1898 modeli
Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 20% Filament : PLA
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement cargo net latch for a 2016 Ford Edge. I got tired of buying new cargo net latches when they broke.
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Have a look at the complete skeleton here: https://skfb.ly/p7uv7 3D scan of a Protoceratops ( Protoceratops andrewsi ) skeleton. Protoceratops andrewsi was a horned dinosaur (Ceratopsia) the same group to which the Triceratops also…
Wydruk około 23,55 €–28,78 € nettoWstępna wycena jednego wariantu
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Dlžka tlače 31min, tlačené z petg 0,2. Rozobrať obmedzovač, vymeniť za zodraté stare plasty. Pohyb dverí je tuhší, predpokladám, že sa skôr vyderu, ako originaly.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clip mount v2 Having the original model in place these last couple of months, I liked the simplicity, but truth be told I missed having the vent accessible. So here is an updated version that straddles the emergency lights button and…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnifier: Peak 2015 Mini Comparater 7X Thats is ok. Print Settings Material: EkoMb - Petrolblue Petg Nozzle: 0.4mm Layerheight: 0.2mm Post Process Not necessary
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
spiral step 5015. spiral for prusa mk4 fans coming soon
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
____________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
Update : Revised STL to rotate matching recommended print configuration and repaired non-manifold issue some people experienced. The stock S1 cooler isn't exactly great, and I wanted a bi-directional cooling design with a stronger 5015…
This part was originally on thingiverse. I will move it here as the site had problems with stability and spam. Feel free to browse the comments and makes here . This is a custom hotend duct, which uses the stock fans and improves part…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Printer mods: Tool holder Filament spool handle…
UPDATED 5-7-2023 7:10PM PDT: Updated to include the missing shorty version: Neptune 3 Pro Shorty Shroud -5015 Fan.stl UPDATED 5-7-2023 10:30AM PDT: Now supports ADXL345 accelerometers. Updated the two shrouds and two fronts to have mount…
Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…
This is a 3D printed 5015 type blower/fan that is suitable for Prusa i3 or any other type of printer. I used a spare fan ( Multicomp MC36257 with sleeve as bearing) that I had laying aroung and modified it to use it with these 3D printed…
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
V5 Duct added, has better aimed cooling but i have not tested yet Rear mounted 5015 parts cooling duct for Sovol SV06 V3 released, cleaned internal geometry, made the mounts work better and gave the duct better clearance 2 M3x20 bolts and…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Yes, A remix of a remix. TL;DR stock hotend printers use: Duct_Left_Stock.stl Duct_Right_Stock.stl ⠀ I really liked the shroud and my V3 SE was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present…
This is just a remix of https://www.printables.com/model/361794-sv06-5015-part-cooling-duct. I rounded the corners which could potentially give it better airflow. I saw someone request it in the original comments and figured I'd take a…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
V4 update (September 29, 2024): Removed the ugly circular overhang at the bottom Changed duct geometry for better airflow alignment Supports inside the ducts are no longer needed These toolhead covers allow to install a 5015 or 5020 part…
Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…
LiteBurner KE Join my discord! https://discord.gg/uYBuFXUmcU I couldn't find anything I liked , so I made my own design. It accommodates 2x 5015 blowers and is designed to be printed without supports. On the right side, there's a slot for…
Check out also my Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder To silence the fan even more, print my Snap-On 5015 Blower Silencer Design: I have created this model with the following considerations:…
I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :) I managed to print the left one without any supports and for the…
HEPA/Carbon filter box for the Bambu Lab X1C 3D Printer. Kudos to the previous designers, for the great idea to have a modular filter box. The original used 40x10mm axial fans and exhausted at the top. The version I worked off of was a…
I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)
This is a 5015 fan inlet for EVA 3 where the fan is oriented parallel to the backplate. Use this part if you have not enough space in the back of your printer for the new fan orientation of EVA 3. Print one of the three arms to attach the…
This replaces the stock 4010 Fan with a 5015 Blower. Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts to mount the Fan and (2) M3x20 Pan Heads to mount the Shroud. Fans I used:…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
simle clip to cancel the rattle and vibration
Ender 2 Pro / Ender 3 - 5015 part cooling fan duct with easy to install magnetic mount. Compatible with separate CR touch mount. Minimalist, compact and flexible design. This design has considered easy remix of your own mount for other…
An optimised part cooling duct for a Creality S1/Pro/Plus using the Creality Sprite extruder to maximise airflow and reduce back pressure on the 5015 fan. It is a remix of the hero me gen 7 single 5015 fan duct to make it fit for a…
Creality Ender 3 S1 Creality Ender 3 S1 Pro High Flow Modular 5015 cooling duct sprite extruder This a more refined version of the Ender 3 S1 Twin Jet 5015 Fan Duct that is a little easier to print (less supports). It also doesn't require…
Measured dampening is 4dB on my 5015 S1 hotend mount, measured on bed. There is very small flow restriction after mounting. See my other model for the 5015 Ender 3 S1 & Sprite Extruder part cooling duct ____________________ Printing…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
BOM (Book Of Materials): 2x M3 nuts (for the fan) 3x M3x25mm screw 1x M3x6mm screw 3x M3 Washers (for the M3x25 screws - optional) 1x 5015 Blower fan Instructions manual : https://www.thingiverse.com/download:7569024 If you dont know what…
I created a new pipe for the 5015 fan. It is printed without supports. On the triangular surface where the fan is mounted. This one is with ball bearings. The flow is much better than with the original fan. The fan is at an angle. It…
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
This model is compatible with the lego system.
