1,120 models
Simple, sturdy case for an external BlueSCSI DB25 v1.1. Requires two m3x10mm socket cap screws, but 8-11mm long should work as well. Exposes the SD card slot but hides all the other things. They’re inside if you need them! Print with the…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Stackable boxes/rack for WD elements external hard drive or similar drives. The stand holds everything at 15° angle for better airflow. Print with .3mm layer hight to save some time. Easy to permanently fix together with some glue.
Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
MK3.5S / MK3.9 / MK4 / MK4S external display support IKEA Lack Enclosure Especially designed to detach the xLCD and use it ina stand alone configuration. It fits to the original screws hole, to ensure perfect compatibility with no…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter. You need some support material to print the holder (please see the attached pictures). The holder is designed with Fusion…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
The UFix System External fixation is a common technique for treating bone fractures , however commercially available systems remain prohibitively expensive and reliant on complex supply chains, which causes significant challenges in…
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
We had during summer time a lot off issues because of overheating. So i designed an easy Mounting Fan Housing with 24V DC Fan. Originally that equipment is passivly cooled over Steel Housing. Once printed the cover, I tool a heat gun…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Today I designed a T-shaped adapter that plugs into the AMS on one side, the external spool holder on the other, and routes both into the hotend input . While you can still only load one filament at a time , this splitter removes one of…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Update: I made a better autoretracting system. This Airbuffer was not reliable enough. Please consider these files as obsolete/discontinued. But if you find this useful in any way or other projects you may use them anyway. That’s why…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
My recreation of an old PC water cooling external radiator mount, Inspired by the Swiftech "Radbox" MCB-120 It's made of a two part construction, the holding plate and housing for ease of installation with multiple slots for vertical and…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This adapter allows a high-capacity battery, such as f.e. Li-Poly 4000 mAh, to be connected to a DualShock 4 controller. The high-capacity battery provides extended gameplay for several days. Since the battery cannot fit inside the…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
6 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
An improvement on my original design, a 9 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!6 minute print. quick and useful little…
Made this hard drive case to compliment my Orange Pi 3 LTS case. The cable I use with this is a Startech SATA to USB 3.0 adapter. While not a rugged case. It's more or less designed to add a little bit of protection while this Pi and HDD…
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. External HDD max dimension (LxWxH): N/A…
Rack/stand for 4x 3.5" HDDs. Print one for each side. I used fairly standard hard drive screws, found in basically any computer hardware store. I added a flattened version to print laying flat, inspired by BrewKnell's make, which shortens…
Feb 21, 2024 UPDATE: Made the joints a little bit tighter so they are not so loose. Dec 16, 2023 UPDATE: Made a version where no hardware was needed and changed the angle of the slots where the monitor sits so there is more angles. The…
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
I made a holder for the wooden slats on the terrace.
Case for HAMTYSAN 7 Inch Portable Monitor External Display 800x480 for: https://www.amazon.com/dp/B0B8S9DYQC Legs used also as a harness for Raspberry Pi 4 Model B case, from here: https://www.amazon.com/gp/product/B07D3S4KBK
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. Fixed the wrong model in the files.…
External Filter / Scrubber for the Qidi Q1 Pro consists of three parts: Mount Base, Hepa Box Activated Carbon Box. The design includes rails that allow for easy removal of both the HEPA and Carbon boxes without the need for any screws.…
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
This is a stackable rack for external HDDs. The body can be printed multiple times, stacked on of each other with a dowel joint and covered with the cap. The ribs under the HDDs raise them and the holes on top, bottom and sides provide…
I designed this eGPU enclosure specifically for the ADT-Link UT3G, the Power Color Fighter RX 6600, and the FSP Flex Guru 300w PSU. I know this is very specific, but I was asked to share. It was designed in the free version of SketchUp,…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
remix from 6.5 inch rack External 2.5 Hard Disk Cage for 10 inch 1U still mainly design for external hard disk so i keep old tray to use in this one have space left and i dont want it waste i create half size tray above half size tray…
This part allow to hold your external hard-drive cable. You need this part and a rubber band. Simple and efficient.
Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…
UPDATE:03.12.2022 Added a version for people with wider faces as some still experienced to much pressure from the blocker on their heads temple area.…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version (Cults3D). Added a new option with hole for HDD. Fixed the wrong model in the files.…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports. I added a revised model name…
Add extra space to your DELACK with this skirt print! Contains an option for an external LCD mount! PLEASE REMOVE ALL OF THE ZIP TIES FOR THE LCD CABLE UNDER THE PRINTER, OR THE CABLES WILL NOT BE LONG ENOUGH TO REACH THE LCD! If you are…
Info An external optical drive bay because no modern case has an internal one :). Usefull if you want a cheap BluRay drive that you can connect to different devices. You'll need a sata to usb adapter to be able to connect it with a usb.…
Simpler 3.5" Floppy Drive or Gotek Flash Floppy drive case for the Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Should also suit Amiga 500's and other…
One of my Ford Ranger's tub hooks lost its cover and I decided to not purchase a replacement, but rather took another one off and modelled a replacement part. Print file included - I used Charcoal PETG and carefully removed the support…
Slightly remixed case for a ESP32 with external antenna (works great with ESP32-WROOM-32U). I have messaged the original author and he's OK with posting new model. Added ventilation holes on both sides and modified the lid, which is now a…
This is an enclosure for my external GPU. I wanted to protect the GPU and clean up the look using a TH3PG3 GPU Dock. I designed it around a Nvidia RTX 3090 Founders edition but it would likely work for many other GPUs. The back lid has a…
Hi Internet Retro Gamers, If you're like me and love retro gaming on the Wii... You've probably got an external HDD/SSD just sitting on the side of the Wii. I was tired of the HDD sliding off the back of the table, so I made this little…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
I got inspired by the “https://www.prusaprinters.org/prints/63672-ps5-controller-clip” and made a similar holder for the external harddrive. I printed mine with a 0.6 nozzle at 0.4 layer height.
