Liczymy pasujące modele…
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
A tool-less case for a Raspberry Pi 5 with the Pimoroni NVMe SSD adaptor base. It's also designed for the OEM Pi active cooler. Assemble the Pi / Adaptor / SSD as per the Pimoroni instructions with the stand offs and 8 screws that came…
Two versions are included, a “Simple” one which is simply the case and a “Mounted” one which allows to.. mount the Pi on something using taper 3x6 screws (I used wood screws to mount it to the side of my Lack enclosure). The “Simple”…
This is a reimplementation of @mikiklopsiki's Inky Impression 7.3" frame case model on Thingiverse. It is written in OpenSCAD to allow customizability, but also implements a few changes from the original on its own: Significantly tweaked…
New Model: Raspberry Pi 5 Case for Pimoroni NVMe SSD
This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
A wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display and Raspberry Pi Zero Print instructions This is a wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display. I…
Ultra small Pi Zero Case with Pimoroni's Pi Camera Module https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module [Type A: USB OTG and HDMI holes open] Top: Zero_Case_withCamera2_Top Middle: Zero_Case_withCamera2_Middle Bottom:…
Uses the simple (no mounts) case by @pyrho for the Raspberry Pi 5 with NVMe Base from Pimoroni. The NVMe Duo kit has 12mm stand offs instead of the 7mm ones in the original, so this accomodates those.
To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.
Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. Four mounting posts are provided to mount the Pi on top and the Hat to the underside. These act as a…
My collection of self designed OLED covers for CRKBD/Corne. Update 10th Nov 2021: added DXF file for pimoroni trackball version. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 10…
I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…
Se adapta para que los tornillos largos incluidos en pimoroni kit nvme puedan unir las placas a la carcasa. Se añade un separador de 1mm en la base para que encaje perfectamente y quede todo firmemente sujeto. Impresión en PLA sin soportes.
Angled case for the Pimoroni Raspberry Pi Pico RGB Keypad. Print Settings Printer: Geeetech Prusa i3 Pro C Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20 Filament: eSun PLA Silver Category: Electronics
A case for the Pimoroni RGB Keypad. Aiming to use it as a macro pad. My thoughts on where to go next... a display? Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament:…
Hi everyone! The original frame was, to my opinion, the most beautiful and practical frame I could find for the PiMoroni Inky Impression 7.3 eInk display. Unfortunately, when I received it, I realized that the 2025 edition PIM773 (the one…
A remixed model to add an Pimoroni NVMe Base to the Raspberry pi 5 This model has the LED & OLED openings (and a version that also has a button opening), and an opening to connect the USB-C port. The 4 holes for the NVMe base need to get…
Please note the different mounting hole positions: Tray - Pi 5 v2 - PIM699.stl: modified mounting holes, set back by 2mm Tray - Pi 5 v2 - PIM699_Original_Holes.stl: original mounting hole positions
Simple picture frame for the Pimoroni Inky Impression 7.3" display. No tools or supports required, can all be printed flat on the bed. The display can be attached to the inlay by flexing it a bit in between the 2 ridges. The inlay can be…
I used 20mm spacers and put the NVMe base on top of the pi. Spacers are screwed to the bottom of the case and to the top of the hat.
There's a popular project right now using a 7.3" Inky Impression display and adding it to an Ikea RÖDALM frame . The original maker cuts the back of the frame to make the display fit which works fine, but I wanted to modify the backing…
The wildfire season in Oregon went from "hey it looks like we lucked out this year" to "who guessed apocalypse for 2020" in a shockingly short period of time. And as our air quality hit the lowest in recorded history I got to wondering…
Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…
This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…
Onshape: https://cad.onshape.com/documents/809c1d9aeac14ebee1c26306/w/fa98b59d5ea349d41a2c8a12/e/640e785a4a9a0e8f65ca9a5c?renderMode=0&uiState=66e48bfcb9fa683c1c80ea15 So, Dr Dread needs a case for a Raspberry Pi 5 with a Pimoroni NVMe…
This compact case is designed specifically for the Raspberry Pi-5 with the Pi Active Cooler and Pimoroni NVMe Base . This NVMe hat* mounts the drive under the Pi, allowing for better cooling of the Pi. I've designed the airflow so that it…
Funny Sign - "The world isn't completely full of morons ...", multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
Increased bezel width to hide non-functional parts of the screen. edit 26/03/25: I initially uploaded the wrong STL. It should now be fixed.