This is a new totally redesigned version of my popular Satsana fan duct for the Ender 3 and other compatible printers. See my previous designs here: Satsana Ender 3 Fan Duct Satsana 5015 Fan Duct for Ender 3 / Ender 5 / CR-10 Dual 5015…
Compact and lightweight Fan Duct for the Ender 3 V2 for 5015 Blower with BLTouch Mount. Just one piece. No support needed. Probe Offset: X-35 Y-8. Z should be around -2.2mm. You only need one M3 nut for the Fan Duct. Weight: aprox 40g…
AD5M Recirculating Air Duct - 5015 Fan This model is for adding a Recirculating Air Duct to the Flashforge Adventurer 5M (non-pro) to pull air through the HEPA filter and vent it back into the print chamber to maintain chamber…
Micro Swiss NG Dual 5015 V2 Fan Shroud with CR Touch Mount. Supports required, from build plate at a minimum however support enforcers or custom supports would work better Redesigned to be more compact, feedback from users indicated that…
This AD5X recirculation duct and blower fan, A thank you to Jwidess for this design This is designed to be printed with PETG because of chamber heat, you won't need abs or asa because the chamber heat won't get that high. PETG can handle…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
I'm not as professional as OrzOrzOrz and therefore the model might not be as perfect as the original. As for the original, I printed it with the front facing down and used only support for the front fan base. A demo video if the Printhead…
This 5015 fan shroud is part of print head ASSY for Kingroon KP3S. See the “ KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon ” page for more information. ────────── Update [ July 30, 2023 ] In addition to the…
Hello I made this fan duct for sprite extruder. It is still in testing but for now everything works fine. Im pretty new to Fusion 360 and i made it for learning purposes. You need: 2x 20mm M3 screws 1x 12mm M3 screw Suggest you to print…
This is only possible thanks to all of my present and past patreon supporter. So a huge shout-out to them!!! ------ Full model is on my https://patreon.com/squirrelf3d - linear rail version - many supported hotend ( list here ) - some…
This fan duct is designed for the AnkerMake M5. It uses a 24v 5015 blower fan and is attached to the front of the extruder using existing screw holes. Supports will be needed for this print. This fan duct is not compatible with the M5's…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
Hi, guys. I'm new to this forum and the whole 3D printing world, but I have upgraded my first fan duct for my Ender 3 v3 SE to dual 5015, and the performance is pretty good. The mounting hole and hook of the left-side duct are still hit…
CR6 universal dual fan 5015 part fan shroud This part fan solution provides a dual fan shroud and uses a 5015 blower fan that will fit on most hot ends (checked with stock, Dragon, Mosquito and MicroSwiss hot ends). The part replaces the…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
Overview This is a simple, one piece, minimalistic, and high perfomance Fan duct for Ender 3 or printers with same x-gantry plate. It is highly inspired by ammaryasir's remix of Satsana fan duct . It is also compatible with SpeedDrive (3D…
New versions available: Single Fan: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v Dual Fan: https://www.printables.com/model/543502-the-amonite-sovol-sv06-fan-duct-dual-5015-blower-f Designed…
A remix of @Anollya_1115736 M8P Fan duct but with @SimplifiedLife's Vents from his Octopus Duct, I increased the walls to be thicker on top and sides for it to be more sturdy (the original cracked for me, and a optional bracket to use if…
Lates update 27/07/25 Three air outlets (beta): a central duct has been added to complement the two classic side outlets, providing direct cooling to the nozzle and improved wraparound airflow on the printed part. Designed exclusively for…
Printed in PLA. Used brass inserts for the supports and the ADXL holder on the fan cover. The back support includes a cutout for insertion of a cable tie if wanted, may or may not fit your cable ties. I used 3mm bolts for all connections.…
This allows you to cool the part using 5015 fans.