Uma simples tomada externa para facilitar a intalação de uma tomada em qualquer lugar que você precise, RECOMENDO na hora que colocar os 2 parafusos, coloque-os com calma na primeira vez para NÃO quebrar a parte interna do furo e NÃO…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version ( Cults3D ). Added a new option with hole for HDD. External HDD max dimension (LxWxH): N/A…
It needs to be printed on SLA resin printer. FDM not tested.
My printer settings: Filament = ABS Layer hight = 0.2mm Infill = 16% Support = no Wallcount = 4 Material: 1x ATX Power Supply 1x Used Oculink PCB: cablecc 4X OCULINK (…
Allows you to turn the esc on and off with the body on, uses the esc mounting holes, and a spare 3mm screw. More info to come. Update 8/21/17: Thickened the rocker in places, noticed the key could slide past the rocker and into the body,…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
This version of the GEN2 Rail allows cable routing for an externally mounted Prusa MK3 LCD Control unit, it replaces the centermost GEN2 rail and allows clearance for storage solutions such as the GEN2 Modular Lack Enclosure Drawers and…
https://en.wikipedia.org/wiki/British_Standard_Pipe This is for common British Standard Pipe (BSP) or G style pipe threads for checking either male or female threads. There are two separate gauges for checking smaller or larger threads.…
Mount your 120mm fan on the back of your enclosure with a HEPA filter CLICK HERE FOR THE ASSEMBLY GUIDE
I’ve had an external HD connected to my upright PS5 for a while, and it’s always bothered me how precarious the connection was - it either had to be sitting on the floor, or draped over the top. As you know, if the HD disconnects while…
Je n'ai pas trouvé de solution plus simple pour brancher mon alimentation sur mon boîtier SNAPMAKER A350. J'ai également modélisé une version qui se fixe sur la partie inférieure de l'enceinte, mais je ne l'ai pas encore testée.
Continuity Camera is a great new feature for the iPhone, allowing you to use your phone as a webcam with super picture quality. Here's a universal phone mount to use your iPhone and Continuity Camera with any external monitor. The monitor…
Due to the limitation of the spool dimension on the Flashforge Finder, I have decided to design an external spool holder. Every 1kg of filament could fit with this design. Every part on this design can be print with the Flashforge Finder.…
Assembly Instructions Set the ferrite core in the holder. Fasten from the back of the frame with screws. To mount the holder you will need the following fasteners: M3x8 screw (2x) Print Instructions print settings: 0.30mm DRAFT filament:…
Summary Hello Printables community! I'd like to share a practical modification I've developed for the original filament spool holder design. This external filament holder is designed to reduce vibrations caused by the filament spool on…
As I couldn't find a matching SSD enclosure to accompany my PS5, I naturally decided to design one myself. The case specifically fits an SSD connected to a Sabrent USB 3.1 to SATA connector. I included an stp file for people wanting to…
Wenn die Höhe für das Aufstellen des Druckers begrenz ist, muss die externe Spoole auf den Boden oder an die Wand. Hier eine Halterung mit der ihr die externe Spule auf dem Boden oder der Wand befestigen könnt. ________ If the height for…
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…
This modification allows for the use of an AMS Lite rotary spool holder on the Bambu A1 Mini external spool holder. Simply remove the stock spindle by depressing the catch locking the spindle to the arm (see last photo). Insert new…
Raspberry Pi 4B Case with cooling fan, power button, LED, external I/O connector and Pi Camera slot This is a small case for the Raspberry Pi 4B. It provides lots of cooling and enough I/O to control my 3D Printer. Edit 2022-12-20:…
This is an update of the cd/dvd case by mebs ( https://www.thingiverse.com/thing:4409017 ). I've added brackets for the SATA/USB adapter PCB and the USB connector on the rear. In addition, all the screws have been modified to use recycled…
The main body has areas that can be glued and the the pi becomes somewhat structural once installed without the covers. The electronics cover has new little tabs for m3x12 or longer screws to hold it together.
