Liczymy pasujące modele…
This is an X-shaped book stand/display designed to be sturdy and cheap to make. Just print it out and slot sides A and B into eachother. I've included a second stl that shows what it looks like assembled. 70% scale (shown in the photos)…
This is a basic compact shell for the Arduboy Mini with room for a small battery… It prints without supports, and just clips on without fasteners. It has very thin areas in the top and bottom so it looks nice with translucent filamence…
A little case that holds a few Ricoh GRIII / GRIIIx batteries (Ricoh DB-110 or Olympus LI-90b) The goal is just to hold batteries securely to protect the contacts and keep them from moving around awkwardly in a pocket or bag. I've tested…
Update 8/2/2025: After using this for several months and feeling like it looked slightly off, I re-measured and discovered that the rotation was off by about 1 degree 🤦. I've uploaded version 0 2 9 .stl's and blender files here which fix…
This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries……
This is a significantly improved version of my compact arca-type tripod plate designed to fit the Ricoh GRIII / GRIIIx. See the end for details about what's new/different. Pictured here in Protopasta dusty smoke HTPLA and Prusament PETG…
This is a relatively low profile 40.5mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as the default Olympus/OM System filter adapter CLA-T01. I suggest printing the…
This is a low profile 49mm threaded compact lens hood/shade with a few versions. I recommend printing at 0.10mm layer height in PLA for best results with the threads, but it should be fine at 0.15 too. Fuzzy skin modifier makes it look…
This is a small grip + thumb grip + strap connector designed to fit the right side of the Sigma fp. It's designed to line up with the bottom edge of the screen to continue that shape forward, and extends the existing thumb grip shape…
This is a shoe-mounted thumb grip for the Ricoh GRIII. Its low profile design is somewhat inspired by Squarehood's thumb grip - but unlike that one and any others I've seen online, this design positions the thumb grip wing in a way that…
DISCLAIMER : I'm not a biologist, and I'm also not very good at sculpting yet... So probably don't trust this model to be very accurate! It's just for fun. I saw this thread about a devil's hole pupfish toy and thought it was cute but…
A compact grip and arca-type tripod plate for the Nikon p300 series. This adds a Ricoh GR - inspired grip, a bottom right strap connector, and arca type tripod mounting plate to the camera. Pictured here in neon green translucent…
Update 4/15/2026 This update makes it clip onto the body's strap lug tighter, to reduce flex. About the design Combination arca-type tripod plate and grip for Nikon 1 J5. I'm not going to act like it's perfect, but this grip shape has…
This is a very compact arca-type tripod plate designed to fit the Fujifilm X-T4. It's designed to match the shape of the camera body and brace against it to stay secure, while leaving plenty of room to get the battery out without removing…
This is a grippy case for the Tamagotchi Uni, in variations with and without a carabiner, and held together with either zipties or threaded inserts. Design ideas The general idea is that the Uni is already pretty durable, being made out…
I've designed hotshoe covers before, but none I was super happy with because they had to print vertically. This one is designed to print with the top side down, so it's a lot faster and easier to produce, and you can get a textured bed…
There's a new version! See https://www.printables.com/model/543609-new-version-ricoh-griii-griiix-compact-arca-tripod ! --- This is a very compact arca-type tripod plate designed to fit the Ricoh GRIII / GRIIIx. Note: It has only been…
A grip, tripod plate, and bottom right strap connector for the Nikon Coolpix A1000. Pictured here in Prusament PETG galaxy black. I recommend adding some fuzzy skin with a box modifier to make it feel nicer! The problem The Coolpix A1000…
Three variations of a printable replacement for the Wheeler & Wilson No. 8 glass presser foot. Designed by taking measurements of an original foot from my mom's machine. There are three versions - one with a hole size similar to the…
New version here: The new version has changes to the mounting point options and makes the overall shape a bit more squared out, there's nothing really wrong with the older version on this page, I just wanted to make what I think is a…
A chunky grip and vertical + horizontal arca-type tripod plate for the Zhiyun M40w pocket floodlight. It includes a hole for the USB port to keep charging, and plenty of room to adjust the dials without removing the grip. Pictured here in…
This is a very compact arca-type tripod plate and bottom right strap connector designed to fit the Fujifilm X-E2. It probably will fit on the X-E2s and X-E1 as well (maybe x-e3? not sure), but I haven't tested on those - If you're able to…
This is a very compact arca-type tripod plate designed to fit the Ricoh GR (first gen APSC). It probably will fit the GR II as well, but I haven't tested on that - If you're able to print a copy and give it a try, please leave a comment!…
Update 4/15/2026 This update makes it clip onto the body's strap lug tighter, to reduce flex. About the design A lower profile, more-pocketable version of my grip and tripod plate for the Nikon 1 J5. Designed to keep your hand close to…
NOTE: The .stl is oriented with the bottom side up, just because of my process in blender… You probably want to put that side down when you print it 👍 This is a very compact arca-type tripod plate designed to fit the original Pentax K-3.…
This is a new and improved version of my compact arca-type tripod plate designed to fit the Ricoh GX100 and GX200. Pictured here in Prusament translucent PETG with 100% perimeters for no reason, I just thought it looks cool with the…
Updated version: https://www.printables.com/model/1056020-fujifilm-x-e2-compact-arca-tripod-plate - The new version braces against both sides of the camera to reduce wiggle, and is shaped to be more comfortable to hold. ----------------…
When I got my TG-7 I was impressed with how rugged it felt! Then I dropped it on concrete from a height of like 2 feet and snapped the plastic zoom lever in half. Fortunately, their support service repaired it very quickly for free -…
A flat, rectangular hood for the Sigma 30mm F/1.4 DC DN. It probably shades the lens a little, but it's main purpose is to prevent accidental lens-touching while using the camera out and about without a lens cap, while being less bulky…
Note: The original version of this design did not work in some arca clamps because the wedge part was both too wide and not tall enough. This version should work with most tripods. Leave a comment or post a remix if you have any issues!…
This is a very compact vertical arca-type tripod plate and strap connector designed to fit the left side of the Sigma fp. It's designed to clear the USB and mic port doors, and has enough room to fit an hdmi cable if you remove the hdmi…
This is a tiny strap connector designed to fit the left side of the Sigma fp. It's designed to clear all of the port covers, and leave room to not interfere with your fingers holding the camera on the bottom left side. It includes a top…
This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Sigma fp. I've tested it with these screws: https://www.mcmaster.com/92220A181/ and there is an image attached with the specifications, since…
This is a little wedge-shaped cold-shoe mount adapter intended for attaching pocket floodlights to compact cameras. By being wedge-shaped, it gives you the option to point the light slightly up or slightly down, which I find more useful…
I have been using this k-mount rear cap for years https://www.thingiverse.com/thing:184905 - but I recently realized that the wider base takes up a bit more bag space than it needs to, and when I'm trying to use a really tiny bag, it…
A sliding adjuster for half-inch webbing. Made as part of my small camera wrist strap project.
