Counting matching models…
General: Make your point in style Why I designed this: I designed this at my wife's request after she saw a hilarious video on Instagram of someone walking around the house and tapping at annoyances like laundry on the floor, hair in the…
General: This stand fits 3 replacement blades, and 2 combs. The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging. Why I designed this: I…
Thanks to @trav_1593464 for letting me know that the holes for the pegs were left out of the original upload. The new 3mf has the holes in place. General: A model of the JASSM AGM-158 Stealth cruise missile by Lockheed Martin Why I…
Thanks to @Aztinoth_552973 for pointing out the incorrect scale on my initial upload. This has been corrected. This weight bench is adjustable for incline and decline, featuring print-in-place joints in the bench assembly. General Notes:…
General description: The oneblade fits into one end and is held in place securely by the cap which snaps into place. A button in the cap allows power button access, and every is printable in a <200mm^3 print volume. I used a 3D scan of…
Note, This version is now obsolete. See my models page for the updated V2. https://www.printables.com/model/1219421-show-off-your-pr-with-dummy-13-olympic-barbell-set I will leave this here for people who want matching spares. I…
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
.16lh on centauri carbon using PalA. Printed in 5min with 2 walls and 15% rectilinear infill. No support needed. Total material used, .93g
General: This case fits the OneBlade QP2724, QP2520 or QP2834, along with 3 extra blades and the adjustable comb. Why I designed this: I designed this to keep my OneBlade safe when traveling. Printing notes: Layer height: .15 or finer is…
Also check out my classroom collection here: Classroom Collection by FabTech | Printables.com Note, It was pointed out that I was originally missing Gold. I have a couple more that are also missing. Missing elements were: Technetium(43),…
General: Speedloader for 30 round Pmag magazine. Split in two to allow printing on smaller print beds. Put the magazine into the bottom part. Use the “Pickup tool” to pull rounds directly out of the box. Slide the pickup tool into the…
I found a variety pack of ziploc bags at target years ago with a dispenser. It helped immensely with our kitchen drawer organization, eliminating clutter and constant interference opening and closing the drawer, getting caught on…
This is a draft version. Nothing moves. I’ll be working on more advanced models with multiple parts, less supports, and moving pieces, hopefully soon. this was printed on elegoo centauri carbon, as oriented, at .2LH with sunlu pla 2.0+…
General: Did I mention it's magnetic? also, I designed it to accommodate a wide range of bag thicknesses and to stay in place with gripping teeth. Why I designed this: I designed this because we never have enough chip clips around. Chip…
These fit modelmasters, mission models, and microscale bottles, probably more as well. More to come, as I finish setting up my wall.
Why I designed this: My 5 year old loves this kind of stuff. Most of the swords I've found for printing wouldn't hold up to his abuses. It was also a fun experiment, since I've never done one of these before. Printing notes: Layer height:…
General: A simple reusable gift box for teachers Why I designed this: My wife is a teacher. I wanted something cute to to use as a gift box for teacher appreciation week. Printing notes: Layer height: .15 or finer is ideal Recommended…
Designed and printed for my wife's classroom. Printed on Elegoo Neptune 4 pro with minimal supports. i used PLA with organic support everywhere. .2 Z spacing, .2 LH.
Someone in the pew pew group was looking for a wall mount for their Remington 870. My Defender 870 shares the same geometry, so I used my Miraco to make a custom fitted secure mount.
General: A quick, comfortable, easy print design to help young students with finger placement when learning to write. Why I designed this: My son is learning to write, and struggles with finger placement. he was very discouraged about…
General: Replace a broken wall mount, or add a wall mount for your Model S cordless vacuum. Why I designed this: I loved my original Wyze cordless vacuum, so we bought an S for the upstairs as well. We were disappointed to find that it…
General: A simple snapcap/dummy round/design aid for 5.56X45mm Nato Why I designed this: I'm designing a speed loader for pmags, and this was a first step in getting that tuned in. Printing notes: Layer height: .15 or finer is ideal…
Using a high res scan of a nintendo switch pro controller, i created this keychain. Note, It’s difficult to print well because of the bottom radii, but doable. Looks great at .15mm layer height with 70+ degree support angle .2mm xy…
Scanned my Phillips oneblade using my miraco plus. Hopefully this helps someone to design their ideal stand or accessory.