Modular external hard drive stacking system with dimensions that fit popular 2TB/4TB portable drives. I can confirm that the large tray fits a 4TB Seagate Backup Plus and the small tray fits a 2TB Seagate Backup Plus Slim or a 2TB WD…
Adapter for mounting external camera flashes with hot shoe connector on generic camera tripods. Supports classic 1/4" screw connection but also Arca Swiss-like quick release systems, including Peak Design's Travel Tripod. Also features a…
Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…
Just another Y-Splitter for the Bambu Lab P1 and X1 Series it is to be used with PC4-M10/MF10 connectors i designed this model since none of the available models 100% satisfied my needs and i needed some stable solution for external…
A simple remix to hang an 2.5" HDD enclosure on a Skadis board
Just a simple way to keep your external hard drives in one place. Store your hard drives horizontally or vertically. Stores three of them. To check the fit before you print, each slot is 85mm x 15mm
This print was created to allow users to mount their Ender 3/Ender 3 Pro LCD externally using some of the extra fasteners and cables from our Universal 3D Printer Enclosure Kit. IMPORTANT: You must print both Arm A and Arm B (they are not…
Seagate External Hard Drive storage container. also has a spot for storing the USB cable. There is a hole in the back of the unit to access the port while keeping the drive in place.
Checkers pieces have a habit of getting lost so secure them in this container! Note: Not really a remix as its a new design but it was built to complement the model here so I added it as a remix so its easy to find for people. Print…
Update 2024 - 2: Added STL files with rounded edges Increased HDD height spacing to 15mm. Update 2024 - 1: Model Update from the Parametric Version (Cults3D). Added a new option with hole for HDD. Fixed the wrong model in the files.…
Thats an external cooling for my v0. But it should also work with many other printers where the printhead doesn't move in z direction. Probably not the strongest cooling, but it fits into a v0 with panels attached. In addition to those…
Original external prime bucket is made to be held in place by spoolholders. These prints ads magnets to snap to the right side panel. This version is NOT Prusa original extended bucket but with magnet. It have different dimensions, as I…
Overview The Bambu Lab H2D specialises in printing soft TPU, but the spool must be mounted above the printer and fed through the top with the lid removed. There isn't really a good way to achieve this, so I designed a simple system to…
Re-mixed to suit a Standard 3.5" Floppy Drive or Gotek Flash Floppy drive connected to a Tandy 1000 EX or HX via my "External Floppy Drive Cable Kit" + 3.5" or Gotek or "External Drive Adapter" available on Tindie. Cable Kit:…
An external spool holder for Flashforge Finder 2 3d-printers which attaches to the back metal plate with the integrated spool holder removed. I've designed it for my Finder 2 but think it will also fit Finder 1. Print it in the same…
This spool holder is made to go on the outside of a Flashforge Adventurer 3. This allows you to use third party spools of filament. You will need two 608 ball bearings for the roller to complete this build. Print the spool holder parts.…
External HDD holder V1 and V2 (NO SUPPORT NEEDED) 6 x External HDD Holder (Rack) 8h 28m, 93g for MINGDA Magician X2 The model is with cooling holes! Will be nice who can donate :) for my filaments :) YHANKS!…
After using another steam controller battery cover with external dongle and having multiple breaks, I looked at where I could add material and make other changes to make the injection-mold optimized original CAD file more suitable for…
A stand for two external monitors (brand Arzopa). There are two versions of the upper parts: straight and tilted. The tilted one is 10 degrees tilted. The extra holders can be used, but it's not necessary. Link to the post .
hard drive rack for the cheap Chinese 2 1/2 inch hdd enclosures. will have more pics soon. please show me your makes!!! enclosures like this-----…
This remix makes it so the LCD controlbox sits 1.5mm higher to allow the LACK drawers to open (when also using the drawer spacers ). Raising it by 1.5mm is enough to allow the drawers to open under the LCD controller, but still sits below…
I have an Ikea Lack enclosure V2 for my MK3S+ with MMU2S. After building a RMU MK3 I wanted to mount the buffer on the outside of the case. I didn't find any (good) solutions on the internet. So I made my own. The buffer can be found here…
i made cover for external fan for X,Y stepper driver for snapmaker U1, thaht allow instal noctua 40x40x10 mm 5V fan from noctua without printer diesasembling. Fan is powered from USB port of U1. Fan is blowing air to inseide U1. Printed…
ESP32 Case for the model with external antenna. I made a longer version so i could manage the cable of the UFL Connector to the antenna. I relocated the pin holes. The original didn't fit to my esp32 ext antenna version. The mounting hole…
DESIGN INSPIRATION The Qidi X-CF Pro printer comes with a dry box for hydroscopic filaments such as Nylon. Unfortunately the dry box mounting system provided by Qidi requires at least 350mm of additional space behind the printer. The…
Inspired by Youtuber @makerunit's ITX PC design , I designed an enclousure specifically for ADT Link UT4G board. Main features: 3 slots GPU with 392mm length. (PNY 5080 as in the photo) and full size ATX PSU. All parts fits in 235x235…
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
![Stand for two external portable monitors [Stojan na dva externí monitory]](https://media.printables.com/media/prints/425235/images/3517722_aa61c70b-8f0d-4d31-91d5-0d99a8df5354/49_19.jpg)
