9,900 models
An interactive robot that anyone can make! Otto walks, dances, makes sounds, avoids obstacles, you can code on your own and even customize, it is completely open source, Arduino compatible and 3D printable. Features 💻 Programmable with…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Sample model for Original Prusa MK4. Designed to be printed entirely without supports. Featured in the Prusa Academy postprocessing course . Author: Prusa Research (Vlado Turek)
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
Building a biped robot that moves around like a person is a significant challenge, but you don’t need much experience to build a robot like Otto. Humanoid is also sturdier than the previous versions and includes various upgrade it’s code…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
Infill: 10% Layer hight: 0.25mm Printing time: 4 hours Filament: PLA
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This model can be printed in one go and assembled using the instruction manual. It is possible to print a colour change after 3mm to give the robotarm some more depth and look more industrial. A full package for a nice present, puzzle…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
The most emotional robot ever of the Otto family is back!. Thanks to our own developed LED “Eyes” combined with all te dance moves, touch sensor and sound gestures of all the other Ottos. you will be able to program your STEM robot to…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Make you robot more visual and animated with this great OLED display you can add it in front of Otto as a mouth to display variables, numbers, messages, sensor values, icons. It could also be adapter as a replacement for your robot eyes.…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
I wanted to challenge myself a bit and do some reference-based modeling in fusion360. I decided to work on Johnny 5 from Short Circuit. This was a fun and challenging project with many roadblocks that forced me to think outside the box.…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
This is a remix of the model linked from Thingiverse. I modified it to be stronger and more play-friendly for my son who really wanted an Astrobot toy. Printed with PLA. Note : the antenna prints OK but it does fall of quite easily if not…
Print approx. €13.52–€16.53 excl. taxPreliminary estimate for one variant
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Update! Modified model- After the comments, I increased the tolerance even more for freer movement of the octopus joints Armored Robotic Octopus Recently I like to create models with movable joints printed by Print-in-place, here I…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
A bacon hair skin from roblox
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
Visualization of the XYZ coordinate system, including rotation of the FANUC/ABB robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "It's Probably Fine" with a Nat 1 D20 and…
Print approx. €6.47–€7.91 excl. taxPreliminary estimate for one variant
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
This is the Robin logo. Best to print in two colors. This logo is perfect for any Robin costume. Be the amazing boy wonder, incredibly-talented and acrobatic sidekick to Batman, also known as Dick Grayson (or other versions, including Tim…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
¡Oye! El Goblino - DOORS Print this cool and easy figurine of El Goblino, a character from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. This model comes in two parts, head and body. Both can be printed without supports…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Hello, tomorrow problem sign. G-code with embedded pause to swap filament color manually. Thanks for your download, enjoy the print!
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant
Wire Bender Tool a 3D printed solution for bending steel wires with ease. Crafted for practicality, this tool is designed in two separate parts to enhance durability. It's capable of bending steel wires of up to 1mm in diameter…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for one variant
I made this for my kid. Exported from Roblox.
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
Barbie-like dollhouse furniture: All printed with 0.4 mm nozzle: Wardrobe - fully printable without support. Use 1.75 mm filament as a connector for doors. Table - I suggest to print “loose” version to put legs into countertop easier.…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Layer Height: 0.15mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed Yes / recommended Infill: 15% Print times: Total: 3h32m / 2h22m white / 1h6m blue / 4m black Need help? Find me on Discord: https://discord.gg/qanRKqz8xA
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
VITULUS is mostly printed mobile robot based on ROS. Visit https://lacina.dev or https://discord.gg/YqeNV5hEVN for more. You can see assembly of currently published parts in zipped .step file. Parts Wheel…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Arjen Robben : Soccer Player : Trophy
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Seriously, who even likes these things? Worst thing to get at Easter. I coated the print in sugar and it tasted the same, minus the chipped tooth (just kidding). This is a fun swap-prank or decoration if you please. I included a picture…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
For better attachment of the back wall. Nail hole diameter 2.5mm. Variants: 1 - height 2mm 2 - height 2mm + recessed nail = with supports 3 - height 1mm Printing: Layer 0.2mm Bottom layers 5 Top layers 5 Material PETG Supports only for…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
A non adhesive method to mount a Firehouse 2 LED strobe light to a DJI Mini 2. This mounts to the rear top by clipping on the rear vent ports in a secure fashion. Modeled against the DJI Mini 2: https://www.dji.com/mini-2 2 LED Firehouse…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