Remix to remove logo from the frame and add spacious back cover since no back cover is provided anymore and the designs shown in the original are very thin and hard to work with. This is not a polished remix in any way, but is functional.…
This is a simple enclosure, the back panel is a push fit. Printed in PLA+ at 0.2mm layer height and 15% infill 4 M2x5mm screws hold the PCB in place
Redesign of ventilation.
Update 15.01.2023: Added the f3d design file of this design. I am working on a new parametric design which should fit the Inky Frame 4 as well! Fiddling around with better snap fit, screws with nuts or screws with inserts. If you have a…
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
A case for the Pimoroni Inky Frame 7.3 color e-ink display with a Lipo Amigi Pro charger as well a 1500mah lipo battery. Uses 3mm and 2mm threaded inserts. BOM: 1x Pimoroni Inky Frame 7.3":…
Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. The case comprises the sleeve case top and bottom sections, sd end and usb end panels, 4x…
No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.
This frame is designed to fit the Inky Impression 13.3" E-Ink display by Pimoroni with a Raspberry Pi 4 mounted behind it. The frame allows access to the buttons on the side of the display and has options for wall mounting or table top…
A simple bracket to allow mounting of the Pimoroni Galactic Unicorn LED panel on an Ikea Skadis pegboard, print lying on the side so as to need no supports. You'll need 4 M2x6mm screws to attach the Galactic Unicorn board, then it'll just…
A remix of the Raspberry Pi 5 case, to support a Pimoroni NVMe hat mounted to the underside of the board.
Features Low Profile: Thinner walls and a sleek front bezel for a modern look. Button-Free Sides: The side button cutouts have been removed for a cleaner, solid frame aesthetic. I made this specifically for my Tempest Weather dashboard ,…
In the original model, I had too much heat, so I created a maximally ventilated version. I am using the original pi coller and an overclocked cpu to 3000mhz. Box is compatible with Pimoroni NVME hat and original pi cooler. Long stress cpu…
This is a simple case for the SCD41 sensor breakout form Pimoroni. Only the top of the sensor is exposed which minimizes the dead volume and therefore ensures quick sensor response. The shield in front of the sensor protects it from…
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
This is my case for the Badger 2040 W, enjoy it :) You need: 4x - M2x6mm screws 4x - M2x3mmx3.5mm thread brass inserts. 1x - ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh Battery Size: 29mm x 36mm x 4.75mm / 1.15" x…
Happy 10th anniversary to the Raspberry Pi! <Description> Ultra small Pi Zero Case with Pimoroni's Pi Camera Module for Tripod. PiZero_case_8_1_Zero_Case_withPimoroniCamera_Top is Top Case.…
A cover for the rear of the Pimoroni Badger 2040. This covers up the exposed electronics on the board but doesn't prevent access to the ports, buttons and connectors on the rear. It requires screws to attach, but doesn't stick out any…
Overall: This is a case for a PICO with a Display Pack 2 mounted to it. I created the case so that I could utilize the 2" screen in a classroom environment, limiting breakage. This seems to be working well. There are now two versions of…
A snapfit case for the Pimoroni Inky Frame 4.0" with the Accessory Kit AAA battery holder: https://shop.pimoroni.com/products/inky-frame-4?variant=40443825127507 The batteryholder inserts with the on-off switch to the back, so I printed…
Note! If you don't have the Pi 5 official case, then you probably don't need or want this remix. Just buy the official Pi 5 cooler instead and use the original model. Print instructions: The top is printed with the top facing down, you…
Housing to hold the Pimoroni Enviro+ as well as the particle detector. The housing has recesses for 3mm x 1mm magnets to hold the backplate in place.
A case for a Raspberry Pi Pico (W) to allow it to both be attached to a wall and have a Pack attached. In my case, a Pimoroni Pico Enviro+ Pack . The case does not close off the gap between the Pico and the Pack to avoid temperature…
I made 2 Versions, one 2 parted Version where you can glue or melt in the Grid and a second one which is only one part. Please find the Bottom part in the Original Upload.
