Search results: came

Sort order

11,504 models

P
PrintablesCarter

Pi4 Case + FanCover w/Camera Slot

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…

Downloads
14,849
Likes
3,575
Rating
4.86
P
Printablesuamo

Laptop Camera Cover

Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.

Downloads
2,888
Likes
524
Rating
4.74
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Downloads
2,669
Likes
521
Rating
4.82
P
Printableslufa

1/4 inch nuts and bolts for camera and tripod

1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.

Downloads
2,189
Likes
325
Rating
4.64
P
PrintablesMakePro

Apple iPhone continuity camera mobile holder for Dell monitor

If you like my work please support me. :-) Buy me coffee at ko-fi.

Downloads
1,095
Likes
71
Rating
5
P
PrintablesDIY Machines

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…

Downloads
1,014
Likes
216
Rating
5
P
PrintablesvmLOGIC

Mini Tripod for smart phones and digital cameras

The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…

Downloads
862
Likes
174
Rating
5
P
PrintablesMaxx

WiFi Camera Wall Mount (Tapo C210)

I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…

Downloads
847
Likes
170
Rating
4.88
P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Downloads
846
Likes
52
Rating
4.5
P
Printablesjebowenag79

Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp

Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp This clamp allows mounting a camera or other device onto a nominal 1/2 inch (outside diameter) PVC pipe, widely available in the US. For the camera end, use a quarter-20 threaded bolt, widely…

Downloads
821
Likes
59
Rating
0
P
PrintablesmosuTech

Kobra 2 Pro/Plus/MAX C270 Camera mount

Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…

Downloads
705
Likes
74
Rating
5
P
Printablestakman29

KUMATY: Camera Polar Bears

Polar bears are into photography. Print with supports. Thanks:)

Downloads
656
Likes
202
Rating
5
P
Printableswerz 99

ESP32 Cam Pan and Tilt Camera

Case for ESP32 Cam Pan and Tilt Camera with Servo control. As you can see the rounded shape of the part case_cam_xl_+_support_tiltl.stl is not printed very pretty, so it might be helpful to add support. Detailed Description and Code:…

Downloads
586
Likes
52
Rating
0
P
PrintablesScotthon

Ubiquiti Unifi G3 Instant Camera Desk or Shelf Stand

The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…

Downloads
520
Likes
64
Rating
5
P

Real Bolts (For Articulating Raspberry Pi Camera Mount)

First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…

Downloads
488
Likes
112
Rating
4.59
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Downloads
441
Likes
75
Rating
5
P
PrintablesRyan Millar

Wyze Camera Mount for Prusa I3 MK3S+

This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…

Downloads
403
Likes
80
Rating
4.79
P
PrintablesChrisfu

Ring camera corner mounts

These camera mounts utilize the Ring mounting plate and screws to attach any Ring camera into a corner. Each mount can be attached to a corner using a single screw or by using double-sided tape.

Downloads
354
Likes
67
Rating
5
P
PrintablesNDS RnD

Camera Protector for iPhone 13 Mini

The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…

Downloads
344
Likes
24
Rating
5
P
Printablesbsfiosco

C920 Ball Joint Mount for Articulating Camera Mount for Prusa MK3 and MK2

This is ball mount joint for a Logitech C920 camera that allows it to directly attach to the ball nut from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2. This allows you to remove the standard mount from the C920 and…

Downloads
335
Likes
85
Rating
4.83
P
PrintablesAnheledir

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Downloads
330
Likes
47
Rating
4
P
PrintablesKhoi Pham

NC Miata Backup Camera Mount

This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon.…

Downloads
320
Likes
17
Rating
0
P
PrintablesTFL123

Blink Camera Mount

Original Blink Camera Base, and an Extendable and more adjustable Version from me. The Printed Version of the Base works like the Original. Printed Part needed: Base Blink Original Extended Verion needs one 3mmx20mm Machine Screw and a…

Downloads
293
Likes
54
Rating
4.67
P
PrintablesTheNore

MK3 / MK3S - Logitech C920 Z-Axis Camera Mount

This is a Remixed MK2 file. The Mounting arm and top have been modified to better fit the MK3 and MK3S. The part has also been stiffened up. Mount screw included. Print instructions Filament: Prusament ASA - Prusa Orange Layer Height: .20…

Downloads
285
Likes
17
Rating
4
P
PrintablesNils Kal

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System - mounted to standard painting rods

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…

Downloads
282
Likes
146
Rating
0
P
PrintablesMichal Pešek

Camera wrist strap for Peak Design

Print settings Material : ASA 0.15mm layer height 4 perimeters 20 percent infill 10 top and bottom full layers supports needed Strap: 20mm backpack strap Note: licence is the same like original model.