Designed to make an easily replaceable sprinker head for a ½" NPT riser or PVC fitting. It doesn't atomize, so there's minimal loss to evaporation, but this also makes it short range and more suited to gardens than lawns. If there's a…
Uses (7) M3 screws and heat-set inserts to hold the mold together. Simply melt the wax and pour it in. let it cool, pull it apart, and enjoy. Made to match Crayola standard dimensions.
General: A quick, adjustable firework stand. Don't let your fourth end in the ER. Stabilize those aerials Why I designed this: I designed this to help make everyone's fireworks a little safer. Printing notes: Layer height: .2 Recommended…
I used a 3D scan of the Philips OneBlade QP2724 from my Miraco Plus to create the handle pocket. The pocket is offset slightly for a perfect fit. The model allows for easy install and removal from the wall, and provides a clean install.…
A scan I took of a Winchester Defender 1300. Should work for Remington 870 design as well. Pre-oriented for parametric designs.
This fan runs on dual 18650 batteries. The necked down nozzle design increases air velocity for optimal cooling. Bill of materials: Bottom cap contact spring: https://a.co/d/hnrPVWE Sliding Switch: https://a.co/d/9z3JiiK Spring contacts:…
A pretty straightforward can holder, made as an entry for the can holder flash contest. I'll be adding printed part photos as soon as I can actually run it, but that will be a while, as my MM printer is occupied with a paying job. Painted…
General: A simple magnetic closure print in place container. Why I designed this: I wanted to keep Q-tips in the car without them getting filthy, and to play with print in place hinges while I was at it. Printing notes: Layer height: .15…
Made to support Freon canisters while charging AC units. When charging AC after replacing components, it is important to vacuum out the system and then charge based on weight using a manifold gage set. This stand allows the small freon…
Designed to be used with 4 18" din rails. Assembly holes are sized for m5 screws. Print accessories as needed. Base Everything else mounts to the base, starting with the din rails. I recommend ASA, PC, or PETG for the base, as it needs…
General: As a composite manufacturing engineer, I have a lot of experience with vacuum ports. These are based on the design of the AirTech ports we use for expensive composite structures to pull vacuum. Why I designed this: The first…
The cover snaps in place and allows the player to save their game, or throw it in a bag for travel. Print the cover on its end for best results.
I found only one other model of the G2 base plate, but it didn't fit and was in STL, so not easily modified in parametric software. This model is precise and .STP is included for ease of use. Designed in solidworks.
General: This upgrade is for the Qidi Plus4. It helps keep the stepper drivers and motherboard cool when operating the chamber heater. Why I designed this: I was printing some PC-PBT for the first time, and the printer kept shutting down…
Printed from PLA at .2 layer height on my neptune 4 pro
General: A simple set of brackets to quickly assemble your photo/paint booth from corro-plast or cardboard. Why I designed this: I wanted to take better photos for Printables and my 3D prints for my own website. Printing notes: Layer…
I wasn't happy with the HSW mounts I was finding, so I designed my own. This should fit about any ¼-20 standard threaded camera. It works for Wyze pan cam v2 and 3, wyzecam v3, logitech webcams with tripod mount screw, gopro, and any…
General: A simple valve cap with Biohazard valve cap with built-in threads. Why I designed this: I designed this as a fun experiment with small threads and small detailed MMU designs. Printing notes: Layer height: .15 or finer is ideal…
General: Just a really quick and simple ring adapter for cleaning rings un ultrasonic baths. As a side benefit, it doesn't disrupt or bog down the energy of the cleaner like heavier duty hangers or baskets do, and it's less prone to…
General: A simple print for transferring Tide laundry detergent remnants to a new bottle. Why I designed this: I designed this as an entry for the detergent contest. Eventually I will be adding more sizes/brands, but don't have any others…
Designed to provide a repeatable location for the Gweike G2 rotary chuck, near center of the work area. Bolts in place using 2-12 m5 bolts. Recommended bolt length is 5-7mm.
An easy way to attach an eraser to your dry erase markers while maintaining the ability to place the cap on the end of the marker while using. Fit is snug, but not too tight on my prusa XL when printed at .15mm LH. I used PLA, and it…
Standard version prints in about the same time as the light version, but uses more material. Fits standard Amazon bolt kit boxes, JST connector kits, heat-set insert boxes, heat shrink kits, but connector sets, etc.. I printed from PLA on…
As the description says. Print as oriented from PC, ABS, or PC/ABS blend, GF is a plus.. .2LH or smaller. 6 walls, 30% triangle infill.
