Search results: raspbe

Sort order

7,132 models

P
PrintablesSneaks

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27,813
Likes
6,270
Rating
4.9
P
PrintablesRobert

19" 1U Rack with Moduler trays for Raspberry Pis

This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,147
Likes
828
Rating
4.84
P
PrintablesRonnyS

7" Touchscreen case for Raspberry Pi 4 + internal fan

Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,810
Likes
483
Rating
4.92

Raspberry Pi 3 Sleeve case

2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,458
Likes
243
Rating
4.84
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,398
Likes
714
Rating
4.8
P
PrintablesCarter

Case for Raspberry Pi 3b+ and SenseHat

Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…

Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant

Downloads
2,388
Likes
233
Rating
4.97
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,107
Likes
685
Rating
4.81
P
PrintablesCarter

Raspberry Pi 3B+ Case for Noctua 40x10

Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…

Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant

Downloads
1,491
Likes
176
Rating
4.94
P
Printablesthe freewheeler

Raspberry Pi Z-Box | Integrated 3B/3B+ Case for Prusa MINI

RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…

Print approx. €6.61–€8.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,351
Likes
261
Rating
4.9
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,179
Likes
287
Rating
4.97
P
PrintablesCarter

Raspberry Pi 3B+ Case HexVent

Vented Case, SnapTop... This case is built for a cooler CPU when active cooling is used... derived from the need to cool the Pi 4B, The case requires a fan for significant cooling. This case will not cool the sbc by itself, but the…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
1,171
Likes
123
Rating
4.64
P
PrintablesWilko

Raspberry Pi 3B Sleeve

This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…

Print approx. €2.90–€3.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,055
Likes
79
Rating
4.94
P
PrintablesRojikku

Raspberry Pi Touch Display 2 Case

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…

Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant

Downloads
915
Likes
42
Rating
4.5
P
PrintablesGeorgeRaven

RavenPi; Raspberry pi 4 case

A slim, functional, openSCAD raspberry pi 4 case. I would recommend also printing a fan cover for any attached fans or just for style as there is a hole by default for the fan. This can of course be disabled by commenting out its…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
629
Likes
29
Rating
4
P
PrintablesAlastorsNight

Raspberry Pi4 case for Prusa MK3 - Remix

A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
508
Likes
103
Rating
4.89
P
Printablespedrolamas

Raspberry Pi Zero 2 W screwless slimest case

Just a really slim screwless case for the Raspberry Pi Zero 2 W

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
374
Likes
40
Rating
5
P
PrintablesSodium_Hydrogen

Ender 3 Raspberry Pi 4 Mount

This is a remix I used the original with my PI 3, but it wasn't compatible with the PI 4. I've re-drawn the lowerpart_V2 to make it compatible with the new port layout. It easily slides into the rails on the Ender 3. The case can be…

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
370
Likes
25
Rating
5
P
PrintablesTobi042

Raspberry Pi 3 toolless clip-on case Prusa i3 MK3/S

This is a modification of the Raspberry Pi sleeve case by Tobias Christensen. It has a clip attachment that allows you to attach it to a 30mm v-slot aluminum extrusion such as on the Prusa i3 MK3/S. Since it's a sleeve case and just…

Print approx. €3.63–€4.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
337
Likes
62
Rating
4.88
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Print approx. €4.39–€5.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
288
Likes
41
Rating
4.83

stable Diamant Edition Case/Box incl. Stand for Raspberry PI 3b with applied 3.5" LCD Display (plus option for fan or sensehat)

Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…

Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant

Downloads
282
Likes
28
Rating
0
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
67
Rating
0
P
PrintablesMartin H

Octoprint Box - Raspberry Pi 4B, Waveshare 4.3" DSI

This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…

Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
46
Rating
5
P
PrintablesZahg

Raspberry pi 3B+ case for 3030 beam (Octopi)

A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.). An optional cable guide for the pi-cam cable. No screws needed. Everything snaps together.. There are holes to attach the Raspberry to the bottom part using…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
271
Likes
50
Rating
4.82
P
Printablesthe0bone

Prusa MINI Raspberry Pi 3b+ Cover

Many thanks to Joe for the inital publishing of the case for the Pi3. The 3b plus have some parts at different places as well additional connectors. I updated the cover only. The buttom remain the same from Joe. It fits 100% and very…

Print approx. €0.67–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
212
Likes
23
Rating
5
P
PrintablesPillar

Raspberry Pi 4B Case with Noctua NF-A4x20 5V Fan

Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
205
Likes
25
Rating
5
P
PrintablesToWcH

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
15
Rating
5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
55
Rating
0
P
PrintablesSimon Jolmers

Raspberry Pi 4 B Case and sonoff 3.0 - Home Assistant

A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.

Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
17
Rating
4
P
Printableswhimmel

Raspberry Pi 5 Breadboard Case

Same as the original, but with some relief for the power button.

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
15
Rating
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
10
Rating
0
P
PrintablesFalco

Raspberry Pi4

Filament : Devil Design. Green Transparent. PETG 0.20mm. 20% Infill: Honeycomb. Nozzle 230c. Bed 70c. Support : None.

Print approx. €4.48–€5.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
14
Rating
4.5
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.2 with changeable ventilation grid or fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
103
Likes
12
Rating
0
P
Printablesfivesixzero

Case for Arducam UC-733 Raspberry PI HQ Cam USB Adapter Board

A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
99
Likes
12
Rating
4
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Top plate)

The switch plate to a small Raspberry Pi Pico powered keypad. Switch holes are sized for Kailh switches, similar sized ones should fit. This keypad is designed to fit four M3x10mm socket head bolts and four M3 nuts. The bottom case…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
13
Rating
0
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Bottom case)

The case to a small Raspberry Pi Pico powered keypad. The case has a mounting point for a Raspberry Pi Pico where two pegs can be squished with a hot metal object securing the Pi Pico. This keypad is designed to fit four M3x10mm socket…

Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
13
Rating
0
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.0

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
2
Rating
0
P
Printablesgillis

CCTV Housing for Raspberry PI

Late Add: an alternative Cord lid, one with only hole for the AC cord If the Housing will be sun exposed then print with PETG PLA will be deformed. The plate, where to mount the raspberry pi has screw holes for RPI-2/3/4 and for RPI-Zero…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
16
Rating
0
P
Printablesblitz4u

Raspberry Raspiblitz Case V1.1 with and without fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
9
Rating
0
P
Printablesgpokhark

Portable Hacker Box - Kali Raspberry Pi 4 Caddy

I successfully implemented Kali Linux on a Raspberry Pi 4 and took it a step further by installing a vncserver and establishing a Wi-Fi access point for remote, monitor-less GUI display. This transformed my Raspberry Pi 4 into a highly…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
28
Rating
0
P
PrintablesJoel

Raspberry Pi case for Lack enclosure

This case for my Octopi mounts to the back of the Lack enclosure. It has openings for USB-C and one of the USB-A ports, the SD card, camera ribbon cable, and a cooling fan. I also printed a set of Lack enclosure parts for the right side…

Print approx. €4.96–€6.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
10
Rating
0
P
Printablesfluffy0026

Raspberry Pi4 case for Prusa MK3/S/+

Raspberry pi 4 case for use with Prusa MK3/S/+ Camera cable hole Indicator lights Windows for status lights. Easy to print: no supports needed. To use, download the bottom case from WDR and mount using 2 X M3x10 for mounting to printer…

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
12
Rating
0
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
15
Rating
5
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
24
Rating
0
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Print approx. €4.55–€5.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
2
Rating
0
P
PrintablesByteSlinger

RaspberryPi 3B Case with 30/40mm Fan- Prusa Mk3 Mount

This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere. It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other…

Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
6
Rating
0
P
Printablesxanderthol

Raspberry Pi Zero Stack Plate

I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
PrintablesDan Rogers

Attractive case for Eleclab 7" Rev C screen and Raspberry Pi

Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
35
Likes
3
Rating
0
P
Printablesh0rsty

Raspberry Pi Camera V2 Mount for Ultimaker 2 or 90° Corner

Model V1 has no outlet for the camera cable on the bottom side. Model V2 has another outlet for the camera cable on the bottom side.