I got inspired by the silent front roll (TPU) from nks . This is a remix to fit a Roomba S9+. Print the axis in PLA and the wheel in TPU. Then just replace the original wheel. No additional hardware is needed. Other Roomba models use a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Voroni Robo Aplaka The most popular alpaka on Printables which is better known to owners of Prusa Resarch printers, remixed to the Voroni style Filament: ERYONE Dual color PLA ( GOLD and PURPLE ) Printer: Anycubic Kobra 2 PRO
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for one variant
Batman & Robin Movie Logo. Batman and Robin-Logo is printed in two-color-mode.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
I printed two probe spools to better organize my pellet grill temperature probes. I designed this magnetic hanger to keep them handy on the grill. It has two pockets to glue in 12x3mm magnets. It could also be used to hang other things as…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Spacers for IKEA Skådis are accessories that allow you to mount the perforated Skådis panel on various surfaces, such as walls or wardrobes, while maintaining some distance between the panel and the mounting surface. This spacing is…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Tired of spending more than you want for a closet/wardrobe door knob from a big box retailer? Well look no further! Here you'll find a knob design with a print-in-place hole to secure your nuts and provide a tight hold of your…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
EN: 2WD robot explorer, with improved laser distance sensor. Driven by Arduino UNO. Manual to build is attached as pdf. Also Arduino ino code. Known issues - sometimes, robot is not going direct - because motors are not synced in the same…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
My RoboVac tends to get stuck under objects which are just the right height for it to fit under and not be able to leave, especially the fridge and some rolling chairs. This bumper lip raises the height of the bumper by 3.6mm to prevent…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for one variant
Just print 4 of the feet for you Leifheit Pegasus 150/180/200 and clip them to the stand. Printed in standard Prusa Slicer settings in PLA. No supports needed.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Wardrobe Space Saver This is a space saver for your wardrobe. The hook can move freely and lock into 3 positions, you can also turn the hook 360°. There are only little supports needed for the print and the hook joint is printed in place,…
Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Love, Death & Robots (stylized as LOVE DEATH + ROBOTS ; represented in emoji form as ❤❌🤖) is an adult animated anthology television series created by Tim Miller and streaming on Netflix. Although the series is produced by Blur Studios,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The rubber part got brittle, so I decided to make a whole new wheel, even a bit more grip added with the spikes… no supports .3 mm layer hight 4 top and 4 bottom layers 3 perimeters PETG pretty easy print
Print approx. €12.58–€15.38 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have here for you the Unitree G1 EDU U2 Humanoid Robot . You may know it from the Alza battery. It is really fully authentic. Nice for an exhibition. I really like these movie accessories. Good luck with the printing! I used…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
Small jewelery hanger for rings and chains. 25mm tall and 33.2cm when printed and installed in pairs to fit the inside door of IKEA closet. Fixed to closet door with double-sided tape File is cut in half with a puzzle inspired dovetail…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
How often did my Roborock bump sensor-first at the Tripp Trapp bar? too often… The bar at this chair is perfectly aligned to avoid the touch sensor but to crash the optical one… well thank you. So here is a clip / lock on cube to be…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
Case for Deek Robot Power Meter. Print settings: Material: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES (like last picture) What you need: 4x 3mm threaded insert 4x M3 screw 4x 4mm banana socket 1x switch (d=6mm) 1x 9V…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
These mounts can be used to affix strobe lights to your drone for greater visibility and to meet FAA nighttime flying requirements. They were designed for the Firehouse Arc V strobes lights, but could also be used for anything of similar…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
The rod bracket from an old piece of furniture broke and couldn't withstand the weight I was putting on it, so I designed a sturdier one that matches the original version. The bracket can accommodate a 20mm rod . Assembly instructions 3D…
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant
Triboelectric nanogenerator (TENG) is a new type of generator for “green energy”. In our study, a novel “pause-and-insert” and “print-in-place” 3D printing approach has been devised, employing widely available fused deposition modeling…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Kleiderstangenhalter für 20mm Durchmesserstangen. Leichte und einfache Positionierung durch Mittelloch. Innenabstand für die Kleiderstange = Gesamtlänge minus 2x 3,5mm. Zur Montage: Erst eine Seite Halter verschrauben, dann die zweite…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Diameter = 29mm.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Basic drawer/wardrobe/dressing door handle with triangle model. Based on my previous wheel knob :) For fixing you can use M4 screws.
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
Coin with engraved dragon symbol. Uses art from PublicDomainVectors.org .