This is a remix of Kevin Coopers stock 5015 single fan model. The shroud and bracket are required to mount it, and then wiring piece is optional if you want some cable management and also have a spot for a tiny buck converter for non 24v…
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
A quick silencer to quiet a noisy 5015 blower fan. Prints quick and easy without any supports. Provided you will also find the step file so that you may improve on this design or adapt it better to your own printer.
These canards were designed and oriented with inspiration from other functional designs for sale. The canards were designed to be printed standing up on the narrow end. It's not the easiest print because of this, but I didn't want the…
Based on the image I've made simple model for my needs - but I'm pretty sure it's handy for everyone who experiment with mounts and cooling. Outer diamete of the fan is probably not exact as on the image, but from my experience it's…
version 2 of my dual 5015 fan upgrade for the elegoo neptune 3 pro plus and max. This model has increased air flow flow over v1. Helps keep the stepper cool by pulling air directly off uses much less support material, prints fater, and…
Updates: I made following changes to my Satsana 5015 remix for 4020 fans and BLTouch: Changed the position and the mount for the BLTouch. The mount is now on the left side and fully integrated into the shroud. Change the X, Y, Z offsets…
May I present the arch villain to all of your heroes, the bad guy dressed in black. NEMESIS! Enjoy! edit: New inductive probe version & heat insert version included for E3DV6 systems. NOTE a firmware change is required to use the…
Link for the fan I have used: https://www.amazon.co.uk/JZK-2PCS-5015-blower-Speed/dp/B0C8TDZ7H6 Orientation: As shown above. Layer Height: 0.2mm Walls: 2 Infill: 30% For the assembly you will need: 2 x M3 x 14mm screw for the parts coling…
NEW VERSION 3.1 with recessed hex nuts and more clearance for CR-Touch (STL and OBJ formats). 5015 fan upgrade mount for Ender Sprite Extruder Pro using stock screws. There are a few similar designs to this, but I took a little bit of the…
Version 2.0 is ready now! This is a more “Hornet-style” implementation with the triangles and sharp edges. Also the BLTouch probe is a separate part as not all owners use ABL. All parts are to be printed as set in .stl files. Use supports…
Credit to https://www.thingiverse.com/thing:6297778 for the blower mount. (EDIT found that on printables too so it's credited in the remix now, thanks T3Kmaker) Tested both versions extensively now. I'd recommend the curved version, I'm…
At the intersection of innovation and function, we proudly present the Elegoo Neptune 3 Pro FanFlow Fortress Extruder Cover, a testament to precision engineering and performance enhancement. Designed for the discerning 3D printing…
I wanted a two-fan setup so I added this Left Side Mount to match what I had on the right. It attaches with the original M3 screw. You'll need two M3x30 machine Screws with Nuts for the Fan. If you Make this one… Be advised that you'll be…
Designed to securely hold your iPhone 12 or newer while still allowing easy access to the cupholders and parking brake. No supports needed. Parts used: Apple MagSafe Charger (1m): MagSafe Charger (1 m) - Apple *note: this is the 2024 25W…
This is a two piece mount for a 5015 fan upgrade, for a stock Artillery Sidewinder X2. I designed this to be easier to assemble, and to use the screws that came with the SW-X2 to attach to the printer. Designed for nut Size M3-0.5mm…
Version 2 Rethink my fan duct with one 5015 fan and opposite airflow and visible nozzle
Important Assembly Notes: You will need to replace the stock screws for the mounting bracket with M3x6 or M3x8 screws. In my case, I pressed an M3 threaded insert into the fan on the side closest to the mounting bracket to attach it to…
v2 Changes - 2023-06-13 Increased fan front-to-back tolerances to make assembly easier Greatly improved the wiring spacing to prevent damage during assembly/dissassembly Added cutout to fit the bottom of X1/X1C Increased the Z-height of…
I made an adapter cable from MU-2F and JST M+F. You can look at the video - 13:28
Update: v2 Offset mod for Touch Sensor added. (Last photo) Offset Values added. Setup: You can find pdf document in the attachments for this. Printing: You have to use PETG or a heat resisdant filament to work properly. You can choose any…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