Downloads
259
Likes
46
Rating
5
P
PrintablesSorceress Lyra

Prusa Mini x-axis motor Raspberry Pi camera mount

I wasn't happy with many of the camera mounts for the Prusa Mini, so I designed one that I love! The camera is mounted on the x-axis motor with a customizable angle to suit your needs. The design is simple with 4 printed pieces and a…

Downloads
259
Likes
47
Rating
4.8
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Downloads
241
Likes
45
Rating
4.67
P
PrintablesUloPe

Voron 0.2 tophat corner camera mount

A mount to fix a 38x38 mm PCB camera into one of the corners of a Voron 0.2 tophat. The camera I used is an ELP 4K IMX317 170° Assembly I used 4 M2 self tapping screws to fix the camera to the mount and 2 M3x20 SHCS to attach the mount to…

Downloads
225
Likes
44
Rating
4.8
P
PrintablesKimframes

L-mount for Reolink and TP-Link Tapo IP-cameras

Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210

Downloads
221
Likes
23
Rating
5
P
PrintablesAsa

Blink Camera Slip Mount

I use these with blink mini (version 1) cameras. I have not tested them with the blink outdoor or blink mini version 2. Print with a brim and/or some glue stick to prevent the model lifting off the print sheet. Attach with screws or…

Downloads
197
Likes
29
Rating
5
P
Printablesabeaulieu

3030 Extrusion Adapters for Sneaks' Articulating Raspberry Pi Camera Mount

These parts enable mounting the Articulating Raspberry Pi Camera Mount on the base extrusions of the i3 MK3. Just print with default settings without any supports. I like to use a 0.15mm or lower layer height for better definition of the…

Downloads
196
Likes
28
Rating
4.5
P
PrintablesSteveW91

Stand for A9 Mini WIFI Camera

Stand for A9 Mini WIFI Camera

Downloads
195
Likes
15
Rating
4.5
P
Printablesbmccarthy321

Hikvision Camera Mount version 2

I wanted something a bit more compact for my cameras at my property. The cat5 goes right through the back of this box in through the wall. There's three screw holes for recessing screw to anchor. I added 8-32 screw fittings to hold the…

Downloads
190
Likes
21
Rating
0
P
PrintablesSushi

Camera Holder of TrueLife NannyCam H32 - faster print

Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…

Downloads
184
Likes
9
Rating
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Downloads
179
Likes
12
Rating
3
P
PrintablesAsh

BMCC / BMPC "Keystone" Camera Cage

Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…

Downloads
177
Likes
19
Rating
0
P
Printablesbrutella

HomeKit Camera

This is the 3D-printed enclosure of my open-source HomeKit camera . This snap-fit enclosure can be assembled without any screws. Hardware Raspberry Pi Zero W Camera Module Camera Cable compatible with Raspberry Pi Zero 5.1V micro USB…

Downloads
168
Likes
27
Rating
5
P
PrintablesHolck

Prusa i3MK3S+ Logitech C920 Camera mount

Compact mount for a disassembled Logitech C920 camera. Made tightly fit the newer model i3MK3S+ x-axis stepper mount/belt tensioner. Optional snap on cover is also included Print instructions Tested on upgraded I3MK3s+ with preset 0.20…

Downloads
164
Likes
48
Rating
4.67
P
Printablesj.e.hahn

Prusa Mini Camera Mount for Logitech C920

This is a mount based off of the following Thingiverse models: HeyVye's modular mounting system This c920 bracket This 2020/3030 extrusion bracket You will need to disassemble your c920. Perform steps 1-5 of the iFixIt C920 teardown ,…