There's a new version! See https://www.printables.com/model/597188-nikon-coolpix-a1000-grip-and-arca-tripod-plate-upd This is the first one of these custom compact arca-type tripod plates I designed, and it's a bit cursed, but there's a…
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
While I love making camera-specific bottom plates and really tiny options to keep in my bag, I've been meaning to make some 'big' versions for a while. These ended up still being quite a bit smaller than my favorite 'real product' arca…
There's a new version! See https://www.printables.com/model/597137-ricoh-gx100-gx200-arca-tripod-plate-updated This is a very compact arca-type tripod plate designed to fit the Ricoh GX200. It probably will fit the GX100 as well, but I…
An updated version of my tiniest tripod plate . This version brings incremental improvements to stiffness and printability, while still being very compact and offering mounting positions that make it compatible with most cameras…
About the design This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Olympus C-5050 zoom. Note - I have an alternative version of this now, which is a bit thinner, has a bit wider base, and a more…
While I love making camera-specific bottom plates and really tiny options to keep in my bag, I've been meaning to make some 'big' versions for a while. These ended up still being quite a bit smaller than my favorite 'real product' arca…
About the design Bottom plate + tiny hand and thumb grip for for the Pentax Optio S and S4, with a vertical arca-type tripod plate incorporated into the grip shape. Designed to match the characteristic radial groove design of the body,…
Several variations of a flat push-on hood for the Brightin Star 35mm f/0.95. For the record, I don't recommend this lens, you probably shouldn't buy it unless you find one very cheap on ebay. But if you do, you can use this on it, I…
About the design Low profile arca-type tripod plate designed to fit Olympus E-10 and E-20. It's designed to match the lozenge shape on the bottom of the camera, just because I thought that looked nice. It has room for a strap connector on…
About the design This is another very compact arca-type tripod plate and bottom strap connector designed to fit the Olympus C-5050 zoom. After using my first design for the C-5050 for a while, I liked how it matched the angle of the…
I just got my GRIIIx back from repair after 3 months! And the rubber USB port door immediately decided to crack and fall off... While you can order rubber replacements on eBay, it seems like that part is actually a pain to get to, since I…
To wszystkie aktualnie dostępne wyniki.
![Ricoh GRIII / GRIIIx Compact Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/543609/images/4373777_127f5993-85b5-4064-8c47-d8896a24f406/img_6615-2up.jpg)
![Grip + Tripod Plate for Nikon 1 J5 [UPDATED 4 15 26]](https://media.printables.com/media/prints/a28efbd4-f6f1-4877-8adb-b419a5fb8bbe/images/12473768_41fe9576-0373-48fa-8ce5-8d15165823f0_85893571-6b95-4415-b753-2c3a749d0f84/dsc_3318.jpg)
![Nikon Coolpix A1000 Grip and Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/597188/images/4755255_1800b8d0-6da9-492b-9b17-c8c8b96d3b82_8fe4b957-24f8-472a-a3b7-e527240c87d3/dscf2501.jpg)
![Ultra Compact Arca Plate and Strap Connector [Old version]](https://media.printables.com/media/prints/174682/images/1640285_b24082d5-3e2a-4237-bc92-718b9d381e33/large_display__r002618_174682.jpg)
![Fujifilm X-E2 Compact Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/1056020/images/7999454_1e678e70-5c75-4315-984f-f5d5ed9e388f_11624ebf-8e29-4620-a794-c1ce2ebf5baa/dscf1286.jpg)
![Low Profile Grip + Tripod Plate for Nikon 1 J5 [UPDATED 4 15 26]](https://media.printables.com/media/prints/41e68098-d6c1-496c-8ae4-681d807ff5b7/images/12491616_470b053a-b6f6-496b-a040-6c3381c66dbd_749d5bbd-3c2a-462c-bfa8-464aeeaf19f7/dscf1009.jpg)
![Ricoh GX100 & GX200 Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/597137/images/4754777_14ec3d5c-362a-4350-a5f1-d2f152ac7dd7_3a52c1ff-c46b-4fc7-a515-12d5f8b6a7d3/dscf2515.jpg)
![Ricoh Theta Compact Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/174691/images/1640358_51c3e30b-1bbc-44e0-bbf4-72995db4251f/large_display__dsf0874_174691.jpg)