Case for the Pimoroni Keybow mini. re-uses the screws that come with the kit (4 on the bottom while the top lid is kept closed by the switches fitting into the PCB).
Case for Pimoroni Badger 2040. It requires 4x M2x10mm screws and 4x M2 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10 Filament: OVERTURE PLA Black Notes:…
Holder for mounting Pimoroni Enviro Urban into Pimoroni kit enclosure (Stevenson screen) . For mounting you will have to drill 3mm hole in enclosure base, or holder can be glued. Fusion360 file provided.
This is my case for the Badger 2040, enjoy it :) Use 4x M2x12mm to hold it together. Update 4/Sep/2023: New Badgers have the screw holes a little off comparing with the first batches, use the NEW files if you just purchase the Badger 2040.
Update: Added version with holes for usb, bootsel and reset buttons A snapfit, wallmountable case for the bigger 5.7" Pimoroni Inkyframe with the accessory kit AAA battery holder…
A basic case for the Plasma 2350 (W) from Pimoroni. It assembles with the screw terminal wires already connected, so no need to thread cables through any holes. The USB-C and 4-pin JST-SH connectors remain accessible, and a small hole…
I needed a case for an RPi with the automation hat so I made one in OpenSCAD, using 4 M2.5 spacers in 8mm (male-female), 4 in 10mm (female-female) and 8 M2.5 screws. I had best results printing in 0.2mm layer height; supports (on build…
Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case. In order for the Pi to have air flow, the SSD is held away from the base. This was designed to be used with a Pi running Home Assistant, replacing the SD…
Assembled with two countersunk M2.5 screws.
Raspberry pi zero 2w case for Pimoroni Audio DAC Shim A remix of Ofek256 ender 3 mount case I couldnt find any cases for the RPI zero 2w that had space for the header pins and a DAC shim, so this remix allows for this. Hope this is of use…
I printed the case top file AndyT provided and you should do the same. I then took the case main file and added a cutout to display the gold silkscreen art on the bottom of this most excellent macropad.
This simple bezel can be attached to your Pimoroni Inky Impression to centre the E Ink display so it looks more like a traditional picture frame. These files will fit the Spectra 6 versions of Inky Impression 7.3" and 13.3" (released…
I bought one of these 2.8inch LCD displays ( https://shop.pimoroni.com/products/pico-display-pack-2-8?variant=42047194005587 ) to use with a Pico W as I wanted a small, but capable bit of screen space to show some stats etc. It just plugs…
Remix of the sparkyws Raspberry Pi 5 Pimoroni NVMe SSD Base to remove the lip for the GPIO case variation.
Holder for mounting Pimoroni Enviro Weather into Pimoroni kit enclosure (Stevenson screen). For mounting you will have to drill 3mm holes in enclosure base, or holder can be glued. I also had to drill a 12mm hole in the base to allow…
The official RPI5 board with Pimoroni NVME and Waveshare PoE hats stacked with the same M2.5 7mm and 16mm stand offs. No meshes here, if it's beneficial to upload one I can but they are a pain to work with in Fusion and I hate them.