Downloads
157
Likes
22
Rating
5
P
PrintablesIridium

Kryt kamery - Dome cover for the camera TAPO C210

Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…

Downloads
154
Likes
41
Rating
0
P
Printablesmscalora

Blink Mini Camera Window Mount

I needed to mount a Blink Mini camera to a window, the available models looked heavy and overdone so I whipped this one up in Fusion 360. I used a bit of double-back tape to attach to the window, holding so far. Tape on Amazon:…

Downloads
153
Likes
29
Rating
4
P
PrintablesHD_Creator

Tiny foldable tripod ecosystem for different action cameras

This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…

Downloads
150
Likes
17
Rating
0
P
PrintablesDaHouzKat

Logitech C920 Camera Mount REMIX

I changed my Raspberry Pi camera for a Logitech C920 so I had to make a new mounting bracket Note that i did not modify or create new components, i assembled some existing components to obtain a simple Logitech C920 Camera Mout for the…

Downloads
147
Likes
35
Rating
4.5
P
PrintablesJPIF

FLASHLIGHT MOUNT FOR REFLEX CAMERA

This mount is available in two versions: Pressure (with three different diameters) and to be able to attach an elastic band. Universal: it consists of one more part that is fastened with two M3 screws. Each part needs a small support…

Downloads
143
Likes
50
Rating
5
P
PrintablesRuffle

Hikvision Dome Camera mount

A mount for a Hikvision Dome camera with 111mm diameter base (several Hikvision cameras have this size base). I've included the Fusion360 CAD file so folk can alter it to suit. Category: Camera

Downloads
141
Likes
11
Rating
5
P
Printables3DHirn

Takeup spool fits Ihagee Exa camera

My Exa camera was missing the takeup spool, so I made my own. Printing Print with the dome faceing upwards and the hole facing the print bed. Requires some support.

Downloads
138
Likes
3
Rating
0
P
PrintablesMel

Blink Mini Camera Shelf for PLATSA

I only found PLATSA holders for Blink Mini cameras requiring a magnet or they don't fit the PLATSA hole spacing. So I designed my own camera shelf you can simply screw in. Print it with the face of the back plate down and you are good to…

Downloads
137
Likes
24
Rating
5
P
Printableslienmeat

AKK A11T 5.8G Micro AIO FPV camera mount

I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…

Downloads
136
Likes
10
Rating
0
P
PrintablesMartin

iMac 24 2021 Camera Cover LEGO

iMac 24 2021 Camera Cover for LEGO Filament ABS or PLA or PETG

Downloads
136
Likes
21
Rating
5
P
PrintablesVladoPortos

C920 Camera mount for Prusa Mk3

This is to mount C920 in better angle if you come from something like this: https://www.prusaprinters.org/prints/38920-c920-camera-mount-mk2-mk3smmu2 and don't have the bottom clip :D Remix of two models here: For Arm:…

Downloads
135
Likes
15
Rating
3.5

Ender 3 S1 Plus X-Axis Camera Support - Supporto Videocamera Asse X Ender 3 S1 Plus

On-Axis Camera Support for Ender 3 S1 Plus. The support is fitted and screwed onto the X-axis adjustment cover, robust, rigid, the camera remains firm and still. Printed in PETG Gcode file with all parameters for printing. Supporto…

Downloads
134
Likes
13
Rating
0
P
PrintablesVisualReversal

Ring Stickup Camera Drill Sergeant Hat

First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…

Downloads
132
Likes
23
Rating
0
P
PrintablesBartek Kolanko

Samsung S24 Ultra Camera Caps

💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…

Downloads
131
Likes
19
Rating
5
P
PrintablesFC2M3D

Universal Camera Mount for Prusa MK3/MK4 (Remix)

You can use this mount for every camera/webcam with screw mount. This mount is for Prusa MK3S, MK3, MK3S+, MK4, MK3.9, MK3.5, MK4S, MK3.9S and MK3.5S. I printed in PLA Camera mount and screw Infill: 15% Layer Height: 0.20mm Supports: No…

Downloads
128
Likes
16
Rating
0
P
Printablesmedyk3D

Logitech C920 camera stand

This is a simple Logitech C920 camera mount. You need to remove original holder from your camera, so you will lose the warranty. Base can be glued or screwed to your table so it can be placed really firmly to the ground. Camera is press…