My wife likes her starbucks refreshers. They don't make plugs for the Trenta size, and they are so sticky when they spill in the car. I designed this for her and she loves it. I printed them from TPU with a .8mm nozzle at 20mm/s on my…
General: Scanned the original glass piece with my Miraco Plus. Why I made this: I scanned and printed this so my wife could have her favorite figurine from when she was a kid at home, and keep another at work to inspire her students.…
General: The must have accessory for on the go pointing. Why I designed this: The tiny hand was such a hit, I wanted to start adding accessory options Printing notes: Layer height: .15 or finer is ideal, but aesthetic only Recommended…
Printed from pla, then fixed in place with VHB double-sided tape.
General: A low cost, adjustable, customizable, high powered vibrating table for high quality bubble free epoxy/silicone pours and molds. Why I designed this: I made this for eliminating bubbles while doing silicone injection molding using…
My 5-year-old son is highly motivated by screen time rewards. we have a limit of 1 hour on school days, and 3 hours on weekends, and he does little chores around the house to earn more. These tokens give him the opportunity to save up,…
General: Print your own spare seal for Wyze Cordless Vacuum. The only modification from the original part profile is that I changed the small thin radius to an angular face for better printability. Why I designed this: My Wyze cordless…
Used in conjunction with https://www.printables.com/model/457291-network-cable-comb-v2 for a more organized network closet. Step file included for easy derivatives
Designed these to hold our baby gates open for carrying groceries, etc. I made a spring closure mods for the gates, but there are times we want them to stay open, like when feeding the dogs downstairs and allowing them to access the doggy…
A quick printing brake bleeder cover i made while bleed my niece’s brakes. About 7 minutes each at super slow tpu speeds.
I couldn’t find a secure mounting point for cables on my 8020 cnc frame, so i designed these to drop in and twist to lock in place. printed at .2layer height using petg, but asa, abs, pc, etc would work as well.
Designed this for my son's 12v ride-on toy. He gets to help with yard work in a fun way, and gets to learn a little about backing up a trailer. The whole assembly is lightweight and pulls with no trouble in grass. It's all been designed…
I couldn't find any mounts that would allow the usb ports to remain free on the t34. This allows you to mount the mini PC to the wall with 4 screws, and to the mounting holes with two m3 SHCS or BHCS.
NOTE: This model has been replaced and upgraded a lot! New model is located here: https://www.printables.com/model/1188461-ikea-linnmon-desk-wall-bracket-v2 Best printed from PETG, but PLA works as well. Thicker layers work better for…
I have 4 dogs and a 6 year old. I had my remote in a silicone case, but the dogs really like the feel of silicone in their teeth.. so does the 6 year old. There are plenty of cases available from other makers, but most are just shells…
My wife is a teacher, and she asked me to design some light-weight, inexpensive cubbies to hold her classroom sterilite bins. These are designed to snap together with 1/8” thick hardboard, and can be adjusted to hold as many bins as you’d…
Made this to properly space and support a nema 23 stepper on top of a 4080U linear motion unit from Amazon. https://a.co/d/iyIKNiq Coupler used was this anti-backlash “lovejoy” style connector. https://a.co/d/0nqUxjk Printed from Rakine…
My e-brake release handle was missing when i bought an old explorer. The previous owner was using a pair of vice grips. i modeled this in solidworks to match the original, with a slightly undersized hole. Printed from ASA with 5 walls and…
General: A nice battery storage case using the shell of the Rugged Pinecil XL case Why I designed this: I designed this to give my son a little more independence. He loves being able to change out his own batteries and test them on his…
This is a living system, I intend to continue adding to it as time allows, and I hope others will too. General: Quick printing, low profile, versatile, and adjustable. With it’s miniature serrated locking french-cleat-like design, the…
General: A simple clip-on robot vacuum barricade Why I designed this: I designed this because my robot vacuum gets high centered almost every day on my couch table. Printing notes: Layer height: .2 Recommended Material: PLA or PETG…
General: A highly adaptable cup/can-holder for everything from soda(pop) cans to Nalgene bottles. Clamp is adjustable in 6mm(.25") increments to fit most cars/trucks Why I designed this: I love Nalgene water bottles, but I hate having…
An improvement over my original design, these mounts fit perfectly on linnmon tabletops. I use these to improve rigidity for my printers, and to make my computer desk rock solid.