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
5
Rating
3
P
PrintablesTache

Prusa Mount for Squirrelbrain's Raspberry Pi Cases

This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
5
P
PrintablesFuseFusion

Case for LD2410 and Raspberry Pi Pico W

I recreated the STL files in Fusion 360 and modified them for the Raspberry Pi Pico W. Additionally, the logo is now suitable for multi-material prints. With the type settings in PrusaSlicer, it can now be printed in any configuration.…

Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
0
Rating
0
P
PrintablesPetr Šlachta

Raspberry pi 4b case with SSD drive slot

Modification of original Malolo's screw-less Raspberry case - “Bottom_Base_SM” with additional slot for SSD drive's PCB ! Make sure to adjust the pillars spacing to fit the holes of your PCB ! Instructions: Pop open your SSD drive and…

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
3
Rating
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
5
Rating
0
P
PrintablesMartin Brechtl

Higher Box for Raspberry Pi Compute Module 4 IO Board, upper part replacement for WaveShare WS-19195 box

If you want / need use CM4 with PCIe TO M.2 Adapter Pi Compute Module 4 (WaveShare WS-19091) in WaveShare WS-19195 box - you will find that you cannot close original box. This was reason that I created new higher upper part replacement…

Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
1
Rating
0
P
PrintablesPea Prog

-- OUTDATED -- Raspberry Pi Zero minimal flat case with LED indicator hole & rubber feet indents.[Remix]

THIS MODEL HAS BEEN REPLACED WITH A NEWER EDITION. THE FOLLOWING IS ONLY FOR REFERENCE PURPOSES. The update version can be found here . This is a Remix of the amazing Raspberry Pi Zero minimal flat case by Skov Knudsen Inventions. It has…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
1
Rating
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
Printablesinvisiblefmx

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
3
Rating
0
P
PrintablesCrami

Raspberry PI 4 Holder for Prusa Enclosure

A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
2
Rating
0

Raspberry PI Kamera Linsenschlüssel

Zum scharfstellen der Linse brauchen einige Modelle einen kleinen Schlüssel.

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
1
Rating
0
P
Printables3ric74

Ball Mount Raspberry Pi4 Kit Labists

J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
1
Rating
0
P
PrintablesMunich3DThinker

Raspberry Pi Radio Case

Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
3
Rating
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell U2412Mb Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
4
Rating
0
P
PrintablesPetrusJPrinsloo

Case for Raspberry Pi 5 with 4.3inch HDMI LCD (B) 800x480

I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out. The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS -…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
1
Rating
0
P
PrintablesVorpal

Adapter from Raspberry Pi 5 case to NVME SSD hat

Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
3
Rating
0
P
PrintablesIcegianter

Cover for Raspberry Board

Dimensions: 105 mm x 100 mm x 46 mm Parts Included: Raspberry board cover Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…

Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesRoman Huante

Raspberry Pi and Adafruit Perma-Proto Board Case for Prusa i3MK3

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…

Print approx. €9.25–€11.31 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesAndiPrusa

Tischhalter für Raspberry

Halter für Rsapberry, kann an eine Tisch/ Rohr mit einem Durchmesser von 40mm befestigt werden. Befestigungsschrauben/ Muutern M3

Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
0
Rating
0
P
Printablesmrd_xy

Raspberry Pi + Relais Holder DIN Rail 35x7.5mm

Raspberry PI and Relais Holder DIN Rail 35mm x 7.5mm Holds a Raspberry PI 3 b (other Models may fit too) Holds a Arduino/Raspberry PI Relais Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution: 200…

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
Printableshjembaek

Raspberry Pi 5 Extension for the Mainframe z16 and z17 Modular Case

⚠ Requires the: Mainframe z17 Modular Case (Free) or Mainframe z16 Modular Case (Free) for full functionality 🔌 Raspberry Pi 5 Extension for the Mainframe z16 and z17 Modular Case This extension pack is designed to make the Mainframe…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Likes
7
Rating
5
P
PrintablesStamos

Raspberry Pi 5 case

This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…

Downloads
23,462
Likes
1,686
Rating
4.9
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Downloads
22,705
Likes
5,392
Rating
4.92
P
PrintablesStamos

Raspberry Pi 3/4 B+ Case

This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…

Downloads
22,231
Likes
1,963
Rating
4.89
P
PrintablesPrusa Research

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Downloads
14,276
Likes
609
Rating
4.89
P
Printablespyrho // 25.wf

Raspberry Pi 5 Case (snap fit)

This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…

Downloads
13,532
Likes
1,143
Rating
4.9
P
PrintablesPyro_Industries

Raspberry Pi 4

Print or use to make new things

Downloads
13,228
Likes
210
Rating
5
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Downloads
12,788
Likes
2,251
Rating
4.96
P
PrintablesSquirrelbrain