Downloads
123
Likes
18
Rating
0
P
Printablescreativemario

G3/4" Screw Thread to 20mm Metric Conduit Coupler (UniFi Protect Camera Backbox / UACC-Camera-CJB and others)

We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…

Downloads
123
Likes
7
Rating
5
P
PrintablesEnder

Passive Camera Stabilizer

This is a passive stabilizer for cameras. It was made mostly to make smooth stable video. Most parts are printed in petg at 0.20mm. The stabilizer model is printed in pla at 0.15mm this is for a little extra give. If the dove tails don't…

Downloads
121
Likes
54
Rating
4
P
PrintablesHaggard

Prusa MK4 Camera Mount for Logitech C930 / Logitech C920

As an Remix from @ebeeche_158366 camera mount, I don't want toremove the foot of my Logitech C930. So I remix the camera arm, that it can hold a camera with tripod hole. Supports are necessary for one side. Please check the original…

Downloads
113
Likes
14
Rating
4.5
P
PrintablesEdu Altamirano

iPad/Iphone Pro Front Camera Mirror Adapter

So if you're a user of Heges or a 3D scanner that uses the TrueDepth camera you must hate how you have to hold the iPad towards the subject and not even being able to see it, well this will fix that issue, just place a 2.5mm mirror on the…

Downloads
113
Likes
6
Rating
0
P
PrintablesOndra

IP Camera EZVIZ C6C holder for cage

Mount / holder which I have created to mount my IP camera EZVIZ C6C to watch our guinea pigs when we are not at home. Really simple, works well, and also with really low filament consumption :) It can also be remixed for different…

Downloads
112
Likes
14
Rating
5
P
PrintablesYAKoholic

Kingroom kpl1 V2 camera mount for Logitech C270

Kingroom kpl1 V2 camera mount for Logitech C270 (Not sure if it will fit V1) you will need 2 screws M3 6mm 1 screw M3 18mm ****this screws was included with the printer**** I included the step file print setting 25% infill no support…

Downloads
112
Likes
20
Rating
0
P
Printablescristi.a.lupu

Raspberry Pi AllSky camera

Case to build AllSky camera using UnderWaterDome…

Downloads
104
Likes
18
Rating
5
P
PrintablesToM Havel

Hikvision - Corner Camera Holder

Materiál PET-G-bílý, výplň 50 %, vrstva 0,33 mm, cca 11 hodin tisku, užití - rohová instalace.

Downloads
97
Likes
7
Rating
0
P
Printablesc22dragoon

Raspberry Pi Camera Mount for Mk3S+ Remix

Remix of the awesome Raspberry Cam v2 mount for MK3S(+). When printed for the MKS3+ the camera position was a too low. Thanks to @fuchsr for providing the step file, I was able to modify the mount a little to adjust the camera arm angle…

Downloads
96
Likes
13
Rating
5
P
PrintablesJerrod H

Peak Design Mobile Continuity Camera Mount for 2021 MacBook Pro

A magnetic mount to adapt Peak Design's Mobile Case to an 16" MacBook Pro (2021) for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at…

Downloads
93
Likes
40
Rating
5
P
PrintablesFreycraft

Case for Raspberry Pi Camera Module 3 secured with screws

Additional parts needed: 1x Prusa-mini-display-box-with-raspberry-pi-zero-2 2x M3x10 hexagon socket head cap screws 2x M3 nuts

Downloads
89
Likes
4
Rating
0
P
PrintablesKarsten

Buddy3D Cameramount XL

Holder After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture) Camera mount Remove the support, drill out the holes…

Downloads
87
Likes
30
Rating
4.5
P
Printablesbpatrick

Eufy E21 Baby Monitor Camera Angle Stand

If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…

Downloads
82
Likes
8
Rating
0
P
Printables3DHippo

Generic Camera Model

I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…

Downloads
73
Likes
6
Rating
0
P
PrintablesCAPP_3D

Cinnado camera support on ender 3 s1

Cinnado camera support on ender 3 s1 15% gyroid filling. 2-3 perimeters. without supports. 2 screws, m3x10 plus thread 2 screws, m5x25

Downloads
71
Likes
15
Rating
0
P
PrintablesPat_S

Camera mount with screw for UNC 1/4" e.g. C920 / Kamerahalter mit Schraube für UNC 1/4" z.B. C920

Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar. Dimensions holder: Width 155.12 mm height 65,00 mm Depth 51,66 mm Dimensions screw: Diameter 25.00 mm…

Downloads
68
Likes
12
Rating
0
P
Printablesmscalora

Blink Mini Camera Mount Arm

I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.