General: A relatively quick printing all-in one hygrometer display, filament clip, and material label! Why I designed this: I have way too many filaments to keep track of what is where. I also wanted to make it easier to locate my…
General: A simple, strong, stud mountable hanger for Ikea Trofast Why I designed this: We rearranged my son's room, and wanted the floor clear for easy cleaning. This allowed us to use the flexibility of Ikea's system while keeping the…
Designed this for my son's 12v ride-on toy. He gets to help with yard work in a fun way, and gets to learn a little about backing up a trailer. The whole assembly is lightweight and pulls with no trouble in grass. It's all been designed…
Designed these for my wife’s classroom. It allows her students to hang their large 3ring binders out of the way.
Made this to keep our baby/dog gates closed without the need for manual closure every time. Hardware needed: 5x7mm heat set insert x2 3mmx5mm heat set inserts x8 m3 screws x8 5mm socket head cap screw or button head screw. x2 6.5” Long…
General: A simple Din Rail Mountable Teensy controller enclosure for the Teensy BOB breakout board. Options included for cutting your own openings for ethernet and screw terminals, or for pre-cutting your own manually, in case you don't…
I have lots of small plate shaped stock for my fiber laser, and stacking it makes it painful to find a specific piece. This keeps my workbench organized and saves time looking for specific stock.
I wanted to build a portable Raspberry Pi game unit inside a harbor freight apache 3800 hard case. The main issue was protecting the pi in the foam while allowing airflow. I designed this shell to allow free airflow to the Pi while being…
Mounts a nema23 stepper to an 8020 profile. Designed for my custom CNC design.
Holds up better in rain and wind than paper targets.
This is one of many 3d scans to come.
I designed this to prevent damage to my quartz countertops after an incident with canned peaches. Print with the center boss up. Any material, any layer height. V3 is stackable for compact storage. V2 is easier to print. They both add…
I had a customer who broke the living daylights out of his roof trim. It seemed like a good opportunity to practice reverse engineering skills on something with semi-organic geometry. The piece is sized for medium format printers like the…
I wasn't happy with most of the filament storage solutions I found. These mount to the wall and use common ¾" dowels. They can be used by themselves, or placed top to bottom for perfect filament storage spacing, and have decorative…
Designed to allow simple alignment of 3/8" X 3" Stainless tags for laser etching. Printed from PLA at .2LH in about 2 hours. Location of the center of the pattern is inlaid to remind me where to center the lightburn pattern for accurate…
General: It's a simple holster for the Caldwell Wind Wizard 2, Wind meter Why I designed this: I designed this while I was working on a school project where we needed to take wind measurements and then quickly have both hands free.…
Sized to mate a HAAS TL2 with a Rigid NXT shop vac, and to pull dust away during ID machining. Tapered connection on the extension matches perfectly when printed on my Qidi plus4 from polymaker PLA. Magnets are 3mmX15mm from this pack:…
General: A simple pen holder for Papermate InkJoy pens Why I designed this: I designed this for my wife's classroom. She likes her students to take notes in various colors for better visibility Printing notes: Layer height: .2 or finer…
Bolts in place securely with 4080, 1.5x3”, 3x3”, or 8080 aluminum profiles. Printed from PLA With no support. .2 LH.
Made this to mount my 80mm spindle to a 4080U linear stage. https://a.co/d/b0uzuJw This is the spindle kit I used: https://a.co/d/38IEwVi I do not recommend using this with air cooled spindles. Even with water cooled spindles, I don't…
Mount a 40mm wide drag chain ( https://a.co/d/e08rkt0 ) to a 20mm series aluminum profile like the 4080U ( https://a.co/d/eSv96ip ).
General: A simple mount for a 500 BTU vortex chiller and an 80mm spindle Why I designed this: I designed this to mount an air chiller to my 80mm spindle for CNC milling without coolant. Printing notes: Split the model in your slicer…
General: A simple fake eject button for car electrical outlet. There are two versions. One for MMU, and the other for single material. The single material can be filled or coated with an inlay, like fingernail polish for single material…
My wife requested i make her a convenient way to store a few gloves with her cleaning wipe containers. She is pretty happy with the result, so thought I would share.
Mounts with a screw or double sided tape. Prevents swall or ceiling damage(for shower caddys using tension rods) by preventing direct pressure and slipping.
Attach a length of PVC tubing with ½" NPT thread. Brush is optional but recommended for heavy duty cleaning. I used this one, but anything with ¼ pipe thread will work. Cleaning and Deburring Tube Brush for Copper, 1/4 NPSM Male, 2-3/4"…
General: A replacement pedal for small electric scooter Why I designed this: I designed this to replace the rubber pedal that my son managed to lose Printing notes: Layer height: .15 Recommended Material: TPU Supports: Painted organic…