Raspberry Pi 4 Case

NEW Updated version here: Raspberry Pi 4 Case U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu…

Downloads
9,462
Likes
2,259
Rating
4.8
P
PrintablesPyro_Industries

Raspberry Pi 5

Print or use for making other models

Downloads
9,294
Likes
209
Rating
5
P
PrintablesNikolica

Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)

🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…

Downloads
9,101
Likes
604
Rating
4.87
P
PrintablesMarius

Slim Raspberry Pi Zero W Case

24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…

Downloads
8,755
Likes
1,067
Rating
4.85
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands

There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…

Downloads
8,269
Likes
1,209
Rating
4.95
P
PrintablesMicro Center

Raspberry Pi 5 Case W/Power Button — V2

Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…

Downloads
6,880
Likes
282
Rating
4.74
P
PrintablesJayCee09

RaspBerry Pi 4 case

A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…

Downloads
6,544
Likes
184
Rating
5
P

Appleberry G5 - Raspberry Pi 3B / 4B in Apple Power Mac G5 case

Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…

Downloads
6,341
Likes
2,341
Rating
4.88
P
PrintablesBasementCNC

Raspberry Pi 5

Its the best i could model it, diamensions based on the chips and parts built into the new 5, board based on the old 4

Downloads
6,166
Likes
73
Rating
0
P
PrintablesHenry Levesque

Raspberry Pi Zero 2 W

A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.

Downloads
5,869
Likes
77
Rating
5
P
PrintablesSquirrelbrain

Raspberry Pi 5 Case

U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu Components link for all fixing listed above.…

Downloads
5,633
Likes
1,347
Rating
4.71
P
PrintablesLinas 3D

Raspberry Pi 4 case

2025-06-07 - Added case file with no logo Remodelled raspberry pi 4 case from microcenter.com and updated by my liking. More ventilation micro SD card adapter slot Cutout for LEDs Tighter tolerances for tighter fit. Print instructions…

Downloads
5,349
Likes
398
Rating
4.84
P
PrintablesGeorge

Raspberry Pi Pico Case

A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…

Downloads
5,288
Likes
596
Rating
4.97
P
PrintablesSquirrelbrain

Raspberry Pi 3 B + Case

U will need: Case - M2.5x10 self tapping screws X8 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 No supports are needed for this design. Red faces can be…

Downloads
4,999
Likes
998
Rating
4.84
P
PrintablesDocWeebl

Raspberry Pi Camera Mount - Camera Module 3 Version

A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…

Downloads
4,981
Likes
390
Rating
4.85
P
Printablesluc.e

Raspberry Pi 7 Inch Touchscreen display case

Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…

Downloads
4,412
Likes
375
Rating
4.68
P
PrintablesDocWeebl

Raspberry Pi Camera Module 3 / V3

Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…

Downloads
3,969
Likes
64
Rating
5
P
PrintablesParallel

Haven – Case for Raspberry Pi-Based MANET (by Parallel × MorosX)

[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…

Downloads
3,751
Likes
431
Rating
5
P
PrintablesNikolica

Raspberry Pi 5 case with M.2 NVME SSD HAT support, custom top and power button (UPDATED v1.3) pi5 rpi5

First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…

Downloads
3,728
Likes
379
Rating
4.88
P
PrintablesINUX3D

The TerraPi X , Prusa Edition - Single SSD Case for Raspberry Pi (all models)

This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…

Downloads
3,681
Likes
874
Rating
4.81
P
PrintablesMichael

Raspberry PI Zero 2 (W) case

Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws

Downloads
3,533
Likes
231
Rating
4.94
P
PrintablesCarter

SnapCase For Raspberry Pi4B

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…

Downloads
3,448
Likes
713
Rating
4.96
P
PrintablesGrevTech

Raspberry Pi Pico Case

Raspberry Pi Pico Case. Two versions, one with the pins facing up and one with the pins facing down (pictures only show pins facing up version right now). Make sure you download the correct files because the different versions are not…

Downloads
3,443
Likes
207
Rating
4.77
P
PrintablesCarter

Raspberry Pi 4B Case (SnapTop) fits SenseHat

Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…

Downloads
3,193
Likes
400
Rating
4.88
P
PrintablesFAYRON

MACH 1 Gen.1 - Raspberry Pi 5 Enclosure

The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…

Downloads
3,116
Likes
470
Rating
4.94