Downloads
67
Likes
12
Rating
5
P
PrintablesmuJoseph

Ring Indoor Camera Suction Cup Mount

This mount interfaces with the plastic base plate included with the camera itself via three M3 screws and two nuts. The semi-circular slot on the base allows for the camera to be rotated slightly to either side of perpendicular to get a…

Downloads
66
Likes
10
Rating
0
P
PrintablesLivius

Raspberry Pi3A+ mount for Prusa MK3S+ with CSI camera port support

Inspired by xiphmont's implementation, I created my own files for the enclosure and pi3a+ frame for this update. Please follow xiphmont's guide to install the pi3a+ and perform the upgrade. The installation was flawless for me with the…

Downloads
66
Likes
19
Rating
5
P
PrintableskristofferMAKES

Remixed ball joint bracket for camera mount to Radiomaster MT12

I wanted to mount stuff to the top of my Radiomaster MT12 radio, either for filming and being able to operate the controller two handed (it takes practice!!) or just to mount an FPV screen. Or maybe both??!! Hey, I'm just providing…

Downloads
66
Likes
9
Rating
0
P
PrintablesStrankler

Huawei P20 pro Phone-Camera Mount for analog microscopes

I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…

Downloads
62
Likes
18
Rating
0
P
Printablesalvarezcabrera

Threaded rod remix to join "Screw Clamp" and "Articulating Mount" and "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2"

Added in the slicer the “ threaded-rod-120mm.stl ” and “ mmlink.stl ” parts of both projects (with some negative modifiers) to get a single part that allows mounting the screw clamp on the articulated joints. You still should get the…

Downloads
62
Likes
22
Rating
4.5
P
Printablesmkoistinen

Homekit Camera Case (HKCam)

I've started making some of the nice HKCams created by another user here https://www.prusaprinters.org/prints/1717-homekit-camera . The website for this project is here: https://hochgatterer.me/hkcam/ . His software is easy to install on…

Downloads
60
Likes
4
Rating
4
P
PrintablesMichal

Clear Camera View Legs for SYMA drones

Supported models: SYMA X8SW/X8SC/X8PRO/X8S-03 Original legs are universal, but because i had to rotate the pods in relative to the base of the legs, left and right versions are inevitable. I reccomended to use PETG or 98A TPU as a…

Downloads
59
Likes
1
Rating
0
P
Printablesmscalora

Quick Disconnect Blink Mini Camera Mount for Prusa MK3 & MK4

Mount a blink mini camera to the front of your Prusa MK3S+ and MK4 with removable section using dovetail. If the Dovetail is too tight, use a bit of sandpaper and it will free up nicely. I used PLA, any rigid material should do. I hang my…

Downloads
59
Likes
9
Rating
4
P
Printables_KaszpiR_

GoPro Camera Extender 220mm between holes

About: Remix of 3 GoPro Extensions Strong Ends by tmorris9 . took the longest one and then extended it length between screw holes is 220mm printable on Prusa Mini+ diagonally total size something under 234mm Please give a like and post…

Downloads
58
Likes
4
Rating
0
P
PrintablesToWcH

Unofficial Prusa XL Enclosure Camera

Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…

Downloads
57
Likes
29
Rating
4.5
P
PrintablesJordan Smith

Prusa Mini Horizontal ESP32 Camera Mount

Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…

Downloads
54
Likes
7
Rating
5
P
Printables_KaszpiR_

Multisensor ESP32-WROOM-32 NodeMCU with Camera hole and extended builtin antenna

About: Remix of Multisensor ESP32-WROOM-32 NodeMCU ESPresense by teaser : Added camera hole (10mm hole) Expanded area for extended builtin wifi antenna on modern nodemcu boards that protrudes outside of the dev board Wider hole to connect…

