HSW panels to side of TX. Should fit either side. Uses the lower top and upper bottom bolts in the corner extrusions. No need for additional hardware 4/20 - was pointed out I had the wrong grid. updated to 8x8…
Might not be needed, it's even detrimental because you loose 3mm of z height but you won't get bits of filament and dust in your z motor. Print 2 pieces. Print settings: 3 walls 15% infill 5 top layers Supports : Normal (auto) - Snug
Namalováno bez zeslabení které tam dává bosch a tištěno z nylonu s podporou, nakloněné. Po třech měsících používání zatím drží bez ztráty kytičky. Na fotce s robotem je náš kus který je používán minimálně a použil jsem ho pro změření při…
3D Scan of a Fimi X8 SE 2020 for reference when creating a new add-on design. The model is still not scaled right, but should be easy possible. Looking forward to your comments
I designed a small tool organizer for the hex keys, the pliers, the tweezers, the little screw driver, the nozzle cleaner, the spatula and the extra screws. I also added space for a brass bristle brush and a small cutter. I printed it…
This is a remix that basically ensures that the assembly be as sturdy as possible from the original. In all fairness, the original was great, except, I felt that the brackets and base should be printed in one solid piece which is what I…
Xiaomi Drone Front Cover. For FIMI X8 etc.
a bit better views than the stock camera position, requires a m4 screw that is a bit longer than the stock one from this part of the machine (pic below) for enclosure the USB cable gonna block the max X,Y movement a bit at this specific…
Botón cinco-direcciones del mando del Fimi X8 SE (Si, el botón que se suele perder...) Imprimir con altura de capa de 0.1mm, muy despacio y con ventilador de capa. Otra posibilidad es imprimir varios al mismo tiempo para un mejor…
Another variant of lid support brackets, to set lid open without relying on nearby wall. This one uses side sheet screws to mount without touching main frame screws. Also there is 0.2mm membrane on one of the holes to print without…
A small mounting surface to mount your modmic to your pair of Sundaras. Bonuses Allows avoiding mounting directly to the headphone cups. Allows the mic to swivel slightly left and right. Hardware 2 x M3 16mm flathead screws (I used…
True parabolic range boosters for the Fimi X8 SE drone. Print two of each of the STL files to make two boosters, one for each antenna. Use enough perimeters that you don't get any infill in the vertical wall You also need a metallic…
Volcano Grill for HiFiMan HE-500, HE6 etc. for more open sound stage. Does fit the original retention ring without issues. Prints without supports.
This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…
Quick and easy printable guide for 608ZZ ball bearings for filament spools and filament boxes. The bearing guide is so tightly designed that it does not need to be glued to the ball bearing and can therefore be separated again without…
UPDATE: Supports for back of machine The only real printed part is the backer for the hinges. Parts list; 14x14 acrylic top PTFE passthrough Hinges Some 20mm ish m5 bolts and hammerhead nuts 5mm heatsets Need a heatset press ? I enlarged…
*** V2 out now!*** 9/17: Carbon chamber got the same treatment as v2 which seems to work better. Will fit existing fan housing and face Carbon Filter/Recirculation Fan for Infimech TX. Photos show install. Could be mirrored to run two on…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4TdPiY7BeYf Category: 3D Printing
Filtro para drone FIMI X8 SE. Está compuesto de una parte impresa en 3d y de una lente (lámina de plástico) que se coloca a presión. Las láminas de filtro las podéis comprar en Aliexpress muy baratas en el siguiente enlace:…
This mod for the Infimech TX was in the making for some time. I didn't really like the top hat with which it came but I understood its purpose and the cost saving it brought to make this great machine affordable. Being a 3d printer it…
🇩🇪 Beschreibung (Deutsch) Sammlung runder Cutter für Fimo-Knete und Polymer Clay – zum Farbmischen nach Mustervorlagen Diese Sammlung bietet eine Auswahl an runden Cuttern in verschiedenen Größen, speziell entwickelt für die Arbeit mit…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
A small upgrade for the Infimech TX/Flying Bear S1. It's an articulated hinge that allows the door to swing open to the side of the machine. You will need: • 8 x M3x10 screws and 8 x M3 nuts, 4 screws and nuts per hinge • 4 x 2mm pins…
The stock filter kinda sucks. This works waaaay better. 2x m4 heatsets 2x m4 x 35? bolts. I bought 45mm and cut about 10mm off 4" dryer venting I use an inline fan like this I keep the fan as low as it can go and its still a little cold…
This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…
This is a replacement lid for the BOSCH Profimixx 46 blender. It works best when printed with TPU, which provides a reliable seal for the blender jar. It may also fit other Bosch blenders from that era. Material: eSun TPU 95A Printer:…
Full housing for 120mm fan and adds the ability to have a HEPA recirculation filter. Takes GL-2103 filters like these . can be run as aux blower, aux blower with HEPA, or just HEPA recirculation with fan duct removed. I am told the duct…