I acquired a Pimoroni Keybow as a potential macro keyboard to try out. However, I didn't really like the look or feel of it when sat flat on the desk so I made this stand. Honestly, I optimized the angle in an attempt to get the maximum…
Pi Zero W Case with Pimoroni's Pi Camera Module https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/3893 ) Print…
This enclosure is purpose-built for the Raspberry Pi 5 combined with the Pimoroni NVMe Base ( https://shop.pimoroni.com/products/nvme-base?variant=41219587178579 ) , with all I/O relocated to the rear using the Waveshare…
Since my Pull request is not being processed and I don't want to hide this model it is now available here :) See it on my printer Voron Design for 12864 display This Mod Compatibility This display case fits the FYSETC CTP and since this…
Designed this top shell to replace the shroud that comes attached over the pimoroni trackball. The stock trackball shell is removed by gently squeezing the retention clips together underneath the PCB. The additional purposes of the shell…
These clips let you securely attach 8mm tubes to the little plant pots that come with Pimoroni Grow kits, ready for auto-watering shenanigans! https://shop.pimoroni.com/products/grow -- 15/09/2022 - Added versions with a 2mm and 5mm gap…
Designed a case for my Raspberry Pi 5 with a Primoroni Duo NVMe HAT. No supports needed, I used four M2,5 x 10 mm screws to attach the cover. The grill is optional, if u wnat to use gpio or camera (you can design your own grill for that…
This is a simple mod to Ingurum's original case. Walls were made thicker and features moved to accommodate the print specs for a specific printing service. Summary (Front/Back): Walls are 0.8mm or thicker. Cantilevers are 1mm or thicker.…
A wall-mounting box for a Raspberry Pi Zero, a Pimoroni Enviro Plus HAT and a PMS5003 particulate matter sensor . When the HAT is directly on a Pi, the temperature sensor on the HAT is heavily interfered with by the heat given off by a Pi…
Choose the module that best suits your needs: With Power Switch: Perfect for those who want convenient control over their Raspberry Pi without the hassle of unplugging cables. With 0.96" OLED Display: Ideal for users who need real-time…
Now you can fit a Pi5 with the Pimoroni NVMe Duo Base!
Fusion360 .f3d and STEP files of the Pimoroni Automation HAT ( https://shop.pimoroni.com/products/automation-hat?variant=30712316554 ). I grabbed their image of the front side of the board to put a decal on it but that can be easily…
The ventilated bottom offers more airflow to the NVME which will throttle if overheated. Use with original case top.
I design a fully enclosed case for the Raspberry Pi Pico with a Pico Display Pack. Buttons are printed in TPU. This is the first version with the tiny micro-usb hole. If you need the bigger hole check in my profile , I have already…
It's a shell for a Pimoroni 2.1 round screen controlled by a Raspberry Pi Zero W that lives just behind it. It will show AIDA64 data on the screen and doesn't rely on the PC for display input, only the Pi.
A protective case to hold a Pimoroni Tufty 2040 ID badge Tufty 2040 Badge
Needed a case to house a Raspberry PI pico and Screen that I used as a controller for a LED Display cupboard. Simple project to allow individual colour/brightness control of each cupboard compartment. The photos show model with extra…
I wanted to make an audiobook player for my niece, so i used a pi zero with the pimoroni pirate audio headphone board. Ywabiko's pirate audio cases are a work of art, i printed one and it was perfect, but i decided i needed to add a…
The existing models to attach a MLX90640 to a Raspberry Pi transform the whole setup into a thermal camera. I wanted to use the camera while allowing the Raspberry Pi to have other uses as well, therefore created this detachable cam…
Simple case for Pimoroni Pico Explorer Base board to protect the bottom of the board during wild hackin sessions. With cutouts to showcase gold plated Explorer logo and pinout tables. Snaps-on flush with the board by four tabs. Allows for…
This is a stand for the Pimoroni Inky picture frame by printminion There is a hole in the bottom of the stand for power cable when using a Raspberry PI 4 and the frame gives ample room for the increased board size. Notes: Print on the…
A protective case to hold a Pimoroni Badger 2040 ID badge Badger 2040 W
This is a diffuser for Pimoroni Scroll Phat HD and Unicorn Hat HD. It comprises two parts: a mesh grid to keep the pixels sharp and a flat front plate for the light to project on to. Print the mesh in black and the front in whatever…
These models are designed to make fitting the component parts needed to run the Enviro Weather (Pico W Aboard) & Enviro Urban (Pico W Aboard) boards into the Stevenson Screen from Pimoroni easier. The 'LiPo Amigo Pro holder.stl' part is…
I bought the Envito Urban with Pico W Aboard with a a BME280 sensor for measuring temperature, humidity, and pressure, a microphone for noise monitoring and a pre-installed PMS5003I particulate sensor. You can find additional information…
This is just the base of the box. You need the Lid and the Button from the original. The box has several small holes to be able to see the status lights. I used some transparent filament pieces that I cut at an 45-degree angle and pushed…
Slimline case for the Pimoroni Pico Demo boards, two case designs one for DV and one for VGA option. I've also added a different top with a cut-out for a ZX Spectrum rainbow badge for those that want to use the case for a ZX Spectrum…
Requires essential supports for trunk. Print slowly on super fast printers.