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
A wardrobe bracket for a 15 x 30 round rod. To be mounted using 4 mm screws. DISCLAIMER: Neither mechanical nor thermal tests have been done. It is unknown how much weight the bracket will hold. CREDIT: this “thing” is very much inspired…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
This is a resized lower body component for the spirographic WDT tool, making the tool compatible with the portafilter on the Cafelat Robot. You need to print all components from the original design, except the lower body, and follow the…
Print approx. €6.42–€7.85 excl. taxPreliminary estimate for one variant
pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
I really had to go for it … This bad boy is a filament print of the robot in mutible pices to combine to a 1,5m tall version. This print is done with regular cheap PLA filament since it was intended to be painted from the very beginning.…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
This is meant as an educational tool to demonstrate a grasping mechanism for a robotic arm. I used a remix of the “Flexible Grippers” by PrintChallenge but implement with a method for faster actuation so the way in which the compliant…
Print approx. €8.54–€10.44 excl. taxPreliminary estimate for one variant
This is a remix of the Suspended Filament Holder, modified so that it uses metric M4 x 16 screws and 22mm OD PVC pipe. The Parts Required for 1 Filament Holder are: 1 x LH Side 1 x RH Side 1 x Top Support 2 x End Stops 4 x M4x16 Cap Head…
Print approx. €5.88–€7.19 excl. taxPreliminary estimate for one variant
Hello, I have Unitree Go2 Robot Dog for you. You may know it from Alza's bag. It is really fully authentic. Nice for an exhibition. I really like these movie accessories. Good luck with the printing! I used PLA/PETG as the material. You…
Print approx. €16.93–€20.70 excl. taxPreliminary estimate for one variant
Base for the roborock s6/s5 max, protects the floor from the moist cloth. Use PETG or PLA STANDARD 0.2mm STRUCTURAL This base is 5.2mm high = easy docking
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for PETGSource material: PET
For the regular maintenance of my Roborock S8 i needed a simple solution to protect the laser tower while the robot is laying upside down. Technical Data: inner diameter: 90mm angle: 8° height at the lowest point: 22,5mm Print settings:…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Ich habe diesen kleinen Roboter als kleine Lampe für den Schreibtisch und als Gadget designt. Der Roboter hat im Innenraum Platz für eine Knopfzellenbatterie und kann drei farbige Dioden aufnehmen. Im Kopf befindet sich eine Aussparung,…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
Hanger hook for purse, etc. 38mm internal diameter for wardrobe rod. 50mm length of the hanging place. Print tips: supports required
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
(English below) @vogon hat ein nützliches Modell einer Halterung für die Messspitzen der Oszilloskop-Serien Rigol DHO800/900 (S) entworfen. Mir war die Platzierung am Arbeitsplatz jedoch zu unflexibel, weshalb ich mit Zuhilfenahme eines…
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant
Wardrobe under the stairs Skříň pod schody Print instructions For : https://www.prusaprinters.org/cs/prints/42267-staircase-for-a-dolls-house
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Robinson R44 Raven II Helicopter Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
More large robot prints are comming up :) …. This one is based on a the cover art of the SciFi novel “Isaac Asimov's Robot City”. In Particular the German version of the first book of this series “Die Odyssee”. The book appeared in 1988…
Print approx. €22.22–€27.16 excl. taxPreliminary estimate for one variant
I designed a tailor make support for my wardrobe hanging rail to prevent it from bending and twisting when I put a lot of clothing items on it. I used a vernier to measure the width and height of the rail. You have to adjust the size of…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
I needed to test some button cell batteries but my cheap multimeter had no built in load resistor. This super simple tool help clamp a resistor and dupont jumper wires to the probes. I used male-male dupont wires, removed the plastic…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
This striking Robin Hood statue captures the legendary outlaw in a dynamic pose, embodying both his role as a noble avenger and a skilled hunter. Dressed in his iconic hooded cloak and leather armor, he stands with his longbow drawn,…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
hooq is a versatile, usable storage and wardrobe system. The hooks can be positioned freely along the rope. As soon as they are loaded, they get jammed and hold the height. This is how countless garments fit comfortably about each other.…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Holder for Robotdyn Dimmer module with 2 M3 mounting holes https://www.aliexpress.com/item/1005001965951718.html
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Crank wheel for the Comgrow ROBO CNC router Printed in PLA or PETG 3-4 perimeters 0,2mm layer-height 10-15% infill Additional parts: 1x M4 x 40mm screw 12x 3mm x 10mm sheet metal screws Montage and installation video: Handrad für die…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
My wife had a new desktop setup, where she had a good monitor, so she needed her laptop closed with the USB-C port exposed to the docking station. I created a stand with 4 separate printed files which click together to one good stand. No…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Simple mount to hold Amazon 4.5 inches strobe LED. The mount is designed for ATV 3/4 inches tube rack. Meant to be secured under the rack and to be held by zipties. I can create other models for other size tubes upon request. To have the…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
In my approach, I have a few spare mops, so there is always a clean, dry mop while the others are waiting for laundry or drying. I also have two filters, one of which is in the robot, and another one is drying/waiting for replacement. You…
Print approx. €8.60–€10.51 excl. taxPreliminary estimate for one variant
Prevent your robot vacuum from driving over low furniture feet with these simple and effective clips. Designed to securely hold furniture feet in place, these clips provide a barrier that keeps your robot vacuum from getting stuck. Ensure…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A mix with octopus and robocop. Use a paint support if you want with g code included
Print approx. €3.65–€4.47 excl. taxPreliminary estimate for one variant
A decorative organiser that can be attached directly to the robot hoover's docking station. As you might have guessed: our robot is called Rocki ;) The organiser was printed in one colour and then painted. Model vacuum robot: Roborock…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Quick printing test probe to fit the J6 gripper mount on the AR4 robot from Annin Robotics . The probe tip has a known distance (50mm) from the gripper mount plate that you can input into the kinematic model and the PLA is forgiving if…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