Hi! Designed to be printed in vase mode this cover does provide some extra protection to the part of the battery where the actual cells are located and the battery connector, while leaving the external side with USB-C charging port…
Hi there - i needed a guide for my Filament spool holder design is here https://www.thingiverse.com/thing:4712075 This is very simple but you will need some parts and print multiple of each The arm is just 1 piece Then you need 2 spacers…
this is a work in progress. the product does function as it is. all holes are tapped by the screws when putting it together. currently i have printed in asa and it worked but did eventually fail. Printed horizontal with supports if…
Simple dust covers for HE400se headphones. If you have any furry friends (dogs, cats etc.) in your home this is a must have. Material/Temperature TPU @ 235 °C Nozzle 0.4 mm Layer Hight 0.2 mm Top/Bottom Layers 4/4 Speeds…
Supports for Acrylic lid . Print 2. Attach to two screws in top left and right corners
I wanted to print a headphone stand for my Hifiman Deva Pro Wireless, but there doesn't seem to be any models made particularly for it. So I turned to generic headphone stand designs, with my two requirements being (1) the headphones must…
If you build this there is no warranty from me if you kill your battery/drone or anything else. I take no responsibility for any resulting failure/demage/missed profit/etc. You can only build and use your own risk. 2019.07.24. Now I used…
日本語で記入 私のスマートフォンは厚くてコントローラーに入らないので作成 必要性があればダウンロードして下さい 2個印刷 コンパクトに収納 リミックス可能
Initially I made the spool holder mod for my Infimech TX Top hat and liked it for the ease of loading and unloading of the filament and decided to port the idea for the people that do not want to make the Top hat. It's untested but it…
Was asked to make a few modifications for my robotics team. Decide to upload my changes in-case anyone else needs them. The original uploader ( Experiential ) only included 3MF files which made it impossible to get accurate dimensions in…
отверстие 4 мм. установка гаек м4
I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…
do you hate handcranking the press? well then this is for you. simply attach this to your drill and slowly start the drill. If someone did it first, i'm sorry. I didn't check if someone made it first.
Pentagram Grille Mod for Hifiman HE6SEv2 Headphones Introduction Hifiman HE6SE v2 headphones, as well as other Hifiman HE-series headphones that share the earcup design (at least HE400), benefit from the “grill mod”, i.e., either removing…
This is a modified retaining ring for Ender 3 / CR-10 style ball-bearing spool holders. The ring is a few millimeters thinner to accommodate the thicker panels of the Infimech TX. Amazon link - Example spool holder
Adhesive bottle holder for Infimech TX/Flyingbear printers. The maximum diameter of the bottle is ø50mm . It is recommended to use supports as shown in the photo during printing. The width of the wall where the holder is attached is 2mm .…
A modified version with two springy tabs, enabling printing with PETG.
Simple yoke made for my Hifiman Ananda Stealth to use with the Capra Headband v3. To use with the stock screws from how the stock headband is secured, but you can use your own. Print with PETG. Link to the Capra Headband v3 made by Brian:
Ejection Tunnel for the "Anfim House Self". It's about 0.5 cm shorter and will reach more into the middle of the portafilter. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes Resolution: 0.15 mm…
Printer: Ender 3 V1 with direct drive mod Slicer: Orca Slicer 2.3.0 Print settings: 0.2 mm layer height, 100% infill, no brim, skirt Material: eSUN PLA+
Was asked to make an adapter for the BIQU Nebula extruder for the TX. This is what I came up with. Only have the cad to go off so may need some tweaks so .step is included. Have not printed or tested anything, but should be close and a…
I love the glass door on my Infimech - but I'm always paranoid I'm going to break it while working on the printer. So I hacked up a quick set of replacement hinges to allow the door to be lifted on/off the printer. EDIT 10/10/24: Lost the…
The original uploader ( Experiential ) only included 3MF files which made it impossible to get accurate dimensions in the CAD program. I tried messaging them but never got back to me, I was set on to remake the design until I found that…
sensor de filamento Corrente de cabo para Ender 3 V3 SE/KE
the rear motor mount i recommend to print in 100% fill it don't change the weigh much but gain more strong structure
Hifiman Headphone Dust Cover
Problem: I encountered difficulty loading filament through the standard sensor. This was especially true for filaments of non-ideal shape — cut, broken, previously extracted, or bent. Solution: I designed and manufactured my own sensor…
Progress LED Status Bar for Infimech TX / Flyingbear S1 LED status bar for a Klipper-controlled 3D printer, inspired by H2D. Displays real-time printer state, print progress, and bed temperature. The project works out-of-the-box — no…