Downloads
54
Likes
1
Rating
0
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Downloads
53
Likes
24
Rating
0
P
Printablesdocbimtom

PRUSA MINI 3in1 XIAOMI YI CAMERA + LED LIGHT LAMP HOLDER + Z-AXIS COVER

Based on my past design, the Prusa Mini z-axis mount for YI HOME CAMERA : https://www.prusaprinters.org/prints/74970-xiaomi-yi-home-google-nest-camera-mount-prusa-mini I want to upgrade the mount to hold more stuff, which is LED Keychain…

Downloads
52
Likes
12
Rating
5
P
Printableskuchar

Prusa CORE One Camera enclosure for Wyze Cam v3

Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…

Downloads
50
Likes
23
Rating
5
P
PrintablesRuda

Camera Arm for 1:43 Car Model Simulation

This 3D model is designed specifically for professional filmmakers who wish to simulate camera arm movements with a car before actual shooting. It's tailored for 1:43 scale SUV model cars. Simply print it out and assemble the pieces using…

Downloads
47
Likes
10
Rating
0
P
Printablesbmccarthy321

Hikvision Camera Mount

We've had a few issues around the house with cars driving through the back fence, people opening the car doors and stealing change, and some knuckleheads shooting guns off on our quiet, normally peaceful little street. As such, I had a…

Downloads
46
Likes
5
Rating
0
P
PrintablesCrocmagnon

Prusa enclosure camera angle mount

Mount in top front angle with two M3 screws and nuts, M4/M5 bolt to join the case to the mount. Compatible camera case is available here: https://www.printables.com/model/801363-esp32-camera-case No auto-generated supports are necessary,…

Downloads
43
Likes
4
Rating
5
P
PrintablesSkeletalPrints

Prusa i3 MK3 / MK3S Camera Mount Extended + Allen Key Holder

Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe

Downloads
42
Likes
7
Rating
5
P
PrintablesDoriann

Ultimate Prusa Larger Camera arm

This was just a very quick remix so it could fit on the Ultimate prusa casing. I needed a longer arm for my camera.

Downloads
40
Likes
10
Rating
0
P
PrintablesRealPrint

Mount for an SQ11 camera on a model railway. / Halterung für eine SQ11-Kamera auf einer Modelleisenbahn

Mount for an SQ11 camera on a model railway. The SQ11 can be used as a webcam under Windows and thus provide a live image. Halterung für eine SQ11-Kamera auf einer Modelleisenbahn. Unter Windows kann die SQ11 als Webcam genutzt werden und…

Downloads
40
Likes
8
Rating
0
P
Printableswerz 99

Core One Camera Case for ESP32-CAM

Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html

Downloads
38
Likes
8
Rating
5
P
PrintablesRolf

Reolink E1 Zoom Camera mount for Prusa Core One

I had a Reolink E1 Zoom lying around and needed a camera with a wired connection for my Core One, this is the result. It mounts to the front left corner. The mount requires either eight 6×2 mm magnets or four 6×4 mm magnets. That’s all…

Downloads
38
Likes
6
Rating
0
P
Printablesnyknyc

Blink Mini Camera Mount for Ender 2 Pro

Squeeze the small protruding part of the mount (I used Prusament PLA) into the spool holder. You can glue the platform to the mount, but I didn't. If you have any suggestions or questions please let me know. Update: I added a reinforced,…

Downloads
37
Likes
5
Rating
0
P
Printableskilldaclick

Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure

Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure The camera can be mounted on the right side of the Prusa Enclosure using the original camera mount holes. Simply place the camera on the mount and rotate it clockwise. This…

Downloads
34
Likes
9
Rating
4
P
PrintablesWetdesign

Bontrager Helmetplate for action camera & Ledlenser MH5

Print it on its side to get the clips stronger, using support everywhere. Filament ASA and layer thickness 0.20mm. I used nozzle size 0.4mm. I have a separate file for matching fixture for a Ledlenser MH5 light with flex-brake-bad, an…

Downloads
32
Likes
3
Rating
0
P
PrintablesEddy The Wizard

Hue Secure Camera Fixture

Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB

Downloads
30
Likes
9
Rating
0